- 28 1月, 2019 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland. 2) Integer overflow in ktime handling of bcm can code, from Oliver Hartkopp. 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon Horman. 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang. 5) Use after free in ax25, from Eric Dumazet. 6) Several fixes to the SSN support in SCTP, from Xin Long. 7) Do not process frames after a NAPI reschedule in ibmveth, from Thomas Falcon. 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) qed: Revert error handling changes. cfg80211: extend range deviation for DMG cfg80211: reg: remove warn_on for a normal case mac80211: Add attribute aligned(2) to struct 'action' mac80211: don't initiate TDLS connection if station is not associated to AP nl80211: fix NLA_POLICY_NESTED() arguments ibmveth: Do not process frames after calling napi_reschedule net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP net: usb: asix: ax88772_bind return error when hw_reset fail MAINTAINERS: Update cavium networking drivers net/mlx4_core: Fix error handling when initializing CQ bufs in the driver net/mlx4_core: Add masking for a few queries on HCA caps sctp: set flow sport from saddr only when it's 0 sctp: set chunk transport correctly when it's a new asoc sctp: improve the events for sctp stream adding sctp: improve the events for sctp stream reset ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel ax25: fix possible use-after-free sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe hv_netvsc: fix typos in code comments ...
-
- 27 1月, 2019 4 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull smb3 fixes from Steve French: "A set of small smb3 fixes, some fixing various crediting issues discovered during xfstest runs, five for stable" * tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData smb3: add credits we receive from oplock/break PDUs CIFS: Fix mounts if the client is low on credits CIFS: Do not assume one credit for async responses CIFS: Fix credit calculations in compound mid callback CIFS: Fix credit calculation for encrypted reads with errors CIFS: Fix credits calculations for reads with errors CIFS: Do not reconnect TCP session in add_credits() smb3: Cleanup license mess CIFS: Fix possible hang during async MTU reads and writes cifs: fix memory leak of an allocated cifs_ntsd structure
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fixes from Alex Williamson: - cleanup licenses in new files (Thomas Gleixner) - cleanup new compiler warnings (Alexey Kardashevskiy) * tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci/nvlink2: Fix ancient gcc warnings vfio/pci: Cleanup license mess
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Six fixes, all of which appear to have user visible consequences. The DMA one is a regression fix from the merge window and of the others, four are driver specific and one specific to the target code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Use explicit access size in ufshcd_dump_regs scsi: tcmu: fix use after free scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state() scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport scsi: communicate max segment size to the DMA mapping code
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A collection of fixes for this release. This contains: - Silence sparse rightfully complaining about non-static wbt functions (Bart) - Fixes for the zoned comments/ioctl documentation (Damien) - direct-io fix that's been lingering for a while (Ernesto) - cgroup writeback fix (Tejun) - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju) - Block recursion tracking fix (Ming) - Fix debugfs command flag naming for a few flags (Jianchao)" * tag 'for-linus-20190125' of git://git.kernel.dk/linux-block: block: Fix comment typo uapi: fix ioctl documentation blk-wbt: Declare local functions static blk-mq: fix the cmd_flag_name array nvme-multipath: drop optimization for static ANA group IDs nvmet-rdma: fix null dereference under heavy load nvme-rdma: rework queue maps handling nvme-tcp: fix timeout handler nvme-rdma: fix timeout handler writeback: synchronize sync(2) against cgroup writeback membership switches block: cover another queue enter recursion via BIO_QUEUE_ENTERED direct-io: allow direct writes to empty inodes
-
- 26 1月, 2019 7 次提交
-
-
由 David S. Miller 提交于
This is new code and not bug fixes. This reverts all changes added by merge commit 8fb18be9Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: - sdhci-acpi: Fixup build dependency for PCI - sdhci-omap: Resolve Kconfig warnings on keystone - sdhci-iproc: Propagate errors from DT parsing - meson-gx: Fixup IRQ handling in release callback - meson-gx: Use signal re-sampling to fixup tuning - dw_mmc-bluefield: Fix the license information * tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc-bluefield: : Fix the license information mmc: meson-gx: enable signal re-sampling together with tuning mmc: sdhci-iproc: handle mmc_of_parse() errors during probe mmc: meson-gx: Free irq in release() callback mmc: host: Fix Kconfig warnings on keystone_defconfig mmc: sdhci-acpi: Make PCI dependency explicit
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes to resolve some reported issues, as well as a number of binderfs fixups that were found after auditing the filesystem code by Al Viro. As binderfs hasn't been in a previous release yet, it's good to get these in now before the first users show up. All of these have been in linux-next for a bit with no reported issues" * tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()' binderfs: switch from d_add() to d_instantiate() binderfs: drop lock in binderfs_binder_ctl_create binderfs: kill_litter_super() before cleanup binderfs: rework binderfs_binder_device_create() binderfs: rework binderfs_fill_super() binderfs: prevent renaming the control dentry binderfs: remove outdated comment binderfs: use __u32 for device numbers binderfs: use correct include guards in header misc: pvpanic: fix warning implicit declaration char/mwave: fix potential Spectre v1 vulnerability misc: ibmvsm: Fix potential NULL pointer dereference binderfs: fix error return code in binderfs_fill_super() mei: me: add denverton innovation engine device IDs mei: me: mark LBG devices as having dma support mei: dma: silent the reject message binderfs: handle !CONFIG_IPC_NS builds binderfs: reserve devices for initial mount binderfs: rename header to binderfs.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.0-rc4. They resolve some reported bugs and add a new device id for one driver. Nothing major at all, but all good to have. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ion: Support cpu access during dma_buf_detach staging: rtl8723bs: Fix build error with Clang when inlining is disabled staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1 staging: vchiq: Fix local event signalling Staging: wilc1000: unlock on error in init_chip() staging: wilc1000: fix memory leak in wilc_add_rx_gtk staging: wilc1000: fix registration frame size
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty core and serial driver fixes for 5.0-rc4 to resolve some reported issues. Nothing major, the small serial driver fixes, a tty core fixup for a crash that was reported, and some good vt fixes from Nicolas Pitre as he seems to be auditing that chunk of code a lot lately. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled tty: Handle problem if line discipline does not have receive_buf vgacon: unconfuse vc_origin when using soft scrollback vt: invoke notifier on screen size change vt: always call notifier with the console lock held vt: make vt_console_print() compatible with the unicode screen buffer tty/n_hdlc: fix __might_sleep warning serial: 8250: Fix serial8250 initialization crash uart: Fix crash in uart_write and uart_put_char
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 5.0-rc4. Nothing major at all, just the usual selection of USB gadget bugfixes, some new USB serial driver ids, some SPDX fixes, and some PHY driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: keyspan_usa: add proper SPDX lines for .h files USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE USB: leds: fix regression in usbport led trigger usb: chipidea: fix static checker warning for NULL pointer MAINTAINERS: email address update in MAINTAINERS entries USB: usbip: delete README file USB: serial: pl2303: add new PID to support PL2303TB usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing phy: ath79-usb: Fix the main reset name to match the DT binding phy: ath79-usb: Fix the power on error path phy: fix build breakage: add PHY_MODE_SATA phy: ti: ensure priv is not null before dereferencing it USB: serial: ftdi_sio: fix GPIO not working in autosuspend usb: gadget: Potential NULL dereference on allocation error usb: dwc3: gadget: Fix the uninitialized link_state when udc starts usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup usb: dwc3: gadget: synchronize_irq dwc irq in suspend USB: serial: simple: add Motorola Tetra TPG2200 device id
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few small fixes: * avoid trying to operate TDLS when not connection, this is not valid and led to issues * count TTL-dropped frames in mesh better * deal with new WiGig channels in regulatory code * remove a WARN_ON() that can trigger due to benign races during device/driver registration * fix nested netlink policy maxattrs (syzkaller) * fix hwsim n_limits (syzkaller) * propagate __aligned(2) to a surrounding struct * return proper error in virt_wifi error path ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 1月, 2019 28 次提交
-
-
由 Chaitanya Tata 提交于
Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: NChaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chaitanya Tata 提交于
If there are simulatenous queries of regdb, then there might be a case where multiple queries can trigger request_firmware_no_wait and can have parallel callbacks being executed asynchronously. In this scenario we might hit the WARN_ON. So remove the warn_on, as the code already handles multiple callbacks gracefully. Signed-off-by: NChaitanya Tata <chaitanya.tata@bluwireless.co.uk> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Mathieu Malaterre 提交于
During refactor in commit 9e478066 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMathieu Malaterre <malat@debian.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Balaji Pothunoori 提交于
Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: NBalaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
syzbot reported an out-of-bounds read when passing certain malformed messages into nl80211. The specific place where this happened isn't interesting, the problem is that nested policy parsing was referring to the wrong maximum attribute and thus the policy wasn't long enough. Fix this by referring to the correct attribute. Since this is really not necessary, I'll come up with a separate patch to just pass the policy instead of both, in the common case we can infer the maxattr from the size of the policy array. Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: 9bb7e0f2 ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Thomas Falcon 提交于
The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
__bpf_redirect() and act_mirred checks this boolean to determine whether to prefix an ethernet header. Signed-off-by: NMaciej Żenczykowski <maze@google.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhang Run 提交于
The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by: NZhang Run <zhang.run@zte.com.cn> Reviewed-by: NYang Wei <yang.wei9@zte.com.cn> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
Following Marvell's acquisition of Cavium, we need to update all the Cavium drivers maintainer's entries to point to our new e-mail addresses. Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAmeen Rahman <Ameen.Rahman@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux由 David S. Miller 提交于
Sasha Levin says: ==================== Hyper-V hv_netvsc commits for 5.0 Three patches from Haiyang Zhang to fix settings hash key using ethtool, and Adrian Vladu's first patch fixing a few spelling mistakes. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-5.0-20190122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-01-22 this is a pull request of 4 patches for net/master. The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong warning messages in certain use cases. The next patch is by Oliver Hartkopp for the bcm that adds sanity checks for the timer value before using it to detect potential interger overflows. The last two patches are for the flexcan driver, YueHaibing's patch fixes the the return value in the error path of the flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start(). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tariq Toukan says: ==================== mlx4_core fixes for 5.0-rc This patchset includes two fixes for the mlx4_core driver. First patch by Aya fixes inaccurate parsing of some FW fields, mistakenly including additional (mostly reserved) bits. Second patch by Jack fixes a wrong (yet harmless) error handling of calls to copy_to_user() during the CQs init stage. Series generated against net commit: 49a57857 Linux 5.0-rc3 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Procedure mlx4_init_user_cqes() handles returns by copy_to_user incorrectly. copy_to_user() returns the number of bytes not copied. Thus, a non-zero return should be treated as a -EFAULT error (as is done elsewhere in the kernel). However, mlx4_init_user_cqes() error handling simply returns the number of bytes not copied (instead of -EFAULT). Note, though, that this is a harmless bug: procedure mlx4_alloc_cq() (which is the only caller of mlx4_init_user_cqes()) treats any non-zero return as an error, but that returned error value is processed internally, and not passed further up the call stack. In addition, fixes the following sparse warning: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got void *buf Fixes: e4567897 ("{net, IB}/mlx4: Initialize CQ buffers in the driver when possible") Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aya Levin 提交于
Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a0 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb65 ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by: NAya Levin <ayal@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set flow sport from 'saddr'. However, transport->saddr is set only when transport->dst exists in sctp_transport_route(). If sctp_transport_pmtu() is called without transport->saddr set, like when transport->dst doesn't exists, the flow sport will be set to 0 from transport->saddr, which will cause a wrong route to be got. Commit 6e91b578 ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") made the issue be triggered more easily since sctp_transport_pmtu() would be called in sctp_transport_route() after that. In gerneral, fl4->fl4_sport should always be set to htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist in sctp_v4/6_get_dst(), which is the case: sctp_ootb_pkt_new() -> sctp_transport_route() For that, we can simply handle it by setting flow sport from saddr only when it's 0 in sctp_v4/6_get_dst(). Fixes: 6e91b578 ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") Reported-by: NYing Xu <yinxu@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
In the paths: sctp_sf_do_unexpected_init() -> sctp_make_init_ack() sctp_sf_do_dupcook_a/b()() -> sctp_sf_do_5_1D_ce() The new chunk 'retval' transport is set from the incoming chunk 'chunk' transport. However, 'retval' transport belong to the new asoc, which is a different one from 'chunk' transport's asoc. It will cause that the 'retval' chunk gets set with a wrong transport. Later when sending it and because of Commit b9fd6839 ("sctp: add sctp_packet_singleton"), sctp_packet_singleton() will set some fields, like vtag to 'retval' chunk from that wrong transport's asoc. This patch is to fix it by setting 'retval' transport correctly which belongs to the right asoc in sctp_make_init_ack() and sctp_sf_do_5_1D_ce(). Fixes: b9fd6839 ("sctp: add sctp_packet_singleton") Reported-by: NYing Xu <yinxu@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to improve sctp stream adding events in 2 places: 1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM and in stream allocation failure checks, as the adding has to succeed after reconf_timer stops for the in stream adding request retransmission. 3. In sctp_process_strreset_addstrm_in(), no event should be sent, as no in or out stream is added here. Fixes: 50a41591 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter") Fixes: c5c4ebb3 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter") Reported-by: NYing Xu <yinxu@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to improve sctp stream reset events in 4 places: 1. In sctp_process_strreset_outreq(), the flag should always be set with SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in stream is reset here. 2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN check, as the reset has to succeed after reconf_timer stops for the in stream reset request retransmission. 3. In sctp_process_strreset_inreq(), no event should be sent, as no in or out stream is reset here. 4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or OUTGOING event should always be sent for stream reset requests, no matter it fails or succeeds to process the request. Fixes: 81054476 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: 16e1a919 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 11ae76e6 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: NYing Xu <yinxu@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wenxu 提交于
ip l add dev tun type gretap key 1000 ip a a dev tun 10.0.0.1/24 Packets with tun-id 1000 can be recived by tun dev. But packet can't be sent through dev tun for non-tunnel-dst With this patch: tunnel-dst can be get through lwtunnel like beflow: ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun Signed-off-by: Nwenxu <wenxu@ucloud.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://anongit.freedesktop.org/drm/drm由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Live from LCA pull, some fixes all over the place, i915: - GVT workload destruction fix msm: - A6XX opp-level fix - build fixes - hard-coded irq removal amdgpu: - overclocking fix - hybrid gfx fix sun4i: - fix TMDS clock usage" * tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm: drm/msm: avoid unused function warning drm/msm: Add __printf verification drm/msm: Fix A6XX support for opp-level drm/msm: honor GPU_READONLY flag drm/msm: drop interrupt-names drm/msm/gpu: Remove hardcoded interrupt name drm/msm/gpu: fix building without debugfs drm/i915/execlists: Mark up priority boost on preemption drm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload drm/sun4i: hdmi: Fix usage of TMDS clock drm/amd/powerplay: OD setting fix on Vega10 drm/amdgpu: Add APTX quirk for Lenovo laptop drm/msm: Unblock writer if reader closes file
-
git://people.freedesktop.org/~robclark/linux由 Dave Airlie 提交于
A few fixes for v5.0.. the opp-level fix and removal of hard-coded irq name is partially to make things smoother in v5.1 merge window to avoid dependency on drm vs dt trees, but are otherwise sane changes. Signed-off-by: NDave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsAEHd2tGRQxRTs+A-8y_tthPs2iUgCCCEwR5vDMXab4A@mail.gmail.com
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.0-rc4: - fix priority boost - gvt: fix destroy of shadow batch and indirect ctx Signed-off-by: NDave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87k1iu1a2e.fsf@intel.com
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
- Overclock fix for vega10 - Hybrid gfx laptop fix Signed-off-by: NDave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190123231004.3111-1-alexander.deucher@amd.com
-
由 Ronnie Sahlberg 提交于
Was helpful in debug for some recent problems. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Otherwise we gradually leak credits leading to potential hung session. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Pavel Shilovsky 提交于
If the server doesn't grant us at least 3 credits during the mount we won't be able to complete it because query path info operation requires 3 credits. Use the cached file handle if possible to allow the mount to succeed. Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Pavel Shilovsky 提交于
If we don't receive a response we can't assume that the server granted one credit. Assume zero credits in such cases. Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Pavel Shilovsky 提交于
The current code doesn't do proper accounting for credits in SMB1 case: it adds one credit per response only if we get a complete response while it needs to return it unconditionally. Fix this and also include malformed responses for SMB2+ into accounting for credits because such responses have Credit Granted field, thus nothing prevents to get a proper credit value from them. Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-