Remove the unused #define
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch changes the syscall handler to doom (tabort) active
transactions when a syscall is made and return very early without
performing the syscall and keeping side effects to a minimum (no CPU
accounting or system call tracing is performed). Also included is a
new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
behaviour to userspace.

Currently, the system call instruction automatically suspends an
active transaction which causes side effects to persist when an active
transaction fails.

This does change the kernel's behaviour, but in a way that was
documented as unsupported.  It doesn't reduce functionality as
syscalls will still be performed after tsuspend; it just requires that
the transaction be explicitly suspended.  It also provides a
consistent interface and makes the behaviour of user code
substantially the same across powerpc and platforms that do not
support suspended transactions (e.g. x86 and s390).

Performance measurements using
http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
a normal (non-aborted) system call increases by about 0.25%.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pnv_pci_ioda2_unset_window() function is used to do the final
cleanup of a DMA window being released:
- via VFIO ioctl by the guest request;
- via unplugging a virtual PCI function.
However the function was under #ifdef CONFIG_IOMMU_API and was missing.

This moves the helper outside of IOMMU_API block and enables it
for either or both IOMMU_API and PCI_IOV.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We'll want to build the opal-prd daemon with the prd headers, so include
this in the uapi headers list.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We currently have a bug in the PRD code, where the contents of an
incoming message (beyond the header) will be overwritten by the list
item manipulations when adding to to the prd_msg_queue.

This change reorders struct opal_prd_msg_queue_item, so that the
message body doesn't overlap the list_head.

We also clarify the memcpy of the message, as we're copying unnecessary
bytes at the end of the message data.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The eeh subsystem for powernv requires the opal event irqchip to be
initialised prior to initialisation or the following errors are
produced (and eeh doesn't work as expected):

irq: XICS didn't like hwirq-0x9 to VIRQ17 mapping (rc=-22)
pnv_eeh_post_init: Can't request OPAL event interrupt (0)

On powernv eeh is initialised from a subsys_initcall due to a check
for machine_is(powernv) in eeh_init(). This patch increases the
initcall priority of opal_event_init() to an arch_initcall to ensure
the opal event interface is initialised prior to any users of it.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Reported-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Doorbell can be used to cause ipi on cpus which are sibling threads on
the same core. So icp_native_cause_ipi checks if the destination cpu
is a sibling thread of the current cpu and uses doorbell in such cases.

But while running with CONFIG_PREEMPT=y, since this section is
preemtible, we can run into issues if after we check if the destination
cpu is a sibling cpu, the task gets migrated from a sibling cpu to a
cpu on another core.

Fix this by using get_cpu()/ put_cpu()
Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Although this init call checks for device tree properties before doing
anything, it should still only run on powernv machines.
Reviewed-by: NShreyas B Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The full history Linux tree says it was moved:

  commit 17c6f4635bea74e110ab3558d408c9cd218c568a
  Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
  Date:   Fri Feb 6 14:20:56 2004 +1100

      ppc32: Rework nvram management

      move drivers/macintosh/nvram.c to drivers/char/generic_nvram.c,
      update platform hooks,
      fix powermac nvram driver for newer machines

But it's still there, and not buildable, so remove it.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We have code to choose between several options, eg. -mabi=elfv2 vs
-mcall-aixdesc, and -mcmodel=medium vs -mminimal-toc. But these are all
GCC specific, so use cc-option on all of them.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We added -mno-strict-align in commit f036b368 (powerpc: Work around little
endian gcc bug) to fix gcc bug http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57134

Clang doesn't understand it. We need to use a conditional because we can't use the
simpler call cc-option here.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These options are not recognised on LLVM, so use call cc-option to check
for support.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The -mabi=altivec option is not recognised on LLVM, so use call cc-option
to check for support.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We see a large number of duplicate const errors in the user access
code when building with llvm/clang:

  include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier
      [-Wduplicate-decl-specifier]
        ret = __get_user(c, uaddr);

The problem is we are doing const __typeof__(*(ptr)), which will hit the
warning if ptr is marked const.

Removing const does not seem to have any effect on GCC code generation.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds create/remove window ioctls to create and remove DMA windows.
sPAPR defines a Dynamic DMA windows capability which allows
para-virtualized guests to create additional DMA windows on a PCI bus.
The existing linux kernels use this new window to map the entire guest
memory and switch to the direct DMA operations saving time on map/unmap
requests which would normally happen in a big amounts.

This adds 2 ioctl handlers - VFIO_IOMMU_SPAPR_TCE_CREATE and
VFIO_IOMMU_SPAPR_TCE_REMOVE - to create and remove windows.
Up to 2 windows are supported now by the hardware and by this driver.

This changes VFIO_IOMMU_SPAPR_TCE_GET_INFO handler to return additional
information such as a number of supported windows and maximum number
levels of TCE tables.

DDW is added as a capability, not as a SPAPR TCE IOMMU v2 unique feature
as we still want to support v2 on platforms which cannot do DDW for
the sake of TCE acceleration in KVM (coming soon).
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The existing implementation accounts the whole DMA window in
the locked_vm counter. This is going to be worse with multiple
containers and huge DMA windows. Also, real-time accounting would requite
additional tracking of accounted pages due to the page size difference -
IOMMU uses 4K pages and system uses 4K or 64K pages.

Another issue is that actual pages pinning/unpinning happens on every
DMA map/unmap request. This does not affect the performance much now as
we spend way too much time now on switching context between
guest/userspace/host but this will start to matter when we add in-kernel
DMA map/unmap acceleration.

This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU.
New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces
2 new ioctls to register/unregister DMA memory -
VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY -
which receive user space address and size of a memory region which
needs to be pinned/unpinned and counted in locked_vm.
New IOMMU splits physical pages pinning and TCE table update
into 2 different operations. It requires:
1) guest pages to be registered first
2) consequent map/unmap requests to work only with pre-registered memory.
For the default single window case this means that the entire guest
(instead of 2GB) needs to be pinned before using VFIO.
When a huge DMA window is added, no additional pinning will be
required, otherwise it would be guest RAM + 2GB.

The new memory registration ioctls are not supported by
VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration
will require memory to be preregistered in order to work.

The accounting is done per the user process.

This advertises v2 SPAPR TCE IOMMU and restricts what the userspace
can do with v1 or v2 IOMMUs.

In order to support memory pre-registration, we need a way to track
the use of every registered memory region and only allow unregistration
if a region is not in use anymore. So we need a way to tell from what
region the just cleared TCE was from.

This adds a userspace view of the TCE table into iommu_table struct.
It contains userspace address, one per TCE entry. The table is only
allocated when the ownership over an IOMMU group is taken which means
it is only used from outside of the powernv code (such as VFIO).

As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support
DDW API), this creates a default DMA window for IODA2 for consistency.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We are adding support for DMA memory pre-registration to be used in
conjunction with VFIO. The idea is that the userspace which is going to
run a guest may want to pre-register a user space memory region so
it all gets pinned once and never goes away. Having this done,
a hypervisor will not have to pin/unpin pages on every DMA map/unmap
request. This is going to help with multiple pinning of the same memory.

Another use of it is in-kernel real mode (mmu off) acceleration of
DMA requests where real time translation of guest physical to host
physical addresses is non-trivial and may fail as linux ptes may be
temporarily invalid. Also, having cached host physical addresses
(compared to just pinning at the start and then walking the page table
again on every H_PUT_TCE), we can be sure that the addresses which we put
into TCE table are the ones we already pinned.

This adds a list of memory regions to mm_context_t. Each region consists
of a header and a list of physical addresses. This adds API to:
1. register/unregister memory regions;
2. do final cleanup (which puts all pre-registered pages);
3. do userspace to physical address translation;
4. manage usage counters; multiple registration of the same memory
is allowed (once per container).

This implements 2 counters per registered memory region:
- @mapped: incremented on every DMA mapping; decremented on unmapping;
initialized to 1 when a region is just registered; once it becomes zero,
no more mappings allowe;
- @used: incremented on every "register" ioctl; decremented on
"unregister"; unregistration is allowed for DMA mapped regions unless
it is the very last reference. For the very last reference this checks
that the region is still mapped and returns -EBUSY so the userspace
gets to know that memory is still pinned and unregistration needs to
be retried; @used remains 1.

Host physical addresses are stored in vmalloc'ed array. In order to
access these in the real mode (mmu off), there is a real_vmalloc_addr()
helper. In-kernel acceleration patchset will move it from KVM to MMU code.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Before the IOMMU user (VFIO) would take control over the IOMMU table
belonging to a specific IOMMU group. This approach did not allow sharing
tables between IOMMU groups attached to the same container.

This introduces a new IOMMU ownership flavour when the user can not
just control the existing IOMMU table but remove/create tables on demand.
If an IOMMU implements take/release_ownership() callbacks, this lets
the user have full control over the IOMMU group. When the ownership
is taken, the platform code removes all the windows so the caller must
create them.
Before returning the ownership back to the platform code, VFIO
unprograms and removes all the tables it created.

This changes IODA2's onwership handler to remove the existing table
rather than manipulating with the existing one. From now on,
iommu_take_ownership() and iommu_release_ownership() are only called
from the vfio_iommu_spapr_tce driver.

Old-style ownership is still supported allowing VFIO to run on older
P5IOC2 and IODA IO controllers.

No change in userspace-visible behaviour is expected. Since it recreates
TCE tables on each ownership change, related kernel traces will appear
more often.

This adds a pnv_pci_ioda2_setup_default_config() which is called
when PE is being configured at boot time and when the ownership is
passed from VFIO to the platform code.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds a way for the IOMMU user to know how much a new table will
use so it can be accounted in the locked_vm limit before allocation
happens.

This stores the allocated table size in pnv_pci_ioda2_get_table_size()
so the locked_vm counter can be updated correctly when a table is
being disposed.

This defines an iommu_table_group_ops callback to let VFIO know
how much memory will be locked if a table is created.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The existing code programmed TVT#0 with some address and then
immediately released that memory.

This makes use of pnv_pci_ioda2_unset_window() and
pnv_pci_ioda2_set_bypass() which do correct resource release and
TVT update.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This extends iommu_table_group_ops by a set of callbacks to support
dynamic DMA windows management.

create_table() creates a TCE table with specific parameters.
it receives iommu_table_group to know nodeid in order to allocate
TCE table memory closer to the PHB. The exact format of allocated
multi-level table might be also specific to the PHB model (not
the case now though).
This callback calculated the DMA window offset on a PCI bus from @num
and stores it in a just created table.

set_window() sets the window at specified TVT index + @num on PHB.

unset_window() unsets the window from specified TVT.

This adds a free() callback to iommu_table_ops to free the memory
(potentially a tree of tables) allocated for the TCE table.

create_table() and free() are supposed to be called once per
VFIO container and set_window()/unset_window() are supposed to be
called for every group in a container.

This adds IOMMU capabilities to iommu_table_group such as default
32bit window parameters and others. This makes use of new values in
vfio_iommu_spapr_tce. IODA1/P5IOC2 do not support DDW so they do not
advertise pagemasks to the userspace.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

TCE tables might get too big in case of 4K IOMMU pages and DDW enabled
on huge guests (hundreds of GB of RAM) so the kernel might be unable to
allocate contiguous chunk of physical memory to store the TCE table.

To address this, POWER8 CPU (actually, IODA2) supports multi-level
TCE tables, up to 5 levels which splits the table into a tree of
smaller subtables.

This adds multi-level TCE tables support to
pnv_pci_ioda2_table_alloc_pages() and pnv_pci_ioda2_table_free_pages()
helpers.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is a part of moving DMA window programming to an iommu_ops
callback. pnv_pci_ioda2_set_window() takes an iommu_table_group as
a first parameter (not pnv_ioda_pe) as it is going to be used as
a callback for VFIO DDW code.

This should cause no behavioural change.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is a part of moving TCE table allocation into an iommu_ops
callback to support multiple IOMMU groups per one VFIO container.

This moves the code which allocates the actual TCE tables to helpers:
pnv_pci_ioda2_table_alloc_pages() and pnv_pci_ioda2_table_free_pages().
These do not allocate/free the iommu_table struct.

This enforces window size to be a power of two.

This should cause no behavioural change.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves iommu_table creation to the beginning to make following changes
easier to review. This starts using table parameters from the iommu_table
struct.

This should cause no behavioural change.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

At the moment writing new TCE value to the IOMMU table fails with EBUSY
if there is a valid entry already. However PAPR specification allows
the guest to write new TCE value without clearing it first.

Another problem this patch is addressing is the use of pool locks for
external IOMMU users such as VFIO. The pool locks are to protect
DMA page allocator rather than entries and since the host kernel does
not control what pages are in use, there is no point in pool locks and
exchange()+put_page(oldtce) is sufficient to avoid possible races.

This adds an exchange() callback to iommu_table_ops which does the same
thing as set() plus it returns replaced TCE and DMA direction so
the caller can release the pages afterwards. The exchange() receives
a physical address unlike set() which receives linear mapping address;
and returns a physical address as the clear() does.

This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement
for a platform to have exchange() implemented in order to support VFIO.

This replaces iommu_tce_build() and iommu_clear_tce() with
a single iommu_tce_xchg().

This makes sure that TCE permission bits are not set in TCE passed to
IOMMU API as those are to be calculated by platform code from
DMA direction.

This moves SetPageDirty() to the IOMMU code to make it work for both
VFIO ioctl interface in in-kernel TCE acceleration (when it becomes
available later).
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This replaces direct accesses to TCE table with a helper which
returns an TCE entry address. This does not make difference now but will
when multi-level TCE tables get introduces.

No change in behavior is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The iommu_table struct keeps a list of IOMMU groups it is used for.
At the moment there is just a single group attached but further
patches will add TCE table sharing. When sharing is enabled, TCE cache
in each PE needs to be invalidated so does the patch.

This does not change pnv_pci_ioda1_tce_invalidate() as there is no plan
to enable TCE table sharing on PHBs older than IODA2.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

At the moment the DMA setup code looks for the "ibm,opal-tce-kill"
property which contains the TCE kill register address. Writing to
this register invalidates TCE cache on IODA/IODA2 hub.

This moves the register address from iommu_table to pnv_pnb as this
register belongs to PHB and invalidates TCE cache for all tables of
all attached PEs.

This moves the property reading/remapping code to a helper which is
called when DMA is being configured for PE and which does DMA setup
for both IODA1 and IODA2.

This adds a new pnv_pci_ioda2_tce_invalidate_entire() helper which
invalidates cache for the entire table. It should be called after
every call to opal_pci_map_pe_dma_window(). It was not required before
because there was just a single TCE table and 64bit DMA was handled via
bypass window (which has no table so no cache was used) but this is going
to change with Dynamic DMA windows (DDW).
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds missing locks in iommu_take_ownership()/
iommu_release_ownership().

This marks all pages busy in iommu_table::it_map in order to catch
errors if there is an attempt to use this table while ownership over it
is taken.

This only clears TCE content if there is no page marked busy in it_map.
Clearing must be done outside of the table locks as iommu_clear_tce()
called from iommu_clear_tces_and_put_pages() does this.

In order to use bitmap_empty(), the existing code clears bit#0 which
is set even in an empty table if it is bus-mapped at 0 as
iommu_init_table() reserves page#0 to prevent buggy drivers
from crashing when allocated page is bus-mapped at zero
(which is correct). This restores the bit in the case of failure
to bring the it_map to the state it was in when we called
iommu_take_ownership().
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds tce_iommu_take_ownership() and tce_iommu_release_ownership
which call in a loop iommu_take_ownership()/iommu_release_ownership()
for every table on the group. As there is just one now, no change in
behaviour is expected.

At the moment the iommu_table struct has a set_bypass() which enables/
disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code
which calls this callback when external IOMMU users such as VFIO are
about to get over a PHB.

The set_bypass() callback is not really an iommu_table function but
IOMMU/PE function. This introduces a iommu_table_group_ops struct and
adds take_ownership()/release_ownership() callbacks to it which are
called when an external user takes/releases control over the IOMMU.

This replaces set_bypass() with ownership callbacks as it is not
necessarily just bypass enabling, it can be something else/more
so let's give it more generic name.

The callbacks is implemented for IODA2 only. Other platforms (P5IOC2,
IODA1) will use the old iommu_take_ownership/iommu_release_ownership API.
The following patches will replace iommu_take_ownership/
iommu_release_ownership calls in IODA2 with full IOMMU table release/
create.

As we here and touching bypass control, this removes
pnv_pci_ioda2_setup_bypass_pe() as it does not do much
more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base
initialization to pnv_pci_ioda2_setup_dma_pe.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

So far one TCE table could only be used by one IOMMU group. However
IODA2 hardware allows programming the same TCE table address to
multiple PE allowing sharing tables.

This replaces a single pointer to a group in a iommu_table struct
with a linked list of groups which provides the way of invalidating
TCE cache for every PE when an actual TCE table is updated. This adds
pnv_pci_link_table_and_group() and pnv_pci_unlink_table_and_group()
helpers to manage the list. However without VFIO, it is still going
to be a single IOMMU group per iommu_table.

This changes iommu_add_device() to add a device to a first group
from the group list of a table as it is only called from the platform
init code or PCI bus notifier and at these moments there is only
one group per table.

This does not change TCE invalidation code to loop through all
attached groups in order to simplify this patch and because
it is not really needed in most cases. IODA2 is fixed in a later
patch.

This should cause no behavioural change.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Modern IBM POWERPC systems support multiple (currently two) TCE tables
per IOMMU group (a.k.a. PE). This adds a iommu_table_group container
for TCE tables. Right now just one table is supported.

This defines iommu_table_group struct which stores pointers to
iommu_group and iommu_table(s). This replaces iommu_table with
iommu_table_group where iommu_table was used to identify a group:
- iommu_register_group();
- iommudata of generic iommu_group;

This removes @data from iommu_table as it_table_group provides
same access to pnv_ioda_pe.

For IODA, instead of embedding iommu_table, the new iommu_table_group
keeps pointers to those. The iommu_table structs are allocated
dynamically.

For P5IOC2, both iommu_table_group and iommu_table are embedded into
PE struct. As there is no EEH and SRIOV support for P5IOC2,
iommu_free_table() should not be called on iommu_table struct pointers
so we can keep it embedded in pnv_phb::p5ioc2.

For pSeries, this replaces multiple calls of kzalloc_node() with a new
iommu_pseries_alloc_group() helper and stores the table group struct
pointer into the pci_dn struct. For release, a iommu_table_free_group()
helper is added.

This moves iommu_table struct allocation from SR-IOV code to
the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and
pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized.
This change is here because those lines had to be changed anyway.

This should cause no behavioural change.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pnv_pci_ioda_tce_invalidate() helper invalidates TCE cache. It is
supposed to be called on IODA1/2 and not called on p5ioc2. It receives
start and end host addresses of TCE table.

IODA2 actually needs PCI addresses to invalidate the cache. Those
can be calculated from host addresses but since we are going
to implement multi-level TCE tables, calculating PCI address from
a host address might get either tricky or ugly as TCE table remains flat
on PCI bus but not in RAM.

This moves pnv_pci_ioda_tce_invalidate() from generic pnv_tce_build/
pnt_tce_free and defines IODA1/2-specific callbacks which call generic
ones and do PHB-model-specific TCE cache invalidation. P5IOC2 keeps
using generic callbacks as before.

This changes pnv_pci_ioda2_tce_invalidate() to receives TCE index and
number of pages which are PCI addresses shifted by IOMMU page shift.

No change in behaviour is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds a iommu_table_ops struct and puts pointer to it into
the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush
callbacks from ppc_md to the new struct where they really belong to.

This adds the requirement for @it_ops to be initialized before calling
iommu_init_table() to make sure that we do not leave any IOMMU table
with iommu_table_ops uninitialized. This is not a parameter of
iommu_init_table() though as there will be cases when iommu_init_table()
will not be called on TCE tables, for example - VFIO.

This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_"
redundant prefixes.

This removes tce_xxx_rm handlers from ppc_md but does not add
them to iommu_table_ops as this will be done later if we decide to
support TCE hypercalls in real mode. This removes _vm callbacks as
only virtual mode is supported by now so this also removes @rm parameter.

For pSeries, this always uses tce_buildmulti_pSeriesLP/
tce_buildmulti_pSeriesLP. This changes multi callback to fall back to
tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not
present. The reason for this is we still have to support "multitce=off"
boot parameter in disable_multitce() and we do not want to walk through
all IOMMU tables in the system and replace "multi" callbacks with single
ones.

For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2.
This makes the callbacks for them public. Later patches will extend
callbacks for IODA1/2.

No change in behaviour is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Normally a bitmap from the iommu_table is used to track what TCE entry
is in use. Since we are going to use iommu_table without its locks and
do xchg() instead, it becomes essential not to put bits which are not
implied in the direction flag as the old TCE value (more precisely -
the permission bits) will be used to decide whether to put the page or not.

This adds iommu_direction_to_tce_perm() (its counterpart is there already)
and uses it for powernv's pnv_tce_build().
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is to make extended ownership and multiple groups support patches
simpler for review.

This should cause no behavioural change.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is a pretty mechanical patch to make next patches simpler.

New tce_iommu_unuse_page() helper does put_page() now but it might skip
that after the memory registering patch applied.

As we are here, this removes unnecessary checks for a value returned
by pfn_to_page() as it cannot possibly return NULL.

This moves tce_iommu_disable() later to let tce_iommu_clear() know if
the container has been enabled because if it has not been, then
put_page() must not be called on TCEs from the TCE table. This situation
is not yet possible but it will after KVM acceleration patchset is
applied.

This changes code to work with physical addresses rather than linear
mapping addresses for better code readability. Following patches will
add an xchg() callback for an IOMMU table which will accept/return
physical addresses (unlike current tce_build()) which will eliminate
redundant conversions.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

At the moment DMA map/unmap requests are handled irrespective to
the container's state. This allows the user space to pin memory which
it might not be allowed to pin.

This adds checks to MAP/UNMAP that the container is enabled, otherwise
-EPERM is returned.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There moves locked pages accounting to helpers.
Later they will be reused for Dynamic DMA windows (DDW).

This reworks debug messages to show the current value and the limit.

This stores the locked pages number in the container so when unlocking
the iommu table pointer won't be needed. This does not have an effect
now but it will with the multiple tables per container as then we will
allow attaching/detaching groups on fly and we may end up having
a container with no group attached but with the counter incremented.

While we are here, update the comment explaining why RLIMIT_MEMLOCK
might be required to be bigger than the guest RAM. This also prints
pid of the current process in pr_warn/pr_debug.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>