- 20 10月, 2007 1 次提交
-
-
由 Matt LaPlante 提交于
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Scott Wood 提交于
This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip, based on drivers/i2c/chips/ds1374.c. It supports alarm functionality. Signed-off-by: NScott Wood <scottwood@freescale.com> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2007 2 次提交
-
-
由 Jan Engelhardt 提交于
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
The arm26 port has been in a state where it was far from even compiling for quite some time. Ian Molton agreed with the removal. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2007 2 次提交
-
-
由 Thomas Hommel 提交于
This patch adds support for the Simtek STK17TA8 timekeeping chip. The STK17TA8 is quite similar to the DS1553, but differs in register layout and in various control bits in the registers. I chose to make this a new driver to avoid confusion in the code and to not get lost in #ifdefs. Signed-off-by: NThomas Hommel <thomas.hommel@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Various people have expressed surprise that their modular RTC drivers don't seem to work for initializing the system time at boot. To help avoid such unpleasantness, make the Kconfig text point out that the driver probably needs to be statically linked. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
Both shwdt and rtc-sh are only supported on SH-3 and SH-4 at the moment, don't allow them to break the SH-2 and SH-5 (sh64) builds. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 18 7月, 2007 9 次提交
-
-
由 Tony Lindgren 提交于
Add Texas Instruments TWL92330/Menelaus Power Management chip driver. This includes voltage regulators, Dual slot memory card tranceivers and real-time clock(RTC). The support for RTC is integrated with this driver only; it is not separate module. Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic" (1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too. The battery keeps the RTC active over power off, so once you set clock (rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will behave as expected. Cc: "Jean Delvare" <khali@linux-fr.org> Cc: "Tony Lindgren" <tony@atomide.com> Cc: "David Brownell" <david-b@pacbell.net> Signed-off-by: NTrilok Soni <soni.trilok@gmail.com> Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Bogendoerfer 提交于
RTC driver for Dallas/Maxim DS126 chips used in SNI RM200/RM400 [akpm@linux-foundation.org: cleanups] Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Zhan 提交于
[akpm@linux-foundation.org: x86_64 build fix] [akpm@linux-foundation.org: The acpi guys changed the bin_attribute code] Signed-off-by: NMark Zhan <rongkai.zhan@windriver.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
Add a watchdog driver interface to rtc-m41t80 driver. This is derived from works by Alexander Bigga <ab@mycable.de> Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NAlexander Bigga <ab@mycable.de> Cc: David Brownell <david-b@pacbell.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
This is a new-style i2c driver for ST M41T80 series RTC chip, derived from works by Alexander Bigga <ab@mycable.de> who wrote the original rtc-m41txx.c based on drivers/i2c/chips/m41t00.c driver. This driver supports M41T8[0-4] and M41ST8[457]. The old m41t00 driver supports M41T00, M41T81 and M41T85(M41ST85). While the M41T00 chip is now supported by rtc-ds1307 driver, this driver does not include support for the chip. [akpm@linux-foundation.org: remove bogus `static'] Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NAlexander Bigga <ab@mycable.de> Acked-by: NMark A. Greer <mgreer@mvista.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Minor fix to the Kconfig for RTCs: don't display section headers for I2C or SPI unless they're configured. And depend on SPI_MASTER; having slave support wouldn't help. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alessandro Zummo 提交于
RTC class is mature enough. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hans-Christian Egtvedt 提交于
Tested on the AT32AP7000/ATSTK1000. Driver does only suport time, wake up and a very simple alarm, because of hardware limitations. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 From: David Brownell <david-b@pacbell.net> - Strike some alarm setup code that's no longer needed. (This patch seems to have gotten lost somewhere...) - Make the driver name (and its module alias) match what the platform setup code uses, so the driver can bind and hotplug. [akpm@linux-foundation.org: fix several checkpatch.pl warnings] Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Convert rtc-rs5c372 to be a "new style" I2C driver, and update the Kconfig text to be more complete.. Verified on an OMAP H4 development platform, along with a board init patch to declare its rv5c387a device. Only one defconfig -- powerpc/linkstation -- uses this driver; but several other platforms use it, just without defconfig support. Such platforms need to be converted so (a) their I2C adapter driver supports new-style drivers, and (b) board init code declares this I2C device. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Voipio Riku <Riku.Voipio@movial.fi> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 7月, 2007 1 次提交
-
-
由 Wade Farnsworth 提交于
The powerpc arch uses CONFIG_PPC instead of CONFIG_POWERPC. This fixes drivers/rtc/Kconfig to use the correct config option. Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com> Acked-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 17 5月, 2007 1 次提交
-
-
由 David Brownell 提交于
Make drivers/rtc/Kconfig be clearer about what the various "interfaces" actually mean, by showing path names. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2007 2 次提交
-
-
由 kogiidena 提交于
Correct a compile error and warning. Signed-off-by: Nkogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 10 5月, 2007 1 次提交
-
-
由 Martin Schwidefsky 提交于
Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 5月, 2007 8 次提交
-
-
由 David Sterba 提交于
Fix several typos in help text in Kconfig* files. Signed-off-by: NDavid Sterba <dave@jikos.cz> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Alessandro Zummo 提交于
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
RTC class suspend/resume support, re-initializing the system clock on resume from the clock used to initialize it at boot time. - The reinit-on-resume is hooked to the existing RTC_HCTOSYS config option, on the grounds that a clock good enough for init must also be good enough for re-init. - Inlining a version of the code used by ARM, to save and restore the delta between a selected RTC and the current system wall-clock time. - Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs. This means that systems using those RTCs across suspend/resume will likely want to change their kernel configs to enable RTC_HCTOSYS. If HCTOSYS isn't using a second RTC (with battery?), this changes the system's initial date from Jan 1970 to the epoch this hardware uses: 1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc. This goes on top of the patch series removing "struct class_device" usage from the RTC framework. That's all needed for class suspend()/resume(). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-By: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
This simplifies the RTC procfs support by removing the class_interface that hooks it into the rtc core. If it's configured, then sysfs support is now part of the RTC core, and is never a separate module. It also removes the class_interface hook, now that its last remaining user is gone. (That API is usable only with a "struct class_device".) It's another step towards being able to remove "struct class_device". Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-By: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
This simplifies the RTC sysfs support by removing the class_interface that hooks it into the rtc core. If it's configured, then sysfs support is now part of the RTC core, and is never a separate module. It's another step towards being able to remove "struct class_device". Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-By: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
This simplifies the /dev support by removing a superfluous class_device (the /sys/class/rtc-dev stuff) and the class_interface that hooks it into the rtc core. Accordingly, if it's configured then /dev support is now part of the RTC core, and is never a separate module. It's another step towards being able to remove "struct class_device". [bunk@stusta.de: drivers/rtc/rtc-dev.c should #include "rtc-core.h"] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-By: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dale Farnsworth 提交于
Signed-off-by: NDale Farnsworth.org <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nobuhiro Iwamatsu 提交于
Add an RTC driver for Ricoh RS5C313 RTC chip. [akpm@linux-foundation.org: Zillions of coding-style fixes] [akpm@linux-foundation.org: build fixes] Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Wu, Bryan 提交于
This patch implements the driver necessary use the Analog Devices Blackfin processor's on-chip RTC controller. Signed-off-by: NBryan Wu <bryan.wu@analog.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 3月, 2007 1 次提交
-
-
由 Russell King 提交于
Replace the I2C bus address, as per drivers/acorn/char/pcf8583.c. Also, since this driver also contains Acorn RiscPC specific code for obtaining the current year from the SRAM (and updating the platform specific checksum when writing new data back) this is NOT a platform independent driver. Document it as such, and update the dependencies to reflect this fact. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 2月, 2007 1 次提交
-
-
由 Dave Jones 提交于
This option is useful for all of the X86 subarchs afaik (and especially X86_GENERICARCH). Signed-off-by: NDave Jones <davej@redhat.com> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 1 次提交
-
-
由 David Brownell 提交于
This is an "RTC framework" driver for the "CMOS" RTCs which are standard on PCs and some other platforms. That's MC146818 compatible silicon. Advantages of this vs. drivers/char/rtc.c (use one _or_ the other, only one will be able to claim the RTC irq) include: - This leverages both the new RTC framework and the driver model; both PNPACPI and platform device modes are supported. (A separate patch creates a platform device on PCs where PNPACPI isn't configured.) - It supports common extensions like longer alarms. (A separate patch exports that information from ACPI through platform_data.) - Likewise, system wakeup events use "real driver model support", with policy control via sysfs "wakeup" attributes and and using normal rtc ioctls to manage wakeup. (Patch in the works. The ACPI hooks are known; /proc/acpi/alarm can vanish. Making it work with EFI will be a minor challenge to someone with e.g. a MiniMac.) It's not yet been tested on non-x86 systems, without ACPI, or with HPET. And the RTC framework will surely have teething pains on "mainstream" PC-based systems (though must embedded Linux systems use it heavily), not limited to sorting out the "/dev/rtc0" issue (udev easily tweaked). Also, the ALSA rtctimer code doesn't use the new RTC API. Otherwise, this should be a no-known-regressions replacement for the old drivers/char/rtc.c driver, and should help the non-embedded distros (and the new timekeeping code) start to switch to the framework. Note also that any systems using "rtc-m48t86" are candidates to switch over to this more functional driver; the platform data is different, and the way bytes are read is different, but otherwise those chips should be compatible. [akpm@osdl.org: sparc32 fix] [akpm@osdl.org: sparc64 fix] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Woody Suwalski <woodys@xandros.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 12月, 2006 1 次提交
-
-
由 Andrew Victor 提交于
The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the internal RTC peripheral. This RTC driver is therefore AT91RM9200-specific. This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name of the configuration option. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 12月, 2006 2 次提交
-
-
The real time clocks ds1742 and ds1743 differs only in the size of the nvram. This patch changes the existing ds1742 driver to support also ds1743. The main change is that the nvram size is determined from the resource attached to the device. The patch have benefitted from suggestions from Atsushi Nemeto, who is the author of the ds1742 driver. Signed-off-by: NTorsten Rasmussen Rasmussen <tr@newtec.dk> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This creates a new RTC-framework driver for the RTC/calendar module found in various OMAP1 chips. (OMAP2 and OMAP3 use external RTCs, like those in TI's multifunction PM companion chips.) It's been in the Linux-OMAP tree for several months now, and other trees before that, so it's quite stable. The most notable issue is that the OMAP IRQ code doesn't yet support the RTC IRQ as a wakeup event. Once that's fixed, a patch will be needed. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 10月, 2006 1 次提交
-
-
由 David Brownell 提交于
Small updates to make the RTC class Kconfig text be more informative. This should help folk used to the drivers/char/rtc.c support, or a single RTC, be slightly less surprised by the differences. Also, adds a new RTC_DEBUG option to predefine DEBUG in the framework and its drivers, while debugging. That's getting to be a standard idiom, and it's pretty useful. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 9月, 2006 1 次提交
-
-
由 Pavel Machek 提交于
Fix simple typo in RTC_HCTOSYS option. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 9月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
This replaces the old SH RTC driver, and allows us to clean quite a lot of things up on the board-specific side. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 15 7月, 2006 1 次提交
-
-
由 Herbert Valerio Riedel 提交于
Add support for the I2C-attached Intersil ISL1208 RTC chip. [akpm@osdl.org: cleanups, fixlets] Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-