- 11 1月, 2011 13 次提交
-
-
由 Theodore Ts'o 提交于
This fixes a number of places where we used sector_t instead of ext4_lblk_t for logical blocks, which for ext4 are still 32-bit data types. No point wasting space in the ext4_inode_info structure, and requiring 64-bit arithmetic on 32-bit systems, when it isn't necessary. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Remove the short element i_delalloc_reserved_flag from the ext4_inode_info structure and replace it a new bit in i_state_flags. Since we have an ext4_inode_info for every ext4 inode cached in the inode cache, any savings we can produce here is a very good thing from a memory utilization perspective. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Kazuya Mio 提交于
ext4_ext_find_goal() returns an ideal physical block number that the block allocator tries to allocate first. However, if a required file offset is smaller than the existing extent's one, ext4_ext_find_goal() returns a wrong block number because it may overflow at "block - le32_to_cpu(ex->ee_block)". This patch fixes the problem. ext4_ext_find_goal() will also return a wrong block number in case a file offset of the existing extent is too big. In this case, the ideal physical block number is fixed in ext4_mb_initialize_context(), so it's no problem. reproduce: # dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 128 67456 128 eof /mnt/mp1/file: 2 extents found # rm -rf /mnt/mp1/tmp # echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc result (linux-2.6.37-rc2 + ext4 patch queue): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 33280 128 1 128 67456 33407 128 eof /mnt/mp1/file: 2 extents found result(apply this patch): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 66560 128 1 128 67456 66687 128 eof /mnt/mp1/file: 2 extents found Signed-off-by: NKazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Namhyung Kim 提交于
Check return value of ext4_journal_get_write_access, ext4_journal_dirty_metadata and ext4_mark_inode_dirty. Move brelse() under 'out_stop' to release bh properly in case of journal error. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Eric Paris 提交于
ext4_ext_migrate() calls ext4_new_inode() and passes 0 instead of a pointer to a struct qstr. This patch uses NULL, to make it obvious to the caller that this was a pointer. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Where the file pointer is available, use ext4_error_file() instead of ext4_error_inode(). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Dan Carpenter 提交于
d_path() returns an ERR_PTR and it doesn't return NULL. This is in ext4_error_file() and no one actually calls ext4_error_file(). Signed-off-by: NDan Carpenter <error27@gmail.com>
-
由 Dan Carpenter 提交于
This is a copy and paste error. The intent was to check "io_page_cachep". We tested "io_page_cachep" earlier. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Wang Sheng-Hui 提交于
Reviewed-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NWang Sheng-Hui <crosslonelyover@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Wang Sheng-Hui 提交于
Signed-off-by: NWang Sheng-Hui <crosslonelyover@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Any time you see code that tries to add error codes together, you should want to claw your eyes out... Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Lukas Czerner 提交于
ext4_issue_discard is supposed to be helper for calling discard, however in case that underlying device does not support discard it prints out the warning message and clears the DISCARD t_mount_opt flag. Since it can be (and is) used by others, it should not do anything and let the caller to handle the error case. This commit removes warning message and flag setting from ext4_issue_discard and use it just in place where it is really needed (release_blocks_on_commit). FITRIM ioctl should not set any flags nor it should print out warning messages, so get rid of the warning as well. Signed-off-by: NLukas Czerner <lczerner@redhat.com>
-
由 Lukas Czerner 提交于
When determining last group through ext4_get_group_no_and_offset() the result may be wrong in cases when range->start and range-len are too big, because it may overflow when summing up those two numbers. Fix that by checking range->len and limit its value to ext4_blocks_count(). This commit was tested by myself with expected result. Signed-off-by: NLukas Czerner <lczerner@redhat.com>
-
- 20 12月, 2010 7 次提交
-
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Joe Perches 提交于
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. In function __ext4_grp_locked_error also added KERN_CONT to some printks. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Eric Sandeen 提交于
When nanosecond timestamp resolution isn't supported on an ext4 partition (inode size = 128), stat() appears to be returning uninitialized garbage in the nanosecond component of timestamps. EXT4_INODE_GET_XTIME should zero out tv_nsec when EXT4_FITS_IN_INODE evaluates to false. Reported-by: NJordan Russell <jr-list-2010@quo.to> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This function gets called a lot for large directories, and the answer is almost always "no, no, there's no problem". This means using unlikely() is a good thing. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jesper Juhl 提交于
Use advantage of kmem_cache_zalloc() to remove a memset() call in ext4_init_io_end() and save a few bytes. Before: [jj@dragon linux-2.6]$ size fs/ext4/page-io.o text data bss dec hex filename 3016 0 624 3640 e38 fs/ext4/page-io.o After: [jj@dragon linux-2.6]$ size fs/ext4/page-io.o text data bss dec hex filename 3000 0 624 3624 e28 fs/ext4/page-io.o Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Tobias Klauser 提交于
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 19 12月, 2010 5 次提交
-
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This is a port to jbd2 of a patch which Namhyung Kim <namhyung@gmail.com> originally made to fs/jbd. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This is a port to jbd2 of a patch which Namhyung Kim <namhyung@gmail.com> originally made to fs/jbd. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This is a port to jbd2 of a patch which Namhyung Kim <namhyung@gmail.com> originally made to fs/jbd. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
'buffer_head' should be 'journal_head' This is a port of a patch which Namhyung Kim <namhyung@gmail.com> made to fs/jbd to jbd2. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 12月, 2010 3 次提交
-
-
由 Theodore Ts'o 提交于
We had an open-coded version of printk_ratelimited(); use the provided abstraction to make the code cleaner and easier to understand. Based on a similar patch for fs/jbd from Namhyung Kim <namhyung@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
printk_ratelimit() is deprecated since it is a global instead of a per-printk ratelimit. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This fixes up some broken argument descriptions that Namhyung Kim had originally submitted for ext3. This fixes the comments that were still applicable in ext4. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 16 12月, 2010 9 次提交
-
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Move the ext4_mount_options structure definition from ext4.h, since it is only used in super.c. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Change clear_opt() and set_opt() to take a superblock pointer instead of a pointer to EXT4_SB(sb)->s_mount_opt. This makes it easier for us to support a second mount option field. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix typo which broke '..' detection in ext4_find_entry() ext4: Turn off multiple page-io submission by default
-
由 Jeremy Fitzhardinge 提交于
Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where this is being used to specify array sizes. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: David Miller <davem@davemloft.net> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Walker 提交于
The MSM main git tree has changed over to this new address. Signed-off-by: NDaniel Walker <dwalker@codeaurora.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tavis Ormandy 提交于
The install_special_mapping routine (used, for example, to setup the vdso) skips the security check before insert_vm_struct, allowing a local attacker to bypass the mmap_min_addr security restriction by limiting the available pages for special mappings. bprm_mm_init() also skips the check, and although I don't think this can be used to bypass any restrictions, I don't see any reason not to have the security check. $ uname -m x86_64 $ cat /proc/sys/vm/mmap_min_addr 65536 $ cat install_special_mapping.s section .bss resb BSS_SIZE section .text global _start _start: mov eax, __NR_pause int 0x80 $ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s $ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o $ ./install_special_mapping & [1] 14303 $ cat /proc/14303/maps 0000f000-00010000 r-xp 00000000 00:00 0 [vdso] 00010000-00011000 r-xp 00001000 00:19 2453665 /home/taviso/install_special_mapping 00011000-ffffe000 rwxp 00000000 00:00 0 [stack] It's worth noting that Red Hat are shipping with mmap_min_addr set to 4096. Signed-off-by: NTavis Ormandy <taviso@google.com> Acked-by: NKees Cook <kees@ubuntu.com> Acked-by: NRobert Swiecki <swiecki@google.com> [ Changed to not drop the error code - akpm ] Reviewed-by: NJames Morris <jmorris@namei.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 12月, 2010 3 次提交
-
-
由 Randy Dunlap 提交于
Add missing header file: arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR' arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: It is likely that WORKER_NOT_RUNNING is true MAINTAINERS: Add workqueue entry workqueue: check the allocation of system_unbound_wq
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: protect against NULL reference when waiting to start a raid10. md: fix bug with re-adding of partially recovered device. md: fix possible deadlock in handling flush requests. md: move code in to submit_flushes. md: remove handling of flush_pending in md_submit_flush_data
-