Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reduce resource consumption per-transport to make way for increasing
the credit limit and maximum r/wsize. Pre-allocate fewer MRs.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

/proc/lock_stat showed contention between rpcrdma_buffer_get/put
and the MR allocation functions during I/O intensive workloads.

Now that MRs are no longer allocated in rpcrdma_buffer_get(),
there's no reason the rb_mws list has to be managed using the
same lock as the send/receive buffers. Split that lock. The
new lock does not need to disable interrupts because buffer
get/put is never called in an interrupt context.

struct rpcrdma_buffer is re-arranged to ensure rb_mwlock and rb_mws
are always in a different cacheline than rb_lock and the buffer
pointers.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

An RPC can exit at any time. When it does so, xprt_rdma_free() is
called, and it calls ->op_unmap().

If ->ro_reset() is running due to a transport disconnect, the two
methods can race while processing the same rpcrdma_mw. The results
are unpredictable.

Because of this, in previous patches I've altered ->ro_map() to
handle MR reset. ->ro_reset() is no longer needed and can be
removed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Acquiring 64 MRs in rpcrdma_buffer_get() while holding the buffer
pool lock is expensive, and unnecessary because most modern adapters
can transfer 100s of KBs of payload using just a single MR.

Instead, acquire MRs one-at-a-time as chunks are registered, and
return them to rb_mws immediately during deregistration.

Note: commit 539431a4 ("xprtrdma: Don't invalidate FRMRs if
registration fails") is reverted: There is now a valid case where
registration can fail (with -ENOMEM) but the QP is still in RTS.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

After a transport disconnect, FRMRs can be left in an undetermined
state. In particular, the MR's rkey is no good.

Currently, FRMRs are fixed up by the transport connect worker, but
that can race with ->ro_unmap if an RPC happens to exit while the
transport connect worker is running.

A better way of dealing with broken FRMRs is to detect them before
they are re-used by ->ro_map. Such FRMRs are either already invalid
or are owned by the sending RPC, and thus no race with ->ro_unmap
is possible.

Introduce a mechanism for handing broken FRMRs to a workqueue to be
reset in a context that is appropriate for allocating resources
(ie. an ib_alloc_fast_reg_mr() API call).

This mechanism is not yet used, but will be in subsequent patches.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The connect worker can replace ri_id, but prevents ri_id->device
from changing during the lifetime of a transport instance. The old
ID is kept around until a new ID is created and the ->device is
confirmed to be the same.

Cache a copy of ri_id->device in rpcrdma_ia and in rpcrdma_rep.
The cached copy can be used safely in code that does not serialize
with the connect worker.

Other code can use it to save an extra address generation (one
pointer dereference instead of two).
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAnna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

These functions are called in a loop for each page transferred via
RDMA READ or WRITE. Extract loop invariants and inline them to
reduce CPU overhead.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Allow each memory registration mode to plug in a callout that handles
the completion of a memory registration operation.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The open op determines the size of various transport data structures
based on device capabilities and memory registration mode.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Memory Region objects associated with a transport instance are
destroyed before the instance is shutdown and destroyed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This method is invoked when a transport instance is about to be
reconnected. Each Memory Region object is reset to its initial
state.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This method is used when setting up a new transport instance to
create a pool of Memory Region objects that will be used to register
memory during operation.

Memory Regions are not needed for "physical" registration, since
->prepare and ->release are no-ops for that mode.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

There is very little common processing among the different external
memory deregistration functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

There is very little common processing among the different external
memory registration functions. Have rpcrdma_create_chunks() call
the registration method directly. This removes a stack frame and a
switch statement from the external registration path.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The max_payload computation is generalized to ensure that the
payload maximum is the lesser of RPC_MAX_DATA_SEGS and the number of
data segments that can be transmitted in an inline buffer.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Instead of employing switch() statements, let's use the typical
Linux kernel idiom for handling behavioral variation: virtual
functions.

Start by defining a vector of operations for each supported memory
registration mode, and by adding a source file for each mode.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>