Marking these controls as private seemed a good idea at one time,
but in practice it makes no sense. So drop this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The control in question is not a private control, so drop that
comment. Copy-and-paste left-over.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Changeset 7b9f31f3 ("[media] sta2x11_vip: fix s_std") removed
autodetect code, but it kept two vars unused:

drivers/media/pci/sta2x11/sta2x11_vip.c: In function 'vidioc_s_std':
drivers/media/pci/sta2x11/sta2x11_vip.c:448:6: warning: unused variable 'status' [-Wunused-variable]
  int status;
      ^
drivers/media/pci/sta2x11/sta2x11_vip.c:447:14: warning: unused variable 'oldstd' [-Wunused-variable]
  v4l2_std_id oldstd = vip->std;
              ^
Remove them.

Fixes: 7b9f31f3 ("[media] sta2x11_vip: fix s_std")
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The s_std ioctl was broken in this driver, partially due to the
changes to the adv7180 driver (this affected the handling of
V4L2_STD_ALL) and partially because the new standard was never
stored in vip->std.

The handling of V4L2_STD_ALL has been rewritten to just call querystd
and the new standard is now stored correctly.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NFederico Vaga <federico.vaga@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The adv7180 attempts to autodetect the standard. Unfortunately this
is seriously broken.

This patch removes the autodetect completely. Only the querystd op
will detect the standard. Since the design of the adv7180 requires
that you switch to a special autodetect mode you cannot call querystd
when you are streaming.

So the s_stream op has been added so we know whether we are streaming
or not, and if we are, then querystd returns EBUSY.

After testing this with a signal generator is became obvious that
a sleep is needed between changing the standard to autodetect and
reading the status. So the autodetect can never have worked well.

The s_std call now just sets the new standard without any querying.

If the driver supports the interrupt, then when it detects a standard
change it will signal that by sending the V4L2_EVENT_SOURCE_CHANGE
event.

With these changes this driver now behaves like all other video
receivers.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NFederico Vaga <federico.vaga@gmail.com>
Tested-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We print an uninitialized "actlen" variable on the error path.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Drop the 'experimental' annotations. The only remaining part of the API
that is still marked 'experimental' are the debug ioctls/structs, and
that is intentional. Only the v4l2-dbg application should use those.

All others have been around for years, so it is time to drop the
'experimental' designation.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Most of what is marked as 'experimental' has been around for years. Time
to drop that annotation.

The only remaining 'experimental' bits of the API are the debug ioctls
and structs: these should remain experimental since the only application
that should use this is v4l2-dbg.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When determining if the standard is 50 or 60 Hz it is standard
practice to test for 60 Hz instead of 50 Hz.

This doesn't matter normally, except if the user specifies both
60 and 50 Hz standards.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The test pattern generator will be used by other drivers as the virtual
media controller (vimc)
Signed-off-by: NHelen Mae Koike Fornazier <helen.koike@collabora.co.uk>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The v4l2_rect helper functions have been moved to
include/media/v4l2-rect.h. Use this new header, dropping the functions
from vivid.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This makes it easier to share this code with any driver that needs to
manipulate the v4l2_rect datastructure.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of rolling our own define, just use the new mask defines.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The v4l2_device_call_* defines filter subdevs based on the grp_id value.
But some drivers use a bitmask, so instead of filtering by grp_id == value,
you want to filter by grp_id & value.

Make variants of these defines to do this.

The 'has_op' define has been extended to have a grp_id argument as well, and
a mask variant has been added.

This extra argument required a change to go7007.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The ADV7180 supports NTSC, PAL and SECAM.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support to get the pixel aspect ratio depending on the current
standard (50 vs 60 Hz).
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support to get the standard to the adv7180 driver.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch defines region_configs[] array as const array since it
is not changed anywhere in code.
Signed-off-by: NClaudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The DV_TIMINGS_CAP documentation didn't state clearly that the pad and
reserved fields should be zeroed by the application. For subdev pad can
be other values as well.

It also mistakenly said that only drivers would have to zero the reserved
field, that's not correct.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The ENUM_DV_TIMINGS documentation did not clearly state that the pad and reserved
fields should be zeroed (pad only when used with a video device node).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The G/S_EDID documentation did not explicitly state that the reserved array
should be zeroed by the application.

Also add the missing VIDIOC_SUBDEV_G/S_EDID ioctl names to the header.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

v4l2-compliance complained about this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix this smatch error:

dib0090.c:1124 dib0090_pwm_gain_reset() error: we previously assumed 'state->rf_ramp' could be null (see line 1086)
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

These are false positives, but still easy to fix.

pvrusb2-hdw.c:3676 pvr2_send_request_ex() error: we previously assumed 'write_data' could be null (see line 3648)
pvrusb2-hdw.c:3829 pvr2_send_request_ex() error: we previously assumed 'read_data' could be null (see line 3649)
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The smatch utility got really confused about the grp % 22 code. Rewrote
it so it now understands that there really isn't a buffer overwrite.

vivid-rds-gen.c:82 vivid_rds_generate() error: buffer overflow 'rds->psname' 9 <= 43
vivid-rds-gen.c:83 vivid_rds_generate() error: buffer overflow 'rds->psname' 9 <= 42
vivid-rds-gen.c:89 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 84
vivid-rds-gen.c:90 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 85
vivid-rds-gen.c:92 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 86
vivid-rds-gen.c:93 vivid_rds_generate() error: buffer overflow 'rds->radiotext' 65 <= 87
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Set vb2_queue.gfp_flags to GFP_DMA32. Otherwise it will start to
create bounce buffers which is something you want to avoid since
those are in limited supply.

Without this patch, DMA scatter-gather may not work because
machines can ran out of buffers easily.
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The mainline tw686x driver also supports audio, that's missing here
as well.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Set vb2_queue.gfp_flags to GFP_DMA32. Otherwise it will start to
create bounce buffers which is something you want to avoid since
those are in limited supply.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

the dma_requests field is cached, but cache is not used:

drivers/staging/media/tw686x-kh/tw686x-kh-video.c: In function 'tw686x_video_irq':
drivers/staging/media/tw686x-kh/tw686x-kh-video.c:622:6: warning: variable 'requests' set but not used [-Wunused-but-set-variable]
  u32 requests;
      ^

Use the cache instead, as it seems reading it needs to be done
with spin lock taken.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This commit introduces the support for the Techwell TW686x video
capture IC. This hardware supports a few DMA modes, including
scatter-gather and frame (contiguous).

This commit makes little use of the DMA engine and instead has
a memcpy based implementation. DMA frame and scatter-gather modes
support may be added in the future.

Currently supported chips:
- TW6864 (4 video channels),
- TW6865 (4 video channels, not tested, second generation chip),
- TW6868 (8 video channels but only 4 first channels using
           built-in video decoder are supported, not tested),
- TW6869 (8 video channels, second generation chip).

[mchehab@osg.samsung.com: make checkpatch happy by using "unsigned int"
  instead  of just "unsigned"]
Cc: Krzysztof Halasa <khalasa@piap.pl>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

A driver for Intersil/Techwell TW686x-based PCIe frame grabbers.

[hans.verkuil@cisco.com: renamed staging tw686x to tw686x-kh to prevent naming conflicts]
[hans.verkuil@cisco.com: don't build tw686x-kh if tw686x is already selected to prevent conflicts]
[mchehab@osg.samsung.com: use "unsigned int" instead of just "unsigned"  and add some whitespaces to make checkpatch happier]
Signed-off-by: NKrzysztof Halasa <khalasa@piap.pl>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Those callbacks are called with the media_device.graph_mutex held.

Add a note about that, as the code called by those notifiers should
not be touching in the mutex.
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Right now, the lock schema for media_device struct is messy,
since sometimes, it is protected via a spin lock, while, for
media graph traversal, it is protected by a mutex.

Solve this conflict by always using a mutex.

As a side effect, this prevents a bug when the media notifiers
is called at atomic context, while running the notifier callback:

 BUG: sleeping function called from invalid context at mm/slub.c:1289
 in_atomic(): 1, irqs_disabled(): 0, pid: 3479, name: modprobe
 4 locks held by modprobe/3479:
 #0:  (&dev->mutex){......}, at: [<ffffffff81ce8933>] __driver_attach+0xa3/0x160
 #1:  (&dev->mutex){......}, at: [<ffffffff81ce8941>] __driver_attach+0xb1/0x160
 #2:  (register_mutex#5){+.+.+.}, at: [<ffffffffa10596c7>] usb_audio_probe+0x257/0x1c90 [snd_usb_audio]
 #3:  (&(&mdev->lock)->rlock){+.+.+.}, at: [<ffffffffa0e6051b>] media_device_register_entity+0x1cb/0x700 [media]
 CPU: 2 PID: 3479 Comm: modprobe Not tainted 4.5.0-rc3+ #49
 Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
 0000000000000000 ffff8803b3f6f288 ffffffff81933901 ffff8803c4bae000
 ffff8803c4bae5c8 ffff8803b3f6f2b0 ffffffff811c6af5 ffff8803c4bae000
 ffffffff8285d7f6 0000000000000509 ffff8803b3f6f2f0 ffffffff811c6ce5
 Call Trace:
 [<ffffffff81933901>] dump_stack+0x85/0xc4
 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0
 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0
 [<ffffffff8155aade>] kmem_cache_alloc_trace+0x20e/0x300
 [<ffffffffa0e66e3d>] ? media_add_link+0x4d/0x140 [media]
 [<ffffffffa0e66e3d>] media_add_link+0x4d/0x140 [media]
 [<ffffffffa0e69931>] media_create_pad_link+0xa1/0x600 [media]
 [<ffffffffa0fe11b3>] au0828_media_graph_notify+0x173/0x360 [au0828]
 [<ffffffffa0e68a6a>] ? media_gobj_create+0x1ba/0x480 [media]
 [<ffffffffa0e606fb>] media_device_register_entity+0x3ab/0x700 [media]
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

s32tmp in the below code may be negative, and dev->mclk_khz is an
unsigned type.

	s32tmp = 0x10000 * (tuner_frequency - c->frequency);
	s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk_khz);

This is undefined, as DIV_ROUND_CLOSEST is undefined for negative
dividends when the divisor is of unsigned type.

So, change mclk_khz to be signed (s32).
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The maximum image size supported by the WPF is 2048x2048 on Gen2 and
8190x8190 on Gen3. Update the code accordingly, and fix the maximum LIF
size for both Gen2 and Gen3.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The format is erroneously defined with an alpha channel. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the global alpha multiplier of DRM planes configurable. All the
necessary infrastructure is there, we just need to store the alpha value
passed through the DRM API.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>