Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 10 12月, 2019 3 次提交
    • S
      selinux: fall back to ref-walk if audit is required · 0188d5c0
      由 Stephen Smalley 提交于 
      commit bda0be7a ("security: make inode_follow_link RCU-walk aware")
passed down the rcu flag to the SELinux AVC, but failed to adjust the
test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY.
Previously, we only returned -ECHILD if generating an audit record with
LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission.
Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined
equivalent in selinux_inode_permission() immediately after we determine
that audit is required, and always fall back to ref-walk in this case.

Fixes: bda0be7a ("security: make inode_follow_link RCU-walk aware")
Reported-by: NWill Deacon <will@kernel.org>
Suggested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      0188d5c0
    • S
      selinux: revert "stop passing MAY_NOT_BLOCK to the AVC upon follow_link" · 1a37079c
      由 Stephen Smalley 提交于 
      This reverts commit e46e01ee ("selinux: stop passing MAY_NOT_BLOCK
to the AVC upon follow_link"). The correct fix is to instead fall
back to ref-walk if audit is required irrespective of the specific
audit data type.  This is done in the next commit.

Fixes: e46e01ee ("selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link")
Reported-by: NWill Deacon <will@kernel.org>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      1a37079c
    • S
      security,lockdown,selinux: implement SELinux lockdown · 59438b46
      由 Stephen Smalley 提交于 
      Implement a SELinux hook for lockdown.  If the lockdown module is also
enabled, then a denial by the lockdown module will take precedence over
SELinux, so SELinux can only further restrict lockdown decisions.
The SELinux hook only distinguishes at the granularity of integrity
versus confidentiality similar to the lockdown module, but includes the
full lockdown reason as part of the audit record as a hint in diagnosing
what triggered the denial.  To support this auditing, move the
lockdown_reasons[] string array from being private to the lockdown
module to the security framework so that it can be used by the lsm audit
code and so that it is always available even when the lockdown module
is disabled.

Note that the SELinux implementation allows the integrity and
confidentiality reasons to be controlled independently from one another.
Thus, in an SELinux policy, one could allow operations that specify
an integrity reason while blocking operations that specify a
confidentiality reason. The SELinux hook implementation is
stricter than the lockdown module in validating the provided reason value.

Sample AVC audit output from denials:
avc:  denied  { integrity } for pid=3402 comm="fwupd"
 lockdown_reason="/dev/mem,kmem,port" scontext=system_u:system_r:fwupd_t:s0
 tcontext=system_u:system_r:fwupd_t:s0 tclass=lockdown permissive=0

avc:  denied  { confidentiality } for pid=4628 comm="cp"
 lockdown_reason="/proc/kcore access"
 scontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023
 tcontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023
 tclass=lockdown permissive=0
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: NJames Morris <jamorris@linux.microsoft.com>
[PM: some merge fuzz do the the perf hooks]
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      59438b46
  3. 27 11月, 2019 1 次提交
    • M
      net: port < inet_prot_sock(net) --> inet_port_requires_bind_service(net, port) · 82f31ebf
      由 Maciej Żenczykowski 提交于 
      Note that the sysctl write accessor functions guarantee that:
  net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.

ie. even though
  if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
  if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
  if (snum < low || snum > high) {
which is equivalent to:
  if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.

But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).

Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      82f31ebf
  5. 15 11月, 2019 1 次提交
  7. 18 10月, 2019 1 次提交
    • J
      perf_event: Add support for LSM and SELinux checks · da97e184
      由 Joel Fernandes (Google) 提交于 
      In current mainline, the degree of access to perf_event_open(2) system
call depends on the perf_event_paranoid sysctl.  This has a number of
limitations:

1. The sysctl is only a single value. Many types of accesses are controlled
   based on the single value thus making the control very limited and
   coarse grained.
2. The sysctl is global, so if the sysctl is changed, then that means
   all processes get access to perf_event_open(2) opening the door to
   security issues.

This patch adds LSM and SELinux access checking which will be used in
Android to access perf_event_open(2) for the purposes of attaching BPF
programs to tracepoints, perf profiling and other operations from
userspace. These operations are intended for production systems.

5 new LSM hooks are added:
1. perf_event_open: This controls access during the perf_event_open(2)
   syscall itself. The hook is called from all the places that the
   perf_event_paranoid sysctl is checked to keep it consistent with the
   systctl. The hook gets passed a 'type' argument which controls CPU,
   kernel and tracepoint accesses (in this context, CPU, kernel and
   tracepoint have the same semantics as the perf_event_paranoid sysctl).
   Additionally, I added an 'open' type which is similar to
   perf_event_paranoid sysctl == 3 patch carried in Android and several other
   distros but was rejected in mainline [1] in 2016.

2. perf_event_alloc: This allocates a new security object for the event
   which stores the current SID within the event. It will be useful when
   the perf event's FD is passed through IPC to another process which may
   try to read the FD. Appropriate security checks will limit access.

3. perf_event_free: Called when the event is closed.

4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event.

5. perf_event_write: Called from the ioctl(2) syscalls for the event.

[1] https://lwn.net/Articles/696240/

Since Peter had suggest LSM hooks in 2016 [1], I am adding his
Suggested-by tag below.

To use this patch, we set the perf_event_paranoid sysctl to -1 and then
apply selinux checking as appropriate (default deny everything, and then
add policy rules to give access to domains that need it). In the future
we can remove the perf_event_paranoid sysctl altogether.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Co-developed-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NJames Morris <jmorris@namei.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: rostedt@goodmis.org
Cc: Yonghong Song <yhs@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: jeffv@google.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: primiano@google.com
Cc: Song Liu <songliubraving@fb.com>
Cc: rsavitski@google.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Matthew Garrett <matthewgarrett@google.com>
Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
      da97e184
  9. 01 10月, 2019 1 次提交
    • J
      selinux: allow labeling before policy is loaded · 3e3e24b4
      由 Jonathan Lebon 提交于 
      Currently, the SELinux LSM prevents one from setting the
`security.selinux` xattr on an inode without a policy first being
loaded. However, this restriction is problematic: it makes it impossible
to have newly created files with the correct label before actually
loading the policy.

This is relevant in distributions like Fedora, where the policy is
loaded by systemd shortly after pivoting out of the initrd. In such
instances, all files created prior to pivoting will be unlabeled. One
then has to relabel them after pivoting, an operation which inherently
races with other processes trying to access those same files.

Going further, there are use cases for creating the entire root
filesystem on first boot from the initrd (e.g. Container Linux supports
this today[1], and we'd like to support it in Fedora CoreOS as well[2]).
One can imagine doing this in two ways: at the block device level (e.g.
laying down a disk image), or at the filesystem level. In the former,
labeling can simply be part of the image. But even in the latter
scenario, one still really wants to be able to set the right labels when
populating the new filesystem.

This patch enables this by changing behaviour in the following two ways:
1. allow `setxattr` if we're not initialized
2. don't try to set the in-core inode SID if we're not initialized;
   instead leave it as `LABEL_INVALID` so that revalidation may be
   attempted at a later time

Note the first hunk of this patch is mostly the same as a previously
discussed one[3], though it was part of a larger series which wasn't
accepted.

[1] https://coreos.com/os/docs/latest/root-filesystem-placement.html
[2] https://github.com/coreos/fedora-coreos-tracker/issues/94
[3] https://www.spinics.net/lists/linux-initramfs/msg04593.htmlCo-developed-by: NVictor Kamensky <kamensky@cisco.com>
Signed-off-by: NVictor Kamensky <kamensky@cisco.com>
Signed-off-by: NJonathan Lebon <jlebon@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      3e3e24b4
  11. 05 9月, 2019 1 次提交
  13. 13 8月, 2019 1 次提交
    • A
      fanotify, inotify, dnotify, security: add security hook for fs notifications · ac5656d8
      由 Aaron Goidel 提交于 
      As of now, setting watches on filesystem objects has, at most, applied a
check for read access to the inode, and in the case of fanotify, requires
CAP_SYS_ADMIN. No specific security hook or permission check has been
provided to control the setting of watches. Using any of inotify, dnotify,
or fanotify, it is possible to observe, not only write-like operations, but
even read access to a file. Modeling the watch as being merely a read from
the file is insufficient for the needs of SELinux. This is due to the fact
that read access should not necessarily imply access to information about
when another process reads from a file. Furthermore, fanotify watches grant
more power to an application in the form of permission events. While
notification events are solely, unidirectional (i.e. they only pass
information to the receiving application), permission events are blocking.
Permission events make a request to the receiving application which will
then reply with a decision as to whether or not that action may be
completed. This causes the issue of the watching application having the
ability to exercise control over the triggering process. Without drawing a
distinction within the permission check, the ability to read would imply
the greater ability to control an application. Additionally, mount and
superblock watches apply to all files within the same mount or superblock.
Read access to one file should not necessarily imply the ability to watch
all files accessed within a given mount or superblock.

In order to solve these issues, a new LSM hook is implemented and has been
placed within the system calls for marking filesystem objects with inotify,
fanotify, and dnotify watches. These calls to the hook are placed at the
point at which the target path has been resolved and are provided with the
path struct, the mask of requested notification events, and the type of
object on which the mark is being set (inode, superblock, or mount). The
mask and obj_type have already been translated into common FS_* values
shared by the entirety of the fs notification infrastructure. The path
struct is passed rather than just the inode so that the mount is available,
particularly for mount watches. This also allows for use of the hook by
pathname-based security modules. However, since the hook is intended for
use even by inode based security modules, it is not placed under the
CONFIG_SECURITY_PATH conditional. Otherwise, the inode-based security
modules would need to enable all of the path hooks, even though they do not
use any of them.

This only provides a hook at the point of setting a watch, and presumes
that permission to set a particular watch implies the ability to receive
all notification about that object which match the mask. This is all that
is required for SELinux. If other security modules require additional hooks
or infrastructure to control delivery of notification, these can be added
by them. It does not make sense for us to propose hooks for which we have
no implementation. The understanding that all notifications received by the
requesting application are all strictly of a type for which the application
has been granted permission shows that this implementation is sufficient in
its coverage.

Security modules wishing to provide complete control over fanotify must
also implement a security_file_open hook that validates that the access
requested by the watching application is authorized. Fanotify has the issue
that it returns a file descriptor with the file mode specified during
fanotify_init() to the watching process on event. This is already covered
by the LSM security_file_open hook if the security module implements
checking of the requested file mode there. Otherwise, a watching process
can obtain escalated access to a file for which it has not been authorized.

The selinux_path_notify hook implementation works by adding five new file
permissions: watch, watch_mount, watch_sb, watch_reads, and watch_with_perm
(descriptions about which will follow), and one new filesystem permission:
watch (which is applied to superblock checks). The hook then decides which
subset of these permissions must be held by the requesting application
based on the contents of the provided mask and the obj_type. The
selinux_file_open hook already checks the requested file mode and therefore
ensures that a watching process cannot escalate its access through
fanotify.

The watch, watch_mount, and watch_sb permissions are the baseline
permissions for setting a watch on an object and each are a requirement for
any watch to be set on a file, mount, or superblock respectively. It should
be noted that having either of the other two permissions (watch_reads and
watch_with_perm) does not imply the watch, watch_mount, or watch_sb
permission. Superblock watches further require the filesystem watch
permission to the superblock. As there is no labeled object in view for
mounts, there is no specific check for mount watches beyond watch_mount to
the inode. Such a check could be added in the future, if a suitable labeled
object existed representing the mount.

The watch_reads permission is required to receive notifications from
read-exclusive events on filesystem objects. These events include accessing
a file for the purpose of reading and closing a file which has been opened
read-only. This distinction has been drawn in order to provide a direct
indication in the policy for this otherwise not obvious capability. Read
access to a file should not necessarily imply the ability to observe read
events on a file.

Finally, watch_with_perm only applies to fanotify masks since it is the
only way to set a mask which allows for the blocking, permission event.
This permission is needed for any watch which is of this type. Though
fanotify requires CAP_SYS_ADMIN, this is insufficient as it gives implicit
trust to root, which we do not do, and does not support least privilege.
Signed-off-by: NAaron Goidel <acgoide@tycho.nsa.gov>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      ac5656d8
  15. 11 7月, 2019 1 次提交
  17. 28 6月, 2019 1 次提交
    • D
      keys: Replace uid/gid/perm permissions checking with an ACL · 2e12256b
      由 David Howells 提交于 
      Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split.  This will also allow a
greater range of subjects to represented.

============
WHY DO THIS?
============

The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.

For SETATTR, this includes actions that are about controlling access to a
key:

 (1) Changing a key's ownership.

 (2) Changing a key's security information.

 (3) Setting a keyring's restriction.

And actions that are about managing a key's lifetime:

 (4) Setting an expiry time.

 (5) Revoking a key.

and (proposed) managing a key as part of a cache:

 (6) Invalidating a key.

Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.

Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission.  It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.

As for SEARCH permission, that currently covers:

 (1) Finding keys in a keyring tree during a search.

 (2) Permitting keyrings to be joined.

 (3) Invalidation.

But these don't really belong together either, since these actions really
need to be controlled separately.

Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.


===============
WHAT IS CHANGED
===============

The SETATTR permission is split to create two new permissions:

 (1) SET_SECURITY - which allows the key's owner, group and ACL to be
     changed and a restriction to be placed on a keyring.

 (2) REVOKE - which allows a key to be revoked.

The SEARCH permission is split to create:

 (1) SEARCH - which allows a keyring to be search and a key to be found.

 (2) JOIN - which allows a keyring to be joined as a session keyring.

 (3) INVAL - which allows a key to be invalidated.

The WRITE permission is also split to create:

 (1) WRITE - which allows a key's content to be altered and links to be
     added, removed and replaced in a keyring.

 (2) CLEAR - which allows a keyring to be cleared completely.  This is
     split out to make it possible to give just this to an administrator.

 (3) REVOKE - see above.


Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together.  An ACE specifies a subject, such as:

 (*) Possessor - permitted to anyone who 'possesses' a key
 (*) Owner - permitted to the key owner
 (*) Group - permitted to the key group
 (*) Everyone - permitted to everyone

Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.

Further subjects may be made available by later patches.

The ACE also specifies a permissions mask.  The set of permissions is now:

	VIEW		Can view the key metadata
	READ		Can read the key content
	WRITE		Can update/modify the key content
	SEARCH		Can find the key by searching/requesting
	LINK		Can make a link to the key
	SET_SECURITY	Can change owner, ACL, expiry
	INVAL		Can invalidate
	REVOKE		Can revoke
	JOIN		Can join this keyring
	CLEAR		Can clear this keyring


The KEYCTL_SETPERM function is then deprecated.

The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.

The KEYCTL_INVALIDATE function then requires INVAL.

The KEYCTL_REVOKE function then requires REVOKE.

The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.

The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.


======================
BACKWARD COMPATIBILITY
======================

To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.

It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.

SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY.  WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR.  JOIN is turned
on if a keyring is being altered.

The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.

It will make the following mappings:

 (1) INVAL, JOIN -> SEARCH

 (2) SET_SECURITY -> SETATTR

 (3) REVOKE -> WRITE if SETATTR isn't already set

 (4) CLEAR -> WRITE

Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.


=======
TESTING
=======

This passes the keyutils testsuite for all but a couple of tests:

 (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
     returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
     if the type doesn't have ->read().  You still can't actually read the
     key.

 (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
     work as Other has been replaced with Everyone in the ACL.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      2e12256b
  19. 19 6月, 2019 1 次提交
  21. 14 6月, 2019 1 次提交
  23. 13 6月, 2019 2 次提交
  25. 12 6月, 2019 1 次提交
  27. 21 5月, 2019 1 次提交
  29. 11 5月, 2019 1 次提交
  31. 09 5月, 2019 1 次提交
  33. 16 4月, 2019 1 次提交
  35. 04 4月, 2019 1 次提交
    • O
      kernfs: fix xattr name handling in LSM helpers · 1537ad15
      由 Ondrej Mosnacek 提交于 
      The implementation of kernfs_security_xattr_*() helpers reuses the
kernfs_node_xattr_*() functions, which take the suffix of the xattr name
and extract full xattr name from it using xattr_full_name(). However,
this function relies on the fact that the suffix passed to xattr
handlers from VFS is always constructed from the full name by just
incerementing the pointer. This doesn't necessarily hold for the callers
of kernfs_security_xattr_*(), so their usage will easily lead to
out-of-bounds access.

Fix this by moving the xattr name reconstruction to the VFS xattr
handlers and replacing the kernfs_security_xattr_*() helpers with more
general kernfs_xattr_*() helpers that take full xattr name and allow
accessing all kernfs node's xattrs.
Reported-by: Nkernel test robot <rong.a.chen@intel.com>
Fixes: b230d5ab ("LSM: add new hook for kernfs node initialization")
Fixes: ec882da5 ("selinux: implement the kernfs_init_security hook")
Signed-off-by: NOndrej Mosnacek <omosnace@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      1537ad15
  37. 23 3月, 2019 1 次提交
  39. 21 3月, 2019 2 次提交
  41. 12 3月, 2019 2 次提交
    • J
      security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock · 3815a245
      由 J. Bruce Fields 提交于 
      In the case when we're reusing a superblock, selinux_sb_clone_mnt_opts()
fails to set set_kern_flags, with the result that
nfs_clone_sb_security() incorrectly clears NFS_CAP_SECURITY_LABEL.

The result is that if you mount the same NFS filesystem twice, NFS
security labels are turned off, even if they would work fine if you
mounted the filesystem only once.

("fixes" may be not exactly the right tag, it may be more like
"fixed-other-cases-but-missed-this-one".)

Cc: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 0b4d3452 "security/selinux: allow security_sb_clone_mnt_opts..."
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      3815a245
    • X
      selinux: add the missing walk_size + len check in selinux_sctp_bind_connect · 292c997a
      由 Xin Long 提交于 
      As does in __sctp_connect(), when checking addrs in a while loop, after
get the addr len according to sa_family, it's necessary to do the check
walk_size + af->sockaddr_len > addrs_size to make sure it won't access
an out-of-bounds addr.

The same thing is needed in selinux_sctp_bind_connect(), otherwise an
out-of-bounds issue can be triggered:

  [14548.772313] BUG: KASAN: slab-out-of-bounds in selinux_sctp_bind_connect+0x1aa/0x1f0
  [14548.927083] Call Trace:
  [14548.938072]  dump_stack+0x9a/0xe9
  [14548.953015]  print_address_description+0x65/0x22e
  [14548.996524]  kasan_report.cold.6+0x92/0x1a6
  [14549.015335]  selinux_sctp_bind_connect+0x1aa/0x1f0
  [14549.036947]  security_sctp_bind_connect+0x58/0x90
  [14549.058142]  __sctp_setsockopt_connectx+0x5a/0x150 [sctp]
  [14549.081650]  sctp_setsockopt.part.24+0x1322/0x3ce0 [sctp]

Cc: stable@vger.kernel.org
Fixes: d452930f ("selinux: Add SCTP support")
Reported-by: NChunyu Hu <chuhu@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      292c997a
  43. 28 2月, 2019 2 次提交
  45. 22 2月, 2019 1 次提交
  47. 19 1月, 2019 1 次提交
  49. 11 1月, 2019 5 次提交
    • O
      selinux: do not override context on context mounts · 53e0c2aa
      由 Ondrej Mosnacek 提交于 
      Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().

This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.

Steps to reproduce:
    # mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
    # chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.threads
    # umount /sys/fs/cgroup/unified
    # mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified

Result before:
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.threads

Result after:
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Signed-off-by: NOndrej Mosnacek <omosnace@redhat.com>
Reviewed-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      53e0c2aa
    • O
      selinux: never allow relabeling on context mounts · a83d6dda
      由 Ondrej Mosnacek 提交于 
      In the SECURITY_FS_USE_MNTPOINT case we never want to allow relabeling
files/directories, so we should never set the SBLABEL_MNT flag. The
'special handling' in selinux_is_sblabel_mnt() is only intended for when
the behavior is set to SECURITY_FS_USE_GENFS.

While there, make the logic in selinux_is_sblabel_mnt() more explicit
and add a BUILD_BUG_ON() to make sure that introducing a new
SECURITY_FS_USE_* forces a review of the logic.

Fixes: d5f3a5f6 ("selinux: add security in-core xattr support for pstore and debugfs")
Signed-off-by: NOndrej Mosnacek <omosnace@redhat.com>
Reviewed-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      a83d6dda
    • S
      selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link · e46e01ee
      由 Stephen Smalley 提交于 
      commit bda0be7a ("security: make inode_follow_link RCU-walk aware")
switched selinux_inode_follow_link() to use avc_has_perm_flags() and
pass down the MAY_NOT_BLOCK flag if called during RCU walk.  However,
the only test of MAY_NOT_BLOCK occurs during slow_avc_audit()
and only if passing an inode as audit data (LSM_AUDIT_DATA_INODE).  Since
selinux_inode_follow_link() passes a dentry directly, passing MAY_NOT_BLOCK
here serves no purpose.  Switch selinux_inode_follow_link() to use
avc_has_perm() and drop avc_has_perm_flags() since there are no other
users.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      e46e01ee
    • S
      selinux: avoid silent denials in permissive mode under RCU walk · 3a28cff3
      由 Stephen Smalley 提交于 
      commit 0dc1ba24 ("SELINUX: Make selinux cache VFS RCU walks safe")
results in no audit messages at all if in permissive mode because the
cache is updated during the rcu walk and thus no denial occurs on
the subsequent ref walk.  Fix this by not updating the cache when
performing a non-blocking permission check.  This only affects search
and symlink read checks during rcu walk.

Fixes: 0dc1ba24 ("SELINUX: Make selinux cache VFS RCU walks safe")
Reported-by: NBMK <bmktuwien@gmail.com>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <paul@paul-moore.com>
      3a28cff3
    • M
      LSM: generalize flag passing to security_capable · c1a85a00
      由 Micah Morton 提交于 
      This patch provides a general mechanism for passing flags to the
security_capable LSM hook. It replaces the specific 'audit' flag that is
used to tell security_capable whether it should log an audit message for
the given capability check. The reason for generalizing this flag
passing is so we can add an additional flag that signifies whether
security_capable is being called by a setid syscall (which is needed by
the proposed SafeSetID LSM).
Signed-off-by: NMicah Morton <mortonm@chromium.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJames Morris <james.morris@microsoft.com>
      c1a85a00
  51. 09 1月, 2019 5 次提交