- 19 7月, 2021 21 次提交
-
-
由 James Smart 提交于
During RSCN storms, some instances of LIP on SLI-3 adapters lead to a situation where FLOGIs keep failing with firmware indicating an illegal command error code. This situation was preceded by an ADISC completion that was processed while the link was down. This path on SLI-3 performs a CLEAR_LA and attempts to activate a VPI with REG_VPI. Later, as the FLOGI completes, it's no longer in sync with the VPI state. In SLI-3 it is illegal to have an active VPI during FLOGI. Resolve by circumventing the SLI-3 path that performs the CLEAR_LA and REG_VPI. The path will be taken after the FLOGI after the next Link Up. Link: https://lore.kernel.org/r/20210707184351.67872-18-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
In the PLOGI and ADISC completion handling, the device removal event could be skipped during some link errors. This could leave a stale node in UNUSED state. Driver unload would hang for a long time waiting for this node to be freed. Resolve by taking the following steps: - Always post ADISC completion events to discovery state machine upon ADISC completion. - In case of a completion error for PLOGI/ADISC, ensure that init refcount is dropped if not registered with transport. Link: https://lore.kernel.org/r/20210707184351.67872-17-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state are moved to NPR state in order to revalidate the login. This triggers an immediate unregister from SCSI/NVMe backend. The assumption is that the node may be missing. The re-registration with the backend happens after either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or when ADISC completes successfully (rediscover with ADISC enabled). However, the NVMe-FC standard provides for an RSCN to be triggered when the remote port supports a discovery controller and there was a change of discovery log content. As the remote port typically also supports storage subsystems, this unregister causes all storage controller connections to fail and require reconnect. Correct by reworking the code to ensure that the unregistration only occurs when a login state is truly terminated, thereby leaving the NVMe storage controllers in place. The changes made are: - Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry. - Do not clear wwpn/wwnn values upon ADISC failure. - Move MAPPED nodes to NPR during RSCN processing, but do not unregister with transport. On GIDFT completion, identify missing nodes (not marked NLP_NPR_2B_DISC) and unregister them. - Perform unregistration for nodes that will go through ADISC processing if ADISC completion fails. - Successful ADISC completion will move node back to MAPPED state. Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Assign a default value of 1 to driver module parameter lpfc_use_adisc. Link: https://lore.kernel.org/r/20210707184351.67872-15-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The SLI4 interface changed the manner used to indicate PBDE support. Rework the driver to check for PBDE support via the PBDE feature bit in COMMON_GET_SLI4_PARAMETERS. Link: https://lore.kernel.org/r/20210707184351.67872-14-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Mailbox commands sent via ioctl/bsg from user applications may be interrupted from processing by a concurrently triggered PCI function reset. The command will not generate a completion due to the reset. This results in a user application hang waiting for the mailbox command to complete. Resolve by changing the function reset handler to detect that there was an outstanding mailbox command and simulate a mailbox completion. Add some additional debug when a mailbox command times out. Link: https://lore.kernel.org/r/20210707184351.67872-13-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
In lpfc_offline_prep() an RPI is freed and nlp_rpi set to 0xFFFF before calling lpfc_unreg_rpi(). Unfortunately, lpfc_unreg_rpi() uses nlp_rpi to index the sli4_hba.rpi_ids[] array. In lpfc_offline_prep(), unreg rpi before freeing the rpi. Link: https://lore.kernel.org/r/20210707184351.67872-12-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Since the REG_LOGIN to the fabric controller happens in parallel with SCR, it may or may not be completed by the time RDF is sent. RDF and SCR are sent to the fabric in parallel, so checking for a completed REG_LOGIN in the RDF submit path is not needed. Remove the REG_LOGI check from the RDF submission path. Link: https://lore.kernel.org/r/20210707184351.67872-11-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The ELS job request structure, that is allocated while issuing ELS RDF/SCR request path, is not being released in an error path causing a memory leak message on driver unload. Free the ELS job structure in the error paths. Link: https://lore.kernel.org/r/20210707184351.67872-10-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
RDF ELS handling for NPIV ports may result in an incorrect NDLP reference count. In the event of a persistent link down, this may lead to premature release of an NDLP structure and subsequent NULL ptr dereference panic. Remove extraneous lpfc_nlp_put() call in NPIV port RDF processing. Link: https://lore.kernel.org/r/20210707184351.67872-9-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
In the routine that generically cleans up an ELS after completion, the NDLP put is done prior to the freeing of the IOCB. The IOCB may reference the NDLP. Move the lpfc_nlp_put() after freeing the IOCB. Link: https://lore.kernel.org/r/20210707184351.67872-8-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Previous logic accidentally overrides the status variable to FAILURE when target reset status is SUCCESS. Refactor the non-SUCCESS logic of lpfc_vmid_vport_cleanup(), which resolves the false override. Link: https://lore.kernel.org/r/20210707184351.67872-7-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
If a LOGO is received for a node that is in the NPR state, post a DEVICE_RM event to allow clean up of the logged out node. Clearing the NLP_NPR_2B_DISC flag upon receipt of a LOGO ACC may cause skipping of processing outstanding PLOGIs triggered by parallel RSCN events. If an outstanding PLOGI is being retried and receipt of a LOGO ACC occurs, then allow the discovery state machine's PLOGI completion to clean up the node. Link: https://lore.kernel.org/r/20210707184351.67872-6-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Update comment headers for functions lpfc_vmid_cmd and lpfc_vmid_poll. Link: https://lore.kernel.org/r/20210707184351.67872-5-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Define additional status fields in mailbox commands to help provide additional information when downloading new firmware. Link: https://lore.kernel.org/r/20210707184351.67872-4-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
There are instances when trace event logs are triggered from an interrupt context. The trace event log may attempt to alloc memory causing scheduling while atomic bug call traces. Remove the need for the kmalloc'ed vport array when checking the log_verbose flag, which eliminates the need for any allocation. Link: https://lore.kernel.org/r/20210707184351.67872-3-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
The NVMe support indicator in log message 6422 is displaying a field that was initialized but never set to indicate NVMe support. Remove obsolete nvme_support element from the lpfc_hba structure and change log message to display NVMe support status as reported in SLI4 Config Parameters mailbox command. Link: https://lore.kernel.org/r/20210707184351.67872-2-jsmart2021@gmail.comCo-developed-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJustin Tee <justin.tee@broadcom.com> Signed-off-by: NJames Smart <jsmart2021@gmail.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
flush_kernel_dcache_page() is not used by aacraid, and this header already comes in through the scatterlist/block headers anyway. Link: https://lore.kernel.org/r/20210712060928.4161649-6-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Colin Ian King 提交于
The continue statement at the end of the for-loop is redundant, remove it. Link: https://lore.kernel.org/r/20210702131542.19880-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Continue has no effect")
-
由 Mike Christie 提交于
This fixes a bug found by Lv Yunlong where, because beiscsi_exec_nemb_cmd() frees memory for the be_dma_mem cmd(), we can access freed memory when beiscsi_if_clr_ip()/beiscsi_if_set_ip()'s call to beiscsi_exec_nemb_cmd() fails and we access the freed req. This fixes the issue by having the caller free the cmd's memory. Link: https://lore.kernel.org/r/20210701190840.175120-1-michael.christie@oracle.comReported-by: NLv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: NMike Christie <michael.christie@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Keoseong Park 提交于
Simplify if-else statement to return statement and remove code related to CONFIG_SCSI_UFS_DWC that is not in use. Link: https://lore.kernel.org/r/1891546521.01624860001810.JavaMail.epsvc@epcpadp3 Cc: Joao Pinto <jpinto@synopsys.com> Reviewed-by: NBean Huo <beanhuo@micron.com> Reviewed-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NKeoseong Park <keosung.park@samsung.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 14 7月, 2021 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
Fix the following fallthrough warning (arm64-randconfig with Clang): drivers/scsi/libsas/sas_discover.c:467:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Reported-by: Nkernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
-
- 13 7月, 2021 7 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds a host_lock which existed before on ufshcd_vops_setup_xfer_req(). Link: https://lore.kernel.org/r/20210701005117.3846179-1-jaegeuk@kernel.org Fixes: a45f9371 ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Can Guo <cang@codeaurora.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Fix for the following W=1 compilation warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 64 Link: https://lore.kernel.org/r/20210707081756.20922-1-sreekanth.reddy@broadcom.comReported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NSreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings then test again, wash, rinse, find more, then repeat more/again. Also fix spellos, some grammar, and some punctuation. ../drivers/scsi/pm8001/pm8001_ctl.c:557: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_fatal_log_show - fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** non_fatal_log_show - non fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:622: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_gsm_log_show - gsm dump collection Link: https://lore.kernel.org/r/20210708165723.8594-1-rdunlap@infradead.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NJack Wang <jinpu.wang@ionos.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Tyrel Datwyler 提交于
Commit 66a834d0 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com Fixes: 66a834d0 ("scsi: core: Fix error handling of scsi_host_alloc()") Cc: stable@vger.kernel.org Reviewed-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NTyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
Use SAM_STAT_GOOD instead of GOOD since GOOD has been removed. Link: https://lore.kernel.org/r/20210711033623.11267-1-bvanassche@acm.org Fixes: 3d45cefc ("scsi: core: Drop obsolete Linux-specific SCSI status codes") Fixes: df130314 ("scsi: fas216: Use get_status_byte() to avoid using Linux-specific status codes") Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bart Van Assche 提交于
The unit of the scsi_execute() timeout parameter is 1/HZ seconds instead of one second, just like the timeouts used in the block layer. Fix the documentation header above the definition of the scsi_execute() macro. Link: https://lore.kernel.org/r/20210709202638.9480-3-bvanassche@acm.org Fixes: "[SCSI] use scatter lists for all block pc requests and simplify hw handlers" # v2.6.16.28 Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: John Garry <john.garry@huawei.com> Reviewed-by: NAvri Altman <avri.altman@wdc.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
No need to give up the original sd minor even with this option, and if we did we'd also need to fix the number of minors for this configuration to actually work. Fixes: 7c3f828b ("block: refactor device number setup in __device_add_disk") Reported-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 7月, 2021 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough; statement. Notice that this seems to be a Duff device for performance[1]. So, although the code looks a bit _funny_, I didn't want to refactor or modify it beyond merely adding a fallthrough marking, which might be the least disruptive way to fix this issue. [1] https://www.drdobbs.com/a-reusable-duff-device/184406208 Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
-
- 05 7月, 2021 1 次提交
-
-
由 Martin K. Petersen 提交于
Commit d2bcbeab ("scsi: blkcg: Add app identifier support for blkcg") introduced an FC_APPID config option under SCSI. However, the added config option is not used anywhere. Simply remove it. The block layer BLK_CGROUP_FC_APPID config option is what actually controls whether the application ID code should be built or not. Make this option dependent on NVMe over FC since that is currently the only transport which supports the capability. Fixes: d2bcbeab ("scsi: blkcg: Add app identifier support for blkcg") Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 7月, 2021 1 次提交
-
-
由 Christoph Hellwig 提交于
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_* or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests into a single one. Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 30 6月, 2021 4 次提交
-
-
由 Xie Yongji 提交于
This ensures that the residual bytes in response (might come from an untrusted device) will not exceed the data buffer length. Link: https://lore.kernel.org/r/20210615105218.214-1-xieyongji@bytedance.comAcked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NXie Yongji <xieyongji@bytedance.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Wen Xiong 提交于
Test team saw "4041: Incomplete multipath connection between enclosure and device" when I/O drawers/drives have bad connections. System crashes when handling these type 20 errors. [ 5.332452] ipr: 3/00-06-09: 4041: Incomplete multipath connection between enclosure and device [ 5.332460] ipr: 3/00-06-09: The IOA failed to detect an expected path to a device [ 5.332465] ipr: 3/00-06-09: Inactive path is failed: Resource Path=3/00-04-09 [ 5.332471] ipr: 3/00-06-09: Functional IOA port: Resource Path=3/00-04, Link rate=unknown, WWN=5005076059C38E05 [ 5.332478] ipr: 3/00-06-09: Incorrectly connected Device LUN: Resource Path=3/00-00-00-00-00-00-00-00-00-20-00-00-24-00-00-00-0, Link rate=unknown, WWN=0020000024000000 [ 5.332487] ipr: 3/00-06-09: Path element=FF: Resource Path=3/50-05-07-60-45-56-5A-9C-00-00-00-00-00-00-00-00-0, Link rate=unknown WWN=0000000000000000 [ 5.332492] ipr: 00000000: 54520EC8 00000000 00000000 4E532050 [ 5.332495] ipr: 00000010: 45522054 49434B3D 00000050 278130E6 [ 5.332498] ipr: 00000020: 033B5300 03282584 4C4D00E0 278039F3 [ 5.332501] ipr: 00000030: 033B5180 03282404 4C4D00E0 276A0282 [ 5.332504] ipr: 00000040: 033B5000 03281E04 447000E0 27697D19 [ 5.332507] ipr: 00000050: 033B4E80 03281D84 447000E0 27690524 [ 5.332509] ipr: 00000060: 033B4D00 03281C84 447000E0 27687FDA [ 5.332512] ipr: 00000070: 033B4B80 03281C04 447000E0 2767E787 [ 5.332515] ipr: 00000080: 033B4A00 03281B04 447000E0 27674F0A Link: https://lore.kernel.org/r/1624587085-10073-1-git-send-email-wenxiong@linux.vnet.ibm.comAcked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quat Le 提交于
If the device is power-cycled, it takes time for the initiator to transmit the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to respond to the primitive to become ACTIVE. Retry the I/O request to allow the device time to become ACTIVE. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.comReviewed-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NQuat Le <quat.le@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Fix the following warning reported by static analysis tool smatch: smatch warnings: drivers/scsi/mpi3mr/mpi3mr_os.c:873 mpi3mr_update_tgtdev() error: we previously assumed 'mrioc->shost' could be null (see line 870 Link: https://lore.kernel.org/r/20210629141153.3158-1-sreekanth.reddy@broadcom.comReported-by: Nkernel test robot <lkp@intel.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NSreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 29 6月, 2021 2 次提交
-
-
由 Javed Hasan 提交于
A race condition was observed between qedf_cleanup_fcport() and qedf_process_error_detect()->qedf_initiate_abts(): [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0 [2069091.233420] Oops: 0000 [#1] SMP [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P OE ------------ 3.10.0-1160.25.1.el7.x86_64 #1 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>] [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.443666] RSP: 0018:ffff9bacaef9fdb8 EFLAGS: 00010246 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040 [2069091.529472] FS: 0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000 [2069091.543926] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2069091.602007] PKRU: 00000000 [2069091.616010] Call Trace: [2069091.629902] [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf] [2069091.643941] [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf] [2069091.657948] [<ffffffff85ebddcf>] process_one_work+0x17f/0x440 [2069091.672111] [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0 [2069091.686057] [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0 [2069091.700033] [<ffffffff85ec5da1>] kthread+0xd1/0xe0 [2069091.713891] [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40 Add check in qedf_process_error_detect(). When flush is active, let the cmds be completed from the cleanup contex. Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.comSigned-off-by: NJaved Hasan <jhasan@marvell.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Javed Hasan 提交于
Fix array index out of bound exception in fc_rport_prli_resp(). Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.comSigned-off-by: NJaved Hasan <jhasan@marvell.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 23 6月, 2021 2 次提交
-
-
由 Zhen Lei 提交于
Use DEVICE_ATTR_RO()/RW() macro helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210616034419.725-5-thunder.leizhen@huawei.comSigned-off-by: NZhen Lei <thunder.leizhen@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Zhen Lei 提交于
Use DEVICE_ATTR_ADMIN_RO() macro helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210616034419.725-4-thunder.leizhen@huawei.comSigned-off-by: NZhen Lei <thunder.leizhen@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-