- 16 8月, 2019 1 次提交
-
-
由 Randy Dunlap 提交于
lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so XILINX_SDFEC should depend on HAS_IOMEM. Fixes this build error (as seen on UML builds): ERROR: "devm_ioremap_resource" [drivers/misc/xilinx_sdfec.ko] undefined! Fixes: 76d83e1c ("misc: xilinx-sdfec: add core driver") Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Derek Kiernan <derek.kiernan@xilinx.com> Cc: Dragan Cvetic <dragan.cvetic@xilinx.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/f9004be5-9925-327b-3ec2-6506e46fe565@infradead.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 8月, 2019 6 次提交
-
-
由 Ben Segal 提交于
When unmasking IRQs inside the ASIC, the driver passes an array of all the IRQ to unmask. The ASIC's CPU is working in LE so when running in a BE host, the driver needs to do the proper endianness swapping when preparing this array. In addition, this patch also fixes the endianness of a couple of kernel log debug messages that print values of packets Signed-off-by: NBen Segal <bpsegal20@gmail.com> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
-
由 Oded Gabbay 提交于
The PQs of internal H/W queues (QMANs) can be located in different memory areas for different ASICs. Therefore, when writing PQEs, we need to use the correct function according to the location of the PQ. e.g. if the PQ is located in the device's memory (SRAM or DRAM), we need to use memcpy_toio() so it would work in architectures that have separate address ranges for IO memory. This patch makes the code that writes the PQE to be ASIC-specific so we can handle this properly per ASIC. Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com> Tested-by: NBen Segal <bpsegal20@gmail.com>
-
由 Ben Segal 提交于
This patch fix the CQ irq handler to work in hosts with BE architecture. It adds the correct endian-swapping macros around the relevant memory accesses. Signed-off-by: NBen Segal <bpsegal20@gmail.com> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
-
由 Ben Segal 提交于
Packets that arrive from the user and need to be parsed by the driver are assumed to be in LE format. This patch fix all the places where the code handles these packets and use the correct endianness macros to handle them, as the driver handles the packets in CPU format (LE or BE depending on the arch). Signed-off-by: NBen Segal <bpsegal20@gmail.com> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
-
由 Tomer Tayar 提交于
The patch fix the DRAM usage accounting by adding a missing update of the DRAM memory consumption, when a context is being torn down without an organized release of the allocated memory. Signed-off-by: NTomer Tayar <ttayar@habana.ai> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
-
由 Tomer Tayar 提交于
In case kernel context init fails during device initialization, both hl_ctx_put() and kfree() are called, ending with a double free of the kernel context. Calling kfree() is needed only when a failure happens between the allocation of the kernel context and its initialization, so move it to there and remove it from the error flow. Signed-off-by: NTomer Tayar <ttayar@habana.ai> Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com> Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
-
- 10 8月, 2019 12 次提交
-
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: db1xxx_defconfig mips): drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: omap1_defconfig arm): drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: s390): drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’: drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->changed_side == 1) { ^ drivers/s390/net/ctcm_fsms.c:1707:2: note: here case MPCG_STATE_XID0IOWAIX: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’: drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (callback) ^ drivers/s390/net/ctcm_mpc.c:360:2: note: here case MPCG_STATE_XID0IOWAIT: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’: drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && ^ drivers/s390/net/ctcm_mpc.c:1472:2: note: here default: ^~~~~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’: drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->estconnfunc) { ^ drivers/s390/net/ctcm_mpc.c:2092:2: note: here case MPCG_STATE_FLOWC: ^~~~ drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’: drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (IS_OSN(card)) { ^ drivers/s390/net/qeth_l2_main.c:337:3: note: here default: ^~~~~~~ Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’: drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); drivers/crypto/ux500/cryp/cryp.c:318:2: note: here case CRYP_KEY_SIZE_192: ^~~~ drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); drivers/crypto/ux500/cryp/cryp.c:322:2: note: here case CRYP_KEY_SIZE_128: ^~~~ drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); drivers/crypto/ux500/cryp/cryp.c:326:2: note: here default: ^~~~~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_4_r, ®->key_4_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:365:2: note: here case CRYP_KEY_SIZE_192: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_3_r, ®->key_3_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:369:2: note: here case CRYP_KEY_SIZE_128: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_2_r, ®->key_2_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:373:2: note: here default: ^~~~~~~ Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume': drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!IS_ERR(omap->hsic480m_clk[i])) { ^ drivers/mfd/omap-usb-host.c:313:3: note: here case OMAP_EHCI_PORT_MODE_TLL: ^~~~ drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend': drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!IS_ERR(omap->hsic480m_clk[i])) ^ drivers/mfd/omap-usb-host.c:349:3: note: here case OMAP_EHCI_PORT_MODE_TLL: ^~~~ Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Gustavo A. R. Silva 提交于
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate': drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=] div *= 2; ~~~~^~~~ drivers/mfd/db8500-prcmu.c:1593:2: note: here case PRCM_DSI_PLLOUT_SEL_PHI_2: ^~~~ drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=] div *= 2; ~~~~^~~~ drivers/mfd/db8500-prcmu.c:1595:2: note: here case PRCM_DSI_PLLOUT_SEL_PHI: ^~~~ Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
-
由 Josh Poimboeuf 提交于
Objtool reports: drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x36: redundant UACCESS disable __copy_from_user() already does both STAC and CLAC, so the user_access_end() in its error path adds an extra unnecessary CLAC. Fixes: 0b2c8f8b ("i915: fix missing user_access_end() in page fault exception case") Reported-by: NThomas Gleixner <tglx@linutronix.de> Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NNick Desaulniers <ndesaulniers@google.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://github.com/ClangBuiltLinux/linux/issues/617 Link: https://lkml.kernel.org/r/51a4155c5bc2ca847a9cbe85c1c11918bb193141.1564086017.git.jpoimboe@redhat.com
-
- 09 8月, 2019 2 次提交
-
-
由 Coly Li 提交于
This reverts commit 89e0341a. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341a ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341a ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: NPeifeng Lin <pflin@suse.com> Acked-by: NAlexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: NColy Li <colyli@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Mikulas Patocka 提交于
A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 08 8月, 2019 10 次提交
-
-
由 Thiébaud Weksteen 提交于
Currently, the authorized_default and interface_authorized_default attributes for HCD are set up after the uevent has been sent to userland. This creates a race condition where userland may fail to access this file when processing the event. Move the appending of these attributes earlier relying on the usb_bus_notify dispatcher. Signed-off-by: NThiébaud Weksteen <tweek@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 He Zhe 提交于
Since commit 3582dd29 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [<ffffffffc01d95e5>] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd29 ("aoe: convert aoeblk to blk-mq") Signed-off-by: NHe Zhe <zhe.he@windriver.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Hans de Goede 提交于
Commit 4a6ef8e3 ("pwm: Add support referencing PWMs from ACPI") made pwm_get unconditionally return the acpi_pwm_get return value if the device passed to pwm_get has an ACPI fwnode. But even if the passed in device has an ACPI fwnode, it does not necessarily have the necessary ACPI package defining its pwm bindings, especially since the binding / API of this ACPI package has only been introduced very recently. Up until now X86/ACPI devices which use a separate pwm controller for controlling their LCD screen's backlight brightness have been relying on the static lookup-list to get their pwm. pwm_get unconditionally returning the acpi_pwm_get return value breaks this, breaking backlight control on these devices. This commit fixes this by making pwm_get fall back to the static lookup-list if acpi_pwm_get returns -ENOENT. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96571 Reported-by: youling257@gmail.com Fixes: 4a6ef8e3 ("pwm: Add support referencing PWMs from ACPI") Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NNikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Oliver Neukum 提交于
We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e88 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: NOliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oliver Neukum 提交于
This reverts commit d710734b. This simplification causes a deadlock. Reported-by: syzbot+7bbcbe9c9ff0cd49592a@syzkaller.appspotmail.com Fixes: d710734b ("USB: rio500: simplify locking") Cc: stable <stable@vger.kernel.org> Signed-off-by: NOliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092854.23519-1-oneukum@suse.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Colin Ian King 提交于
Currently when too many retries have occurred there is a memory leak on the allocation for reply on the error return path. Fix this by kfree'ing reply before returning. Addresses-Coverity: ("Resource leak") Fixes: a9cd9c04 ("drm/vmwgfx: Add a check to handle host message failure") Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NDeepak Rawat <drawat@vmware.com> Signed-off-by: NDeepak Rawat <drawat@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
-
The configuration register of the tmp75b sensor is 16bit long, however the first byte is reserved, so there is not no need to take care of it. Because the order of the bytes is little endian and it is only necessary to write one byte, the desired bits must be shifted into a 8 bit range. Fixes: 39abe9d8 ("hwmon: (lm75) Add support for TMP75B") Cc: stable@vger.kernel.org Signed-off-by: NIker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190801075324.4638-1-iker.perez@codethink.co.ukSigned-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by: NGilles Buloz <Gilles.Buloz@kontron.com> Cc: Gilles Buloz <Gilles.Buloz@kontron.com> Cc: stable@vger.kernel.org Fixes: 3434f378 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Jens Axboe 提交于
Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by: NKrishna Ram Prakash R <krp@gtux.in> Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 07 8月, 2019 9 次提交
-
-
由 Alex Deucher 提交于
This reverts commit 1a058c33. This interface is still in too much flux. Revert until it's sorted out. Acked-by: NOak Zeng <Oak.Zeng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mika Westerberg 提交于
Commit c2bf1fc2 ("PCI: Add missing link delays required by the PCIe spec") turned out causing issues with some systems either by making them unresponsive or slowing down runtime and system wide resume of PCIe devices. While root cause for the unresponsiveness is still under investigation given the amount of issues reported better to revert it for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204413 Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://lore.kernel.org/linux-pci/2857501d-c167-547d-c57d-d5d24ea1f1dc@molgen.mpg.de/Reported-by: NMatthias Andree <matthias.andree@gmx.de> Reported-by: NPaul Menzel <pmenzel@molgen.mpg.de> Reported-by: NNicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Marek Olšák 提交于
This reverts commit 9ed2c993. SET_CONFIG_REG writes to memory if register shadowing is enabled, causing a VM fault. NGG streamout is unstable anyway, so all UMDs should use legacy streamout. I think Mesa is the only driver using NGG streamout. Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NLe Ma <Le.Ma@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Atish Patra 提交于
There is only one clocksource in RISC-V. The boot cpu initializes that clocksource. No need to keep a percpu data structure. Signed-off-by: NAtish Patra <atish.patra@wdc.com> Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com> Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Vladimir Oltean 提交于
The IS_ERR_OR_NULL(priv->clock) check inside sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync from actually being run. Additionally, sja1105_ptp_clock_unregister() does not actually get run, when placed in sja1105_remove(). The DSA switch gets torn down, but the sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister needs to be moved to sja1105_teardown, to be symmetrical with sja1105_ptp_clock_register which is called from the DSA sja1105_setup. It is strange to fix a "fixes" patch, but the probe failure can only be seen when the attached PHY does not respond to MDIO (issue which I can't pinpoint the reason to) and it goes away after I power-cycle the board. This time the patch was validated on a failing board, and the kernel panic from the fixed commit's message can no longer be seen. Fixes: 29dd908d ("net: dsa: sja1105: Cancel PTP delayed work on unregister") Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
It looks like the FDB dump taken from first-generation switches also contains information on whether entries are static or not. So use that instead of searching through the driver's tables. Fixes: d7637782 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T") Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
When put under a bridge with vlan_filtering 0, the SJA1105 ports will flood all traffic as if learning was broken. This is because learning interferes with the rx_vid's configured by dsa_8021q as unique pvid's. So learning technically still *does* work, it's just that the learnt entries never get matched due to their unique VLAN ID. The setting that saves the day is Shared VLAN Learning, which on this switch family works exactly as desired: VLAN tagging still works (untagged traffic gets the correct pvid) and FDB entries are still populated with the correct contents including VID. Also, a frame cannot violate the forwarding domain restrictions enforced by its classified VLAN. It is just that the VID is ignored when looking up the FDB for taking a forwarding decision (selecting the egress port). This patch activates SVL, and the result is that frames with a learnt DMAC are no longer flooded in the scenario described above. Now exactly *because* SVL works as desired, we have to revisit some earlier patches: - It is no longer necessary to manipulate the VID of the 'bridge fdb {add,del}' command when vlan_filtering is off. This is because now, SVL is enabled for that case, so the actual VID does not matter*. - It is still desirable to hide dsa_8021q VID's in the FDB dump callback. But right now the dump callback should no longer hide duplicates (one per each front panel port's pvid, plus one for the VLAN that the CPU port is going to tag a TX frame with), because there shouldn't be any (the switch will match a single FDB entry no matter its VID anyway). * Not really... It's no longer necessary to transform a 'bridge fdb add' into 5 fdb add operations, but the user might still add a fdb entry with any vid, and all of them would appear as duplicates in 'bridge fdb show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we can prune the duplicates at insertion time. ** The VID of 0 is better than 1 because it is always guaranteed to be in the ports' hardware filter. DSA also avoids putting the VID inside the netlink response message towards the bridge driver when we return this particular VID, which makes it suitable for FDB entries learnt with vlan_filtering off. Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: NVladimir Oltean <olteanv@gmail.com> Signed-off-by: NGeorg Waibel <georg.waibel@sensor-technik.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nishka Dasgupta 提交于
Each iteration of for_each_available_child_of_node() puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put() before the return. Additionally, the local variable ports in the function qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(), which gets a node but does not put it. If the function returns without putting ports, it may cause a memory leak. Hence put ports before the mid-loop return statement, and also outside the loop after its last usage in this function. Issues found with Coccinelle. Signed-off-by: NNishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiangfeng Xiao 提交于
On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by: NJiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-