- 30 11月, 2006 1 次提交
-
-
由 Francois Romieu 提交于
This changes the type of variable "i" in rtl8169_init_one() from "unsigned int" to "int". "i" is checked for < 0 later, which can never happen for "unsigned". This results in broken error handling. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 11月, 2006 1 次提交
-
-
由 Joakim Tjernlund 提交于
When we sleep and wait for a suspended operation to be resumed, go back and check until it's ready -- don't just continue after the first time we're woken. This can cause file system corruption. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 11月, 2006 3 次提交
-
-
由 Brian King 提交于
Fixes ata_sas_queuecmd to properly handle a failure from __ata_scsi_queuecmd. Signed-off-by: NBrian King <brking@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jason Gaston 提交于
This patch adds the Intel ICH9 AHCI controller DID's for SATA support. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Do not schedule EH for revalidation on wcache on/off if old EH. Old EH cannot handle it and will result in WARN_ON()'s and oops. This closes bug #7412. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 26 11月, 2006 16 次提交
-
-
由 Andrew de Quincey 提交于
The tda10086 causes an oops (divide by zero) if a zero symbol rate is used; this prevents this. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
The old code would accept any device on the same i2c address as the saa711x chips as an saa711x. However, this fails with saa717x chips, which use that same address and so are misdetected as a saa7111. Now check whether the chip is really a saa711x model. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Luca Risolia 提交于
The patch fix bug 5748. Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ira Snyder 提交于
Sparse noticed a lock imbalance in read_from_buf(). Further inspection shows that the lock should not be held when the function exits. This adds a spin_unlock_irqrestore(), so that every exit path of the read_from_buf() function is consistent. The unlock was missing on an error path. Signed-off-by: NIra W. Snyder <devel@irasnyder.com> Signed-off-by: NHans J. Koch <koch@hjk-az.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Spotted by coverity/Adrian Bunk. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Oliver Endriss 提交于
New module parameter diseqc_method for cards with subsystem-id 13c2:1003. - 0: unreliable method, can be used by all board revisions (default) - 1: reliable method, works for newer board layouts only The parameter has no effect for cards with other subsystem-ids. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Fixes to DISEQC on these cards inadvertently broke normal tone/voltage signalling. This restores the necessary function. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jean Delvare 提交于
Looks like a broken masking to me, binary not is used where bitwise not was intended. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Kozlowski 提交于
This is a bug. When checking for ati_remote->outbuf we free freeing ati_remote->inbuf so we end up freeing ati_remote->inbuf twice. Also the checks for 'ati_remote->inbuf != NULL' and 'ati_remote->outbuf != NULL' are redundant as usb_buffer_free() does this. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
The return value of platform_device_register_simple() should be checked by IS_ERR(). This patch also fix misc_register() error case. Because misc_register() returns error code. Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeremy Higdon 提交于
This patch removes a module_exit function that sgiioc4 should not have had. It seems that the IDE layer doesn't support submodule unloading. sgiioc4 was the only driver in drivers/ide/pci that had an exit function. After an unload, the devices would stay around and the next attempt to reference would crash... Signed-off-by: NJeremy Higdon <jeremy@sgi.com> Acked-by: N"Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Catalin Marinas 提交于
dev->devt_attr is allocated in device_add() but it is never freed in device_del() in the drivers/base/core.c file (reported by kmemleak). Signed-off-by: NCatalin Marinas <catalin.marinas@gmail.com> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The correct order is: NULL check before dereference This was a guaranteed NULL dereference with debugging enabled since rs5c372_sysfs_show_osc() does actually pass NULL... Spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
I got a lockdep warning when running "rtctest" so I though it'd be good to see what was up. - The warning was for rtc->irq_task_lock, gotten from rtc_update_irq() by irq handlerss ... but in a handful of other cases, grabbed without blocking IRQs. - Some callers to rtc_update_irq() were not ensuring IRQs were blocked, yet the routine expects that; make sure all callers block IRQs. It would appear that RTC API tests haven't been part of anyone's kernel regression test suite recently, at least not with lockdep running. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
The RTC framework has an irq_set_freq() method that should be used to manage the periodic IRQ frequency, but the current ioctl logic doesn't know how to do that. This patch teaches it how. This means that drivers implementing irq_set_freq() will automatically support RTC_IRQP_{READ,SET} ioctls; that logic doesn't need duplication within the driver. [akpm@osdl.org: export rtc_irq_set_freq] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Ritz 提交于
Add required locking to dfbc9e9dSigned-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Pavol Gono <Palo.Gono@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 11月, 2006 2 次提交
-
-
由 Jean Delvare 提交于
Fix recent i2c-ixp4xx compilation breakage. Sorry for overlooking it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Jones 提交于
processor_perflib.c::acpi_processor_ppc_notifier() check if the value returned by the processor's _PPC method is 0 and return failed if so. This is wrong since 0 indicate that the bios think the processor can go to the highest frequency. This patch for example fix the HP NX 6125 to allow its highest frequency to be available. Signed-off-by: NBruno Ducrot <ducrot@poupinou.org> Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 11月, 2006 2 次提交
-
-
由 Linus Torvalds 提交于
Not all graphic page remappers support physical addresses over the 4GB mark for remapping, so while some do (the AMD64 GART always did, and I just fixed the i965 to do so properly), we're safest off just forcing GFP_DMA32 allocations to make sure graphics pages get allocated in the low 32-bit address space by default. AGP sub-drivers that really care, and can do better, could just choose to implement their own allocator (or we could add another "64-bit safe" default allocator for their use), but quite frankly, you're not likely to care in practice. So for now, this trivial change means that we won't be allocating pages that we can't map correctly by mistake on x86-64. [ On traditional 32-bit x86, this could never happen, because GFP_KERNEL would never allocate any highmem memory anyway ] Acked-by: NAndi Kleen <ak@suse.de> Acked-by: NDave Jones <davej@redhat.com> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This introduces a i965-specific "mask_memory()" function that knows about the extended physical addresses that the i965 supports. This allows us to correctly map in physical memory in the >4GB range into the GTT. Also simplify/clean-up the i965 case for the aperture sizing by just returning the fixed 512kB size from "fetch_size()". We don't really care that not all of the aperture may be visible - the only thing that cares about the aperture size is the Intel "stolen memory" calculation, which depends on the fixed size. Cc: Keith Packard <keithp@keithp.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 11月, 2006 2 次提交
-
-
由 Ira W. Snyder 提交于
Sparse noticed a locking imbalance in tg3_open(). This patch adds an unlock to one of the error paths, so that tg3_open() always exits without the lock held. Signed-off-by: NIra W. Snyder <kernel@irasnyder.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
The ONDEMAND governor needs FREQ_TABLE Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 11月, 2006 7 次提交
-
-
由 Bryan O'Sullivan 提交于
ipath uses skb functions and won't build without CONFIG_NET. Spotted by Randy Dunlap. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Linus Torvalds 提交于
This is a quick hack to overcome the fact that SRCU currently does not allow static initializers, and we need to sometimes initialize those things before any other initializers (even "core" ones) can do so. Currently we don't allow this at all for modules, and the only user that needs is right now is cpufreq. As reported by Thomas Gleixner: "Commit b4dfdbb3 ("[PATCH] cpufreq: make the transition_notifier chain use SRCU breaks cpu frequency notification users, which register the callback > on core_init level." Cc: Thomas Gleixner <tglx@timesys.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@osdl.org>, Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Toralf Foerster 提交于
Fix a build error for the enter:now PCI card. Signed-off-by: NToralf Foerster <toralf.foerster@gmx.de> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix printk format warnings: drivers/char/ftape/zftape/zftape-buffers.c:87: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/char/ftape/zftape/zftape-buffers.c:104: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
i2c_bit_add_bus() returns -E; -E != 0 => err = 1 probe fails with positive error code Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org> Cc: Deepak Saxena <dsaxena@mvista.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Ritz 提交于
Having unbound PCMCIA devices: doing a 'find /sys' after a 'rmmod pcmcia' gives an oops because the pcmcia_device is not unregisterd from the driver core. fixes bugzilla #7481 Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Dominik Brodowski <linux@dominikbrodowski.net> Cc: Pavol Gono <Palo.Gono@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 11月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 37605a69. Again. This same bug has now been introduced twice: it was done earlier by commit b8d35192, only to be reverted last time in commit 72945b2b. We must NOT try to queue up notify handlers to another thread than the normal ACPI execution thread, because the notifications on some systems seem to just keep on accumulating until we run out of memory and/or threads. Keeping events within the one deferred execution thread automatically throttles the events properly. At least the Compaq N620c will lock up completely on the first thermal event without this patch reverted. Cc: David Brownell <david-b@pacbell.net> Cc: Len Brown <len.brown@intel.com> Cc: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 11月, 2006 5 次提交
-
-
由 Jan-Benedict Glaw 提交于
I moved to a different town and my old snail-mail address is invalid now. Also, there's no need at all to have any address like that in the sources, so remove it completely. Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
-
由 Linus Torvalds 提交于
Benh points out that the msgs[0].flags entry never got initialized, and since it's an automatic stack allocation, it could have any random value, which is bad. Rewrite the initializer to explicitly initialize all fields of the small i2c_msg structure array we generate. Just to keep it all obvious, let's handle msgs[1].buf in the same initializer while we're at it, instead of initializing that one separately later. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
When radeonfb was changed to use the new "generic" ddc, a bit of code initializing the GPIO lines was lost, causing it to not work if the firmware didn't configure them properly, which seems to happen on some cards. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dennis Stosberg 提交于
This caused the system to stall when the aoe module was loaded. The error was introduced in commit 4ca5224fSigned-off-by: NDennis Stosberg <dennis@stosberg.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Amol Lad 提交于
ioremap must be balanced with iounmap in error path. Please consider for 2.6.19. Signed-off-by: NAmol Lad <amol@verismonetworks.com> Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-