The allocated size can be (at least?) as large as megabytes, and
there's no need for it to be physically contiguous.

May avoid spurious failures to initialize / suspend the corresponding
block while there's memory pressure.

Bugzilla: https://bugs.freedesktop.org/107432Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since Haswell we have no color range indication either in the pipe or
port registers for DP. Instead, there's a separate register for setting
the DP Main Stream Attributes (MSA) directly. The MSA register
definition makes no references to colorimetry, just a vague reference to
the DP spec. The connection to the color range was lost.

Apparently we've failed to set the proper MSA bit for limited, or CEA,
range ever since the first DDI platforms. We've started setting other
MSA parameters since commit dae84799 ("drm/i915: add
intel_ddi_set_pipe_settings").

Without the crucial bit of information, the DP sink has no way of
knowing the source is actually transmitting limited range RGB, leading
to "washed out" colors. With the colorimetry information, compliant
sinks should be able to handle the limited range properly. Native
(i.e. non-LSPCON) HDMI was not affected because we do pass the color
range via AVI infoframes.

Though not the root cause, the problem was made worse for DDI platforms
with commit 55bc60db ("drm/i915: Add "Automatic" mode for the
"Broadcast RGB" property"), which selects limited range RGB
automatically based on the mode, as per the DP, HDMI and CEA specs.

After all these years, the fix boils down to flipping one bit.

[Per testing reports, this fixes DP sinks, but not the LSPCON. My
 educated guess is that the LSPCON fails to turn the CEA range MSA into
 AVI infoframes for HDMI.]
Reported-by: NMichał Kopeć <mkopec12@gmail.com>
Reported-by: NN. W. <nw9165-3201@yahoo.com>
Reported-by: NNicholas Stommel <nicholas.stommel@gmail.com>
Reported-by: NTom Yan <tom.ty89@gmail.com>
Tested-by: NNicholas Stommel <nicholas.stommel@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=100023
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.9+
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.nikula@intel.com
(cherry picked from commit dc5977da99ea28094b8fa4e9bacbd29bedc41de5)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

The call to i915_gem_unpark() checks that we hold a rpm wakeref before
taking a long term wakeref for i915->gt.awake. We should therefore make
sure we do hold the wakeref when directly calling unpark to disable
the retire worker.

Fixes: 932cac10 ("drm/i915/selftests: Prevent background reaping of active objects")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180809063449.4474-1-chris@chris-wilson.co.uk
(cherry picked from commit 7b5ee80a5da3ea44c5abff48e3621135ae9d8177)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

On suspend, we cancel the automatic forcewake and clear all other sources
of forcewake so the machine can sleep before we do suspend. However, we
expose the forcewake to userspace (only via debugfs, but nevertheless we
do) and want to restore that upon resume or else our accounting will be
off and we may not acquire the forcewake before we use it. So record
which domains we cleared on suspend and reacquire them early on resume.

v2: Hold the spinlock to appease our sanitychecks
v3: s/fw_domains_user/fw_domains_saved/ to convey intent more clearly
Reported-by: NImre Deak <imre.deak@linux.intel.com>
Fixes: b8473050 ("drm/i915: Fix forcewake active domain tracking")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808210842.3555-1-chris@chris-wilson.co.uk
(cherry picked from commit d60996ab)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

An oddity occurs on Sandybridge, Ivybridge and Haswell (and presumably
Valleyview) in that for the period following the GPU restart after a
reset, there are no GT interrupts received. From Ville's notes, bit 0 in
the HWSTAM corresponds to the render interrupt, and if we unmask it we
do see immediate resumption of GT interrupt delivery (via the master irq
handler) after the reset.

v2: Limit the w/a to the render interrupt from rcs

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107500
Fixes: c5498089 ("drm/i915: Mask everything in ring HWSTAM on gen6+ in ringbuffer mode")
References: d420a50c ("drm/i915: Clean up the HWSTAM mess")
Testcase: igt/gem_eio/reset-stress
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180808105101.913-2-chris@chris-wilson.co.uk
(cherry picked from commit a4a717010f4e8cacaa3f0cae8a22f25c39ae1d41)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

The 'sparse' variable may leak when return in function
intel_vgpu_ioctl(), and this patch fix this.
Signed-off-by: NYi Wang <wang.yi59@zte.com.cn>
Reviewed-by: NJiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The > should be >= here so that we don't read one element beyond the
end of the array.

Fixes: 28a60dee ("drm/i915/gvt: vGPU HW resource management")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

info.index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/gpu/drm/i915/gvt/kvmgt.c:1232 intel_vgpu_ioctl() warn:
potential spectre issue 'vgpu->vdev.region' [r]

Fix this by sanitizing info.index before indirectly using it to index
vgpu->vdev.region

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

If a register is not cmd accessible, should not just print error
message. Return error here so as not to deliver this cmd.

v2: return -EBADRQC to align with return value elsewhere. (kevin tian)
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Currently, the mutex used in GVT dmabuf support is not initialized until
vgpu device is opened. If one vgpu device is opened and then removed, the
mutex will be used in vgpu remove operation without initialization. This
patch initializes the mutex in vgpu create operation to avoid the problem.

Fixes: e546e281("drm/i915/gvt: Dmabuf support for GVT-g")
Signed-off-by: NHang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Create one vGPU and then unbind IGD device from i915 driver. The following
oops will happen. This patch will free vgpu resource first and then gvt
resource to remove these oops.

BUG: unable to handle kernel NULL pointer dereference at       00000000000000a8
  PGD 80000003c9d2c067 P4D 80000003c9d2c067 PUD 3c817c067 P      MD 0
  Oops: 0002 [#1] SMP PTI
  RIP: 0010:down_write+0x1b/0x40
Call Trace:
  debugfs_remove_recursive+0x46/0x1a0
  intel_gvt_debugfs_remove_vgpu+0x15/0x30 [i915]
  intel_gvt_destroy_vgpu+0x2d/0xf0 [i915]
  intel_vgpu_remove+0x2c/0x30 [kvmgt]
  mdev_device_remove_ops+0x23/0x50 [mdev]
  mdev_device_remove+0xdb/0x190 [mdev]
  mdev_device_remove+0x190/0x190 [mdev]
  device_for_each_child+0x47/0x90
  mdev_unregister_device+0xd5/0x120 [mdev]
  intel_gvt_clean_device+0x91/0x120 [i915]
  i915_driver_unload+0x9d/0x120 [i915]
  i915_pci_remove+0x15/0x20 [i915]
  pci_device_remove+0x3b/0xc0
  device_release_driver_internal+0x157/0x230
  unbind_store+0xfc/0x150
  kernfs_fop_write+0x10f/0x180
  __vfs_write+0x36/0x180
  ? common_file_perm+0x41/0x130
  ? _cond_resched+0x16/0x40
  vfs_write+0xb3/0x1a0
  ksys_write+0x52/0xc0
  do_syscall_64+0x55/0x100
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: unable to handle kernel NULL pointer dereference at 0      000000000000038
  PGD 8000000405bce067 P4D 8000000405bce067 PUD 405bcd067 PM      D 0
  Oops: 0000 [#1] SMP PTI
  RIP: 0010:hrtimer_active+0x5/0x40
Call Trace:
  hrtimer_try_to_cancel+0x25/0x120
  ? tbs_sched_clean_vgpu+0x1f/0x50 [i915]
  hrtimer_cancel+0x15/0x20
  intel_gvt_destroy_vgpu+0x4c/0xf0 [i915]
  intel_vgpu_remove+0x2c/0x30 [kvmgt]
  mdev_device_remove_ops+0x23/0x50 [mdev]
  mdev_device_remove+0xdb/0x190 [mdev]
  ? mdev_device_remove+0x190/0x190 [mdev]
  device_for_each_child+0x47/0x90
  mdev_unregister_device+0xd5/0x120 [mdev]
  intel_gvt_clean_device+0x89/0x120 [i915]
  i915_driver_unload+0x9d/0x120 [i915]
  i915_pci_remove+0x15/0x20 [i915]
  pci_device_remove+0x3b/0xc0
  device_release_driver_internal+0x157/0x230
  unbind_store+0xfc/0x150
  kernfs_fop_write+0x10f/0x180
  __vfs_write+0x36/0x180
  ? common_file_perm+0x41/0x130
  ? _cond_resched+0x16/0x40
  vfs_write+0xb3/0x1a0
  ksys_write+0x52/0xc0
  do_syscall_64+0x55/0x100
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: bc7b0be3("drm/i915/gvt: Add basic debugfs infrastructure")
Fixes: afe04fbe("drm/i915/gvt: create an idle vGPU")
Signed-off-by: NHang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

[Why]

A null pointer deference can occur if crtc is null in
amdgpu_dm_crtc_handle_crc_irq. This can happen if get_crtc_by_otg_inst
returns NULL during dm_crtc_high_irq, leading to a hang in some IGT
test cases.

[How]

Check that CRTC is non-null before accessing its fields.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Older ASICs require both phys_id and connector_id
to execute bios command table. If we are not passing the
right connector_id - it can lead to a black screen.

[how]
Set connector_obj_id when executing vbios command table
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[why]
We are disabling clock source while other pipes are still using
it, because we don't verify the number of pipes that share it.

[how]
- Adding a function in resources to return the number of pipes
sharing the clock source.
- Checking that no one is sharing the clock source before disabling
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[why]
HDMI and DVI share the same PHY clock and single link
DVI and HDMI both use 4 lanes, so they should be allowed
to be sharing the same clock source if all other parameters
are satisfied.

[how]
Change a check for general DVI to Dual DVI.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DOUBLE_BUFFER_EN bit is getting cleared before enable blanking.
That leads to CRTC_BLANK_DATA_EN is getting updated immediately.

[How]
Get DOUBLE_BUFFER_EN bit set, the same as DCE110.
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Entity init should after ring init, as the entity's sched_rq's initialization
is in ring init.

SWDEV-161495
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Entity init should after ring init, as the entity's sched_rq's initialization
is in ring init.

SWDEV-161495
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Setup psp firmware loading for VCN, and make VCN block
booting from tmr mac address.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add VCN support in PSP driver
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add the new firmware id for VCN into the enum
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Update tmr mc address with firmware loading address
which is returned from PSP firmware
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

amdgpu IP blocks booting need Trust Memory Region(tmr) mc address
of its firmware which is loaded by PSP
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NLikun Gao <likun.gao@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some workloads may be prepared in vgpu's queue but not be scheduled
to run yet. If vgpu is released at this time, they will not be freed
in workload complete callback and so need to be freed in vgpu release
operation.

Add new vgpu_release operation in gvt_ops to stop vgpu and release
runtime resources. gvt_ops vgpu_deactivate operation will only stop
vgpu.

v2: add new gvt ops to clean vgpu running status (Xiong Zhang)
Signed-off-by: NHang Yuan <hang.yuan@linux.intel.com>
Reviewed-by: NXiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This change validates the physical encoder before it
is dereferenced.
Signed-off-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Extend the timeout for recovering vram bos from shadows on sr-iov
to cover the worst case scenario for timeslices and VFs

Under runtime, the wait fence time could be quite long when
other VFs are in exclusive mode. For example, for 4 VF, every
VF's exclusive timeout time is set to 3s, then the worst case is
9s. If the VF number is more than 4,then the worst case time will
be longer.
The 8s is the test data, with setting to 8s, it will pass the TDR
test for 1000 times.

SWDEV-161490
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We no longer have sched parameter so remove its description
as well
Signed-off-by: NNayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The serializer PLL divider is a power-of-two divider, so our calculation
which assumes that it's a numerical divider is incorrect.  Replace it
with one that results in a power-of-two divider value instead.

Tested with all supported modes with a Samsung S24C750.
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

We can achieve the same effect via the get_modes() method, rather than
wrapping the fill_modes helper.
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Move the mode_valid() implementation to the bridge instead of the
connector, as we're checking the bridge's capabilities.
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Register the bridge outside of the component helper as we have
drivers that wish to use the tda998x without its encoder.
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Cleanup the code a little from the effects of the previous changes:
- Move tda998x_destroy() to be above tda998x_create()
- Use 'dev' directly in tda998x_create() where appropriate.
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Move the tda998x_priv allocation inside tda998x_create() and simplify
the tda998x_create()'s arguments.  Pass the same to tda998x_destroy().
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Convert tda998x to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Tested-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

The dma_mapping_error() returns true on error but we want to return
-ENOMEM here.

Fixes: 79e542f5 ("drm/i915/kvmgt: Support setting dma map for huge pages")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

drm_sched_job_finish() is a work item scheduled for each finished job on
a unbound system workqueue. This means the workers can execute out of order
with regard to the real hardware job completions.

If this happens queueing a timeout worker for the first job on the ring
mirror list is wrong, as this may be a job which has already finished
executing. Fix this by reorganizing the code to always queue the worker
for the next job on the list, if this job hasn't finished yet. This is
robust against a potential reordering of the finish workers.

Also move out the timeout worker cancelling, so that we don't need to
take the job list lock twice. As a small optimization list_del is used
to remove the job from the ring mirror list, as there is no need to
reinit the list head in the job we are about to free.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
for vega, dp set_panel_mode is
handled by psp firmware. dal should not program the
register again.

[how]
dal does not program panel mode.
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
When programming tonga's connector's backend we didn't take
in account that HDMI's colour depth might be more than 8bpc
therefore we need to add a switch statement that would adjust
the pixel clock accordingly.

[how]
Add a switch statement updating clock by its appropriate
coefficient.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
We seem to have an issue where high enough display clock
will not get set properly during S3 resume if we only
call vbios once

[How]
Expand condition of display clock programming to happen
even when cached display clock matches requested display
clock
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>