stable inclusion
from stable-v5.10.94
commit 47dd693c94bf48c7fef470f845f9a1cb41d8328a
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=47dd693c94bf48c7fef470f845f9a1cb41d8328a

--------------------------------

[ Upstream commit 68ac0f38 ]

xfrm ineterface does not allow xfrm if_id = 0
fail to create or update xfrm state and policy.

With this commit:
 ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0
 RTNETLINK answers: Invalid argument

 ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \
            reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \
            0x1111111111111111111111111111111111111111 96 if_id 0
 RTNETLINK answers: Invalid argument

v1->v2 change:
 - add Fixes: tag

Fixes: 9f8550e4 ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit db369047e3b3b597319550d6cd029dabfe0a6e7a
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=db369047e3b3b597319550d6cd029dabfe0a6e7a

--------------------------------

[ Upstream commit 8dce4391 ]

xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4.

Now explicitly fail to create an xfrm interface when if_id = 0

With this commit:
 ip link add ipsec0  type xfrm dev lo  if_id 0
 Error: if_id must be non zero.

v1->v2 change:
 - add Fixes: tag

Fixes: 9f8550e4 ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: NAntony Antony <antony.antony@secunet.com>
Reviewed-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 37441ddadc1e02a33c866ff836d5229ed600e78a
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=37441ddadc1e02a33c866ff836d5229ed600e78a

--------------------------------

[ Upstream commit 37af43b2 ]

If clocks for some reason couldn't be enabled, probe function returns
immediately, without disabling PM. This obviously leaves PM ref counters
unbalanced.

Fix that by jumping to appropriate error path, so effects of PM functions
are reversed.

Fixes: 775fec69 ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: NJernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 3849ec830bf714d57d08a0efd1e1125b023ee4e7
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3849ec830bf714d57d08a0efd1e1125b023ee4e7

--------------------------------

[ Upstream commit 5566174c ]

Upon failure, dma_alloc_coherent() returns NULL. If that does happen,
passing some uninitialised stack contents to dma_mapping_error() - which
belongs to a different API in the first place - has precious little
chance of detecting it.

Also include the correct header, because the fragile transitive
inclusion currently providing it is going to break soon.

Fixes: 20e7dce2 ("drm/tegra: Remove memory allocation from Falcon library")
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Mikko Perttunen <mperttunen@nvidia.com>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit b230114bc57a3a0c9da11a18954e747b5bb92c5d
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b230114bc57a3a0c9da11a18954e747b5bb92c5d

--------------------------------

[ Upstream commit 0b665d4a ]

Set the maximum register to 0xff so we can dump the registers for this
device in debugfs.

Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver")
Cc: Rob Clark <robdclark@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NRobert Foss <robert.foss@linaro.org>
Signed-off-by: NRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215002529.382383-1-swboyd@chromium.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit db97fc2c4425969d48abc0865564af587fd92c9f
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=db97fc2c4425969d48abc0865564af587fd92c9f

--------------------------------

[ Upstream commit f31b0e24 ]

Make safe_status debugfs fs file actually return safe status rather than
danger status data.

Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support")
Signed-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: NAbhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211201222633.2476780-3-dmitry.baryshkov@linaro.orgSigned-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 3580055d1fca178be359bef6831d6741b5a23921
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3580055d1fca178be359bef6831d6741b5a23921

--------------------------------

[ Upstream commit 72cb4c48 ]

There must be three parameters in gpio-ranges property. Fixes this not
very helpful error message:

  OF: /soc/pinctrl@1000000: (null) = 3 found 3

Fixes: 1e827785 ("arm64: dts: Add ipq6018 SoC and CP01 board support")
Cc: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Tested-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.ilSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 6f20a5a98a906796572b14ea5c56373ef8a5384f
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f20a5a98a906796572b14ea5c56373ef8a5384f

--------------------------------

[ Upstream commit c02b360c ]

Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback.

This setup has issues, ex if we try to play on headset the audio stream is
also sent to SoundWire Speakers and we will hear sound in both headsets and speakers.

Make a separate device for Speakers and Headset so that the streams are
different and handled properly.

Fixes: 45021d35 ("arm64: dts: qcom: c630: Enable audio support")
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: NSteev Klimaszewski <steev@kali.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211209175342.20386-2-srinivas.kandagatla@linaro.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 394ee480aa3e3397fbccd946ed124f876ff4ca68
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=394ee480aa3e3397fbccd946ed124f876ff4ca68

--------------------------------

[ Upstream commit eccd2513 ]

In ath11k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().

Fix this bug by adding a check of arg.extraie.ptr.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_ATH11K=m show no new warnings, and our static
analyzer no longer warns about this code.

Fixes: d5c65159 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: NZhou Qingyang <zhou1615@umn.edu>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211202155348.71315-1-zhou1615@umn.eduSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit f6e4a6cbdb6fa32d204356da1b6d102b663df78b
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f6e4a6cbdb6fa32d204356da1b6d102b663df78b

--------------------------------

[ Upstream commit 43f0633f ]

The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes: b0444f18 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: NJiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 1a8869de328a51949505ec0acfbb8168c54ec48f
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1a8869de328a51949505ec0acfbb8168c54ec48f

--------------------------------

[ Upstream commit 3d5831a4 ]

I got a null-ptr-deref report:

BUG: kernel NULL pointer dereference, address: 0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
 msi001_probe+0x13b/0x24b [msi001]
 spi_probe+0xeb/0x130
...
 do_syscall_64+0x35/0xb0

In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().

Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.

Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com
Fixes: 93203dd6 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWang Hai <wanghai38@huawei.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit a79327bb019131a0d0571257b3f3925b00a98637
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a79327bb019131a0d0571257b3f3925b00a98637

--------------------------------

[ Upstream commit 589a9f0e ]

dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597

The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.

[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ruSigned-off-by: NAnton Vasilyev <vasilyev@ispras.ru>
Fixes: 299c7007 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 958a8819d41420d7a74ed922a09cacc0ba3a4218
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=958a8819d41420d7a74ed922a09cacc0ba3a4218

--------------------------------

[ Upstream commit 4754eab7 ]

Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).

|[    5.548038] No RedBoot partition table detected in 30000000.flash
|[    5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[    5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[    7.039504] Waiting for root device /dev/mtdblock3...

The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.

Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.

>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".

With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.

Fixes: b5a923f8 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: NSteven Maddox <s.maddox@lantizia.me.uk>
Signed-off-by: NChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NSteven Maddox <s.maddox@lantizia.me.uk>
Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 3e51460638a67f602e27b30c7e2f66255a797d74
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3e51460638a67f602e27b30c7e2f66255a797d74

--------------------------------

[ Upstream commit ba53ee7f ]

frag_timer will be created & initialized for stations when
they associate and will be deleted during every key installation
while flushing old fragments.

For AP interface self peer will be created and Group keys
will be installed for this peer, but there will be no real
Station entry & hence frag_timer won't be created and
initialized, deleting such uninitialized kernel timers causes below
warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS
enabled.

[ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
[ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0
[ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi
[ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14
[ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 177.871804] pc : debug_print_object+0xb0/0xf0
[ 177.876155] lr : debug_print_object+0xb0/0xf0
[ 177.880505] sp : ffffffc01169b5a0
[ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078
[ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738
[ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628
[ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6
[ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152
[ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0
[ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8
[ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001
[ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054
[ 177.955130] Call trace:
[ 177.957567] debug_print_object+0xb0/0xf0
[ 177.961570] debug_object_assert_init+0x124/0x178
[ 177.966269] try_to_del_timer_sync+0x1c/0x70
[ 177.970536] del_timer_sync+0x30/0x50
[ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k]
[ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k]
[ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0
[ 177.989722] ieee80211_key_replace+0x360/0x740
[ 177.994160] ieee80211_key_link+0x16c/0x210
[ 177.998337] ieee80211_add_key+0x138/0x338
[ 178.002426] nl80211_new_key+0xfc/0x258
[ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120
[ 178.011565] genl_rcv_msg+0xd8/0x1c8
[ 178.015134] netlink_rcv_skb+0x38/0xf8
[ 178.018877] genl_rcv+0x34/0x48
[ 178.022012] netlink_unicast+0x174/0x230
[ 178.025928] netlink_sendmsg+0x188/0x388
[ 178.029845] ____sys_sendmsg+0x218/0x250
[ 178.033763] ___sys_sendmsg+0x68/0x90
[ 178.037418] __sys_sendmsg+0x44/0x88
[ 178.040988] __arm64_sys_sendmsg+0x20/0x28
[ 178.045077] invoke_syscall.constprop.5+0x54/0xe0
[ 178.049776] do_el0_svc+0x74/0xc0
[ 178.053084] el0_svc+0x10/0x18
[ 178.056133] el0t_64_sync_handler+0x88/0xb0
[ 178.060310] el0t_64_sync+0x148/0x14c
[ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]---

Add changes to not to delete frag timer for peers during
group key installation.

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1

Fixes: c3944a56 ("ath11k: Clear the fragment cache during key install")
Signed-off-by: NRameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: NKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1639071421-25078-1-git-send-email-quic_ramess@quicinc.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit b35263f000a5a4686bfc6431e5347b307f5aff64
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b35263f000a5a4686bfc6431e5347b307f5aff64

--------------------------------

[ Upstream commit 3d6b6613 ]

We should not call pm_runtime_resume_and_get where the reference
count is expected to be incremented unconditionally.  This patch
reverts these calls to the original unconditional get_sync call.
Reported-by: NHeiner Kallweit <hkallweit1@gmail.com>
Fixes: 747bf30f ("crypto: stm32/cryp - Fix PM reference leak...")
Fixes: 1cb3ad70 ("crypto: stm32/hash - Fix PM reference leak...")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 1f5b81874f2722bf2bb23ca0268f9c70728fb759
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1f5b81874f2722bf2bb23ca0268f9c70728fb759

--------------------------------

[ Upstream commit 4b898d5c ]

Extra crypto manager auto test were crashing or failling due
to 2 reasons:
- block in a dead loop (dues to issues in cipher end process management)
- crash due to read/write unmapped memory (this crash was also reported
when using openssl afalg engine)

Rework interrupt management, interrupts are masked as soon as they are
no more used: if input buffer is fully consumed, "Input FIFO not full"
interrupt is masked and if output buffer is full, "Output FIFO not
empty" interrupt is masked.
And crypto request finish when input *and* outpout buffer are fully
read/write.

About the crash due to unmapped memory, using scatterwalk_copychunks()
that will map and copy each block fix the issue.
Using this api and copying full block will also fix unaligned data
access, avoid early copy of in/out buffer, and make useless the extra
alignment constraint.

Fixes: 9e054ec2 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Reported-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 1f6151b0774be73a747c8ed95d482d20d2d13daf
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1f6151b0774be73a747c8ed95d482d20d2d13daf

--------------------------------

[ Upstream commit fa97dc2d ]

This fixes the lrw autotest if lrw uses the CRYP as the AES block cipher
provider (as ecb(aes)). At end of request, CRYP should not update the IV
in case of ECB chaining mode. Indeed the ECB chaining mode never uses
the IV, but the software LRW chaining mode uses the IV field as
a counter and due to the (unexpected) update done by CRYP while the AES
block process, the counter get a wrong value when the IV overflow.

Fixes: 5f49f18d ("crypto: stm32/cryp - update to return iv_out")
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 2bd40e3a3aa2e58d9ec0e4fec3a511c7e053649d
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2bd40e3a3aa2e58d9ec0e4fec3a511c7e053649d

--------------------------------

[ Upstream commit 6c12e742 ]

Delete extraneous lines in probe error handling code: pm was
disabled twice.

Fixes: 65f9aa36 ("crypto: stm32/cryp - Add power management support")
Reported-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 533af1621d1c8f89b61593f88b7e0b30592e3013
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=533af1621d1c8f89b61593f88b7e0b30592e3013

--------------------------------

[ Upstream commit 39e6e699 ]

Some auto tests failed because driver wasn't returning the expected
error with some input size/iv value/tag size.
Now:
 Return 0 early for empty buffer. (We don't need to start the engine for
 an empty input buffer).
 Accept any valid authsize for gcm(aes).
 Return -EINVAL if iv for ccm(aes) is invalid.
 Return -EINVAL if buffer size is a not a multiple of algorithm block size.

Fixes: 9e054ec2 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 5deb24e50372357cf975e85067f09a57ad33dc99
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5deb24e50372357cf975e85067f09a57ad33dc99

--------------------------------

[ Upstream commit d703c7a9 ]

Don't erase key:
If key is erased before the crypto_finalize_.*_request() call, some
pending process will run with a key={ 0 }.
Moreover if the key is reset at end of request, it breaks xts chaining
mode, as for last xts block (in case input len is not a multiple of
block) a new AES request is started without calling again set_key().

Fixes: 9e054ec2 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit e9e0dd5da8ca4623e30ab1abd67882ddcda05050
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e9e0dd5da8ca4623e30ab1abd67882ddcda05050

--------------------------------

[ Upstream commit 41c76690 ]

STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as
a workaround, at each block the current IV is saved, if the saved IV
lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set
in hardware.
Fixes: bbb28326 ("crypto: stm32 - Fix sparse warnings")
Signed-off-by: NNicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit c40b1bc851e0816f45520f31b44e8461de13fc5c
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c40b1bc851e0816f45520f31b44e8461de13fc5c

--------------------------------

[ Upstream commit 81064c96 ]

This patch changes the cast in stm32_cryp_check_ctr_counter from
u32 to __be32 to match the prototype of stm32_cryp_hw_write_iv
correctly.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 93033bbbdc25c2168261846a84b5ba2b2475c995
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=93033bbbdc25c2168261846a84b5ba2b2475c995

--------------------------------

[ Upstream commit 3abedf46 ]

Test can fail either immediately when ASSERT() failed or at the
end if one or more EXPECT() was not met. The exact return code
is decided based on the number of successful ASSERT()s.

If test has no ASSERT()s, however, the return code will be 0,
as if the test did not fail. Start counting ASSERT()s from 1.

Fixes: 369130b6 ("selftests: Enhance kselftest_harness.h to print which assert failed")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit f568fd97d7515f1f3c3efeb604927a3526bff7ba
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f568fd97d7515f1f3c3efeb604927a3526bff7ba

--------------------------------

[ Upstream commit a531b0c2 ]

Building selftests/clone3 with clang warns about enumeration not handled
in switch case:

clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch]
        switch (test_mode) {
                ^

Add the missing switch case with a comment.

Fixes: 17a81069 ("selftests: add tests for clone3()")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Acked-by: NChristian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit d21b47c607379c50924f961ea45cdb7702bf8007
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d21b47c607379c50924f961ea45cdb7702bf8007

--------------------------------

[ Upstream commit 61646ca8 ]

When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:

./arch/x86/include/asm/uaccess.h:317:23: warning: statement will never be executed [-Wswitch-unreachable]
  317 |         unsigned char x_u8__; \
      |                       ^~~~~~

Fixes: 865c50e1 ("x86/uaccess: utilize CONFIG_CC_HAS_ASM_GOTO_OUTPUT")
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211209043456.1377875-1-keescook@chromium.orgSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 3e801ea43c4b81a32e2a72cd102ad60783b5f07e
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3e801ea43c4b81a32e2a72cd102ad60783b5f07e

--------------------------------

[ Upstream commit 7770a39d ]

copy_user_offload() will actually push a struct struct xfrm_user_offload,
which is different than (struct xfrm_state *)->xso
(struct xfrm_state_offload)

Fixes: d77e38e6 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit b87034d7a2a85267d13d1306841feacca0e4d8b0
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b87034d7a2a85267d13d1306841feacca0e4d8b0

--------------------------------

[ Upstream commit 1b8bb891 ]

Quoting Jia-Ju Bai <baijiaju1990@gmail.com>:

  mwifiex_dequeue_tx_packet()
     spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 1432 (Lock A)
     mwifiex_send_addba()
       spin_lock_bh(&priv->sta_list_spinlock); --> Line 608 (Lock B)

  mwifiex_process_sta_tx_pause()
     spin_lock_bh(&priv->sta_list_spinlock); --> Line 398 (Lock B)
     mwifiex_update_ralist_tx_pause()
       spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 941 (Lock A)

Similar report for mwifiex_process_uap_tx_pause().

While the locking expectations in this driver are a bit unclear, the
Fixed commit only intended to protect the sta_ptr, so we can drop the
lock as soon as we're done with it.

IIUC, this deadlock cannot actually happen, because command event
processing (which calls mwifiex_process_sta_tx_pause()) is
sequentialized with TX packet processing (e.g.,
mwifiex_dequeue_tx_packet()) via the main loop (mwifiex_main_process()).
But it's good not to leave this potential issue lurking.

Fixes: f0f7c227 ("mwifiex: minor cleanups w/ sta_list_spinlock in cfg80211.c")
Cc: Douglas Anderson <dianders@chromium.org>
Reported-by: NTOTE Robot <oslab@tsinghua.edu.cn>
Link: https://lore.kernel.org/linux-wireless/0e495b14-efbb-e0da-37bd-af6bd677ee2c@gmail.com/Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YaV0pllJ5p/EuUat@google.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 0836f9404017ef06bdb725818045b960c8f40ca0
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0836f9404017ef06bdb725818045b960c8f40ca0

--------------------------------

[ Upstream commit 81f6d49c ]

Expedited RCU grace periods invoke sync_rcu_exp_select_node_cpus(), which
takes two passes over the leaf rcu_node structure's CPUs.  The first
pass gathers up the current CPU and CPUs that are in dynticks idle mode.
The workqueue will report a quiescent state on their behalf later.
The second pass sends IPIs to the rest of the CPUs, but excludes the
current CPU, incorrectly assuming it has been included in the first
pass's list of CPUs.

Unfortunately the current CPU may have changed between the first and
second pass, due to the fact that the various rcu_node structures'
->lock fields have been dropped, thus momentarily enabling preemption.
This means that if the second pass's CPU was not on the first pass's
list, it will be ignored completely.  There will be no IPI sent to
it, and there will be no reporting of quiescent states on its behalf.
Unfortunately, the expedited grace period will nevertheless be waiting
for that CPU to report a quiescent state, but with that CPU having no
reason to believe that such a report is needed.

The result will be an expedited grace period stall.

Fix this by no longer excluding the current CPU from consideration during
the second pass.

Fixes: b9ad4d6e ("rcu: Avoid self-IPI in sync_rcu_exp_select_node_cpus()")
Reviewed-by: NNeeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: NPaul E. McKenney <paulmck@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 027165c491e49109c75bbb7bc877a2f83583754d
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=027165c491e49109c75bbb7bc877a2f83583754d

--------------------------------

[ Upstream commit 53d22794 ]

Let's select RATIONAL with dp driver. avoid like:

[...]
x86_64-linux-gnu-ld: drivers/gpu/drm/msm/dp/dp_catalog.o: in function `dp_catalog_ctrl_config_msa':
dp_catalog.c:(.text+0x57e): undefined reference to `rational_best_approximation'

Fixes: c943b494 ("drm/msm/dp: add displayPort driver support")
Reported-by: Nkernelbot <kernel-bot@kylinos.cn>
Signed-off-by: NJackie Liu <liuyun01@kylinos.cn>
Link: https://lore.kernel.org/r/20211110070950.3355597-2-liu.yun@linux.devSigned-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 268f35245650b7135be7b3016ee1b2bf297e883d
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=268f35245650b7135be7b3016ee1b2bf297e883d

--------------------------------

[ Upstream commit 9b58e976 ]

When rt_runtime is modified from -1 to a valid control value, it may
cause the task to be throttled all the time. Operations like the following
will trigger the bug. E.g:

  1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us
  2. Run a FIFO task named A that executes while(1)
  3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us

When rt_runtime is -1, The rt period timer will not be activated when task
A enqueued. And then the task will be throttled after setting rt_runtime to
950,000. The task will always be throttled because the rt period timer is
not activated.

Fixes: d0b27fa7 ("sched: rt-group: synchonised bandwidth period")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NLi Hua <hucool.lihua@huawei.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203033618.11895-1-hucool.lihua@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

hulk inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9
CVE: NA

---------------------------

This reverts commit 4bc4fc93.
Revert this commit and apply patch in 5.10.94 LTS.
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit bb0579ab507707fdcb8ea8afeccaee5b1b71be36
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bb0579ab507707fdcb8ea8afeccaee5b1b71be36

--------------------------------

[ Upstream commit f973795a ]

In iwl_txq_dyn_alloc_dma, txq->tfds is freed at first time by:
iwl_txq_alloc()->goto err_free_tfds->dma_free_coherent(). But
it forgot to set txq->tfds to NULL.

Then the txq->tfds is freed again in iwl_txq_dyn_alloc_dma by:
goto error->iwl_txq_gen2_free_memory()->dma_free_coherent().

My patch sets txq->tfds to NULL after the first free to avoid the
double free.

Fixes: 0cd1ad2d ("iwlwifi: move all bus-independent TX functions to common code")
Signed-off-by: NLv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210403054755.4781-1-lyl2019@mail.ustc.edu.cnSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit b4b911b1648cb8c4871c92d9e9b3c90d3e5ae7ae
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b4b911b1648cb8c4871c92d9e9b3c90d3e5ae7ae

--------------------------------

[ Upstream commit a6441ea2 ]

Commit e955f959 ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:

[  312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  312.264334] si2157 16-0060: firmware version: 3.0.5
[  342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  342.295743] si2157 16-0060: firmware version: 3.0.5
[  372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[  372.385035] si2157 16-0060: firmware version: 3.0.5

Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.

Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.

Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03

Fixes: e955f959 ("media: si2157: Better check for running tuner in init")
Reported-by: NRobert Schlabbach <robert_s@gmx.net>
Signed-off-by: NRobert Schlabbach <robert_s@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 7009a5fbc589484c1b6e6e5ed1c47b64b62c5769
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7009a5fbc589484c1b6e6e5ed1c47b64b62c5769

--------------------------------

[ Upstream commit 0407c49e ]

In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().

Fix this bug by adding a check of saa7146_vv_init().

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 03b1930e ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: NZhou Qingyang <zhou1615@umn.edu>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit df79d2bf95e0b490ad72f46d4b58581bd8f6fc7b
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=df79d2bf95e0b490ad72f46d4b58581bd8f6fc7b

--------------------------------

[ Upstream commit 8dbdcc72 ]

In dib8000_init(), the variable fe is not freed or passed out on the
failure of dib8000_identify(&state->i2c), which could lead to a memleak.

Fix this bug by adding a kfree of fe in the error path.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DVB_DIB8000=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 77e2c0f5 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000")
Signed-off-by: NZhou Qingyang <zhou1615@umn.edu>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 69e402a985418d5fc609730f5f8a81ca514bb823
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=69e402a985418d5fc609730f5f8a81ca514bb823

--------------------------------

[ Upstream commit db52f572 ]

Branch data available to BPF programs can be very useful to get stack traces
out of userspace application.

Commit fff7b643 ("bpf: Add bpf_read_branch_records() helper") added BPF
support to capture branch records in x86. Enable this feature also for other
architectures as well by removing checks specific to x86.

If an architecture doesn't support branch records, bpf_read_branch_records()
still has appropriate checks and it will return an -EINVAL in that scenario.
Based on UAPI helper doc in include/uapi/linux/bpf.h, unsupported architectures
should return -ENOENT in such case. Hence, update the appropriate check to
return -ENOENT instead.

Selftest 'perf_branches' result on power9 machine which has the branch stacks
support:

 - Before this patch:

  [command]# ./test_progs -t perf_branches
   #88/1 perf_branches/perf_branches_hw:FAIL
   #88/2 perf_branches/perf_branches_no_hw:OK
   #88 perf_branches:FAIL
  Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED

 - After this patch:

  [command]# ./test_progs -t perf_branches
   #88/1 perf_branches/perf_branches_hw:OK
   #88/2 perf_branches/perf_branches_no_hw:OK
   #88 perf_branches:OK
  Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED

Selftest 'perf_branches' result on power9 machine which doesn't have branch
stack report:

 - After this patch:

  [command]# ./test_progs -t perf_branches
   #88/1 perf_branches/perf_branches_hw:SKIP
   #88/2 perf_branches/perf_branches_no_hw:OK
   #88 perf_branches:OK
  Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED

Fixes: fff7b643 ("bpf: Add bpf_read_branch_records() helper")
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NKajol Jain <kjain@linux.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211206073315.77432-1-kjain@linux.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 924886fa2246d24d0f0f80096300f607f1b7a829
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=924886fa2246d24d0f0f80096300f607f1b7a829

--------------------------------

[ Upstream commit 866de407 ]

BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.

Fixes: 8580ac94 ("bpf: Process in-kernel BTF")
Signed-off-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NYonghong Song <yhs@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211203053001.740945-1-houtao1@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit 218d952160f71bfc85cbad4a4834e0de306e4b77
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=218d952160f71bfc85cbad4a4834e0de306e4b77

--------------------------------

[ Upstream commit c5a2d43e ]

Make BTF log size limit to be the same as the verifier log size limit.
Otherwise tools that progressively increase log size and use the same log
for BTF loading and program loading will be hitting hard to debug EINVAL.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-7-alexei.starovoitov@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit b77ef5b4ead6a17baa1728d98c1f6a4ba1dd44c8
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b77ef5b4ead6a17baa1728d98c1f6a4ba1dd44c8

--------------------------------

[ Upstream commit 014ba44e ]

select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread where the selected CPU is the previous one. For asymmetric CPU
capacity systems, the assumption was that the wakee couldn't have a
bigger utilization during task placement than it used to have during the
last activation. That was not considering uclamp.min which can completely
change between two task activations and as a consequence mandates the
fitness criterion asym_fits_capacity(), even for the exit path described
above.

Fixes: b4c9c9f1 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: NVincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NValentin Schneider <valentin.schneider@arm.com>
Reviewed-by: NDietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211129173115.4006346-1-vincent.donnefort@arm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

 Conflicts:
	kernel/sched/fair.c
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NCheng Jian <cj.chengjian@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.94
commit d7d5b3bc5263cb82c5673e5972aba543f96199fa
bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d7d5b3bc5263cb82c5673e5972aba543f96199fa

--------------------------------

[ Upstream commit 8b4e74cc ]

select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread, where the selected CPU is the previous one. However, the current
condition for this exit path is incomplete. A task can wake up from an
interrupt context (e.g. hrtimer), while a per-CPU kthread is running. A
such scenario would spuriously trigger the special case described above.
Also, a recent change made the idle task like a regular per-CPU kthread,
hence making that situation more likely to happen
(is_per_cpu_kthread(swapper) being true now).

Checking for task context makes sure select_idle_sibling() will not
interpret a wake up from any other context as a wake up by a per-CPU
kthread.

Fixes: 52262ee5 ("sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression")
Signed-off-by: NVincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NVincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: NValentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20211201143450.479472-1-vincent.donnefort@arm.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>