BugLink: https://launchpad.net/bugs/420578

The OR has verified that his hardware distorts because of the 0 dB
offset not corresponding to the highest PCM level. Fix this by capping
said PCM level to 0 dB similarly to what we do for CX20549 (Venice).
Reported-by: NMike Pontillo <pontillo@gmail.com>
Tested-by: NMike Pontillo <pontillo@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Adding this PCI quirk fixes the board config detection.
This also fixes jack sensing by using "hp_detect=1" via properly detected
board config.
Signed-off-by: NKunal Gangakhedkar <kunal.gangakhedkar@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few lines earlier bend is limited to 2399.  So semitones is always
less than 24 here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/538895

The OR has verified that both position_fix=1 and model=6stack-dig are
necessary to have capture function properly. (The existing 3stack-6ch
model quirk seems to be incorrect.)
Reported-by: NReuben Bailey <reuben.e.bailey@gmail.com>
Tested-by: NReuben Bailey <reuben.e.bailey@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Judging from the member of enable_msi white-list, Nvidia controller
seems to cause troubles with MSI enabled, e.g. boot hang up or other
serious issue may come up.  It's safer to disable MSI as default for
Nvidia controllers again for now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

This should make the speakers and jack detection work on MSI all-in-one
computers NetOn AP1900 and Wind Top AE2220.
Signed-off-by: NAnisse Astier <anisse@astier.eu>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix adc_nids[] for ALC260 basic model to match with num_adc_nids.
Otherwise you get an invalid NID in the secondary "Input Source" mixer
element.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

Add an error message to snd_hda_add_nid() for invalid mapping NID to make
easier to hunt the buggy code.

Also added a missing space to the error message in snd_hda_build_controls()
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a PCI controller id on new Dell laptops.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

without the following patch audio ssttuutteerrs on
ASUS M2N32-SLI PREMIUM ACPI BIOS Revision 1304
the sound device is:
00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
worked with 2.6.32
Signed-off-by: NRalf Gerbig <rge@quengel.org>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix 'else' placement in ifdef block so that build succeeds:

sound/isa/opti9xx/opti92x-ad1848.c:221: error: 'else' without a previous 'if'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since alc_auto_create_input_ctls() doesn't set the elements for the
secondary ADCs, "Input Source" elemtns for these also get empty, resulting
in buggy outputs of alsactl like:
	control.14 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		iface MIXER
		name 'Input Source'
		index 1
		value 0
	}

This patch fixes alc_mux_enum_*() (and others) to fall back to the
first entry if the secondary input mux is empty.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

Fix a wrong value passed to snd_hda_check_board_codec_sid_config() as
the upper-limit in parse_alc268(), so that any wrong value can't be
passed.

So far, no bogus value was set in the quirk entries, so this won't give
any behavioral changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also change printk level for the two others.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create patch_hdmi.c to hold common code from intelhdmi and nvhdmi.

For now the patch_hdmi.c file is simply included by patch_intelhdmi.c
and patch_nvhdmi.c, and does not represent a real codec.

There are no behavior changes to intelhdmi. However nvhdmi made several
changes when copying code out of intelhdmi, which are all reverted in
this patch. Wei Ni confirmed that the reverted code actually works fine.
Tested-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The headphone detect and charger are using the IRQ numbers so need
to take account of irq_base with the genirq conversion. I obviously
picked the wrong system for initial testing.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

To better match genirq.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This avoids a lockup at boot.
Signed-off-by: NMichele Ballabio <barra_cuda@katamail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rename for_each_bit to for_each_set_bit in the kernel source tree.  To
permit for_each_clear_bit(), should that ever be added.

The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit().  This is a (very) temporary thing to ease the migration.

[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit eaa9b3a7 introduced the following
uninitialized warning:

	sound/pci/hda/patch_realtek.c: In function 'set_capture_mixer':
	sound/pci/hda/patch_realtek.c:4928: warning: 'pin' is used uninitialized in this function
	sound/pci/hda/patch_realtek.c:4918: note: 'pin' was declared here

It appears indeed that 'pin' needs to be initialized to 0.
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/523953

The OR has verified that position_fix=1 is necessary to work around
errors on his machine.

Reported-by: MMarking
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

While trying to compile jazz16 isa sound driver on alpha (2.6.33+git), I
found a compile failure in jazz16.c (udelay is unknown). Fix it by
including delay.h.
Signed-foo-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reorgs of the Samsung headers have moved the GPIO bank definitions
from plat/ to mach/ - the IIS driver needs to be updated to take care
of this.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

BugLink: https://launchpad.net/bugs/530346

The OR has verified that position_fix=1 is necessary to work around
errors on his machine.

Reported-by: Tom Louwrier
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now two modules require hda_eld.o, so we need to put it to the common
place instead of building into two individual modules.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support nvidia MCP89 and GT21x 8ch hdmi audio.
Add some eld support.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support max codecs to 8 for nvidia hda controller.
Change AZX_MAX_CODECS to 8, and add
"#define AZX_DEFAULT_CODECS 4" for default driver.
Set azx_max_codecs to 8 for nvidia controller.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If getpaths() returned an odd number this would be a buffer under-run and an
endless loop.  It turns out that getpaths() can only return even numbers, but
let's make it easy for people auditing code.  With the new code you don't
need to look at getpaths().

This silences a smatch warning.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Do not use hardcoded SNDRV_TIMER_EVENT_START value.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the original code the condition was always true (hopefully) because
WM8776_HPLVOL is zero.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Master Control port (MC) is available as the last
PnP resource (OPT005). Use this value instead fo guessing.

Also, add some comments to the code.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't touch the variable 'reg' to construct the value for the actual SPI
transport. This variable is again used to access the driver's register
cache, and so random memory is overwritten.
Compute the value in-place instead.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The codec_dai needs to be shutdown should the machine startup fails.
This patch adds another bailout tag for that case and rename the tag
for configuration failures.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch works around misbehaviour of Creative Creative VF0470 Live Cam
which reports 16 kHz sample rate for audio capture while actually producing
8 kHz stream.
Signed-off-by: NArseniy Lartsev <arseniy@fizlesh.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove some code that is no longer needed now that the relevant parts of
the driver have been tested.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

sound/usb/caiaq/midi.h:6: ERROR: "foo* bar" should be "foo *bar"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Acked-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/oss/coproc.h:7: ERROR: trailing whitespace
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/oss/v_midi.h:5: ERROR: code indent should use tabs where possible
sound/oss/v_midi.h:7: ERROR: trailing whitespace
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NNorberto Lopes <nlopes.ml@gmail.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>