Testing xmit_more support with netperf and connected UDP sockets,
I found strange dst refcount false sharing.

Current handling of IFF_XMIT_DST_RELEASE is not optimal.

Dropping dst in validate_xmit_skb() is certainly too late in case
packet was queued by cpu X but dequeued by cpu Y

The logical point to take care of drop/force is in __dev_queue_xmit()
before even taking qdisc lock.

As Julian Anastasov pointed out, need for skb_dst() might come from some
packet schedulers or classifiers.

This patch adds new helper to cleanly express needs of various drivers
or qdiscs/classifiers.

Drivers that need skb_dst() in their ndo_start_xmit() should call
following helper in their setup instead of the prior :

	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
->
	netif_keep_dst(dev);

Instead of using a single bit, we use two bits, one being
eventually rebuilt in bonding/team drivers.

The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being
rebuilt in bonding/team. Eventually, we could add something
smarter later.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adjust fixed_phy_register() to return struct phy_device *, so that
it becomes easy to use fixed PHYs without device tree support:

  phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL);
  fixed_phy_set_link_update(phydev, fixed_phy_link_update);
  phy_connect_direct(netdev, phydev, handler_fn, phy_interface);

This change is a prerequisite for modifying bcmgenet driver to work
without a device tree on Broadcom's MIPS-based 7xxx platforms.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a openvswitch compilation error when CONFIG_INET is not set:

=====================================================
   In file included from include/net/geneve.h:4:0,
                       from net/openvswitch/flow_netlink.c:45:
		          include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads':
			  >> include/net/udp_tunnel.h:100:2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration]
			  >>      return iptunnel_handle_offloads(skb, udp_csum, type);
			  >>           ^
			  >>           >> include/net/udp_tunnel.h:100:2: warning: return makes pointer from integer without a cast
			  >>           >>    cc1: some warnings being treated as errors

=====================================================
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Try to reduce number of possible fn_sernum mutation by constraining them
to their namespace.

Also remove rt_genid which I forgot to remove in 705f1c86 ("ipv6:
remove rt6i_genid").

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t
to fib6_walk_state as recommended by Cong Wang.

Cc: Cong Wang <cwang@twopensource.com>
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This removes the tcf_proto argument from the ematch code paths that
only need it to reference the net namespace. This allows simplifying
qdisc code paths especially when we need to tear down the ematch
from an RCU callback. In this case we can not guarentee that the
tcf_proto structure is still valid.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NCong Wang <cwang@twopensource.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some TSO engines might have a too heavy setup cost, that impacts
performance on hosts sending small bursts (2 MSS per packet).

This patch adds a device gso_min_segs, allowing drivers to set
a minimum segment size for TSO packets, according to the NIC
performance.

Tested on a mlx4 NIC, this allows to get a ~110% increase of
throughput when sending 2 MSS per packet.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new ethtool [sg]et_tunable() to set tx_copybread (inline threshold)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Remove unused variable ring->poll_cnt
- No need to set some fields if using blueflame
- Add missing const's
- Use unlikely
- Remove unneeded new line
- Make some comments more precise
- struct mlx4_bf @offset field reduced to unsigned int to save space
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Standard qdisc API to setup a timer implies an atomic operation on every
packet dequeue : qdisc_unthrottled()

It turns out this is not really needed for FQ, as FQ has no concept of
global qdisc throttling, being a qdisc handling many different flows,
some of them can be throttled, while others are not.

Fix is straightforward : add a 'bool throttle' to
qdisc_watchdog_schedule_ns(), and remove calls to qdisc_unthrottled()
in sch_fq.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Openvswitch implementation is completely agnostic to the options
that are in use and can handle newly defined options without
further work. It does this by simply matching on a byte array
of options and allowing userspace to setup flows on this array.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Singed-off-by: NAnsis Atteka <aatteka@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NThomas Graf <tgraf@noironetworks.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the flow information that is matched for tunnels and
the tunnel data passed around with packets is the same. However,
as additional information is added this is not necessarily desirable,
as in the case of pointers.

This adds a new structure for tunnel metadata which currently contains
only the existing struct. This change is purely internal to the kernel
since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version
of OVS_KEY_ATTR_TUNNEL that is translated at flow setup.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some tunnel formats have mechanisms for indicating that packets are
OAM frames that should be handled specially (either as high priority or
not forwarded beyond an endpoint). This provides support for allowing
those types of packets to be matched.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds a device level support for Geneve -- Generic Network
Virtualization Encapsulation. The protocol is documented at
http://tools.ietf.org/html/draft-gross-geneve-01

Only protocol layer Geneve support is provided by this driver.
Openvswitch can be used for configuring, set up and tear down
functional Geneve tunnels.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the inet6 state INET6_IFADDR_STATE_UP only appeared in its definition.

Cc: Christoph Paasch <christoph.paasch@uclouvain.be>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSébastien Barré <sebastien.barre@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SKB_FCLONE_UNAVAILABLE has overloaded meaning depending on type of skb.
1: If skb is allocated from head_cache, it indicates fclone is not available.
2: If skb is a companion fclone skb (allocated from fclone_cache), it indicates
it is available to be used.

To avoid confusion for case 2 above, this patch  replaces
SKB_FCLONE_UNAVAILABLE with SKB_FCLONE_FREE where appropriate. For fclone
companion skbs, this indicates it is free for use.

SKB_FCLONE_UNAVAILABLE will now simply indicate skb is from head_cache and
cannot / will not have a companion fclone.
Signed-off-by: NVijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows configuring IPIP, sit, and GRE tunnels to use GUE.
This is very similar to fou excpet that we need to insert the GUE header
in addition to the UDP header on transmit.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support receiving for GUE packets in the fou module. The
fou module now supports direct foo-over-udp (no encapsulation header)
and GUE. To support this a type parameter is added to the fou netlink
parameters.

For a GUE socket we define gue_udp_recv, gue_gro_receive, and
gue_gro_complete to handle the specifics of the GUE protocol. Most
of the code to manage and configure sockets is common with the fou.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes fou[46]_gro_receive and fou[46]_gro_complete
functions. The v4 or v6 variants were chosen for the UDP offloads
based on the address family of the socket this is not necessary
or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb.
This is set in udp6_gro_receive and unset in udp4_gro_receive. In
fou_gro_receive the value is used to select the correct inet_offloads
for the protocol of the outer IP header.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch puts a common part as the first field of mlx5_core_qp. This field is
used to identify which resource generated an event. This is required since upcoming
new resource types such as DC targets are allocated for the same numerical space
as regular QPs and may generate the same events. By searching the resource in the
same table we can then look at the common field to identify the resource.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Transform device capabilities related commands to use set/get macros to
manipulate command mailboxes.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an auto generated header file that describes hardware registers along with
set of macros that set/get values. The macros do static checks to avoid
overflow, handle endianess, and overall provide a clean way to code commands.
Currently the header file is small and we will add structs as we make use of
the macros.
A few commands were removed from the commands enum since they are not supported
currently and will be added when support is available.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rearrange struct mlx5_caps so it has a "gen" field to represent the current
capabilities configured for the device. Max capabilities can also be queried
from the device. Also update capabilities struct to contain more fields as per
the latest revision if firmware specification.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validation of skb can be pretty expensive :

GSO segmentation and/or checksum computations.

We can do this without holding qdisc lock, so that other cpus
can queue additional packets.

Trick is that requeued packets were already validated, so we carry
a boolean so that sch_direct_xmit() can validate a fresh skb list,
or directly use an old one.

Tested on 40Gb NIC (8 TX queues) and 200 concurrent flows, 48 threads
host.

Turning TSO on or off had no effect on throughput, only few more cpu
cycles. Lock contention on qdisc lock disappeared.

Same if disabling TX checksum offload.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on DaveM's recent API work on dev_hard_start_xmit(), that allows
sending/processing an entire skb list.

This patch implements qdisc bulk dequeue, by allowing multiple packets
to be dequeued in dequeue_skb().

The optimization principle for this is two fold, (1) to amortize
locking cost and (2) avoid expensive tailptr update for notifying HW.
 (1) Several packets are dequeued while holding the qdisc root_lock,
amortizing locking cost over several packet.  The dequeued SKB list is
processed under the TXQ lock in dev_hard_start_xmit(), thus also
amortizing the cost of the TXQ lock.
 (2) Further more, dev_hard_start_xmit() will utilize the skb->xmit_more
API to delay HW tailptr update, which also reduces the cost per
packet.

One restriction of the new API is that every SKB must belong to the
same TXQ.  This patch takes the easy way out, by restricting bulk
dequeue to qdisc's with the TCQ_F_ONETXQUEUE flag, that specifies the
qdisc only have attached a single TXQ.

Some detail about the flow; dev_hard_start_xmit() will process the skb
list, and transmit packets individually towards the driver (see
xmit_one()).  In case the driver stops midway in the list, the
remaining skb list is returned by dev_hard_start_xmit().  In
sch_direct_xmit() this returned list is requeued by dev_requeue_skb().

To avoid overshooting the HW limits, which results in requeuing, the
patch limits the amount of bytes dequeued, based on the drivers BQL
limits.  In-effect bulking will only happen for BQL enabled drivers.

Small amounts for extra HoL blocking (2x MTU/0.24ms) were
measured at 100Mbit/s, with bulking 8 packets, but the
oscillating nature of the measurement indicate something, like
sched latency might be causing this effect. More comparisons
show, that this oscillation goes away occationally. Thus, we
disregard this artifact completely and remove any "magic" bulking
limit.

For now, as a conservative approach, stop bulking when seeing TSO and
segmented GSO packets.  They already benefit from bulking on their own.
A followup patch add this, to allow easier bisect-ability for finding
regressions.

Jointed work with Hannes, Daniel and Florian.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce netdev IOCTLs, to be used by the debug tools.

Allows to read/write single dword value or
memory block, aligned to dword
Different address modes supported:
- BAR offset
- Firmware "linker" address
- target's AHB bus
Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

* Consistently use the multi-line comment style for networking code:

  /* This
   * That
   * The other thing
   */

* Use single-line comment style for comments with only one line of text.

* In general follow the leading '*' of each line of a comment with a
  single space and then text.

* Add missing line break between functions, remove double line break,
  align comments to previous lines whenever possible.
Reported-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

You can use physdev to match the physical interface enslaved to the
bridge device. This information is stored in skb->nf_bridge and it is
set up by br_netfilter. So, this is only available when iptables is
used from the bridge netfilter path.

Since 34666d46 ("netfilter: bridge: move br_netfilter out of the core"),
the br_netfilter code is modular. To reduce the impact of this change,
we can autoload the br_netfilter if the physdev match is used since
we assume that the users need br_netfilter in place.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Move nf_send_reset() and nf_send_reset6() to nf_reject_ipv4 and
nf_reject_ipv6 respectively. This code is shared by x_tables and
nf_tables.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch introduces the NFT_REJECT_ICMPX_UNREACH type which provides
an abstraction to the ICMP and ICMPv6 codes that you can use from the
inet and bridge tables, they are:

* NFT_REJECT_ICMPX_NO_ROUTE: no route to host - network unreachable
* NFT_REJECT_ICMPX_PORT_UNREACH: port unreachable
* NFT_REJECT_ICMPX_HOST_UNREACH: host unreachable
* NFT_REJECT_ICMPX_ADMIN_PROHIBITED: administratevely prohibited

You can still use the specific codes when restricting the rule to match
the corresponding layer 3 protocol.

I decided to not overload the existing NFT_REJECT_ICMP_UNREACH to have
different semantics depending on the table family and to allow the user
to specify ICMP family specific codes if they restrict it to the
corresponding family.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NPetri Gynther <pgynther@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmai.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the following crash:

[   63.976822] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[   63.980094] CPU: 1 PID: 15 Comm: ksoftirqd/1 Not tainted 3.17.0-rc6+ #648
[   63.980094] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   63.980094] task: ffff880117dea690 ti: ffff880117dfc000 task.ti: ffff880117dfc000
[   63.980094] RIP: 0010:[<ffffffff817e6d07>]  [<ffffffff817e6d07>] u32_destroy_key+0x27/0x6d
[   63.980094] RSP: 0018:ffff880117dffcc0  EFLAGS: 00010202
[   63.980094] RAX: ffff880117dea690 RBX: ffff8800d02e0820 RCX: 0000000000000000
[   63.980094] RDX: 0000000000000001 RSI: 0000000000000002 RDI: 6b6b6b6b6b6b6b6b
[   63.980094] RBP: ffff880117dffcd0 R08: 0000000000000000 R09: 0000000000000000
[   63.980094] R10: 00006c0900006ba8 R11: 00006ba100006b9d R12: 0000000000000001
[   63.980094] R13: ffff8800d02e0898 R14: ffffffff817e6d4d R15: ffff880117387a30
[   63.980094] FS:  0000000000000000(0000) GS:ffff88011a800000(0000) knlGS:0000000000000000
[   63.980094] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   63.980094] CR2: 00007f07e6732fed CR3: 000000011665b000 CR4: 00000000000006e0
[   63.980094] Stack:
[   63.980094]  ffff88011a9cd300 ffffffff82051ac0 ffff880117dffce0 ffffffff817e6d68
[   63.980094]  ffff880117dffd70 ffffffff810cb4c7 ffffffff810cb3cd ffff880117dfffd8
[   63.980094]  ffff880117dea690 ffff880117dea690 ffff880117dfffd8 000000000000000a
[   63.980094] Call Trace:
[   63.980094]  [<ffffffff817e6d68>] u32_delete_key_freepf_rcu+0x1b/0x1d
[   63.980094]  [<ffffffff810cb4c7>] rcu_process_callbacks+0x3bb/0x691
[   63.980094]  [<ffffffff810cb3cd>] ? rcu_process_callbacks+0x2c1/0x691
[   63.980094]  [<ffffffff817e6d4d>] ? u32_destroy_key+0x6d/0x6d
[   63.980094]  [<ffffffff810780a4>] __do_softirq+0x142/0x323
[   63.980094]  [<ffffffff810782a8>] run_ksoftirqd+0x23/0x53
[   63.980094]  [<ffffffff81092126>] smpboot_thread_fn+0x203/0x221
[   63.980094]  [<ffffffff81091f23>] ? smpboot_unpark_thread+0x33/0x33
[   63.980094]  [<ffffffff8108e44d>] kthread+0xc9/0xd1
[   63.980094]  [<ffffffff819e00ea>] ? do_wait_for_common+0xf8/0x125
[   63.980094]  [<ffffffff8108e384>] ? __kthread_parkme+0x61/0x61
[   63.980094]  [<ffffffff819e43ec>] ret_from_fork+0x7c/0xb0
[   63.980094]  [<ffffffff8108e384>] ? __kthread_parkme+0x61/0x61

tp could be freed in call_rcu callback too, the order is not guaranteed.

John Fastabend says:

====================
Its worth noting why this is safe. Any running schedulers will either
read the valid class field or it will be zeroed.

All schedulers today when the class is 0 do a lookup using the
same call used by the tcf_exts_bind(). So even if we have a running
classifier hit the null class pointer it will do a lookup and get
to the same result. This is particularly fragile at the moment because
the only way to verify this is to audit the schedulers call sites.
====================

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_udp_segment is the function called from udp4_ufo_fragment to
segment a UDP tunnel packet. This function currently assumes
segmentation is transparent Ethernet bridging (i.e. VXLAN
encapsulation). This patch generalizes the function to
operate on either Ethertype or IP protocol.

The inner_protocol field must be set to the protocol of the inner
header. This can now be either an Ethertype or an IP protocol
(in a union). A new flag in the skbuff indicates which type is
effective. skb_set_inner_protocol and skb_set_inner_ipproto
helper functions were added to set the inner_protocol. These
functions are called from the point where the tunnel encapsulation
is occuring.

When skb_udp_tunnel_segment is called, the function to segment the
inner packet is selected based on the inner IP or Ethertype. In the
case of an IP protocol encapsulation, the function is derived from
inet[6]_offloads. In the case of Ethertype, skb->protocol is
set to the inner_protocol and skb_mac_gso_segment is called. (GRE
currently does this, but it might be possible to lookup the protocol
in offload_base and call the appropriate segmenation function
directly).
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lets use a proper structure to clearly document and implement
skb fast clones.

Then, we might experiment more easily alternative layouts.

This patch adds a new skb_fclone_busy() helper, used by tcp and xfrm,
to stop leaking of implementation details.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No caller uses the return value, so make this function return void.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the new flow, we separate the pci initialization and teardown
from the initialization and teardown of the other resources.

__mlx4_init_one handles the pci resources initialization. It then
calls mlx4_load_one to initialize the remainder of the resources.

When removing a device, mlx4_remove_one is invoked. However, now
mlx4_remove_one calls mlx4_unload_one to free all the resources except the pci
resources. When mlx4_unload_one returns, mlx4_remove_one then frees the
pci resources.

The above separation will allow us to implement 'reset flow' in the future.
It will also enable more EQs for VFs and is a pre-step to the modern API to
enable/disable SRIOV.

Also added nvfs; an integer array of size MLX4_MAX_PORTS + 1; to the mlx4_dev
struct. This new field is used to avoid parsing the num_vfs module parameter
each time the mlx4_restart_one is called.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet noticed that all no-nonexthop or no-gateway routes which
are already marked DST_HOST (e.g. input routes routes) will always be
invalidated during sk_dst_check. Thus per-socket dst caching absolutely
had no effect and early demuxing had no effect.

Thus this patch removes rt6i_genid: fn_sernum already gets modified during
add operations, so we only must ensure we mutate fn_sernum during ipv6
address remove operations. This is a fairly cost extensive operations,
but address removal should not happen that often. Also our mtu update
functions do the same and we heard no complains so far. xfrm policy
changes also cause a call into fib6_flush_trees. Also plug a hole in
rt6_info (no cacheline changes).

I verified via tracing that this change has effect.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver is used by the bcm53xx ARM SoC code. Now it is possible to
give the address of the chipcommon core in device tree and bcma will
search for all the other cores.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

After previous patches to simplify qstats the qstats can be
made per cpu with a packed union in Qdisc struct.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>