Moving part of the debugging code from IPW_DEBUG to IPW_LL_DEBUG (low level
debugging) and make IPW_DEBUG be always enabled. IPW_LL_DEBUG still needs
to be enabled by selecting CONFIG_IPW2200_DEBUG. But it is highly
deprecated for normal users since it adds higher debug verbosity in driver
hot paths.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Stop processing further but return success when we receive a malformed
packet from the AP. We need this patch to workaround some AP bugs. For
example, the beacon frames from the Orinoco AP1000 contains an IE (value
= 128) with length equals to 8 but the actual frame length is only 7.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The IEEE80211 TKIP and WEP Tx and Rx paths use the same crypto_tfm to encrypt
and decrypt data. During the encrypt and decrypt process, both of them will
set a new key to crypto_tfm. If they happen on the same time, it will
corrupt the crypto_tfm. Thus users will receive an ICV error or Michael MIC
error. This only likely to happen on SMP box with heavy traffic both on Tx
and Rx. The patch use two sets of crypto_tfms to avoid this problem.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NJackie Wu <jackie.wu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

hard_start_xmit should return a NETIF_TX_FOO error code.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Convert the bitfields in the bcm43xx DMA code to properly
aligned u8 booleans. These flags are accessed in the DMA
hotpath, so it's a good idea to waste a few bytes of memory
for the sake of speed by not requiring masking (and probably
shifting) of the bitfields.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Don't rely on linux/if_arp.h being included by other headers
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

SPARC architecture has been fixed, so it's no longer needed.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add Larry Finger to bcm43xx MAINTAINERS

Remove Michael Buesch and add Larry Finger in the
bcm43xx-softmac MAINTAINERS record.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Calls to bcm43xx_rng_init() and bcm43xx_rng_exit() got
lost due to merge trouble. Re-add them.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This is a rewrite of the bcm43xx DMA engine. It adds support
for >1G of memory (for chips that support the extension bits)
and 64-bit DMA (for chips that support it).
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The airo driver is currently caching a pid for later use, but with the
implementation of containers, pids themselves do not uniquely identify a
task.  The driver is also using kernel_thread() which is deprecated in
drivers.

This patch essentially replaces the kernel_thread() with kthread_create().
It also stores the task_struct of the airo_thread rather than its pid.
Since this introduces a second task_struct in struct airo_info, the patch
renames airo_info.task to airo_info.list_bss_task.

As an extension of these changes, the patch further:

	 - replaces kill_proc() with kthread_stop()
	 - replaces signal_pending() with kthread_should_stop()
	 - removes thread completion synchronisation which is handled by
	   kthread_stop().

[akpm@osdl.org: fix races]
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Javier Achirica <achirica@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Support for Intashield 2 port PCI serial card

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3761/1: fix armv4t breakage after adding thumb interworking to userspace helpers
  [ARM] Add Integrator support for glibc outb() and friends
  [ARM] Move prototype for register_isa_ports to asm/io.h
  [ARM] Arrange for isa.c to use named initialisers
  [ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systems
  [ARM] 3760/1: This patch adds timeouts while working with SSP registers. Such timeouts were en
  [ARM] 3758/1: Preserve signalling NaNs in conversion
  [ARM] 3749/3: Correct VFP single/double conversion emulation
  [ARM] 3748/3: Correct error check in vfp_raise_exceptions

Patch from Lennert Buytenhek

On armv4t systems, we have always compiled the kernel with -march=armv4
instead of -march=armv4t, which means that any use of bx will bomb out.

Commit ba9b5d76 introduced the use of
bx in the kernel, which means we need to compile with -march=armv4t on
armv4t systems now.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the necessary call to register_isa_ports() so that glibc knows
where these are found on Integrator platforms.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Convert isa.c (the glibc interface for emulating ISA IO) to use
named initialisers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Unlike the other tty comment patch this one has code changes.  Specifically
it limits the queue size for a tty to 64K characters (128Kbytes) worst case
even if the tty is ignoring tty->throttle.  This is because certain drivers
don't honour the throttle value correctly, although it is a useful
safeguard anyway.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Doesn't fix them but does show up some interesting areas that need review
and fixing.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix printk format warning:
drivers/cdrom/gscd.c:269: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘unsigned int’
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

None of the other /proc/meminfo lines have a space in the identifier.  This
post-2.6.17 addition has the potential to break existing parsers, so use an
underscore instead (like Committed_AS).

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes the locking error noticed by lockdep:

  =============================================
  [ INFO: possible recursive locking detected ]
  ---------------------------------------------
  init/1 is trying to acquire lock:
   (&sighand->siglock){....}, at: [<c047a78a>] flush_old_exec+0x3ae/0x859

  but task is already holding lock:
   (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859

  other info that might help us debug this:
  2 locks held by init/1:
   #0:  (tasklist_lock){..--}, at: [<c047a76a>] flush_old_exec+0x38e/0x859
   #1:  (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859

  stack backtrace:
   [<c04051e1>] show_trace_log_lvl+0x54/0xfd
   [<c040579d>] show_trace+0xd/0x10
   [<c04058b6>] dump_stack+0x19/0x1b
   [<c043b33a>] __lock_acquire+0x773/0x997
   [<c043bacf>] lock_acquire+0x4b/0x6c
   [<c060630b>] _spin_lock+0x19/0x28
   [<c047a78a>] flush_old_exec+0x3ae/0x859
   [<c0498053>] load_elf_binary+0x4aa/0x1628
   [<c0479cab>] search_binary_handler+0xa7/0x24e
   [<c047b577>] do_execve+0x15b/0x1f9
   [<c04022b4>] sys_execve+0x29/0x4d
   [<c0403faf>] syscall_call+0x7/0xb
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

reiserfs seems to have another locking level layer for the i_mutex due to the
xattrs-are-a-directory thing.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it.

(this has no effect on kernels with lockdep disabled.  On kernels with lockdep
enabled this means that we wont actually disable interrupts, and the warning
message will go away as well.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

  In file included from include/asm/mmzone.h:18,
                   from include/linux/mmzone.h:439,
  <snip>
  include/asm/srat.h:31:2: error: #error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
  make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1

This can happen with CONFIG_NUMA && !CONFIG_ACPI && !CONFIG_X86_NUMAQ
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cpuset_excl_nodes_overlap always returns 0 if current is exiting.  This caused
customer's systems to panic in the OOM killer when processes were having
trouble getting memory for the final put_user in mm_release.  Even though
there were lots of processes to kill.

Change to returning 1 in this case.  This achieves parity with !CONFIG_CPUSETS
case, and was observed to fix the problem.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

register_one_node()'s should be defined under CONFIG_NUMA=n.
fixes following bug.

  CC	  init/version.o
  LD	  init/built-in.o
  LD	  .tmp_vmlinux1
  mm/built-in.o: In function `add_memory': undefined reference to `register_one_node'
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

JBD currently allocates commit and frozen buffers from slabs.  With
CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page
boundary causing IO problems.

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127

So, instead of allocating these from regular slabs - manage allocation from
its own slabs and disable slab debug for these slabs.

[akpm@osdl.org: cleanups]
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the list of cpus allowed to tasks in the top (root) cpuset to
dynamically track what cpus are online, using a CPU hotplug notifier.  Make
this top cpus file read-only.

On systems that have cpusets configured in their kernel, but that aren't
actively using cpusets (for some distros, this covers the majority of
systems) all tasks end up in the top cpuset.

If that system does support CPU hotplug, then these tasks cannot make use
of CPUs that are added after system boot, because the CPUs are not allowed
in the top cpuset.  This is a surprising regression over earlier kernels
that didn't have cpusets enabled.

In order to keep the behaviour of cpusets consistent between systems
actively making use of them and systems not using them, this patch changes
the behaviour of the 'cpus' file in the top (root) cpuset, making it read
only, and making it automatically track the value of cpu_online_map.  Thus
tasks in the top cpuset will have automatic use of hot plugged CPUs allowed
by their cpuset.

Thanks to Anton Blanchard and Nathan Lynch for reporting this problem,
driving the fix, and earlier versions of this patch.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A recent patch broke the ability to do a user-request check of a raid1.
This patch fixes the breakage and also moves a comment that was dislocated
by the same patch.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we
  - shut down a clean array,
  - restart with one (or more) drive(s) missing
  - make some changes
  - pause, so that they array gets marked 'clean',
the event count on the superblock of included drives
will be the same as that of the removed drives.
So adding the removed drive back in will cause it
to be included with no resync.

To avoid this, we only update the eventcount backwards when the array
is not degraded.  In this case there can (should) be no non-connected
drives that we can get confused with, and this is the particular case
where updating-backwards is valuable.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix two compile failures in eventpoll.c code which would happen if
DEBUG_EPOLL is bigger than zero.
Signed-off-by: NMasoud Sharbiani <masouds@google.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here's updated documentation for the relay interface, rewritten to match
the relayfs->relay changes.  It also moves relayfs.txt to relay.txt in the
process.

It includes the changes to relayfs.txt previously posted by Randy Dunlap,
thanks for those.

The relay-apps examples have also been updated to match, and can be found
on the sourceforge relayfs website.
Signed-off-by: NTom Zanussi <zanussi@us.ibm.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An up() is called in kernel/stop_machine.c on failure, and also in the
caller (unconditionally).
Signed-off-by: NZhou Yingchao <yingchao.zhou@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>