This driver features:

* Alarm support.
* Periodic interrupt by using a timer include into the RTC module.
* The update interrupt is not supported by this RTC module.

This driver was tested on a DM365 EVM by using the rtc-test application
from the Documentation/rtc.txt.
Signed-off-by: NMiguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>

MAX8925 is a PMIC that contains RTC component.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add support for MPC5121 real time clock module.
Signed-off-by: NJohn Rigby <jcrigby@gmail.com>
Signed-off-by: NPiotr Ziecik <kosmo@semihalf.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Hu Ruihuan <specter118@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "jack wang" <jack_wang@usish.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds basic support for Texas Instruments BQ32000 I2C RTC.  Only
time reading/writing is implemented.  Advanced features, such as trickle
charger and crystal calibration are not supported.
Signed-off-by: NPiotr Ziecik <kosmo@semihalf.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The rtc-omap driver currently assumes that the rtc's registers are at a
fixed address and already mapped into virtual memory space.  Remove those
assumptions so the same driver can be used for similar devices that reside
at different physical addresses (e.g., TI's DA8xx/OMAP-L13x SoC's).

Also allow the possibility for the timer and alarm interrupts to use the
same IRQ.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NKevin Hilman <khilman@deeprootsystems.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver provides support for the RTC part integrated into the
Freescale MC13783 PMIC and bases on patch created earlier by Sascha
Hauer.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NValentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for RTC in phoenix TWL6030.
Register offset addresses have changed in TWL6030
rtc-twl.c will hence forth support all twl RTC (4030, 5030, 6030 ..)
Signed-off-by: NBalaji T K <balajitk@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it>

Signed-off-by: NSaeed Bishara <saeed@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

[ospite@studenti.unina.it: get pcap data from the parent device]
Signed-off-by: Nguiming zhuo <gmzhuo@gmail.com>
Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for RTC on the Freescale STMP37xx/378x platform.
Signed-off-by: Ndmitry pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a driver for the RTC COH 901 331 found in the ST-Ericsson U300
series mobile platforms to the RTC subsystem.  It integrates to the ARM
kernel support recently added to RMKs ARM tree and will be enabled in the
U300 defconfig in due time.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a driver for Freescale's MXC internal real time clock modules.

The code is taken from Freescale's BSPs, but modified to fit the current
kernel coding mechanisms.  Also, the PMIC external clock function was
removed for now to not add dead bits and keep the code as simple as
possible.

[akpm@linux-foundation.org: make PIE_BIT_DEF[] static]
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the Philips/NXP PCF2123 RTC.

Signed-off: Chris Verges <chrisv@cyberswitching.com>
Tested-by: NChris Verges <chrisv@cyberswitching.com>
Signed-off: Christian Pellegrin <chripell@fsfe.org>
Tested-by: NChristian Pellegrin <chripell@fsfe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for the RTC found inside the AB3100 Mixed Signal chip.
The symbols used for communicating with the chip is found in the
mfd/ab3100-core.c driver that also provides the platform device.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The WM831x series of PMICs contain RTC functionality. The hardware
provides a 32 bit counter incrementing at 1Hz together with a per
tick interrupt and an alarm value. For simplicity the driver chooses
to define the epoch for the counter as the Unix epoch - if required
platform data can be used in future to customise this.

When powered on from a completely cold state the RTC reports that it
has not been configured - when this happens an error is returned
when attempting to read the RTC in order to avoid use of values we
know to be invalid.

The hardware also provides security features which mean that it can
ignore attempts to set the RTC time in certain circumstances, most
notably if the RTC is written to too often. These errors are detected
by verifying the written RTC value.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add support for the Epson RX-8025SA/NB RTC chips.  It includes support for
alarms, periodic interrupts (1 Hz) and clock precision adjustment.

For clock precision adjustment, the SYSFS file "clock_adjust_ppb" gets
created in "/sys/class/rtc/rtcX/device".  It permits to set and get the
clock adjustment in ppb (parts per billion), e.g.:

  # echo -183000 > /sys/class/rtc/rtc0/device/clock_adjust_ppb
  # cat /sys/class/rtc/rtc0/device/clock_adjust_ppb
  -183000

This allows to compensate temperature dependent clock drifts.  According
to the RX8025 SA/NB application manual the frequency and temperature
characteristics can be approximated using the following equation:

  df = a * (ut - t)**2

  df: Frequency deviation in any temperature
  a : Coefficient = (-35 +-5) * 10**-9
  ut: Ultimate temperature in degree = +25 +-5 degree
  t : Any temperature in degree
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Signed-off-by: NDmitry Rakhchev <rda@emcraft.com>
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds rtc-generic support for SUPERH32.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds clock framework support to the rtc-sh driver. With this in
place, platforms can default to leaving the clock disabled rather than
placing it in the always enabled state.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Compared to the other supported chips, the m41t62 uses a different
register to set the square wave frequency.
Signed-off-by: NDaniel Glockner <dg@emlix.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create a real RTC driver for PS3, and unhook the deprecated
ppc_md.[gs]et_rtc_time.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

PowerPC has been a long time user of the generic RTC abstraction, so hook up
rtc-generic:
  - Create the "rtc-generic" platform device if ppc_md.get_rtc_time is set,
  - Kill rtc-ppc, as rtc-generic offers the same functionality in a more
    generic way, and supports autoloading through udev.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

m68k has been a long time user of the generic RTC abstraction, so hook up
rtc-generic:
  - Create the "rtc-generic" platform device if mach_hwclk is set,
  - Add checks for mach_hwclk, in anticipation of RTC chip drivers being moved
    to drivers/rtc/.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

The rtc-parisc driver is not PA-RISC specific at all, as it uses the existing
(but deprecated) generic RTC infrastructure ([gs]et_rtc_time()).
Rename the driver from rtc-parisc to rtc-generic.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Add support for the EPSON RX8025 RTC.  The date/time registers of this
chip are compatible with the DS1307.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Munge Stephane Eranian's efirtc.c code into an rtc platform driver

[akpm@linux-foundation.org: use is_leap_year()]
Signed-off-by: Ndann frazier <dannf@hp.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: stephane eranian <eranian@googlemail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simple RTC driver for the MSP430 firmware on the DM355 EVM board.  Other
than not supporting atomic reads/writes of all four bytes, this is
reasonable as a basic no-alarm RTC.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NBalaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

Driver for the on-chip RTC found in some of Marvell's SoCs such as the
Kirkwood 88F6281 and 88F6192 devices.
Signed-off-by: NSaeed Bishara <saeed@marvell.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for RTC in TX4939 SoC.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simple driver which uses the Au1xxx Time-Of-Year counter (counter0)
as a 1Hz RTC.

[akpm@linux-foundation.org: repair Kconfig]
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove double spaces and adds some suggestions.  It also fixes the
descriptions of options that are no more available as modules.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Small fixes for the ds1390 driver

 - fixed initialization of the spi device
 - added missing includes
 - removed printks
 - removed useless wrappers for rtc ops
 - removed dead code
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Mark Jackson <mpfj@mimc.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With PXA27x and above, a new RTC hardware block was added in addition to
the legacy one which is also found on the SA1100 SOC family.  This second
RTC block is called "wristwatch" and "periodic interrupt" and works
independently from the other RTC block.

The driver offers provides :
 - a 1Hz ticking clock
 - a periodic alarm, in the 1Hz to 1000Hz range
 - a one shot alarm
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add standard interfaces for alarm/update irqs enabling.  Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.

UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the Dallas DS1390/93/94 SPI RTC chip.
Signed-off-by: NMark Jackson <mpfj@mimc.co.uk>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C
RTC.  It currently does not support the RTC's Alarm or Fixed-cycle timer.

[akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation]
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for the RTC provided by the Wolfson Microelectronics
WM8350.

This driver was originally written by Graeme Gregory and Liam Girdwood,
though it has been modified since then to update it to current mainline
coding standards and for API completeness.

[akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()]
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Liam Girdwood <linux@wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>