This is part of an effort to clean-up the MFD subsystem.

WARNING: sizeof t should be sizeof(t)
+       memset(&t, 0, sizeof t);

WARNING: void function return statements are not generally useful
+       return;
+}

total: 0 errors, 2 warnings, 542 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

ERROR: space required after that ',' (ctx:VxO)
+                                 0, &twl6040_irq_chip,&twl6040->irq_data);
                                                      ^

ERROR: space required before that '&' (ctx:OxV)
+                                 0, &twl6040_irq_chip,&twl6040->irq_data);
                                                       ^

total: 2 errors, 0 warnings, 816 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+               const struct of_device_id *match;
+               match = of_match_node(sec_dt_match, i2c->dev.of_node);

total: 0 errors, 1 warnings, 494 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

ERROR: space required after that ',' (ctx:VxV)
+#define MSP_GPIO(bit,reg)      ((DM355EVM_MSP_ ## reg) << 3 | (bit))
                     ^

total: 1 errors, 0 warnings, 437 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: line over 80 characters
+       wm8350->irq_base = irq_alloc_descs(irq_base, 0, ARRAY_SIZE(wm8350_irqs), 0);

total: 0 errors, 1 warnings, 552 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+       unsigned long flags;
+       spin_lock_irqsave(&mcp->lock, flags);

total: 0 errors, 1 warnings, 238 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+       int ret;
+       ret = i2c_add_driver(&max8925_driver);

total: 0 errors, 1 warnings, 275 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

+WARNING: line over 80 characters
+                                      &max77686_rtc_regmap_config);

total: 0 errors, 1 warnings, 299 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

There is no need to print out-of-memory errors since this is already
done by the memory management subsystem which even calls dump_stack().
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Error checking across the driver is mostly consistent besides
a few exceptions, so change these exceptions for consistency.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When platform data is not found an -EIO (I/O error) code is returned.
This doesn't seem to be the correct error so better return -EINVAL
(Invalid argument) which is what most drivers do in this case.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The function max77802_i2c_parse_dt_pdata() should only be called
if there isn't already platform data for the device.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When the CONFIG_OF option was not enabled, a dummy function
max77686_i2c_parse_dt_pdata() was defined since this is called
unconditionally on probe(). Just always define the real function
and conditionally call it if CONFIG_OF is enabled instead.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The driver doesn't have PM operations defined so add a suspend
and resume function handlers to allow the PMIC IRQ to wakeup
the system when it is put into a sleep state.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

By using the generic IRQ support in the Register map API, it
is possible to get rid max77686-irq.c and simplify the code.
Suggested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The Allwinner A23 SoC has a PRCM unit like the previous A31 SoC.
The differences are the AR100 clock can no longer be modified,
the APB0 clock has different divisors, and some clock gates are
gone.

This patch adds a compatible with a modified subdevice list for
the A23.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When checkpatch is run on ab8500-debugfs.c it screamed blue murder!

This patch fixes up all of the errors/warnings reported:

WARNING: line over 80 characters
+		err = seq_printf(s, "  [0x%02X/0x%02X]: 0x%02X\n",

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+		printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n",

WARNING: Prefer seq_puts to seq_printf
+	seq_printf(s, AB8500_NAME_STRING " register values:\n");

WARNING: Prefer seq_puts to seq_printf
+	seq_printf(s, AB8500_NAME_STRING " register values:\n");

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+	printk(KERN_INFO"ab8500 register values:\n");

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+		printk(KERN_INFO" bank 0x%02X:\n", i);

WARNING: externs should be avoided in .c files
+extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);

WARNING: quoted string split across lines
+	pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" "
+		"for crash analyze.\n");

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+		printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__);

WARNING: Prefer seq_puts to seq_printf
+	seq_printf(s, "name: number:  number of: wake:\n");

WARNING: line over 80 characters
+	return single_open(file, ab8500_print_modem_registers, inode->i_private);

WARNING: line over 80 characters
+	return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private);

WARNING: line over 80 characters
+	return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private);

WARNING: line over 80 characters
+	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,

WARNING: line over 80 characters
+static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p)

WARNING: line over 80 characters
+static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = {

WARNING: line over 80 characters
+		vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h);

WARNING: quoted string split across lines
+		dev_err(dev, "debugfs error input: "
+			"should be egal to 1, 4, 8 or 16\n");

WARNING: Missing a blank line after declarations
+	char *s = b;
+	if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) {

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+			loc.mask = simple_strtoul(b, &b, 0);

WARNING: simple_strtol is obsolete, use kstrtol instead
+			loc.shift = simple_strtol(b, &b, 0);

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+	loc.bank = simple_strtoul(b, &b, 0);

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+	loc.addr = simple_strtoul(b, &b, 0);

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+		val = simple_strtoul(b, &b, 0);

WARNING: quoted string split across lines
+	pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d"
+			"value=0x%X\n", (write) ? "write" : "read",

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+		printk(KERN_ERR "sysfs_create_file failed %d\n", err);

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+		printk(KERN_ERR "request_threaded_irq failed %d, %lu\n",

ERROR: code indent should use tabs where possible
+                       err, user_val);$

WARNING: please, no spaces at the start of a line
+                       err, user_val);$

WARNING: Missing a blank line after declarations
+	struct resource *res;
+	debug_bank = AB8500_MISC;

ERROR: space required after that ',' (ctx:VxV)
+		sizeof(*dev_attr)*num_irqs,GFP_KERNEL);
 		                          ^

WARNING: return of an errno should typically be -ve (return -ENXIO)
+		return ENXIO;

WARNING: line over 80 characters
+	file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+		file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+			ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops);

WARNING: line over 80 characters
+		file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+		file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+			ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops);

total: 2 errors, 44 warnings, 3230 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add details of following properties which are used on driver but
not documented on DT binding document.
- ams,enable-internal-int-pullup
- ams,enable-internal-i2c-pullup
Reported-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

We know how many bytes the EC should be sending us (which is also the
number of bytes transferred) and also how many bytes the EC actually
wanted to send to us.  When computing the checksum and copying back
data let's make sure we take the lesser of the two of those.  We'll
also complain if the EC tried to send us too many bytes.  The EC
sending us too few bytes is legit for when we send the EC an invalid
command.

This is based on similar code in cros_ec_spi.
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Soothes the following checkpatch warnings:

    WARNING: line over 80 characters
    #151: FILE: drivers/mfd/ab8500-core.c:151:
    +	0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23,

    ERROR: spaces required around that '=' (ctx:VxW)
    #325: FILE: drivers/mfd/ab8500-core.c:325:
    +	ret= mask_and_set_register_interruptible(ab8500, bank, reg,
     	   ^

    WARNING: line over 80 characters
    #418: FILE: drivers/mfd/ab8500-core.c:418:
    +		else if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R)

    WARNING: line over 80 characters
    #420: FILE: drivers/mfd/ab8500-core.c:420:
    +		else if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R)

    ERROR: spaces required around that '==' (ctx:VxV)
    #454: FILE: drivers/mfd/ab8500-core.c:454:
    +	if ((i==3) && (*offset >= 24))
     	      ^

    ERROR: code indent should use tabs where possible
    #576: FILE: drivers/mfd/ab8500-core.c:576:
    +        .map    = ab8500_irq_map,$

    WARNING: please, no spaces at the start of a line
    #576: FILE: drivers/mfd/ab8500-core.c:576:
    +        .map    = ab8500_irq_map,$

    ERROR: code indent should use tabs where possible
    #577: FILE: drivers/mfd/ab8500-core.c:577:
    +        .xlate  = irq_domain_xlate_twocell,$

    WARNING: please, no spaces at the start of a line
    #577: FILE: drivers/mfd/ab8500-core.c:577:
    +        .xlate  = irq_domain_xlate_twocell,$

    WARNING: char * array declaration might be better as static const
    #1554: FILE: drivers/mfd/ab8500-core.c:1554:
    +	static char *switch_off_status[] = {

    WARNING: char * array declaration might be better as static const
    #1563: FILE: drivers/mfd/ab8500-core.c:1563:
    +	static char *turn_on_status[] = {

    WARNING: sizeof *ab8500 should be sizeof(*ab8500)
    #1582: FILE: drivers/mfd/ab8500-core.c:1582:
    +	ab8500 = devm_kzalloc(&pdev->dev, sizeof *ab8500, GFP_KERNEL);

    ERROR: space required after that close brace '}'
    #1639: FILE: drivers/mfd/ab8500-core.c:1639:
    +	}/* Configure AB8500 or AB9540 IRQ */

    WARNING: line over 80 characters
    #1652: FILE: drivers/mfd/ab8500-core.c:1652:
    +	ab8500->oldmask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL);

    WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(...  to printk(KERN_CONT ...
    #1677: FILE: drivers/mfd/ab8500-core.c:1677:
    +				printk(KERN_CONT " \"%s\"",

    WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(...  to printk(KERN_CONT ...
    #1682: FILE: drivers/mfd/ab8500-core.c:1682:
    +		printk(KERN_CONT "\n");

    WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(...  to printk(KERN_CONT ...
    #1684: FILE: drivers/mfd/ab8500-core.c:1684:
    +		printk(KERN_CONT " None\n");

    WARNING: printk() should include KERN_ facility level
    #1695: FILE: drivers/mfd/ab8500-core.c:1695:
    +				printk("\"%s\" ", turn_on_status[i]);

    WARNING: printk() should include KERN_ facility level
    #1700: FILE: drivers/mfd/ab8500-core.c:1700:
    +		printk("None\n");

    total: 5 errors, 14 warnings, 1869 lines checked
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Corrects the following checkpatch gripes:

    WARNING: quoted string split across lines
    #95: FILE: drivers/mfd/ab3100-core.c:95:
    +			"write error (write register) "
    +			"%d bytes transferred (expected 2)\n",

    WARNING: quoted string split across lines
    #139: FILE: drivers/mfd/ab3100-core.c:139:
    +			"write error (write test register) "
    +			"%d bytes transferred (expected 2)\n",

    WARNING: quoted string split across lines
    #175: FILE: drivers/mfd/ab3100-core.c:175:
    +			"write error (send register address) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #193: FILE: drivers/mfd/ab3100-core.c:193:
    +			"write error (read register) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #241: FILE: drivers/mfd/ab3100-core.c:241:
    +			"write error (send first register address) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #256: FILE: drivers/mfd/ab3100-core.c:256:
    +			"write error (read register page) "
    +			"%d bytes transferred (expected %d)\n",

    WARNING: quoted string split across lines
    #299: FILE: drivers/mfd/ab3100-core.c:299:
    +			"write error (maskset send address) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #314: FILE: drivers/mfd/ab3100-core.c:314:
    +			"write error (maskset read register) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #334: FILE: drivers/mfd/ab3100-core.c:334:
    +			"write error (write register) "
    +			"%d bytes transferred (expected 2)\n",

    WARNING: please, no spaces at the start of a line
    #374: FILE: drivers/mfd/ab3100-core.c:374:
    +  return blocking_notifier_chain_unregister(&ab3100->event_subscribers,$

    WARNING: Prefer seq_puts to seq_printf
    #458: FILE: drivers/mfd/ab3100-core.c:458:
    +	seq_printf(s, "AB3100 registers:\n");

    WARNING: quoted string split across lines
    #564: FILE: drivers/mfd/ab3100-core.c:564:
    +			 "debug write reg[0x%02x] with 0x%02x, "
    +			 "after readback: 0x%02x\n",

    WARNING: quoted string split across lines
    #723: FILE: drivers/mfd/ab3100-core.c:723:
    +			 "AB3100 P1E variant detected, "
    +			 "forcing chip to 32KHz\n");

    WARNING: quoted string split across lines
    #882: FILE: drivers/mfd/ab3100-core.c:882:
    +			"could not communicate with the AB3100 analog "
    +			"baseband chip\n");

    WARNING: quoted string split across lines
    #906: FILE: drivers/mfd/ab3100-core.c:906:
    +		dev_err(&client->dev, "accepting it anyway. Please update "
    +			"the driver.\n");

    total: 0 errors, 15 warnings, 999 lines checked
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Soothes checkpatch warning:

    WARNING: simple_strtoul is obsolete, use kstrtoul instead
    #306: FILE: drivers/mfd/aat2870-core.c:306:
    +	addr = simple_strtoul(start, &start, 16);
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fixes checkpatch warning:

    WARNING: please, no space before tabs
    #5: FILE: drivers/mfd/88pm860x-i2c.c:5:
    + * ^IHaojian Zhuang <haojian.zhuang@marvell.com>$
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fixes the following checkpatch warnings:

    WARNING: please, no space before tabs
    #5: FILE: drivers/mfd/88pm860x-core.c:5:
    + * ^IHaojian Zhuang <haojian.zhuang@marvell.com>$

    WARNING: line over 80 characters
    #143: FILE: drivers/mfd/88pm860x-core.c:143:
    +	{PM8607_IRQ_AUDIO_SHORT, PM8607_IRQ_AUDIO_SHORT, "audio-short", IORESOURCE_IRQ,},

    WARNING: line over 80 characters
    #153: FILE: drivers/mfd/88pm860x-core.c:153:
    +	{PM8607_IRQ_CHG_DONE,  PM8607_IRQ_CHG_DONE,  "charging done",       IORESOURCE_IRQ,},

    WARNING: line over 80 characters
    #154: FILE: drivers/mfd/88pm860x-core.c:154:
    +	{PM8607_IRQ_CHG_FAIL,  PM8607_IRQ_CHG_FAIL,  "charging timeout",    IORESOURCE_IRQ,},

    WARNING: line over 80 characters
    #155: FILE: drivers/mfd/88pm860x-core.c:155:
    +	{PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault",	    IORESOURCE_IRQ,},

    WARNING: line over 80 characters
    #156: FILE: drivers/mfd/88pm860x-core.c:156:
    +	{PM8607_IRQ_GPADC1,    PM8607_IRQ_GPADC1,    "battery temperature", IORESOURCE_IRQ,},

    WARNING: Avoid unnecessary line continuations
    #571: FILE: drivers/mfd/88pm860x-core.c:571:
    +	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \

    WARNING: line over 80 characters
    #634: FILE: drivers/mfd/88pm860x-core.c:634:
    +	ret = request_threaded_irq(chip->core_irq, NULL, pm860x_irq, flags | IRQF_ONESHOT,

    WARNING: Unnecessary parentheses - maybe == should be = ?
    #874: FILE: drivers/mfd/88pm860x-core.c:874:
    +	if ((pdata == NULL))

    WARNING: quoted string split across lines
    #1001: FILE: drivers/mfd/88pm860x-core.c:1001:
    +		dev_err(chip->dev, "Failed to detect Marvell 88PM8607. "
    +			"Chip ID: %02x\n", ret);

    WARNING: quoted string split across lines
    #1124: FILE: drivers/mfd/88pm860x-core.c:1124:
    +		dev_err(dev, "Not found \"marvell,88pm860x-slave-addr\" "
    +			"property\n");

total: 0 errors, 11 warnings, 1281 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This code has been working since 2012, as limiting the time between
1ms and 3ms is unlikely to do any harm.

Soothes checkpatch warning:

  WARNING: msleep < 20ms can sleep for up to 20ms;
      see Documentation/timers/timers-howto.txt
  #161: FILE: drivers/mfd/88pm805.c:161:
  +	msleep(1);
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Extinguishes:

../drivers/mfd/tps65910.c: In function ‘tps65910_parse_dt’:
../drivers/mfd/tps65910.c:404:14:
	warning: cast from pointer to integer of different size
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Extinguishes:

../drivers/mfd/arizona-core.c: In function ‘arizona_of_get_type’:
../drivers/mfd/arizona-core.c:505:10:
	warning: cast from pointer to integer of different size
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Extinguishes:

../drivers/mfd/stmpe-i2c.c: In function ‘stmpe_i2c_probe’:
../drivers/mfd/stmpe-i2c.c:88:13:
	warning: cast from pointer to integer of different size
	partnum = (int)of_id->data;
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If CONIFG_ACPI is not enabled we receive the following warning:

drivers/mfd/intel_soc_pmic_core.c:144:30:
	warning: ‘intel_soc_pmic_acpi_match’ defined but not used

This patch rids it.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Noticed during a coding review, if we reorganised the checking a
little, we can rid the code of a pointless 'else'.  Whilst looking
for this particular code hunk I noticed another pointless 'else',
which I've subsequently fixed in this patch.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Save a line of code (albeit, it's replaced by a blank line, but
still), as the else is superfluous.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Unsigned variable can't be negative so it is unnecessary to test it

This was found using a static code analysis program called cppcheck
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fix checkpatch warning:
WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we receive EC interrupts after the cros_ec driver has probed, but
before the cros_ec_keyb driver has probed, the cros_ec IRQ handler
will not run the cros_ec_keyb notifier and the EC will leave the IRQ
line asserted.  The cros_ec IRQ handler then returns IRQ_HANDLED and
the resulting flood of interrupts causes the machine to hang.

Since the EC interrupt is currently only used for the keyboard, move
the setup and handling of the EC interrupt to the cros_ec_keyb driver.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When communicating with the EC, the cmd_xfer() function should return the
number of bytes it received from the EC, or negative on error.
Signed-off-by: NBill Richardson <wfrichar@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Just because the host was able to talk to the EC doesn't mean that the EC
was happy with what it was told. Errors in communincation are not the same
as error messages from the EC itself.

This change lets the EC report its errors separately.

[dianders: Added common function to cros_ec.c]
Signed-off-by: NBill Richardson <wfrichar@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Remove the three wrapper functions that talk to the EC without passing all
the desired arguments and just use the underlying communication function
that passes everything in a struct intead.

This is internal code refactoring only. Nothing should change.
Signed-off-by: NBill Richardson <wfrichar@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

struct cros_ec_device has a superfluous "name" field. We can get all the
debugging info we need from the existing ec_name and phys_name fields, so
let's take out the extra field.

The printout also has sufficient info in it without explicitly adding
the transport.  Before this change:
  cros-ec-spi spi2.0: Chrome EC (SPI)

After this change:
  cros-ec-spi spi2.0: Chrome EC device registered
Signed-off-by: NBill Richardson <wfrichar@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>