In the extremely unlikely event that driver initialization fails after
RX buffers are added, virtio net frees RX buffers while VQs are
still active, potentially causing device to use a freed buffer.

To fix, reset device first - same as we do on device removal.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, but virtio 9p device
adds self to channel list within probe, at which point VQ can be
used in violation of the spec.

To fix, call virtio_device_ready before using VQs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, virtio console violated this
rule by adding inbufs, which causes the VQ to be used directly within
probe.

To fix, call virtio_device_ready before using VQs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, virtio block violated this
rule by calling add_disk, which causes the VQ to be used directly within
probe.

To fix, call virtio_device_ready before using VQs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, virtio net violated this
rule by using receive VQs within probe.

To fix, call virtio_device_ready before using VQs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio spec 0.9.X requires DRIVER_OK to be set before
VQs are used, but some drivers use VQs before probe
function returns.
Since DRIVER_OK is set after probe, this violates the spec.

Even though under virtio 1.0 transitional devices support this
behaviour, we want to make it possible for those early callers to become
spec compliant and eventually support non-transitional devices.

Add API for drivers to call before using VQs.

Sets DRIVER_OK internally.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

	goto done;
done:
	return;
is ugly, it was put there to make diff review easier.
replace by open-coded return.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

config_mutex served two purposes: prevent multiple concurrent config
change handlers, and synchronize access to config_enable flag.

Since commit dbf2576e
    workqueue: make all workqueues non-reentrant
all workqueues are non-reentrant, and config_enable
is now gone.

Get rid of the unnecessary lock.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Now that virtio core ensures config changes don't arrive during probing,
drop config_enable flag in virtio net.
On removal, flush is now sufficient to guarantee that no change work is
queued.

This help simplify the driver, and will allow setting DRIVER_OK earlier
without losing config change notifications.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

config_mutex served two purposes: prevent multiple concurrent config
change handlers, and synchronize access to config_enable flag.

Since commit dbf2576e
    workqueue: make all workqueues non-reentrant
all workqueues are non-reentrant, and config_enable
is now gone.

Get rid of the unnecessary lock.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Now that virtio core ensures config changes don't
arrive during probing, drop config_enable flag
in virtio blk.
On removal, flush is now sufficient to guarantee that
no change work is queued.

This help simplify the driver, and will allow
setting DRIVER_OK earlier without losing config
change notifications.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Defer config changed notifications that arrive during
probe/scan/freeze/restore.

This will allow drivers to set DRIVER_OK earlier, without worrying about
racing with config change interrupts.

This change will also benefit old hypervisors (before 2009)
that send interrupts without checking DRIVER_OK: previously,
the callback could race with driver-specific initialization.

This will also help simplify drivers.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cosmetic changes)

This is in preparation to extending config changed event handling
in core.
Wrapping these in an API also seems to make for a cleaner code.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Replace duplicated code in all transports with a single wrapper in
virtio.c.

The only functional change is in virtio_mmio.c: if a buggy device sends
us an interrupt before driver is set, we previously returned IRQ_NONE,
now we return IRQ_HANDLED.

As this must not happen in practice, this does not look like a big deal.

See also commit 3fff0179
	virtio-pci: do not oops on config change if driver not loaded.
for the original motivation behind the driver check.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

On restore, virtio pci does the following:
+ set features
+ init vqs etc - device can be used at this point!
+ set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits

This is in violation of the virtio spec, which
requires the following order:
- ACKNOWLEDGE
- DRIVER
- init vqs
- DRIVER_OK

This behaviour will break with hypervisors that assume spec compliant
behaviour.  It seems like a good idea to have this patch applied to
stable branches to reduce the support butden for the hypervisors.

Cc: stable@vger.kernel.org
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Pull UDF fixes from Jan Kara:
 "Fixes for UDF handling of NFS handles and one fix for proper handling
  of corrupted media"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: saner calling conventions for udf_new_inode()
  udf: fix the udf_iget() vs. udf_new_inode() races
  udf: merge the pieces inserting a new non-directory object into directory
  udf: Set i_generation field
  udf: Properly detect stale inodes
  udf: Make udf_read_inode() and udf_iget() return error
  udf: Avoid infinite loop when processing indirect ICBs
  udf: Fold udf_fill_inode() into __udf_read_inode()
  udf: Avoid dir link count to go negative

Pull cifs/smb3 fixes from Steve French:
 "This includes various cifs and smb3 bug fixes including those for bugs
  found with the recently updated xfstests.

  Also I am working fixes for two additional cifs problems found by
  xfstests which I plan to send later (when reviewed and run additional
  tests)"

* 'for-next-3.17' of git://git.samba.org/sfrench/cifs-2.6:
  Clarify Kconfig help text for CIFS and SMB2/SMB3
  CIFS: Fix wrong filename length for SMB2
  CIFS: Fix wrong restart readdir for SMB1
  CIFS: Fix directory rename error
  cifs: No need to send SIGKILL to demux_thread during umount
  cifs: Allow directIO read/write during cache=strict
  cifs: remove unneeded check of null checking in if condition
  cifs: fix a possible use of uninit variable in SMB2_sess_setup
  cifs: fix memory leak when password is supplied multiple times
  cifs: fix a possible null pointer deref in decode_ascii_ssetup
  Trivial whitespace fix

Pull arch/microblaze fixes from Michal Simek:
 - Kconfig menu structure fix
 - fix number of syscalls
 - fix compilation warnings from allmodconfig

* tag 'microblaze-3.17-rc5' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix number of syscalls
  microblaze: Rename Advance setup to Kernel features
  microblaze: Add mm/Kconfig to advance menu
  arch/microblaze/include/asm/uaccess.h: Use pr_devel() instead of pr_debug()
  arch/microblaze/include/asm/entry.h: Include "linux/linkage.h" to avoid compiling issue

Number of syscalls have to be updated too.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

"Advance setup: menu is misleading that's why rename it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

mm/Kconfig is getting too big to be in root menu.
Move it to submenu.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

When DYNAMIC_DEBUG enabled, pr_debug() depends on KBUILD_MODNAME which
also depends on the modules number in Makefile. The related information
in "scripts/Makefile.lib" line 94:

  # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
  # end up in (or would, if it gets compiled in)
  # Note: Files that end up in two or more modules are compiled without the
  #       KBUILD_MODNAME definition. The reason is that any made-up name would
  #       differ in different configs.

For this case, 'radio-si470x-i2c.o' and 'radio-si470x-common.o' are in
one line, so cause compiling issue. And 'uaccess.h' is a common shared
header (not specially for drivers), so use pr_devel() instead of is OK.

The related error with allmodconfig:

    CC [M]  drivers/media/radio/si470x/radio-si470x-i2c.o
    CC [M]  drivers/media/radio/si470x/radio-si470x-common.o
  In file included from include/linux/printk.h:257:0,
                   from include/linux/kernel.h:13,
                   from drivers/media/radio/si470x/radio-si470x.h:29,
                   from drivers/media/radio/si470x/radio-si470x-common.c:115:
  ./arch/microblaze/include/asm/uaccess.h: In function 'access_ok':
  include/linux/dynamic_debug.h:66:14: error: 'KBUILD_MODNAME' undeclared (first use in this function)
     .modname = KBUILD_MODNAME,   \
                ^
  include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
    DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
    ^
  include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug'
    dynamic_pr_debug(fmt, ##__VA_ARGS__)
    ^
  ./arch/microblaze/include/asm/uaccess.h:101:3: note: in expansion of macro 'pr_debug'
     pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n",
     ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

"entry.h" needs 'asmlinkage', and "asm/linkage.h" does not provide it.
So need include "linux/linkage.h" to use generic one instead of.

The related error (with allmodconfig under microblaze):

    CC [M]  drivers/net/ethernet/emulex/benet/be_main.o
  In file included from ./arch/microblaze/include/asm/processor.h:17:0,
                   from include/linux/prefetch.h:14,
                   from drivers/net/ethernet/emulex/benet/be_main.c:18:
  ./arch/microblaze/include/asm/entry.h:33:19: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
   extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall);
                     ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Pull ext4 bugfix from Ted Ts'o.

[ Hmm.  It's possible we should make kfree() aware of error pointers,
  and use IS_ERR_OR_NULL rather than a NULL check.  But in the meantime
  this is obviously the right fix.  - Linus ]

* 'for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid trying to kfree an ERR_PTR pointer

Pull nfsd bugfixes from Bruce Fields:
 "A couple minor nfsd bugfixes"

* 'for-3.17' of git://linux-nfs.org/~bfields/linux:
  lockd: fix rpcbind crash on lockd startup failure
  nfsd4: fix rd_dircount enforcement

Nikita Yuschenko reported that booting a kernel with init=/bin/sh and
then nfs mounting without portmap or rpcbind running using a busybox
mount resulted in:

  # mount -t nfs 10.30.130.21:/opt /mnt
  svc: failed to register lockdv1 RPC service (errno 111).
  lockd_up: makesock failed, error=-111
  Unable to handle kernel paging request for data at address 0x00000030
  Faulting instruction address: 0xc055e65c
  Oops: Kernel access of bad area, sig: 11 [#1]
  MPC85xx CDS
  Modules linked in:
  CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117
  task: cf29cea0 ti: cf35c000 task.ti: cf35c000
  NIP: c055e65c LR: c0566490 CTR: c055e648
  REGS: cf35dad0 TRAP: 0300   Not tainted  (3.10.44.cge)
  MSR: 00029000 <CE,EE,ME>  CR: 22442488  XER: 20000000
  DEAR: 00000030, ESR: 00000000

  GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086
  00000000
  GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000
  10090ae8
  GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000
  bfa46ef0
  GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000
  cf0ded80
  NIP [c055e65c] call_start+0x14/0x34
  LR [c0566490] __rpc_execute+0x70/0x250
  Call Trace:
  [cf35db80] [00000080] 0x80 (unreliable)
  [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4
  [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8
  [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84
  [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c
  [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108
  [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30
  [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0
  [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8
  [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec
  [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4
  [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44
  [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4
  [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8
  [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc
  [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104
  [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0
  [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0
  [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c

The addition of svc_shutdown_net() resulted in two calls to
svc_rpcb_cleanup(); the second is no longer necessary and crashes when
it calls rpcb_register_call with clnt=NULL.
Reported-by: NNikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Fixes: 679b033d "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up"
Cc: stable@vger.kernel.org
Acked-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Commit 3b299709 "nfsd4: enforce rd_dircount" totally misunderstood
rd_dircount; it refers to total non-attribute bytes returned, not number
of directory entries returned.

Bring the code into agreement with RFC 3530 section 14.2.24.

Cc: stable@vger.kernel.org
Fixes: 3b299709 "nfsd4: enforce rd_dircount"
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Pull s390 fixes from Martin Schwidefsky:
 "A bug fix for the vdso code, the loadparm for booting from SCSI is
  added and the access permissions for the dasd module parameters are
  corrected"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vdso: remove NULL pointer check from clock_gettime
  s390/ipl: Add missing SCSI loadparm attributes to /sys/firmware
  s390/dasd: Make module parameter visible in sysfs

Pull cgroup fixes from Tejun Heo:
 "This pull request includes Alban's patch to disallow '\n' in cgroup
  names.

  Two other patches from Li to fix a possible oops when cgroup
  destruction races against other file operations and one from Vivek to
  fix a unified hierarchy devel behavior"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: check cgroup liveliness before unbreaking kernfs
  cgroup: delay the clearing of cgrp->kn->priv
  cgroup: Display legacy cgroup files on default hierarchy
  cgroup: reject cgroup names with '\n'

Pull percpu fixes from Tejun Heo:
 "One patch to fix a failure path in the alloc path.  The bug is
  dangerous but probably not too likely to actually trigger in the wild
  given that there hasn't been any report yet.

  The other two are low impact fixes"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: free percpu allocation info for uniprocessor system
  percpu: perform tlb flush after pcpu_map_pages() failure
  percpu: fix pcpu_alloc_pages() failure path

Pull libata fixes from Tejun Heo:
 "Two patches are to add PCI IDs for ICH9 and all others are device
  specific fixes.  Nothing too interesting"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  ahci: add pcid for Marvel 0x9182 controller
  ata: Disabling the async PM for JMicron chip 363/361
  ata_piix: Add Device IDs for Intel 9 Series PCH
  ahci: Add Device IDs for Intel 9 Series PCH
  ata: ahci_tegra: Read calibration fuse

Pull networking fixes from David Miller:

 1) Fix skb leak in mac802154, from Martin Townsend

 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira
    Ayuso

 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel

 4) Fix RX checksum configuration in stmmac driver, from Giuseppe
    CAVALLARO

 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea,
    i40e, i40evf, mvneta, and qlge, from Vlad Yasevich

 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO

 7) Try high order allocations more sanely for SKBs, specifically if a
    high order allocation fails, fall back directly to zero order pages
    rather than iterating down one order at a time.  From Eric Dumazet

 8) Fix a memory leak in openvswitch, from Li RongQing

 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky

10) RTNL locking was busted in setsockopt for anycast and multicast, fix
    from Sabrina Dubroca

11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel

12) DocBook typo fixes, from Masanari Iida

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
  ipv6: restore the behavior of ipv6_sock_ac_drop()
  amd-xgbe: Enable interrupts for all management counters
  amd-xgbe: Treat certain counter registers as 64 bit
  greth: moved TX ring cleaning to NAPI rx poll func
  cnic : Cleanup CONFIG_IPV6 & VLAN check
  net: treewide: Fix typo found in DocBook/networking.xml
  bnx2x: Fix link problems for 1G SFP RJ45 module
  3c59x: avoid panic in boomerang_start_xmit when finding page address:
  netfilter: add explicit Kconfig for NETFILTER_XT_NAT
  ipv6: use addrconf_get_prefix_route() to remove peer addr
  ipv6: fix a refcnt leak with peer addr
  net-timestamp: only report sw timestamp if reporting bit is set
  drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros
  l2tp: fix race while getting PMTU on PPP pseudo-wire
  ipv6: fix rtnl locking in setsockopt for anycast and multicast
  VMXNET3: Check for map error in vmxnet3_set_mc
  openvswitch: distinguish between the dropped and consumed skb
  amd-xgbe: Fix initialization of the wrong spin lock
  openvswitch: fix a memory leak
  netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG
  ...

John W. Linville says:

====================
pull request: wireless 2014-09-05

Please pull this batch of fixes intended for the 3.17 stream...

For the mac80211 bits, Johannes says:

"Here are a few fixes for mac80211. One has been discussed for a while
and adds a terminating NUL-byte to the alpha2 sent to userspace, which
shouldn't be necessary but since many places treat it as a string we
couldn't move to just sending two bytes.

In addition to that, we have two VLAN fixes from Felix, a mesh fix, a
fix for the recently introduced RX aggregation offload, a revert for
a broken patch (that luckily didn't really cause any harm) and a small
fix for alignment in debugfs."

For the iwlwifi bits, Emmanuel says:

"I revert a patch that disabled CTS to self in dvm because users
reported issues. The revert is CCed to stable since the offending
patch was sent to stable too. I also bump the firmware API versions
since a new firmware is coming up. On top of that, Marcel fixes a
bug I introduced while fixing a bug in our Kconfig file."

Please let me know if there are problems!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible that the interface is already gone after joining
the list of anycast on this interface as we don't hold a refcount
for the device, in this case we are safe to ignore the error.

What's more important, for API compatibility we should not
change this behavior for applications even if it were correct.

Fixes: commit a9ed4a29 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast")
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

new link for - How to piss off a Linux kernel subsystem maintainer
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The NFS/RDMA Kconfig symbol was split into separate options for client
and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig
options for NFSoRDMA client and server support").

Update the documentation to reflect this split.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hpfall.c was renamed to freefall.c in 3.16, but this file still refer to
hpfall.c instead of freefall.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The example code provided with the i2c device interface documentation
won't compile since it uses the reserved word "register" to name a
variable.

The compiler fails with this error message:

 error: expected identifier or '(' before '=' token
   __u8 register = 0x20; /* Device register to access */
                 ^

Rename the variable "register" to simply "reg" in the example code.

Another couple of typos has been fixed as well.
[Change "! =" to "!=".]
Signed-off-by: NJose Alarcon Roldan <jose.alarcon.roldan@gmail.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Despite the fact that these functions have been around for years, they
are little used (only 15 uses in 13 files at the preseht time) even
though many other files use work-arounds to achieve the same result.

By documenting them, hopefully they will become more widely used.
Signed-off-by: NRob Jones <rob.jones@codethink.co.uk>
Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>