- 03 2月, 2010 8 次提交
-
-
由 Nick Piggin 提交于
Improve handling of fragmented per-CPU vmaps. We previously don't free up per-CPU maps until all its addresses have been used and freed. So fragmented blocks could fill up vmalloc space even if they actually had no active vmap regions within them. Add some logic to allow all CPUs to have these blocks purged in the case of failure to allocate a new vm area, and also put some logic to trim such blocks of a current CPU if we hit them in the allocation path (so as to avoid a large build up of them). Christoph reported some vmap allocation failures when using the per CPU vmap APIs in XFS, which cannot be reproduced after this patch and the previous bug fix. Cc: linux-mm@kvack.org Cc: stable@kernel.org Tested-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NNick Piggin <npiggin@suse.de> -- Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
RCU list walking of the per-cpu vmap cache was broken. It did not use RCU primitives, and also the union of free_list and rcu_head is obviously wrong (because free_list is indeed the list we are RCU walking). While we are there, remove a couple of unused fields from an earlier iteration. These APIs aren't actually used anywhere, because of problems with the XFS conversion. Christoph has now verified that the problems are solved with these patches. Also it is an exported interface, so I think it will be good to be merged now (and Christoph wants to get the XFS changes into their local tree). Cc: stable@kernel.org Cc: linux-mm@kvack.org Tested-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NNick Piggin <npiggin@suse.de> -- Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: random: Remove unused inode variable crypto: padlock-sha - Add import/export support random: drop weird m_time/a_time manipulation
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Use GFP_NOFS for alloc structure GFS2: Fix previous patch GFS2: Don't withdraw on partial rindex entries GFS2: Fix refcnt leak on gfs2_follow_link() error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix access to released memory in clk_debugfs_register_one() sh: Fix access to released memory in dwarf_unwinder_cleanup() usb: r8a66597-hdc disable interrupts fix spi: spi_sh_msiof: Fixed data sampling on the correct edge
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: 64-bit: Detect virtual memory size MIPS: AR7: Fix USB slave mem range typo MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck.
-
由 Linus Torvalds 提交于
Commit 221af7f8 ("Split 'flush_old_exec' into two functions") split the function at the point of no return - ie right where there were no more error cases to check. That made sense from a technical standpoint, but when we then also combined it with the actual personality setting going in between flush_old_exec() and setup_new_exec(), it needs to be a bit more careful. In particular, we need to make sure that we really flush the old personality bits in the 'flush' stage, rather than later in the 'setup' stage, since otherwise we might be flushing the _new_ personality state that we're just setting up. So this moves the flags and personality flushing (and 'flush_thread()', which is the arch-specific function that generally resets lazy FP state etc) of the old process into flush_old_exec(), so that it doesn't affect any state that execve() is setting up for the new process environment. This was reported by Michal Simek as breaking his Microblaze qemu environment. Reported-and-tested-by: NMichal Simek <michal.simek@petalogix.com> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guenter Roeck 提交于
Linux kernel 2.6.32 and later allocate address space from the top of the kernel virtual memory address space. This patch implements virtual memory size detection for 64 bit MIPS CPUs to avoid resulting crashes. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/935/Reviewed-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 02 2月, 2010 20 次提交
-
-
由 Marek Skuczynski 提交于
Signed-off-by: NMarek Skuczynski <mareksk7@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Marek Skuczynski 提交于
Signed-off-by: NMarek Skuczynski <mareksk7@gmail.com> Acked-by: NMatt Fleming <matt@console-pimps.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by: NMagnus Damm <damm@opensource.se> Acked-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Markus Pietrek 提交于
The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0 outputs data at the **rising edge** of the clock and REDG==0 samples data at the **falling edge** of the clock. Therefore for SPI, TEDG must be equal to REDG, otherwise the last byte received is not sampled in SPI mode 3. This brings the driver in line with the SH7723 HW Reference Manual settings documented in Figures 20.20 and 20.21 ("SPI Clock and data timing"). Signed-off-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Herbert Xu 提交于
The previous changeset left behind an unused inode variable. This patch removes it. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
As the padlock driver for SHA uses a software fallback to perform partial hashing, it must implement custom import/export functions. Otherwise hmac which depends on import/export for prehashing will not work with padlock-sha. Reported-by: NWolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Matt Mackall 提交于
No other driver does anything remotely like this that I know of except for the tty drivers, and I can't see any reason for random/urandom to do it. In fact, it's a (trivial, harmless) timing information leak. And obviously, it generates power- and flash-cycle wasting I/O, especially if combined with something like hwrngd. Also, it breaks ubifs's expectations. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Alexander Clouter 提交于
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/919/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Manuel Lauss 提交于
DBDMA descriptors need to be located at 32-byte aligned addresses; however kmalloc in conjunction with the SLAB allocator and CONFIG_DEBUG_SLUB enabled doesn't deliver any. The dbdma code works around that by allocating a larger area and realigning the start address within it. When freeing a channel however this adjustment is not taken into account which results in an oops: Kernel bug detected[#1]: [...] Call Trace: [<80186010>] cache_free_debugcheck+0x284/0x318 [<801869d8>] kfree+0xe8/0x2a0 [<8010b31c>] au1xxx_dbdma_chan_free+0x2c/0x7c [<80388dc8>] au1x_pcm_dbdma_free+0x34/0x4c [<80388fa8>] au1xpsc_pcm_close+0x28/0x38 [<80383cb8>] soc_codec_close+0x14c/0x1cc [<8036dbb4>] snd_pcm_release_substream+0x60/0xac [<8036dc40>] snd_pcm_release+0x40/0xa0 [<8018c7a8>] __fput+0x11c/0x228 [<80188f60>] filp_close+0x7c/0x98 [<80189018>] sys_close+0x9c/0xe4 [<801022a0>] stack_done+0x20/0x3c Fix this by recording the address delivered by kmalloc() and using it as parameter to kfree(). This fix is only necessary with the SLAB allocator and CONFIG_DEBUG_SLAB enabled; non-debug SLAB, SLUB do return nicely aligned addresses, debug-enabled SLUB currently panics early in the boot process. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/878/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: AM3517: ASoC driver not getting compiled ASoC: AIC23: Fixing writes to non-existing registers in resume function ALSA: hda - Add an ASUS mobo to MSI blacklist
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure. drm/radeon/kms: move radeon KMS on/off switch out of staging. drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3 drm/vmwgfx: Don't send bad flags to the host drm/vmwgfx: Request SVGA version 2 and bail if not found drm/vmwgfx: Correctly detect 3D drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c drm/kms: Remove incorrect comment in struct drm_mode_modeinfo drm/ttm: remove padding from ttm_ref_object on 64bit builds drm/radeon/kms: release agp on error. drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’ drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching. drm/kms/radeon: pick digitial encoders smarter. (v3) drm/radeon/kms: use active device to pick connector for encoder drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
-
由 Linus Torvalds 提交于
Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: reiserfs: Fix vmalloc call under reiserfs lock
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Fix check_usage_backwards() error message
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails. perf: Ignore perf.data.old perf report: Fix segmentation fault when running with '-g none'
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Correct printk whitespace in warning from cpu down task check sched: Fix incorrect sanity check sched: Fix fork vs hotplug vs cpuset namespaces
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: Prevent potential kgdb dead lock
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/documentation: Cover new frame pointer semantics tracing/documentation: Fix a typo in ftrace.txt ring-buffer: Check for end of page in iterator ring-buffer: Check if ring buffer iterator has stale data tracing: Prevent kernel oops with corrupted buffer
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/agp: Fix agp_amd64_init regression x86: Add quirk for Intel DG45FC board to avoid low memory corruption x86: Add Dell OptiPlex 760 reboot quirk x86, UV: Fix RTC latency bug by reading replicated cachelines oprofile/x86: add Xeon 7500 series support oprofile/x86: fix crash when profiling more than 28 events lib/dma-debug.c: mark file-local struct symbol static. x86/amd-iommu: Fix deassignment of a device from the pt_domain x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt x86/amd-iommu: Fix NULL pointer dereference in __detach_device() x86/amd-iommu: Fix possible integer overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: TIF_ABI_PENDING bit removal powerpc/pseries: Fix xics build without CONFIG_SMP powerpc/4xx: Add pcix type 1 transactions powerpc/pci: Add missing call to header fixup powerpc/pci: Add missing hookup to pci_slot powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() powerpc/40x: Update the PowerPC 40x board defconfigs powerpc/44x: Update PowerPC 44x board defconfigs
-
- 01 2月, 2010 12 次提交
-
-
由 Mark Brown 提交于
The WM8350 LED driver needs to be able to enable and disable the regulators it is using. Previously the core wasn't properly enforcing status change constraints so the driver was able to function but this has always been intended to be required. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Steven Whitehouse 提交于
This is called under a glock, so its a good plan to use GFP_NOFS Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The do_div() call needs to remain. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
ince gfs2 writes the rindex file a block at a time, and releases the exclusive lock after each block, it is possible that another process will grab the lock in the middle of the write. Since rindex entries are not an even divisor of blocks, that other process may see partial entries. On grows, this is fine. The process can simply ignore the the partial entires. Previously, the code withdrew when it saw partial entries. Now it simply ignores them. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Schwab 提交于
Here are the powerpc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michel Dänzer 提交于
If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib being non-NULL before dereferencing it. Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
desc->affinity doesn't exit in that case. Let's use a macro for the UP variant of get_irq_server(), it's the easiest way, avoids evaluating arguments. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Airlie 提交于
We are happy enough that the KMS driver is stable enough for enough people for the kms enable/disable to leave staging. Distros can now contemplate turning this on. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
If an error happen in r600_blit_prepare_copy report it rather than WARNING and keeping execution. For instance if ib allocation failed we did just warn about but then latter tried to access NULL ib ptr causing oops. This patch also protect r600_copy_blit with a mutex as otherwise one process might overwrite blit temporary data with new one possibly leading to GPU lockup. Should partialy or totaly fix: https://bugzilla.redhat.com/show_bug.cgi?id=553279 V2 failing blit initialization is not fatal, fallback to memcpy when this happen V3 init blit before startup as we pin in startup, remove duplicate code (this one was actualy tested unlike V2) Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Peter Hanzel 提交于
This fixes the driver not loading on older versions of VMware. Signed-off-by: NPeter Hanzel <hanzelpeter@gmail.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-