__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit()
for generic IP-in-IP processing. However it doesn't make sure that there
is enough headroom to push the header to. That can lead to the panic
cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  158.576725] kernel BUG at net/core/skbuff.c:104!
[  158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  158.620426] RIP: 0010:skb_panic+0xc3/0x100
[  158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286
[  158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000
[  158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18
[  158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19
[  158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66
[  158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68
[  158.666007] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  158.674212] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0
[  158.687228] Call Trace:
[  158.689752]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.694475]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.699141]  skb_push+0x78/0x90
[  158.702344]  __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.706872]  ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre]
[  158.711992]  ? __gre6_xmit+0xd80/0xd80 [ip6_gre]
[  158.716668]  ? debug_check_no_locks_freed+0x210/0x210
[  158.721761]  ? print_irqtrace_events+0x120/0x120
[  158.726461]  ? sched_clock_cpu+0x18/0x210
[  158.730572]  ? sched_clock_cpu+0x18/0x210
[  158.734692]  ? cyc2ns_read_end+0x10/0x10
[  158.738705]  ? skb_network_protocol+0x76/0x200
[  158.743216]  ? netif_skb_features+0x1b2/0x550
[  158.747648]  dev_hard_start_xmit+0x137/0x770
[  158.752010]  sch_direct_xmit+0x2ef/0x5d0
[  158.755992]  ? pfifo_fast_dequeue+0x3fa/0x670
[  158.760460]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  158.765975]  ? __lock_is_held+0xa0/0x160
[  158.770002]  __qdisc_run+0x39e/0xfc0
[  158.773673]  ? _raw_spin_unlock+0x29/0x40
[  158.777781]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  158.782191]  ? sch_direct_xmit+0x5d0/0x5d0
[  158.786372]  ? pfifo_fast_dequeue+0x670/0x670
[  158.790818]  ? __dev_queue_xmit+0x172/0x1770
[  158.795195]  ? preempt_count_sub+0xf/0xd0
[  158.799313]  __dev_queue_xmit+0x410/0x1770
[  158.803512]  ? ___slab_alloc+0x605/0x930
[  158.807525]  ? ___slab_alloc+0x605/0x930
[  158.811540]  ? memcpy+0x34/0x50
[  158.814768]  ? netdev_pick_tx+0x1c0/0x1c0
[  158.818895]  ? __skb_clone+0x2fd/0x3d0
[  158.822712]  ? __copy_skb_header+0x270/0x270
[  158.827079]  ? rcu_read_lock_sched_held+0x93/0xa0
[  158.831903]  ? kmem_cache_alloc+0x344/0x4d0
[  158.836199]  ? skb_clone+0x123/0x230
[  158.839869]  ? skb_split+0x820/0x820
[  158.843521]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  158.848407]  tcf_mirred+0x554/0x930 [act_mirred]
[  158.853104]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  158.860005]  ? __lock_acquire+0x706/0x26e0
[  158.864162]  ? mark_lock+0x13d/0xb40
[  158.867832]  tcf_action_exec+0xcf/0x2a0
[  158.871736]  tcf_classify+0xfa/0x340
[  158.875402]  __netif_receive_skb_core+0x8e1/0x1c60
[  158.880334]  ? nf_ingress+0x500/0x500
[  158.884059]  ? process_backlog+0x347/0x4b0
[  158.888241]  ? lock_acquire+0xd8/0x320
[  158.892050]  ? process_backlog+0x1b6/0x4b0
[  158.896228]  ? process_backlog+0xc2/0x4b0
[  158.900291]  process_backlog+0xc2/0x4b0
[  158.904210]  net_rx_action+0x5cc/0x980
[  158.908047]  ? napi_complete_done+0x2c0/0x2c0
[  158.912525]  ? rcu_read_unlock+0x80/0x80
[  158.916534]  ? __lock_is_held+0x34/0x160
[  158.920541]  __do_softirq+0x1d4/0x9d2
[  158.924308]  ? trace_event_raw_event_irq_handler_exit+0x140/0x140
[  158.930515]  run_ksoftirqd+0x1d/0x40
[  158.934152]  smpboot_thread_fn+0x32b/0x690
[  158.938299]  ? sort_range+0x20/0x20
[  158.941842]  ? preempt_count_sub+0xf/0xd0
[  158.945940]  ? schedule+0x5b/0x140
[  158.949412]  kthread+0x206/0x300
[  158.952689]  ? sort_range+0x20/0x20
[  158.956249]  ? kthread_stop+0x570/0x570
[  158.960164]  ret_from_fork+0x3a/0x50
[  158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110
[  158.988935] ---[ end trace 5af56ee845aa6cc8 ]---
[  158.993641] Kernel panic - not syncing: Fatal exception in interrupt
[  159.000176] Kernel Offset: disabled
[  159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6gretap \
		local 2001:db8:2::1 remote 2001:db8:2::2
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ERSPAN only support version 1 and 2.  When packets send to an
erspan device which does not have proper version number set,
drop the packet.  In real case, we observe multicast packets
sent to the erspan pernet device, erspan0, which does not have
erspan version configured.
Reported-by: NGreg Rose <gvrose8192@gmail.com>
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466

CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1b9/0x29f lib/dump_stack.c:53
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 memcpy+0x37/0x50 mm/kasan/kasan.c:303
 strlcpy include/linux/string.h:300 [inline]
 ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
 ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195
 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
 sock_ioctl+0x47e/0x680 net/socket.c:1015
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 SYSC_ioctl fs/ioctl.c:708 [inline]
 SyS_ioctl+0x24/0x30 fs/ioctl.c:706
 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'tunnel' was already set at the start of ip6erspan_tap_init().

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current logic of flags | TUNNEL_SEQ is always non-zero and hence
sequence numbers are always incremented no matter the setting of the
TUNNEL_SEQ bit.  Fix this by using & instead of |.

Detected by CoverityScan, CID#1466039 ("Operands don't affect result")

Fixes: 77a5196a ("gre: add sequence number for collect md mode.")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch adds skb_cow_header() to ensure enough headroom
at ip6erspan_tunnel_xmit before pushing the erspan header
to the skb.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When users fill in incorrect erspan version number through
the struct erspan_metadata uapi, current code skips pushing
the erspan header but continue pushing the gre header, which
is incorrect.  The patch fixes it by returning error.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch adds the erspan v2 proto in ip6gre_tunnel_lookup
so the erspan v2 tunnel can be found correctly.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0,
ip6tnl0, ip6gre0) are automatically created when the corresponding
module is loaded.

These tunnels are also automatically created when a new network
namespace is created, at a great cost.

In many cases, netns are used for isolation purposes, and these
extra network devices are a waste of resources. We are using
thousands of netns per host, and hit the netns creation/delete
bottleneck a lot. (Many thanks to Kirill for recent work on this)

Add a new sysctl so that we can opt-out from this automatic creation.

Note that these tunnels are still created for the initial namespace,
to be the least intrusive for typical setups.

Tested:
lpk43:~# cat add_del_unshare.sh
for i in `seq 1 40`
do
 (for j in `seq 1 100` ; do  unshare -n /bin/true >/dev/null ; done) &
done
wait

lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net
lpk43:~# time ./add_del_unshare.sh

real	0m37.521s
user	0m0.886s
sys	7m7.084s
lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net
lpk43:~# time ./add_del_unshare.sh

real	0m4.761s
user	0m0.851s
sys	1m8.343s
lpk43:~#
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently GRE sequence number can only be used in native
tunnel mode.  This patch adds sequence number support for
gre collect metadata mode.  RFC2890 defines GRE sequence
number to be specific to the traffic flow identified by the
key.  However, this patch does not implement per-key seqno.
The sequence number is shared in the same tunnel device.
That is, different tunnel keys using the same collect_md
tunnel share single sequence number.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 does path selection for multipath routes deep in the lookup
functions. The next patch adds L4 hash option and needs the skb
for the forward path. To get the skb to the relevant FIB lookup
functions it needs to go through the fib rules layer, so add a
lookup_data argument to the fib_lookup_arg struct.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Determining whether a device is a GRE device is easily done by
inspecting struct net_device.type. However, for the tap variants, the
type is just ARPHRD_ETHER.

Therefore introduce two predicate functions that use netdev_ops to tell
the tap devices.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations are similar to bond_net_ops. Exit method
unregisters all net ip6gre devices, and it looks like another
pernet_operations are not interested in foreign net ip6gre list
or net_generic()->tunnels_wc. Init method registers net device.
So, it's possible to mark them async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an erspan tunnel device receives an erpsan packet with different
tunnel metadata (ex: version, index, hwid, direction), existing code
overwrites the tunnel device's erspan configuration with the received
packet's metadata.  The patch fixes it.

Fixes: 1a66a836 ("gre: add collect_md mode to ERSPAN tunnel")
Fixes: f551c91d ("net: erspan: introduce erspan v2 for ip_gre")
Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode")
Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d350a823 ("net: erspan: create erspan metadata uapi header")
moves the erspan 'version' in front of the 'struct erspan_md2' for
later extensibility reason.  This breaks the existing erspan metadata
extraction code because the erspan_md2 then has a 4-byte offset
to between the erspan_metadata and erspan_base_hdr.  This patch
fixes it.

Fixes: 1a66a836 ("gre: add collect_md mode to ERSPAN tunnel")
Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode")
Fixes: 1d7e2ed2 ("net: erspan: refactor existing erspan code")
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Originally the erspan fields are defined as a group into a __be16 field,
and use mask and offset to access each field.  This is more costly due to
calling ntohs/htons.  The patch changes it to use bitfields.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit b05229f4 ("gre6: Cleanup GREv6 transmit path,
call common GRE functions") moved dev->mtu initialization
from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a
result, the previously set values, before ndo_init(), are
reset in the following cases:

* rtnl_create_link() can update dev->mtu from IFLA_MTU
  parameter.

* ip6gre_tnl_link_config() is invoked before ndo_init() in
  netlink and ioctl setup, so ndo_init() can reset MTU
  adjustments with the lower device MTU as well, dev->mtu
  and dev->hard_header_len.

  Not applicable for ip6gretap because it has one more call
  to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init().

Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]'
parameter if a user sets it manually on a device creation,
and fix the second one by moving ip6gre_tnl_link_config()
call after register_netdevice().

Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions")
Fixes: db2ec95d ("ip6_gre: Fix MTU setting")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'md' is allocated from 'tun_dst = ip_tun_rx_dst' and
since we've checked 'tun_dst', 'md' will never be NULL.
The patch removes it at both ipv4 and ipv6 erspan.

Fixes: afb4c97d ("ip6_gre: fix potential memory leak in ip6erspan_rcv")
Fixes: 50670b6e ("ip_gre: fix potential memory leak in erspan_rcv")
Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When ip6gre is created using ioctl, its features, such as
scatter-gather, GSO and tx-checksumming will be turned off:

  # ip -f inet6 tunnel add gre6 mode ip6gre remote fd00::1
  # ethtool -k gre6 (truncated output)
    tx-checksumming: off
    scatter-gather: off
    tcp-segmentation-offload: off
    generic-segmentation-offload: off [requested on]

But when netlink is used, they will be enabled:
  # ip link add gre6 type ip6gre remote fd00::1
  # ethtool -k gre6 (truncated output)
    tx-checksumming: on
    scatter-gather: on
    tcp-segmentation-offload: on
    generic-segmentation-offload: on

This results in a loss of performance when gre6 is created via ioctl.
The issue was found with LTP/gre tests.

Fix it by moving the setup of device features to a separate function
and invoke it with ndo_init callback because both netlink and ioctl
will eventually call it via register_netdevice():

   register_netdevice()
       - ndo_init() callback -> ip6gre_tunnel_init() or ip6gre_tap_init()
           - ip6gre_tunnel_init_common()
                - ip6gre_tnl_init_features()

The moved code also contains two minor style fixes:
  * removed needless tab from GRE6_FEATURES on NETIF_F_HIGHDMA line.
  * fixed the issue reported by checkpatch: "Unnecessary parentheses around
    'nt->encap.type == TUNNEL_ENCAP_NONE'"

Fixes: ac4eb009 ("ip6gre: Add support for basic offloads offloads excluding GSO")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If md is NULL, tun_dst must be freed, otherwise it will cause memory
leak.

Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same as ipv4 code, when ip6erspan_rcv call return PACKET_REJECT, we
should call icmpv6_send to send icmp unreachable message in error path.

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Acked-by: NWilliam Tu <u9012063@gmail.com>
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pskb_may_pull() can change skb->data, so we need to load ipv6h/ershdr at
the right place.

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Cc: William Tu <u9012063@gmail.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The same fix as the patch "ip_gre: remove the incorrect mtu limit for
ipgre tap" is also needed for ip6_gre.

Fixes: 61e84623 ("net: centralize net_device min/max MTU checking")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pskb_may_pull() can change skb->data, so we need to re-load pkt_md
and ershdr at the right place.

Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Fixes: f551c91d ("net: erspan: introduce erspan v2 for ip_gre")
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If pskb_may_pull return failed, return PACKET_REJECT
instead of -ENOMEM.

Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
Fixes: f551c91d ("net: erspan: introduce erspan v2 for ip_gre")
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to support for ipv4 erspan, this patch adds
erspan v2 to ip6erspan tunnel.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch refactors the existing erspan implementation in order
to support erspan version 2, which has additional metadata.  So, in
stead of having one 'struct erspanhdr' holding erspan version 1,
breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to ip6 gretap and ip4 gretap, the patch allows
erspan tunnel to operate in collect metadata mode.
bpf_skb_[gs]et_tunnel_key() helpers can make use of
it right away.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to gre, vxlan, geneve, ipip tunnels, allow ip6 gre and gretap
tunnels to operate in collect metadata mode.  bpf_skb_[gs]et_tunnel_key()
helpers can make use of it right away.  OVS can use it as well in the
future.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch adds support for ERSPAN tunnel over ipv6.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch refactors the ip6gre_xmit_{ipv4, ipv6}.
It is a prep work to add the ip6erspan tunnel.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 308edfdf ("gre6: Cleanup GREv6 receive path, call
common GRE functions") it's not used anywhere in the module, but
previously was used in ip6gre_rcv().

Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now ip6gre processes toobig icmp packet by setting gre dev's mtu in
ip6gre_err, which would cause few things not good:

  - It couldn't set mtu with dev_set_mtu due to it's not in user context,
    which causes route cache and idev->cnf.mtu6 not to be updated.

  - It has to update sk dst pmtu in tx path according to gredev->mtu for
    ip6gre, while it updates pmtu again according to lower dst pmtu in
    ip6_tnl_xmit.

  - To change dev->mtu by toobig icmp packet is not a good idea, it should
    only work on pmtu.

This patch is to process toobig by updating the lower dst's pmtu, as later
sk dst pmtu will be updated in ip6_tnl_xmit, the same way as in ip4gre.

Note that gre dev's mtu will not be updated any more, it doesn't make any
sense to change dev's mtu after receiving a toobig packet.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to add redirect icmp packet process for ip6gre by
calling ip6_redirect() in ip6gre_err(), as in vti6_err.

Prior to this patch, there's even no route cache generated after
receiving redirect.
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When receiving a Toobig icmpv6 packet, ip6gre_err would just set
tunnel dev's mtu, that's not enough. For skb_dst(skb)'s pmtu may
still be using the old value, it has no chance to be updated with
tunnel dev's mtu.

Jianlin found this issue by reducing route's mtu while running
netperf, the performance went to 0.

ip6ip6 and ip4ip6 tunnel can work well with this, as they lookup
the upper dst and update_pmtu it's pmtu or icmpv6_send a Toobig
to upper socket after setting tunnel dev's mtu.

We couldn't do that for ip6_gre, as gre's inner packet could be
any protocol, it's difficult to handle them (like lookup upper
dst) in a good way.

So this patch is to fix it by updating skb_dst(skb)'s pmtu when
dev->mtu < skb_dst(skb)'s pmtu in tx path. It's safe to do this
update there, as usually dev->mtu <= skb_dst(skb)'s pmtu and no
performance regression can be caused by this.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The similar fix in patch 'ipip: only increase err_count for some
certain type icmp in ipip_err' is needed for ip6gre_err.

In Jianlin's case, udp netperf broke even when receiving a TooBig
icmpv6 packet.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch 'ip_gre: ipgre_tap device should keep dst' fixed
a issue that ipgre_tap mtu couldn't be updated in tx path.

The same fix is needed for ip6gre_tap as well.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement exit_batch() method to dismantle more devices
per round.

(rtnl_lock() ...
 unregister_netdevice_many() ...
 rtnl_unlock())

Tested:
$ cat add_del_unshare.sh
for i in `seq 1 40`
do
 (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) &
done
wait ; grep net_namespace /proc/slabinfo

Before patch :
$ time ./add_del_unshare.sh
net_namespace        110    267   5504    1    2 : tunables    8    4    0 : slabdata    110    267      0

real    3m25.292s
user    0m0.644s
sys     0m40.153s

After patch:

$ time ./add_del_unshare.sh
net_namespace        126    282   5504    1    2 : tunables    8    4    0 : slabdata    126    282      0

real	1m38.965s
user	0m0.688s
sys	0m37.017s
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now in ip6gre_header before packing the ipv6 header, it skb_push t->hlen
which only includes encap_hlen + tun_hlen. It means greh and inner header
would be over written by ipv6 stuff and ipv6h might have no chance to set
up.

Jianlin found this issue when using remote any on ip6_gre, the packets he
captured on gre dev are truncated:

22:50:26.210866 Out ethertype IPv6 (0x86dd), length 120: truncated-ip6 -\
8128 bytes missing!(flowlabel 0x92f40, hlim 0, next-header Options (0)  \
payload length: 8192) ::1:2000:0 > ::1:0:86dd: HBH [trunc] ip-proto-128 \
8184

It should also skb_push ipv6hdr so that ipv6h points to the right position
to set ipv6 stuff up.

This patch is to skb_push hlen + sizeof(*ipv6h) and also fix some indents
in ip6gre_header.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>