Instead of relying on enable_guc modparam to represent actual
GuC submission mode, use dedicated flag and look at modparam
only to check if submission was explicitly disabled by the user.

v2: rebased, simplified condition (Chris)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-4-michal.wajdeczko@intel.com

Both microcontrollers are part of the GT HW and are closely related to
GT operations. To keep all the files cleanly together, they've been
placed in their own subdir inside the gt/ folder
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We originally added support, in some cases partial, for different modes
of operations via guc clients:

- proxy vs direct submission;
- variable engine mask per-client.

We only ever used one flow (all submissions via a single proxy), so the
other code paths haven't been exercised and are most likely
non-functional. The guc firmware interface is also in the process of
being updated to better fit the i915 flow and our client abstraction
will need to change accordingly (or possibly go away entirely), so these
old unused paths can be considered dead and removed.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: NMatthew Brost &lt;Matthew Brost <matthew.brost@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-3-daniele.ceraolospurio@intel.com

Start partitioning off the code that talks to the hardware (GT) from the
uapi layers and move the device facing code under gt/

One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to
subdivide that header and body further (and split out the submission
code from the ringbuffer and logical context handling). This patch aims
to be simple motion so git can fixup inflight patches with little mess.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk

We want to use intel_engine_mask_t inside i915_request.h, which means
extracting it from the general header file mess and placing it inside a
types.h. A knock on effect is that the compiler wants to warn about
type-contraction of ALL_ENGINES into intel_engine_maskt_t, so prepare
for the worst.

v2: Use intel_engine_mask_t consistently
v3: Move I915_NUM_ENGINES to its natural home at the end of the enum
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401162641.10963-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

We currently verify that all doorbells can be registered with GuC and
HW but don't check that all works as expected after a db ring.

Do a nop ring of all doorbells to make sure we haven't misprogrammed
any WQ or stage descriptor data. This will also help validating
upcoming changes in the db programming flow.

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Acked-by: NKatarzyna Dec <katarzyna.dec@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827223614.22789-1-daniele.ceraolospurio@intel.com

This gets rid of the following lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc2-CI-Patchwork_7428+ #1 Not tainted
------------------------------------------------------
debugfs_test/1351 is trying to acquire lock:
 (&dev->struct_mutex){+.+.}, at: [<000000009d90d1a3>] i915_mutex_lock_interruptible+0x47/0x130 [i915]

but task is already holding lock:
 (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #6 (&mm->mmap_sem){++++}:
       __might_fault+0x63/0x90
       _copy_to_user+0x1e/0x70
       filldir+0x8c/0xf0
       dcache_readdir+0xeb/0x160
       iterate_dir+0xe6/0x150
       SyS_getdents+0xa0/0x130
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #5 (&sb->s_type->i_mutex_key#5){++++}:
       lockref_get+0x9/0x20

-> #4 ((completion)&req.done){+.+.}:
       wait_for_common+0x54/0x210
       devtmpfs_create_node+0x130/0x150
       device_add+0x5ad/0x5e0
       device_create_groups_vargs+0xd4/0xe0
       device_create+0x35/0x40
       msr_device_create+0x22/0x40
       cpuhp_invoke_callback+0xc5/0xbf0
       cpuhp_thread_fun+0x167/0x210
       smpboot_thread_fn+0x17f/0x270
       kthread+0x173/0x1b0
       ret_from_fork+0x24/0x30

-> #3 (cpuhp_state-up){+.+.}:
       cpuhp_issue_call+0x132/0x1c0
       __cpuhp_setup_state_cpuslocked+0x12f/0x2a0
       __cpuhp_setup_state+0x3a/0x50
       page_writeback_init+0x3a/0x5c
       start_kernel+0x393/0x3e2
       secondary_startup_64+0xa5/0xb0

-> #2 (cpuhp_state_mutex){+.+.}:
       __mutex_lock+0x81/0x9b0
       __cpuhp_setup_state_cpuslocked+0x4b/0x2a0
       __cpuhp_setup_state+0x3a/0x50
       page_alloc_init+0x1f/0x26
       start_kernel+0x139/0x3e2
       secondary_startup_64+0xa5/0xb0

-> #1 (cpu_hotplug_lock.rw_sem){++++}:
       cpus_read_lock+0x34/0xa0
       apply_workqueue_attrs+0xd/0x40
       __alloc_workqueue_key+0x2c7/0x4e1
       intel_guc_submission_init+0x10c/0x650 [i915]
       intel_uc_init_hw+0x29e/0x460 [i915]
       i915_gem_init_hw+0xca/0x290 [i915]
       i915_gem_init+0x115/0x3a0 [i915]
       i915_driver_load+0x9a8/0x16c0 [i915]
       i915_pci_probe+0x2e/0x90 [i915]
       pci_device_probe+0x9c/0x120
       driver_probe_device+0x2a3/0x480
       __driver_attach+0xd9/0xe0
       bus_for_each_dev+0x57/0x90
       bus_add_driver+0x168/0x260
       driver_register+0x52/0xc0
       do_one_initcall+0x39/0x150
       do_init_module+0x56/0x1ef
       load_module+0x231c/0x2d70
       SyS_finit_module+0xa5/0xe0
       entry_SYSCALL_64_fastpath+0x1c/0x89

-> #0 (&dev->struct_mutex){+.+.}:
       lock_acquire+0xaf/0x200
       __mutex_lock+0x81/0x9b0
       i915_mutex_lock_interruptible+0x47/0x130 [i915]
       i915_gem_fault+0x201/0x760 [i915]
       __do_fault+0x15/0x70
       __handle_mm_fault+0x85b/0xe40
       handle_mm_fault+0x14f/0x2f0
       __do_page_fault+0x2d1/0x560
       page_fault+0x22/0x30

other info that might help us debug this:

Chain exists of:
  &dev->struct_mutex --> &sb->s_type->i_mutex_key#5 --> &mm->mmap_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mm->mmap_sem);
                               lock(&sb->s_type->i_mutex_key#5);
                               lock(&mm->mmap_sem);
  lock(&dev->struct_mutex);

 *** DEADLOCK ***

1 lock held by debugfs_test/1351:
 #0:  (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560

stack backtrace:
CPU: 2 PID: 1351 Comm: debugfs_test Not tainted 4.15.0-rc2-CI-Patchwork_7428+ #1
Hardware name:                  /NUC6i5SYB, BIOS SYSKLi35.86A.0057.2017.0119.1758 01/19/2017
Call Trace:
 dump_stack+0x5f/0x86
 print_circular_bug+0x230/0x3b0
 check_prev_add+0x439/0x7b0
 ? lockdep_init_map_crosslock+0x20/0x20
 ? unwind_get_return_address+0x16/0x30
 ? __lock_acquire+0x1385/0x15a0
 __lock_acquire+0x1385/0x15a0
 lock_acquire+0xaf/0x200
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 __mutex_lock+0x81/0x9b0
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? i915_mutex_lock_interruptible+0x47/0x130 [i915]
 i915_mutex_lock_interruptible+0x47/0x130 [i915]
 ? __pm_runtime_resume+0x4f/0x80
 i915_gem_fault+0x201/0x760 [i915]
 __do_fault+0x15/0x70
 __handle_mm_fault+0x85b/0xe40
 handle_mm_fault+0x14f/0x2f0
 __do_page_fault+0x2d1/0x560
 page_fault+0x22/0x30
RIP: 0033:0x7f98d6f49116
RSP: 002b:00007ffd6ffc3278 EFLAGS: 00010283
RAX: 00007f98d39a2bc0 RBX: 0000000000000000 RCX: 0000000000001680
RDX: 0000000000001680 RSI: 00007ffd6ffc3400 RDI: 00007f98d39a2bc0
RBP: 00007ffd6ffc33a0 R08: 0000000000000000 R09: 00000000000005a0
R10: 000055e847c2a830 R11: 0000000000000002 R12: 0000000000000001
R13: 000055e847c1d040 R14: 00007ffd6ffc3400 R15: 00007f98d6752ba0

v2: Init preempt_work unconditionally (Chris)
v3: Mention that we need the enable_guc=1 for lockdep splat (Chris)

Testcase: igt/debugfs_test/read_all_entries # with i915.enable_guc=1
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-2-michal.winiarski@intel.com

While renaming i915_guc_submission.h to intel_guc_submission.h, update of
header guard name to _INTEL_GUC_SUBMISSION_H_ was missed.

References: a2695744 (drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|h)
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511511650-13756-1-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

With all component structures and functions named appropriately, change
the names of GuC submission source files. There were bunch of style issues
in guc_submission.c that are highlighted now by checkpatch. Fix those.
Update name in Documentation/gpu. (Joonas)

v2: Rebase.

v3: Rebase.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

GuC submission clients are currently being used in kernel only hence
update the structure name to intel_guc_client.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-5-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

i915 GuC submission is hardware interface and GuC APIs that are not user
facing should be named intel_guc* hence we change GuC submission related
functions name prefix to intel_guc. Also changed the parameter to these
functions to intel_guc struct.

v2: Using local guc variable in intel_uc_fini_hw. (Michal Wajdeczko)
Rebase.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-4-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

With the code motion mostly done, convert all the uC code away
from uint??_t at once (only a couple dozen variables), so that
reading the checkpatch.pl output should actually pinpoint if
a new uint??_t was accidentally introduced.

v2: - Include intel_uc_fw.h too (Sagar)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006084940.15910-1-joonas.lahtinen@linux.intel.com

Move GuC submission declarations into dedicated header as we want to
keep uC specific code in separate files.

v2: fix include (Chris)
    update commit message (Joonas)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: MichaĹ Winiarski <michal.winiarski@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-3-michal.wajdeczko@intel.com

Move GuC log declarations into dedicated header as we want to
keep component specific code in separate files.

v2: fix includes (Chris)
    update commit message (Joonas)
Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-2-michal.wajdeczko@intel.com

We want to keep each uC specific code in separate files.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com

This is a prerequisite to unblock next steps.

v2: correct include order (Joonas)
v3: use common function prefix (Joonas)
    add kerneldoc (Michal)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com

This patch adds new function intel_uc_init_mmio which will initialize
MMIO access related variables prior to uc load/init.

v2: Removed unnecessary export of guc_send_init_regs. Created
intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal)

v3 (Michal): add kerneldoc (Joonas)
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com

We don't need it here.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com

Prepared intel_auth_huc to separate HuC specific functionality
from GuC send action. Created new header intel_huc.h to group
HuC specific declarations.

v2: Changed argument preparation for AUTHENTICATE_HUC.
s/intel_auth_huc/intel_huc_auth. Deferred creation of intel_huc.h
to later patch.

v3: Rebase as intel_guc.h is removed. Added param description to
intel_huc_auth. (Michal)

v4: Rebase as intel_guc.h is added again. :)

v5: Rebase w.r.t removal of GuC code restructuring.

v6-v7: Rebase.

v8: Tagged subject as drm/i915/huc. (Michal Wajdeczko)
Added kernel-doc description to intel_huc_auth and intel_guc_auth_huc.
s/dev_priv/i915 and removed unnecessary variable offset. (Joonas)

v9: Rebase. Had conflict with i915_modparams change.
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506410236-17926-1-git-send-email-sagar.a.kamble@intel.com

We can just operate on the wq_tail directly (in the process descriptor).
This allows us to remove the duplicated tail from the client. While I'm
here let's also remove the constants kept in the client and document our
locking requirements. This causes a small change in one of GuC debugfs
files. We're no longer reporting constant values (which I don't think
is a problem), but we're also no longer reporting the tail (does anyone
care?).

v2: Update tail after wqi contents. (Chris)
v3: Really update tail after wqi contents.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918092536.12287-1-michal.winiarski@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

All we're really doing is incrementing a simple counter in a
doorbell_info struct. We can do without extra variables and a separate
counter kept in guc_client. Since it's gone, we're also removing its
debugfs.
The only functional change here, is that we're no longer treating 0 as a
special value. GuC doesn't seem to care, why should we?

v2: Restore desc->tail update.
v3: Drop the retry loop, assert that doorbell cookie doesn't change
behind our back.
v4: WARN rather than BUG, use xchg. (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914105125.3031-1-michal.winiarski@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

To create an upper bound on number of GuC workitems, we need to change
the way that requests are being submitted. Rather than submitting each
request as an individual workitem, we can do coalescing in a similar way
we're handlig execlist submission ports. We also need to stop pretending
that we're doing "lite-restore" in GuC submission (we would create a
workitem each time we hit this condition). This allows us to completely
remove the reservation, replacing it with a compile time check.

v2: Also coalesce when replaying on reset (Daniele)
v3: Consistent wq_resv - per-request (Daniele)
v4: Squash removing wq_resv
v5: Reflect i915_guc_submit argument changes in doc
v6: Rebase on top of execlists reset/restart fix (Chris,Michał)

References: https://bugs.freedesktop.org/show_bug.cgi?id=101873
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-2-michal.winiarski@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Originally removed in:
c1adab97 ("drm/i915/guc: Remove failed doorbell stat from debugfs")
f1448a62 ("drm/i915/guc: Remove last submission result from debugfs")

Were accidentally restored in:
925344cc ("BackMerge tag 'v4.12-rc5' into drm-next")

We can also remove unused variable and replace it with a WARN.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-1-michal.winiarski@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This member was dropped long time ago.

Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout")
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 4afc67be)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We're currently deleting the GuC logs if the FW fails to load, but those
are still useful to understand why the loading failed. Keeping the
object around allows us to access them after driver load is completed.

v2: keep the object around instead of using kernel memory (chris)
    don't store the logs in the gpu_error struct (Chris)
    add a check on guc_log_level to avoid snapshotting empty logs

v3: use separate debugfs for error log (Chris)

v4: rebased

v5: clean up obj selection, move err_load inside guc_log, move err_load
    cleanup, rename functions (Michal)

v6: move obj back to intel_guc, move functions to intel_uc.c, don't
    clear obj on new GuC load, free object only if enable_guc_loading
    is set (Michal)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495475428-19295-1-git-send-email-daniele.ceraolospurio@intel.comReviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Buffer based command transport can replace MMIO based mechanism.
It may be used to perform host-2-guc and guc-to-host communication.

Portions of this patch are based on work by:
 Michel Thierry <michel.thierry@intel.com>
 Robert Beckett <robert.beckett@intel.com>
 Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>

v2: use gem_object_pin_map (Chris)
    don't use DEBUG_RATELIMITED (Chris)
    don't track action stats (Chris)
    simplify next fence (Chris)
    use READ_ONCE (Chris)
    move blob allocation to new function (Chris)

v3: use static owner id (Daniele)
v4: but keep channel initialization generic (Daniele)
    and introduce owner_sub_id (Daniele)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170526111326.87280-3-michal.wajdeczko@intel.com

Usefulness of these stats was over-advertised.

v2: remove duplicated engine stats (Chris)
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515170610.35528-1-michal.wajdeczko@intel.comAcked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Debugfs does not seems to be a right place to display transient data.
If we want to capture errors, we should log them.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-3-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This stat is almost always zero unless fatal error occurs,
which should be reported by other means anyway.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-2-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This member was dropped long time ago.

Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout")
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We are using some scratch registers in MMIO based send function.
Make their base and count flexible in preparation of upcoming
GuC firmware/hardware changes. While around, change cmd len
parameter verification from WARN_ON to GEM_BUG_ON as we don't
need this all the time.

v2: call out WARN/GEM_BUG change in the commit msg (Daniele)
v3: don't overqualify the ints (Chris)
v4: rebase and use proper enum
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Prepare for alternate GuC notification mechanism.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[Joonas: Added newlines]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

It is safer to setup valid send function after successful GuC
hardware initialization. In addition we prepare placeholder
where we can setup any alternate GuC communication mechanism.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170502103243.54940-1-michal.wajdeczko@intel.com
[ickle: Fixup ENODEV for an impossible error path]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

On last guc/huc cleanup series we've simplified guc init hw
function but missed the one for the huc. While here, change
its signature as we don't care about huc loading status.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331115709.181940-1-michal.wajdeczko@intel.com

We can rely on compiler to notify us if we miss any case.
This approach may also reduce driver size (reported ~4K).
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331102652.177664-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This function is no longer used. Its functionality is covered
by intel_uc_fini_fw().
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Some of the DRM_NOTE messages are just using "uC" without specifying
which uc they are related to. We can be more user friendly.

v2: moved to the header (Joonas)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

The file fits better. Also use "<invalid>" for invalid case.

v2: move directly to .h (Joonas)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

There is no need to expose this function as it is called from
one function only. Also move it up to avoid forward declaration.

v2: drop intel_ prefix (Oscar) and rename to fetch_uc_fw (Michal)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327094510.167400-1-michal.wajdeczko@intel.comReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

A GuC context and a HW context are in no way related, so the name "GuC context descriptor"
is very unfortunate, because a new reader of the code gets overwhelmed very quickly with
a lot of things called "context" that refer to different things. We can improve legibility
a lot by simply renaming a few objects in the GuC code.

v2:
  - Rebased
  - s/ctx_desc_pool/stage_desc_pool
  - Move some explanations to the definition of the guc_stage_desc struct (Chris)

v3:
  - Calculate gemsize with less intermediate steps (Joonas)
  - Use BIT() macro (Joonas)
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>