Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 26 3月, 2006 1 次提交
  3. 27 2月, 2006 2 次提交
  5. 17 1月, 2006 2 次提交
  7. 12 1月, 2006 3 次提交
  9. 11 1月, 2006 2 次提交
    • M
      [PATCH] kexec: change CONFIG_PHYSICAL_START dependency · 05970d47
      由 Maneesh Soni 提交于 
      I have heard some complaints about people not finding CONFIG_CRASH_DUMP
option and also some objections about its dependency on CONFIG_EMBEDDED.
The following patch ends that dependency.  I thought of hiding it under
CONFIG_KEXEC, but CONFIG_PHYSICAL_START could also be used for some reasons
other than kexec/kdump and hence left it visible.  I will also update the
documentation accordingly.

o Following patch removes the config dependency of CONFIG_PHYSICAL_START
  on CONFIG_EMBEDDED. The reason being CONFIG_CRASH_DUMP option for
  kdump needs CONFIG_PHYSICAL_START which makes CONFIG_CRASH_DUMP depend
  on CONFIG_EMBEDDED. It is not always obvious for kdump users to choose
  CONFIG_EMBEDDED.

o It also shifts the palce where this option appears, to make it closer
  to kexec and kdump options.
Signed-off-by: NManeesh Soni <maneesh@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Haren Myneni <haren@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      05970d47
    • V
      [PATCH] kdump: x86_64 save cpu registers upon crash · ec9ce0db
      由 Vivek Goyal 提交于 
      - Saving the cpu registers of all cpus before booting in to the crash
  kernel.

- crash_setup_regs will save the registers of the cpu on which panic has
  occured.  One of the concerns ppc64 folks raised is that after capturing the
  register states, one should not pop the current call frame and push new one.
   Hence it has been inlined.  More call frames later get pushed on to stack
  (machine_crash_shutdown() and machine_kexec()), but one will not want to
  backtrace those.

- Not very sure about the CFI annotations.  With this patch I am getting
  decent backtrace with gdb.  Assuming, compiler has generated enough
  debugging information for crash_kexec().  Coding crash_setup_regs() in pure
  assembly makes it tricky because then it can not be inlined and we don't
  want to return back after capturing register states we don't want to pop
  this call frame.

- Saving the non-panicing cpus registers will be done in the NMI handler
  while shooting down them in machine_crash_shutdown.

- Introducing CRASH_DUMP option in Kconfig for x86_64.
Signed-off-by: NMurali M Chakravarthy <muralim@in.ibm.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      ec9ce0db
  11. 09 1月, 2006 1 次提交
  13. 15 11月, 2005 3 次提交
  15. 07 11月, 2005 1 次提交
  17. 22 9月, 2005 1 次提交
  19. 15 9月, 2005 1 次提交
    • D
      [LIB]: Consolidate _atomic_dec_and_lock() · 4db2ce01
      由 David S. Miller 提交于 
      Several implementations were essentialy a common piece of C code using
the cmpxchg() macro.  Put the implementation in one spot that everyone
can share, and convert sparc64 over to using this.

Alpha is the lone arch-specific implementation, which codes up a
special fast path for the common case in order to avoid GP reloading
which a pure C version would require.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4db2ce01
  21. 08 9月, 2005 2 次提交
    • V
      [PATCH] Kconfig fix (BLK_DEV_FD dependencies) · a08b6b79
      由 viro@ZenIV.linux.org.uk 提交于 
      Sanitized and fixed floppy dependencies: split the messy dependencies for
BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making
BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC
to arch/*/Kconfig.  While we are at it, fixed several obvious cases when
BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h
are *not* going to have floppy.c compile, let alone work).

If you can come up with better name for that ("this architecture might
have working PC-compatible floppy disk controller"), you are more than
welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch
below...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a08b6b79
    • A
      [PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity · 54d5d424
      由 Ashok Raj 提交于 
      When handling writes to /proc/irq, current code is re-programming rte
entries directly. This is not recommended and could potentially cause
chipset's to lockup, or cause missing interrupts.

CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the
interrupt is pending. The same needs to be done for /proc/irq handling as well.
Otherwise user space irq balancers are really not doing the right thing.

- Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for
  lack of a generic name.
- added move_irq out of IRQ_BALANCE, and added this same to X86_64
- Added new proc handler for write, so we can do deferred write at irq
  handling time.
- Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead
  it now shows only active cpu masks, or exactly what was set.
- Provided a common move_irq implementation, instead of duplicating
  when using generic irq framework.

Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off.
Tested UP builds as well.

MSI testing: tbd: I have cards, need to look for a x-over cable, although I
did test an earlier version of this patch.  Will test in a couple days.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NZwane Mwaikambo <zwane@holomorphy.com>
Grudgingly-acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NCoywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      54d5d424
  23. 05 9月, 2005 1 次提交
  25. 25 8月, 2005 1 次提交
  27. 29 7月, 2005 1 次提交
  29. 12 7月, 2005 1 次提交
    • S
      [NET]: add a top-level Networking menu to *config · d5950b43
      由 Sam Ravnborg 提交于 
      Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d5950b43
  31. 26 6月, 2005 4 次提交
  33. 24 6月, 2005 3 次提交
  35. 01 6月, 2005 1 次提交
  37. 27 5月, 2005 1 次提交
    • A
      [PATCH] Note on ACPI build fix · 8aadff7d
      由 Alexander Nyberg 提交于 
      Even after the previous fix you can still set CONFIG_ACPI_BOOT
indirectly even without CONFIG_ACPI by choosing CONFIG_PCI and
CONFIG_PCI_MMCONFIG.

That doesn't build very well either.

This makes PCI_MMCONFIG depend on ACPI, fixing that hole.

[ I guess in theory Kconfig could follow the whole chain of dependencies
  for things that get selected, but that sounds insanely complicated, so
  we'll just fix up these things by hand.  --Linus ]
Signed-off-by: NAlexander Nyberg <alexn@telia.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      8aadff7d
  39. 17 5月, 2005 1 次提交
    • A
      [PATCH] x86_64: Add pmtimer support · 312df5f1
      由 Andi Kleen 提交于 
      There are unfortunately more and more multi processor Opteron systems which
don't have HPET timer support in the southbridge.  This covers in particular
Nvidia and VIA chipsets.  They also don't guarantee that the TSCs are
synchronized between CPUs; and especially with MP powernow the systems are
nearly unusable because the time gets very inconsistent between CPUs.

The timer code for x86-64 was originally written under the assumption that we
could fall back to the HPET timer on such systems.  But this doesn't work
there.

Another alternative is to use the ACPI PM timer as primary time source.  This
patch does that.  The kernel only uses PM timer when there is no other choice
because it has some disadvantages.

Ported over from i386.  It should be faster than the i386 version because I
dropped the "read three times" workaround, but is still considerable slower
than HPET and also does not work together with vsyscalls which have to be
disabled.

Cc: <mark.langsdorf@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      312df5f1
  41. 04 5月, 2005 1 次提交
    • A
      [PATCH] ISA DMA Kconfig fixes - part 1 · 5cae841b
      由 Al Viro 提交于 
      A bunch of drivers use ISA DMA helpers or their equivalents for
platforms that have ISA with different DMA controller (a lot of ARM
boxen).  Currently there is no way to put such dependency in Kconfig -
CONFIG_ISA is not it (e.g.  it is not set on platforms that have no ISA
slots, but have on-board devices that pretend to be ISA ones).

New symbol added - ISA_DMA_API.  Set when we have functional
enable_dma()/set_dma_mode()/etc.  set of helpers.  Next patches in the
series will add missing dependencies for drivers that need them.

I'm very carefully staying the hell out of the recurring flamefest on
what exactly CONFIG_ISA would mean in ideal world - added symbol has a
well-defined meaning and for now I really want to treat it as completely
independent from the mess around CONFIG_ISA.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      5cae841b
  43. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      由 Linus Torvalds 提交于 
      Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
      1da177e4