The current HD-audio code manages the DRM audio power via too complex
redirections, and this seems even still unbalanced in a corner case as
Intel DRM CI has been intermittently reporting.  This patch is a big
surgery for addressing the complexity and the possible unbalance.

Basically the patch changes the display PM in the following ways:

- Both HD-audio controller and codec drivers call a single helper,
  snd_hdac_display_power().  (Formerly, the display power control from
  a codec was done indirectly via link_power bus ops.)

- snd_hdac_display_power() receives the codec address index.  For
  turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER.

- snd_hdac_display_power() doesn't manage refcounts any longer, but
  keeps the power status in bitmap.  If any of controller or codecs is
  turned on, the function updates the DRM power state via get_power()
  or put_power().

Also this refactor allows us more cleanup:

- The link_power bus ops is dropped, so there is no longer indirect
  management, as mentioned in the above.

- hdac_device link_power_control flag is moved to hda_codec
  display_power_control flag, as it's only for HDA legacy.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset().  This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.

As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.

This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The knew->iface field is in snd_ctl_elem_iface_t, which is with
__bitwise, hence it can't be converted implicitly from integer.
Give an explicit cast for the invalid type.

Spotted by sparse:
  sound/pci/hda/hda_codec.c:3280:25: warning: restricted snd_ctl_elem_iface_t degrades to integer
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split snd_hda_codec_new into two separate functions.
snd_hda_codec_device_init allocates memory and registers with bus.
snd_hda_codec_device_new initialializes the fields and performs
snd_device_new. This enables reuse of legacy HDA codec drivers as ASoC
codec drivers.

In addition mark some functions with EXPORT_SYMBOL_GPL so that it can
be called by ASoC wrapper around the legacy HDA driver (hdac_hda).
Signed-off-by: NRakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The in_pm atomic in hdac_device is an important field used as a flag
as well as a refcount for PM.  The existing snd_hdac_power_up/down
helpers already refer to it in the HD-audio core code, while the code
to actually setting the value (atomic_inc() / _dec()) is open-coded in
HDA legacy side, which is hard to find.

This patch adds the helper functions to set/reset the in_pm counter to
HDA core and use them in HDA legacy side, for making it clearer who /
where the PM is managed.

There is no functional changes, just code refactoring.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.

Let's unify and replace with the latter one consistently.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Henning Kühn reported that the discrete AMD GPU on his hybrid graphics
laptop no longer runtime-suspends due to the recent commit
07f4f97d ("vga_switcheroo: Use device link for HDA controller").

The root cause is that the HDMI codec on AMD GPU doesn't support
CLKSTOP and EPSS, which are currently mandatory for powering down the
HD-audio link at runtime suspend.  Because the HD-audio link is still
up, HD-audio controller driver blocks the transition to D3.

For addressing the regression, this patch adds a new flag to indicate
the forced link-down, and sets it for AMD HDMI codecs appropriately
in the codec driver.

Fixes: 07f4f97d ("vga_switcheroo: Use device link for HDA controller")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106957Reported-by: NLukas Wunner <lukas@wunner.de>
Reported-and-tested-by: NHenning Kühn <prg@cooco.de>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)
Signed-off-by: NKees Cook <keescook@chromium.org>

A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Put WARN_ON() and bail out if the given index is over the allocated
array of the given SPDIF controls.  It's merely a sanity check to
catch any potential issues (if any).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element.  It slightly improves the readability than
lengthy open codes at each place.

Along with it, add const prefix to some obvious places.

There should be no functional changes by this.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since sync_power_state is moved to core it's better to use the helper
function to ensure the actual power state reaches target instead of
using the local helper functions already exsisting in hda code.
Signed-off-by: NAbhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous fix for addressing the breakage in vmaster slave
initialization, commit a91d6612 ("ALSA: hda - Fix incorrect TLV
callback check introduced during set_fs() removal"), introduced a new
helper to process over each slave kctl.  However, this helper passes
only the original kctl, not the virtual slave kctl.  As a result,
HD-audio driver (which is the only user so far) couldn't initialize
the slave correctly because it's trying to update the value directly
with the original kctl, not with the mapped kctl.

This patch fixes the situation again by passing both the mapped slaved
and original slave kctls to the function.  Luckily there is a single
caller as of now, so changing the call signature is no big matter.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197959
Fixes: a91d6612 ("ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The refresh of HD-audio widget sysfs kobjects via
snd_hdac_refresh_widget_sysfs() is slightly racy.
The driver recreates the whole tree from scratch after deleting the
whole.  When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject
release doesn't happen immediately but delayed, while the re-creation
of the same named kobject happens soon after invoking kobject_put().
This may end up with the conflicts of duplicated kobjects, as found in
the bug report below.

In this patch, we take another approach to refresh the tree: instead
of recreating the whole tree, just add the new nodes and delete the
non-existing nodes.  Since the refresh happens only once at
initialization, no longer race would happen.

Along with the code change, merge snd_hdac_refresh_widget_sysfs() with
the existing snd_hdac_refresh_widgets() with an additional bool flag
for simplifying the code.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 99b5c5bb ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code.  The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.

Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check.  It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden.  Thus the
callback op points to a different value from what we've assumed.

More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall.  The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV.  Then it evaluates the callback function
pointer wrongly as if it were a TLV array.  Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.

For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves().  This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave.  Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.

Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.

Fixes: 99b5c5bb ("ALSA: hda - Remove the use of set_fs()")
Reported-by: NPaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

While converting the error messages to the standard macros in the
commit 4e76a883 ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly.  Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.

Fixes: 4e76a883 ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit fb087eaa ("ALSA: hda - hdmi eld control created based on pcm")
forget to filter out invalid pcm numbers, if there is only one invalid pcm
number, then this issue causes we create eld control for invalid pcm silently,
but when there are more than one invalid pcm numbers, then this issue bring
probe error looks like below dmesg:
"
kernel: [    1.647283] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xc2967540)
kernel: [    1.651192] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [    1.651195] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [    1.651197] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [    1.651199] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [    1.651201] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [    1.651203] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [    1.651676] snd_hda_intel 0000:00:03.0: control 3:0:0:ELD:0 is already present
kernel: [    1.651787] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -16
"

This patch add invalid pcm number filter before calling hdmi_create_eld_ctl.

Fixes: fb087eaa ("ALSA: hda - hdmi eld control created based on pcm")
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

set_fs() is used in HD-audio vmaster code to retrieve the TLV data of
each slave kctl.  Since the slave is supposed to be a standard amp
kctl, we can call directly the supposed tlv callback instead of the
indirect call, so that we can remove the set_fs() hack.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now all the users of this workaround code is gone, and we can finally
remove the legacy codes from the core HD-audio module.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The generic parser is the only user of the bind-mixer controls, so we
can move the code there and clean up the core helper.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Declare snd_kcontrol_new structures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type
const, so snd_kcontrol_new structures having the same property can be
made const too.
Done using Coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct snd_kcontrol_new i@p = {...};

@ok1@
identifier r1.i;
position p;
expression e1;
@@
snd_ctl_new1(&i@p,e1)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct snd_kcontrol_new i;
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the DP MST audio support on i915 platform and
it will enable dyn_pcm_assign feature.

DP MST supports several device entry on the same port and each
device entry can map to one pcm stream. For example, on i915,
there are 3 pins, and each pin has 3 device entries. This means
there should be 3x3 pcms. However, there is only 3 pipe lines in
i915. This means 3 pcms are actived at most at the same moment.
We will create 5 pcms (pin number + dev entry num - 1) in this case.
For the details, please refer commit a76056f2
("ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug")

Each device entry is a virtual pin. It is described by pin_nid and dev_id
in struct hdmi_spec_per_pin.
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-3-git-send-email-libin.yang@intel.com

Add snd_hda_get_dev_select() and snd_hda_set_dev_select() functions
for DP MST audio support.
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-2-git-send-email-libin.yang@intel.com

This patch fixes some warnings from klockwork.

These warnings are not the real issues. The patch
adds the sanity check.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The HDA codec driver issues snd_hda_codec_reset() at the error path of
PCM build.  This was needed in the earlier code base, but the recent
rewrite to use the standard bus binding made this a deadlock:
 modprobe        D 0000000000000005     0   720    716 0x00000080
 Call Trace:
  [<ffffffff816a5dbe>] schedule+0x3e/0x90
  [<ffffffff816a61a5>] schedule_preempt_disabled+0x15/0x20
  [<ffffffff816a7ae5>] __mutex_lock_slowpath+0xb5/0x120
  [<ffffffff816a7b6b>] mutex_lock+0x1b/0x30
  [<ffffffff8148656b>] device_release_driver+0x1b/0x30
  [<ffffffff81485c15>] bus_remove_device+0x105/0x180
  [<ffffffff814822b9>] device_del+0x139/0x260
  [<ffffffffa05e0ec5>] snd_hdac_device_unregister+0x25/0x30 [snd_hda_core]
  [<ffffffffa074fa6a>] snd_hda_codec_reset+0x2a/0x70 [snd_hda_codec]
  [<ffffffffa075007b>] snd_hda_codec_build_pcms+0x18b/0x1b0 [snd_hda_codec]
  [<ffffffffa074a44e>] hda_codec_driver_probe+0xbe/0x140 [snd_hda_codec]
  [<ffffffff81486ac4>] driver_probe_device+0x1f4/0x460
  [<ffffffff81486dc0>] __driver_attach+0x90/0xa0
  [<ffffffff81484844>] bus_for_each_dev+0x64/0xa0
  [<ffffffff814862de>] driver_attach+0x1e/0x20
  [<ffffffff81485e7b>] bus_add_driver+0x1eb/0x280
  [<ffffffff81487680>] driver_register+0x60/0xe0
  [<ffffffffa074a0da>] __hda_codec_driver_register+0x5a/0x60 [snd_hda_codec]
  [<ffffffffa070a01e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek]
  [<ffffffff810002f3>] do_one_initcall+0xb3/0x200
  [<ffffffff816a1fc5>] do_init_module+0x60/0x1f8
  [<ffffffff810ee5c3>] load_module+0x1653/0x1bd0
  [<ffffffff810eed48>] SYSC_finit_module+0x98/0xc0
  [<ffffffff810eed8e>] SyS_finit_module+0xe/0x10
  [<ffffffff816aa032>] entry_SYSCALL_64_fastpath+0x16/0x75

The simple fix is just to remove this call, since we don't need to
think about unbinding at there any longer.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=948758
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent commit [7fbe824a: ALSA: hda - Update mixer name for the
lower codec address] tried to improve the mixer chip name assignment
in the order of codec address.  However, this fix was utterly bogus;
it checks the field set in each codec, thus this value is reset at
each codec creation, of course.  For really handling this priority,
the assignment has to be remembered in the common place, namely in
hda_bus, instead of hda_codec.

Fixes: 7fbe824a ('ALSA: hda - Update mixer name for the lower codec address')
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In most cases, we prefer the onboard codec as the primary device, thus
it's better to set it as the mixer name.  Currently, however, the
mixer name is updated per the device instantiation order, and user
gets often HDMI/DP or other seen as a mixer chip name.  Also, if a
codec name is renamed by the driver, the old chip name might be left
still as the mixer name.

This patch addresses these issues by remembering the chip address that
was referred as the mixer name.  When a codec with the same or lower
address gives its name, renew the mixer name accordingly, as it's
either the update of the codec name or we get likely the more
appropriate chip as the reference.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that we have introduced the core fns we should make hda use these
helpers
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The variable pcm can be never NULL since it was rewritten with
list_for_each_entry().
Suggested-by: NMarkus Osterhoff <linux-kernel@k-raum.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit [fa4f18b4: ALSA: hda - Refresh widgets sysfs at
probing Haswell+ HDMI codecs], snd_hdac_refresh_widget_sysfs() is
explicitly called in the codec driver.  But this results in refreshing
twice, as snd_hdac_refresh_widget_sysfs() itself calls
snd_hdac_refresh_widgets() function.

Instead, we can replace the call in snd_hda_codec_update_widgets()
with snd_hdac_refresh_widget_sysfs().  This also fixes the missing
sysfs update for ca0132, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After a for-loop was replaced by list_for_each_entry, see
Commit bbbc7e85 ("ALSA: hda - Allocate hda_pcm objects dynamically"),
Commit 751e2216 ("ALSA: hda: fix possible null dereference"),
a possible NULL pointer dereference has been introduced; this patch adds
the NULL check on pcm->pcm, while leaving a potentially superfluous
check on pcm itself untouched.
Signed-off-by: NMarkus Osterhoff <linux-kernel@k-raum.org>
Cc: <stable@vger.kernel.org> #v4.1+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few helper functions to convert the pin information to strings have
been exported with assumption that they were used by other drivers.
But they are referred only in the proc interface in the end.

Let's make them local so that we can get rid of a few exports.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In kstrdup we should return -ENOMEM when it reports an
memory allocation failure, while the -ENODEV is referred
to a failure in finding the cpu node in the device tree.
Signed-off-by: NHeloise NH <kernelpatch_update@163.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_hdac_link_power() has to be called after unregistering the codec
device.  Otherwise the device might be already runtime-suspended, thus
the refcount goes under zero, triggering a warning like:

  WARNING: CPU: 7 PID: 2014 at sound/hda/hdac_i915.c:63 snd_hdac_display_power+0x106/0x120 [snd_hda_core]()
  CPU: 7 PID: 2014 Comm: modprobe Not tainted 4.1.0-rc7-test+ #1
  Call Trace:
   [<ffffffff81697fe3>] dump_stack+0x4c/0x6e
   [<ffffffff810696da>] warn_slowpath_common+0x8a/0xc0
   [<ffffffff810697ca>] warn_slowpath_null+0x1a/0x20
   [<ffffffffa02dd526>] snd_hdac_display_power+0x106/0x120 [snd_hda_core]
   [<ffffffffa030b422>] azx_intel_link_power+0x12/0x20 [snd_hda_intel]
   [<ffffffffa037139f>] azx_link_power+0x1f/0x30 [snd_hda_codec]
   [<ffffffffa02d89fe>] snd_hdac_link_power+0x2e/0x40 [snd_hda_core]
   [<ffffffffa0368524>] snd_hda_codec_dev_free+0x34/0x50 [snd_hda_codec]
   [<ffffffffa0252061>] __snd_device_free+0x51/0xa0 [snd]
   .....
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Yet another regression by the transition to regmap cache; for better
usability, we had the fake mute control using the zero amp value for
Conexant codecs, and this was forgotten in the new hda core code.

Since the bits 4-7 are unused for the amp registers (as we follow the
syntax of AMP_GET verb), the bit 4 is now used to indicate the fake
mute.  For setting this flag, snd_hda_codec_amp_update() becomes a
function from a simple macro.  The bonus is that it gained a proper
function description.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enable runtime PM of the HDMI audio codec on the latest Intel platforms.
So the HD-A controller or HDMI codec can suspend when idle timeout by
default and release the GFX power well.
The patch influences HSW/BDW/BYT/BSW/SKL. Eariler platforms and third
party analog codecs will not be influenced.
Signed-off-by: NLu, Han <han.lu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>