Add support for MIPI DBI compatible controllers.
Interface type C option 1 and 3 are supported (SPI).
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NThierry Reding <treding@nvidia.com>

Add common functionality needed by many tinydrm drivers.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NThierry Reding <treding@nvidia.com>

tinydrm provides helpers for very simple displays that can use
CMA backed framebuffers and need flushing on changes.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NThierry Reding <treding@nvidia.com>

This reverts commit 1592364d.

This apparantly causes some regressions so pull it out for now.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'omapdrm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

omapdrm fixes for v4.11

Fix regressions:
- Planes might have been left enabled
- Scaling checks did not use the new config

Also limit downscaling decimation to prevent HW underflows.

* tag 'omapdrm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  drm/omapdrm: dispc: Refuse x-decimation above 4 for all but 8-bit formats
  drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  Revert "drm: omapdrm: Let the DRM core skip plane commit on inactive CRTCs"

Fixes for 4.11. Highlights:
- fix >2 displays on asics with 3 or 5 crtcs
- fix SI headless asics
- powerplay fixes for new polaris variants
- misc fixes

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: fix warning on older gcc releases
  drm/ttm: make TTM_MAX_BO_PRIORITY unsigned
  drm/amd/amdgpu: Fix flow control in uvd_v4_2_stop()
  drm/amd/powerplay: add didt config table for polaris kicker
  drm/amd/powerplay: modify VddcPhase value for polaris kicker
  drm/amd/powerplay: add kicker flag into smumgr
  drm/amdgpu: Initialize pipe priority order on graphic initialization
  drm/amdgpu: read hw register to check pg status.
  drm/amdgpu: Add to initialization of mmVCE_VCPU_CNTL register
  drm/amdgpu/pm: check for headless before calling compute_clocks
  drm/amdgpu: use amdgpu_gem_va_check() in amdgpu_gem_va_update_vm()
  drm/amdgpu: add more cases to DCE11 possible crtc mask setup

gcc-4.8 warns about '{0}' being used an an initializer for nested structures:

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_ring_emit_ce_meta_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:7263:2: warning: missing braces around initializer [-Wmissing-braces]
  } ce_payload = {0};
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_ring_emit_de_meta_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:7290:2: warning: missing braces around initializer [-Wmissing-braces]
  } de_payload = {0};

Using an empty {} initializer however has the same effect and works on all versions.

Fixes: acad2b2a ("drm/amdgpu:implement CE/DE meta-init routines")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix a warning about different types in min() macro in amdgpu:

In file included from ./include/linux/list.h:8:0,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:32:
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function ‘amdgpu_bo_create_restricted’:
./include/linux/kernel.h:739:16: warning: comparison of distinct pointer types lacks a cast
  (void) (&min1 == &min2);   \
                ^
./include/linux/kernel.h:742:2: note: in expansion of macro ‘__min’
  __min(typeof(x), typeof(y),   \
  ^~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:434:21: note: in expansion of macro ‘min’
  bo->tbo.priority = min(bo->tbo.priority, TTM_MAX_BO_PRIORITY - 1);
                     ^~~
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Break out of outer loop properly.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Let's disable all scaling that requires horizontal decimation with
higher factor than 4, until we have better estimates of what we can
and can not do. However, NV12 color format appears to work Ok with
all decimation factors.

When decimating horizontally by more that 4 the dss is not able to
fetch the data in burst mode. When this happens it is hard to tell if
there enough bandwidth. Despite what theory says this appears to be
true also for 16-bit color formats.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Move drm_atomic_helper_commit_modeset_enables() call to before
drm_atomic_helper_commit_planes() call and have a
omap_atomic_wait_for_completion() call after both.

With the current dss dispc implementation we have to enable the new
modeset before we can commit planes. The dispc ovl configuration
relies on the video mode configuration been written into the HW when
the ovl configuration is calculated.

This approach is not ideal because after a mode change the plane
update is executed only after the first vblank interrupt. The dispc
implementation should be fixed so that it is able use uncommitted drm
state information.  information.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This reverts commit dadf4659.

If planes are not disabled when the they are not on any crtc anymore
they will remain active and may show as "ghosts" when the crtc they
were last on is active again.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Merge branch 'drm-rockchip-next-2017-02-16' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Use iommu for rockchip arm64 platform.

* 'drm-rockchip-next-2017-02-16' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: Use common IOMMU API to attach devices
  drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain

Merge tag 'drm-misc-next-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Fixes for the v4.11 merge window.

* tag 'drm-misc-next-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc:
  drm: Resurrect atomic rmfb code, v3
  uapi: add missing install of dma-buf.h

- remove deprecated stih416 chip functionnalities
- fix issues met around gdp panes
- fix STI driver unbind procedure
- DVI/HDMI mode is automatically detected
- allow fps statisitics resetting

* tag 'sti-drm-next-2017-02-10' of https://github.com/vinceab/linux:
  drm/sti: debug fps reset
  drm/sti: hdmi: automatically check DVI/HDMI mode
  drm/sti: unbind all components while driver cleanup
  drm/sti: do not post GDP command if no update
  drm/sti: do not set gdp pixel clock rate if mode is not set
  drm/sti: enable gdp pixel clock in atomic_update
  drm/sti: remove deprecated legacy vtg slave
  drm/sti: remove deprecated sink_term config
  drm/sti: do not check hw scaling if mode is not set
  drm/sti: Fix up crtc_state->event handling
  drm/sti: use atomic_helper for commit

This was somehow lost between v3 and the merged version in Maarten's
patch merged as:

commit f2d580b9
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Wed May 4 14:38:26 2016 +0200

    drm/core: Do not preserve framebuffer on rmfb, v4.

This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.

Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc. Since vmwgfx is
a legacy driver we can safely only disable the plane with atomic.

If this commit is rejected by the driver then we will still fall
back to the old behavior and turn off the crtc.

v2:
- Remove plane->fb assignment, done by drm_atomic_clean_old_fb.
- Add WARN_ON when atomic_remove_fb fails.
- Always call drm_atomic_state_put.
v3:
- Use drm_drv_uses_atomic_modeset
- Handle the case where the first plane-disable-only commit fails
  with -EINVAL. Some drivers do not support this, fall back to
  disabling all crtc's in this case.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com

Rockchip DRM used the arm special API, arm_iommu_*(), to attach
iommu for ARM32 SoCs. This patch convert to common iommu API
so it would support ARM64 like RK3399.

Since previous patch added support for direct IOMMU address space
management, there is no need to use DMA API anymore and this patch wires
things to use the new method.
Signed-off-by: NShunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>

The API is not suitable for subsystems consisting of multiple devices
and requires severe hacks to use it. To mitigate this, this patch
implements allocation and address space management locally by using
helpers provided by DRM framework, like other DRM drivers do, e.g.
Tegra.

This patch should not introduce any functional changes until the driver
is made to attach subdevices into an IOMMU domain with the generic IOMMU
API, which will happen in following patch. Based heavily on GEM
implementation of Tegra DRM driver.
Signed-off-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NShunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: NMark Yao <mark.yao@rock-chips.com>
Signed-off-by: Nrjan Eide <orjan.eide@arm.com>

As part of c11e391d "dma-buf: Add ioctls to
allow userspace to flush" a new uapi header file dma-buf.h was added, but an
entry was not added on Kbuild to install it. This patch resolves this omission
so that "make headers_install" installs this header.
Signed-off-by: NDenys Dmytriyenko <denys@ti.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tiago Vignatti <tiago.vignatti@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1487102447-59265-1-git-send-email-denis@denix.org

Initialized PIPE_ORDER_TS0/1/2/3 field of SPI_ARB_PRIORITY register to 2.
This set the pipe priority order to:
02 - HP3D, CS_H, GFX, CS_M, CS_L
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a bit needed during initialization into the driver, where it is supposed
to be.  Currently, this is happening in the VCE firmware, and although
functional, this is the correct place to perform this initialization.
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlan Harrison <Alan.Harrison@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't update display bandwidth on headless asics.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=99387Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This removes code duplication.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add cases for asics with 3 and 5 crtcs.  Fixes an artificial
limitation on asics with 3 or 5 crtcs.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=99744Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reset the fps debug information when 'fps_show' is updated.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>

Remove the hdmi_mode_property and use drm_detect_hdmi_monitor function
to check whether the connected monitor is HDMI capable or DVI only.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Unbind all the components when the STI driver is unregistered.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Do not process update requests with unmodified parameters.

This typically happens when the driver is called with legacy
(non-atomic) IOCTL : in that case atomic_update() is called multiple
times with the same parameters.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Fix a division by 0 case : in some cases, when the GDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not set parent and pixel clock rate.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Set gdp pix clock rate and parent in atomic_check function and enable
it in the atomic_update only the first time.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

stih416 chip family is no more supported in Linux v4.9.
It is then useless to keep vtg slave field since it not used at all for
the stih407/10 chip family supported by sti driver.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

stih416 chip family is no more supported in Linux v4.9.
Then sink_term config becomes useless. The field of the
register it was referring to is tag as reserved for stih410
chip family.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Fix a division by 0 case : in some cases, when the HQVDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not check for scaling capabilities.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

Use drm-core to handle event.
This is required to be able to use the nonblocking helpers.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

Since nonblocking atomic commits are now supported, the driver can
now use drm_atomic_helper_commit().
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

Some additional fixes for 4.11.  Delayed a bit due to Chinese New Year. Highlights:
- Powerplay fixes
- VCE and UVD powergating fixes
- Clean up amdgpu SI gfx code to match CI and VI
- Misc bug fixes

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
  drm/amdgpu: report the number of bytes moved at buffer creation
  drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()
  drm/amdgpu: add support for new smc firmware on polaris
  drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared.
  drm/amdgpu: shut up #warning for compile testing
  drm/amdgpu/virt: fix double kfree on bo_va
  drm/radeon: remove some dead code
  drm/radeon: avoid kernel segfault in vce when gpu fails to resume
  drm/amd/powerplay: set fan speed to max in profile peak mode only.
  drm/amd/gfx6: update gb_addr_config
  drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: refine si_read_register
  drm/amdgpu/gfx6: clean up spi configuration
  drm/amdgpu/gfx6: clean up cu configuration
  drm/amdgpu/gfx6: clean up rb configuration
  drm/amdgpu: refine vce3.0 code and related powerplay pg code.
  drm/amdgpu: move subfunctions to the front of vce_v2_0.c.
  drm/amdgpu: enable vce pg feature on Kv.
  drm/amdgpu: refine code for VCE2.0 and related dpm code.
  ...