Noticed by Al Viro <viro@parcelfarce.linux.theplanet.co.uk> - SMP on x86_64 is
fundamentally broken due to UML's reuse of the host arch's percpu stuff.  This
is OK on x86, but the x86_64 pda stuff just won't work for UML.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove an unneeded reference to libc.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Build cleanups
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This cleans up the error path in ubd_open, causing it now to call ubd_close
appropriately when something fails.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a macro typo which could break if the macro is passed arguments with
side-effects.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The copy_user stuff in the signal frame code was broke.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid chomping low bits of address for functions doing it by themselves,
fix whitespace, add a correctness checking.

I did this for remap-file-pages protection support, it was useful on its
own too.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Normally, activate_mm() is called from exec(), and thus it used to be a
no-op because we use a completely new "MM context" on the host (for
instance, a new process), and so we didn't need to flush any "TLB entries"
(which for us are the set of memory mappings for the host process from the
virtual "RAM" file).

Kernel threads, instead, are usually handled in a different way.  So, when
for AIO we call use_mm(), things used to break and so Benjamin implemented
activate_mm().  However, that is only needed for AIO, and could slow down
exec() inside UML, so be smart: detect being called for AIO (via
PF_BORROWED_MM) and do the full flush only in that situation.

Comment also the caller so that people won't go breaking UML without
noticing.  I also rely on the caller's locks for testing current->flags.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If a SIGWINCH comes in, while winch_thread() isn't waiting in wait(),
winch_thread could miss signals.  It isn't very probable, that anyone will
see this causing trouble, as it would need a very special timing, that a
missed SIGWINCH results in a wrong window size.

So, this is a minor problem.  But why not fix, as it can be done so easy?
Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Apparently, GDB gets confused when we do an execvp() on ourselves.

Since it's simply done to allocate further space for command line arguments
(which we'll use to allow gathering the startup command line for guest
processes through the host), allow the user to disable that to get a
debuggable UML binary.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a follow-up to "UML Support - Ptrace: adds the host SYSEMU support, for
UML and general usage" (i.e.  uml-support-* in current mm).

Avoid unconditionally jumping to work_pending and code copying, just reuse
the already existing resume_userspace path.

One interesting note, from Charles P.  Wright, suggested that the API is
improvable with no downsides for UML (except that it will have to support
yet another host API, since dropping support for the current API, for UML,
is not reasonable from users' point of view).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Charles P. Wright <cwright@cs.sunysb.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

      Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

This is simply an adjustment for "Ptrace - i386: fix Syscall Audit interaction
with singlestep" to work on top of SYSEMU patches, too.  On this patch, I have
some doubts: I wonder why we need to alter that way ptrace_disable().

I left the patch this way because it has been extensively tested, but I don't
understand the reason.

The current PTRACE_DETACH handling simply clears child->ptrace; actually this
is not enough because entry.S just looks at the thread_flags; actually,
do_syscall_trace checks current->ptrace but I don't think depending on that is
good, at least for performance, so I think the clearing is done elsewhere.
For instance, on PTRACE_CONT it's done, but doing PTRACE_DETACH without
PTRACE_CONT is possible (and happens when gdb crashes and one kills it
manually).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Roland McGrath <roland@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch implements the new ptrace option PTRACE_SYSEMU_SINGLESTEP, which
can be used by UML to singlestep a process: it will receive SINGLESTEP
interceptions for normal instructions and syscalls, but syscall execution will
be skipped just like with PTRACE_SYSEMU.
Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With this patch, we change the way we handle switching from PTRACE_SYSEMU to
PTRACE_{SINGLESTEP,SYSCALL}, to free TIF_SYSCALL_EMU from double use as a
preparation for PTRACE_SYSEMU_SINGLESTEP extension, without changing the
behavior of the host kernel.
Signed-off-by: NBodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

      Jeff Dike <jdike@addtoit.com>,
      Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>,
      Bodo Stroesser <bstroesser@fujitsu-siemens.com>

Adds a new ptrace(2) mode, called PTRACE_SYSEMU, resembling PTRACE_SYSCALL
except that the kernel does not execute the requested syscall; this is useful
to improve performance for virtual environments, like UML, which want to run
the syscall on their own.

In fact, using PTRACE_SYSCALL means stopping child execution twice, on entry
and on exit, and each time you also have two context switches; with SYSEMU you
avoid the 2nd stop and so save two context switches per syscall.

Also, some architectures don't have support in the host for changing the
syscall number via ptrace(), which is currently needed to skip syscall
execution (UML turns any syscall into getpid() to avoid it being executed on
the host).  Fixing that is hard, while SYSEMU is easier to implement.

* This version of the patch includes some suggestions of Jeff Dike to avoid
  adding any instructions to the syscall fast path, plus some other little
  changes, by myself, to make it work even when the syscall is executed with
  SYSENTER (but I'm unsure about them). It has been widely tested for quite a
  lot of time.

* Various fixed were included to handle the various switches between
  various states, i.e. when for instance a syscall entry is traced with one of
  PT_SYSCALL / _SYSEMU / _SINGLESTEP and another one is used on exit.
  Basically, this is done by remembering which one of them was used even after
  the call to ptrace_notify().

* We're combining TIF_SYSCALL_EMU with TIF_SYSCALL_TRACE or TIF_SINGLESTEP
  to make do_syscall_trace() notice that the current syscall was started with
  SYSEMU on entry, so that no notification ought to be done in the exit path;
  this is a bit of a hack, so this problem is solved in another way in next
  patches.

* Also, the effects of the patch:
"Ptrace - i386: fix Syscall Audit interaction with singlestep"
are cancelled; they are restored back in the last patch of this series.

Detailed descriptions of the patches doing this kind of processing follow (but
I've already summed everything up).

* Fix behaviour when changing interception kind #1.

  In do_syscall_trace(), we check the status of the TIF_SYSCALL_EMU flag
  only after doing the debugger notification; but the debugger might have
  changed the status of this flag because he continued execution with
  PTRACE_SYSCALL, so this is wrong.  This patch fixes it by saving the flag
  status before calling ptrace_notify().

* Fix behaviour when changing interception kind #2:
  avoid intercepting syscall on return when using SYSCALL again.

  A guest process switching from using PTRACE_SYSEMU to PTRACE_SYSCALL
  crashes.

  The problem is in arch/i386/kernel/entry.S.  The current SYSEMU patch
  inhibits the syscall-handler to be called, but does not prevent
  do_syscall_trace() to be called after this for syscall completion
  interception.

  The appended patch fixes this.  It reuses the flag TIF_SYSCALL_EMU to
  remember "we come from PTRACE_SYSEMU and now are in PTRACE_SYSCALL", since
  the flag is unused in the depicted situation.

* Fix behaviour when changing interception kind #3:
  avoid intercepting syscall on return when using SINGLESTEP.

  When testing 2.6.9 and the skas3.v6 patch, with my latest patch and had
  problems with singlestepping on UML in SKAS with SYSEMU.  It looped
  receiving SIGTRAPs without moving forward.  EIP of the traced process was
  the same for all SIGTRAPs.

What's missing is to handle switching from PTRACE_SYSCALL_EMU to
PTRACE_SINGLESTEP in a way very similar to what is done for the change from
PTRACE_SYSCALL_EMU to PTRACE_SYSCALL_TRACE.

I.e., after calling ptrace(PTRACE_SYSEMU), on the return path, the debugger is
notified and then wake ups the process; the syscall is executed (or skipped,
when do_syscall_trace() returns 0, i.e.  when using PTRACE_SYSEMU), and
do_syscall_trace() is called again.  Since we are on the return path of a
SYSEMU'd syscall, if the wake up is performed through ptrace(PTRACE_SYSCALL),
we must still avoid notifying the parent of the syscall exit.  Now, this
behaviour is extended even to resuming with PTRACE_SINGLESTEP.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

      Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

Avoid giving two traps for singlestep instead of one, when syscall auditing is
enabled.

In fact no singlestep trap is sent on syscall entry, only on syscall exit, as
can be seen in entry.S:

# Note that in this mask _TIF_SINGLESTEP is not tested !!! <<<<<<<<<<<<<<
        testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
        jnz syscall_trace_entry
	...
syscall_trace_entry:
	...
	call do_syscall_trace

But auditing a SINGLESTEP'ed process causes do_syscall_trace to be called, so
the tracer will get one more trap on the syscall entry path, which it
shouldn't.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Roland McGrath <roland@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To the extent that sub-Kconfig files exist elsewhere in the tree, they are
named Kconfig.foo, rather than the Kconfig_foo that UML has.  This patch
brings the names in line with the rest of the tree.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This eliminates the segfault info ring buffer, which added a system call to
each page fault, and which hadn't been useful for debugging in ages.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts arch/cris/Kconfig.debug to using lib/Kconfig.debug.

This should fix a compile error in 2.6.13-rc4 caused by a missing
CONFIG_LOG_BUF_SHIFT definition.

While I was editing this file, I also converted some spaces to tabs.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the builtin functions for memset/memclr/memcpy, special optimizations for
page operations have dedicated functions now.  Uninline memmove/memchr and
move all functions into a single file and clean it up a little.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move a few cache functions into its own file and fix flush_icache_range() so
it can handle both kernel and user addresses correctly (assuming context is
set correctly).

Turn copy_to_user_page/copy_from_user_page into inline functions and add a
missing cache flush.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- create helper function singlestep_disable()
- move variable definitions to the top of the function
- use "out_eio" label as common error destination
- don't clear failure value for PTRACE_SETREGS/PTRACE_GETREGS
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reformats and properly indents sys_ptrace (only whitespace changes).
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The timers lack .suspend/.resume methods.  Because of this, jiffies got a
big compensation after a S3 resume.  And then softlockup watchdog reports
an oops.  This occured with HPET enabled, but it's also possible for other
timers.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean code up a bit, and only show suspend to disk as available when
it is configured in.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If process freezing fails, some processes are frozen, and rest are left in
"were asked to be frozen" state.  Thats wrong, we should leave it in some
consistent state.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Drop printing during normal boot (when no image exists in swap), print
message when drivers fail, fix error paths and consolidate near-identical
functions in disk.c (and functions with just one statement).
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is trying to protect swsusp_resume_device and software_resume() from two
users banging it from userspace at the same time.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch contains a mini howto for using dm-crypt together with
swsusp.
Signed-off-by: NAndreas Steinmetz <ast@domdv.de>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The function calc_nr uses an iterative algorithm to calculate the number of
pages needed for the image and the pagedir.  Exactly the same result can be
obtained with a one-line expression.

Note that this was even proved correct ;-).
Signed-off-by: NMichal Schmidt <xschmi00@stud.feec.vutbr.cz>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Stop the disks from spinning down and up on suspend.
Signed-off-by: NMichal Schmidt <xschmi00@stud.feec.vutbr.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch protects from leaking sensitive data after resume from suspend.
During suspend a temporary key is created and this key is used to encrypt the
data written to disk.  When, during resume, the data was read back into memory
the temporary key is destroyed which simply means that all data written to
disk during suspend are then inaccessible so they can't be stolen lateron.

Think of the following: you suspend while an application is running that keeps
sensitive data in memory.  The application itself prevents the data from being
swapped out.  Suspend, however, must write these data to swap to be able to
resume lateron.  Without suspend encryption your sensitive data are then
stored in plaintext on disk.  This means that after resume your sensitive data
are accessible to all applications having direct access to the swap device
which was used for suspend.  If you don't need swap after resume these data
can remain on disk virtually forever.  Thus it can happen that your system
gets broken in weeks later and sensitive data which you thought were encrypted
and protected are retrieved and stolen from the swap device.
Signed-off-by: NAndreas Steinmetz <ast@domdv.de>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This should bits from -mm tree that are affected by pm_message_t
conversion.  [I'm not 100% sure I got all of them, but I certainly got all
the errors on make allyesconfig build, and most of warnings, too.  I'll go
through the buildlog tommorow and fix any remaining bits].
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAlexander Nyberg <alexn@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix remaining bits of u32 vs.  pm_message confusion.  Should not break
anything.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update suspend documentation.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reset the ISA DMA controller into a known state after a suspend.  Primary
concern was reenabling the cascading DMA channel (4).
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reset the ISA DMA controller into a known state after a suspend.  Primary
concern was reenabling the cascading DMA channel (4).
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This should make refrigerator sleep properly, not busywait after the first
schedule() returns.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves the common code in x86 and x86-64's semaphore.c into a
single file in lib/semaphore-sleepers.c.  The arch specific asm stubs are
left in the arch tree (in semaphore.c for i386 and in the asm for x86-64).
There should be no changes in code/functionality with this patch.
Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>