On POWER9 the ibm,client-architecture-support (CAS) negotiation process
has been updated to change how the host to guest negotiation is done for
the new hash/radix mmu as well as the nest mmu, process tables and guest
translation shootdown (GTSE).

This is documented in the unreleased PAPR ACR "CAS option vector
additions for P9".

The host tells the guest which options it supports in
ibm,arch-vec-5-platform-support. The guest then chooses a subset of these
to request in the CAS call and these are agreed to in the
ibm,architecture-vec-5 property of the chosen node.

Thus we read ibm,arch-vec-5-platform-support and make our selection before
calling CAS. We then parse the ibm,architecture-vec-5 property of the
chosen node to check whether we should run as hash or radix.

ibm,arch-vec-5-platform-support format:

index value pairs: <index, val> ... <index, val>

index: Option vector 5 byte number
val:   Some representation of supported values
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
[mpe: Don't print about unknown options, be consistent with OV5_FEAT]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On POWER9 the hypervisor requires the guest to decide whether it would
like to use a hash or radix mmu model at the time it calls
ibm,client-architecture-support (CAS) based on what the hypervisor has
said it's allowed to do. It is possible to disable radix by passing
"disable_radix" on the command line. The next patch will add support for
the new CAS format, thus we need to parse the command line before calling
CAS so we can correctly select which mmu we would like to use.
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: NPaul Mackerras <paulus@ozlabs.org>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The CPPR (Current Processor Priority Register) of a XICS interrupt
presentation controller contains a value N, such that only interrupts
with a priority "more favoured" than N will be received by the CPU,
where "more favoured" means "less than". So if the CPPR has the value 5
then only interrupts with a priority of 0-4 inclusive will be received.

In theory the CPPR can support a value of 0 to 255 inclusive.
In practice Linux only uses values of 0, 4, 5 and 0xff. Setting the CPPR
to 0 rejects all interrupts, setting it to 0xff allows all interrupts.
The values 4 and 5 are used to differentiate IPIs from external
interrupts. Setting the CPPR to 5 allows IPIs to be received but not
external interrupts.

The CPPR emulation in the OPAL XICS implementation only directly
supports priorities 0 and 0xff. All other priorities are considered
equivalent, and mapped to a single priority value internally. This means
when using icp-opal we can not allow IPIs but not externals.

This breaks Linux's use of priority values when a CPU is hot unplugged.
After migrating IRQs away from the CPU that is being offlined, we set
the priority to 5, meaning we still want the offline CPU to receive
IPIs. But the effect of the OPAL XICS emulation's use of a single
priority value is that all interrupts are rejected by the CPU. With the
CPU offline, and not receiving IPIs, we may not be able to wake it up to
bring it back online.

The first part of the fix is in icp_opal_set_cpu_priority(). CPPR values
of 0 to 4 inclusive will correctly cause all interrupts to be rejected,
so we pass those CPPR values through to OPAL. However if we are called
with a CPPR of 5 or greater, the caller is expecting to be able to allow
IPIs but not external interrupts. We know this doesn't work, so instead
of rejecting all interrupts we choose the opposite which is to allow all
interrupts. This is still not correct behaviour, but we know for the
only existing caller (xics_migrate_irqs_away()), that it is the better
option.

The other part of the fix is in xics_migrate_irqs_away(). Instead of
setting priority (CPPR) to 0, and then back to 5 before migrating IRQs,
we migrate the IRQs before setting the priority back to 5. This should
have no effect on an ICP backend with a working set_priority(), and on
icp-opal it means we will keep all interrupts blocked until after we've
finished doing the IRQ migration. Additionally we wait for 5ms after
doing the migration to make sure there are no IRQs in flight.

Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Suggested-by: NMichael Ellerman <mpe@ellerman.id.au>
Reported-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Tested-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
[mpe: Rewrote comments and change log, change delay to 5ms]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Paul's patch to fix checksum folding, commit b492f7e4 ("powerpc/64:
Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofold")
missed a case in csum_add(). Fix it.
Signed-off-by: NShile Zhang <shile.zhang@nokia.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The recent commit to allow calling OPAL calls in real mode, commit
ab9bad0e ("powerpc/powernv: Remove separate entry for OPAL real mode
calls"), introduced a bug when CONFIG_JUMP_LABEL=n.

The commit moved the "mfmsr r12" prior to the call to OPAL_BRANCH, but
we missed that OPAL_BRANCH clobbers r12 when jump labels are disabled.
This leads to us using the tracepoint refcount as the MSR value,
typically zero, and saving that into PACASAVEDMSR. When we return from
OPAL we use that value as the MSR value for rfid, meaning we switch to
32-bit BE real mode - hilarity ensues.

Fix it by using r11 in OPAL_BRANCH, which is not live at the time the
macro is used in OPAL_CALL.

Fixes: ab9bad0e ("powerpc/powernv: Remove separate entry for OPAL real mode calls")
Suggested-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On 32-bit book-e machines, hugepd_ok() no longer takes into account null
hugepd values, causing this crash at boot:

  Unable to handle kernel paging request for data at address 0x80000000
  ...
  NIP [c0018378] follow_huge_addr+0x38/0xf0
  LR [c001836c] follow_huge_addr+0x2c/0xf0
  Call Trace:
   follow_huge_addr+0x2c/0xf0 (unreliable)
   follow_page_mask+0x40/0x3e0
   __get_user_pages+0xc8/0x450
   get_user_pages_remote+0x8c/0x250
   copy_strings+0x110/0x390
   copy_strings_kernel+0x2c/0x50
   do_execveat_common+0x478/0x630
   do_execve+0x2c/0x40
   try_to_run_init_process+0x18/0x60
   kernel_init+0xbc/0x110
   ret_from_kernel_thread+0x5c/0x64

This impacts all nxp (ex-freescale) 32-bit booke platforms.

This was caused by the change of hugepd_t.pd from signed to unsigned,
and the update to the nohash version of hugepd_ok(). Previously
hugepd_ok() could exclude all non-huge and NULL pgds using > 0, whereas
now we need to explicitly check that the value is not zero and also that
PD_HUGE is *clear*.

This isn't protected by the pgd_none() check in __find_linux_pte_or_hugepte()
because on 32-bit we use pgtable-nopud.h, which causes the pgd_none()
check to be always false.

Fixes: 20717e1f ("powerpc/mm: Fix little-endian 4K hugetlb")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: NMadalin-Cristian Bucur <madalin.bucur@nxp.com>
Signed-off-by: NLaurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Flesh out change log details.]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

GCC can compile with either endian, but the default ABI version is set
based on the default endianness of the toolchain. Alan Modra says:

  you need both -mbig and -mabi=elfv1 to make a powerpc64le gcc
  generate powerpc64 code

The opposite is true for powerpc64 when generating -mlittle it
requires -mabi=elfv2 to generate v2 ABI, which we were already doing.

This change adds ABI annotations together with endianness for all cases,
LE and BE. This fixes the case of building a BE kernel with a toolchain
that is LE by default.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Tested-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Tests under alignment subdirectory are skipped when executed on previous
generation hardware, but harness still marks them as failed.

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [FAIL]

The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till
the program exit which causes the test to be marked as failed.

This patch resets the value before returning to the main() routine.
With this patch the test o/p is as follows:

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [PASS]
Signed-off-by: NSachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 09206b60 ("powernv: Pass PSSCR value and mask to
power9_idle_stop") added additional code in power_enter_stop() to
distinguish between stop requests whose PSSCR had ESL=EC=1 from those
which did not. When ESL=EC=1, we do a forward-jump to a location
labelled by "1", which had the code to handle the ESL=EC=1 case.

Unfortunately just a couple of instructions before this label, is the
macro IDLE_STATE_ENTER_SEQ() which also has a label "1" in its
expansion.

As a result, the current code can result in directly executing stop
instruction for deep stop requests with PSSCR ESL=EC=1, without saving
the hypervisor state.

Fix this BUG by labeling the location that handles ESL=EC=1 case with
a more descriptive label ".Lhandle_esl_ec_set" (local label suggestion
a la .Lxx from Anton Blanchard).

While at it, rename the label "2" labelling the location of the code
handling entry into deep stop states with ".Lhandle_deep_stop".

For a good measure, change the label in IDLE_STATE_ENTER_SEQ() macro
to an not-so commonly used value in order to avoid similar mishaps in
the future.

Fixes: 09206b60 ("powernv: Pass PSSCR value and mask to power9_idle_stop")
Signed-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The POWER9 MMU reads and caches entries from the process table.
When we kexec from one kernel to another, the second kernel sets
its process table pointer but doesn't currently do anything to
make the CPU invalidate any cached entries from the old process table.
This adds a tlbie (TLB invalidate entry) instruction with parameters
to invalidate caching of the process table after the new process
table is installed.
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add new selftest that test emulate_step for Normal, Floating Point,
Vector and Vector Scalar - load/store instructions. Test should run
at boot time if CONFIG_KPROBES_SANITY_TEST and CONFIG_PPC64 is set.

Sample log:

  emulate_step_test: ld             : PASS
  emulate_step_test: lwz            : PASS
  emulate_step_test: lwzx           : PASS
  emulate_step_test: std            : PASS
  emulate_step_test: ldarx / stdcx. : PASS
  emulate_step_test: lfsx           : PASS
  emulate_step_test: stfsx          : PASS
  emulate_step_test: lfdx           : PASS
  emulate_step_test: stfdx          : PASS
  emulate_step_test: lvx            : PASS
  emulate_step_test: stvx           : PASS
  emulate_step_test: lxvd2x         : PASS
  emulate_step_test: stxvd2x        : PASS
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
[mpe: Drop start/complete lines, make it all __init]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

emulate_step() uses a number of underlying kernel functions that were
initially not enabled for LE. This has been rectified since. So, fix
emulate_step() for LE for the corresponding instructions.

Cc: stable@vger.kernel.org # v3.18+
Reported-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Pull more powerpc updates from Michael Ellerman:
 "Highlights include:

   - an update of the disassembly code used by xmon to the latest
     versions in binutils. We've received permission from all the
     authors of the relevant binutils changes to relicense their changes
     to the relevant files from GPLv3 to GPLv2, for inclusion in Linux.
     Thanks to Peter Bergner for doing the leg work to get permission
     from everyone.

   - addition of the "architected" Power9 CPU table entry, allowing us
     to boot in Power9 architected mode under a hypervisor.

   - updates to the Power9 PMU code.

   - implementation of clear_bit_unlock_is_negative_byte() to optimise
     unlock_page().

   - Freescale updates from Scott: "Highlights include 8xx breakpoints
     and perf, t1042rdb display support, and board updates."

  Thanks to:
    Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas
    Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan,
    Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter
    Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil
    Mehta, Stewart Smith"

* tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
  powerpc: Remove leftover cputime_to_nsecs call causing build error
  powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU
  powerpc/optprobes: Fix TOC handling in optprobes trampoline
  powerpc/pseries: Advertise Hot Plug Event support to firmware
  cxl: fix nested locking hang during EEH hotplug
  powerpc/xmon: Dump memory in CPU endian format
  powerpc/pseries: Revert 'Auto-online hotplugged memory'
  powerpc/powernv: Make PCI non-optional
  powerpc/64: Implement clear_bit_unlock_is_negative_byte()
  powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()
  powerpc/kernel: Remove error message in pcibios_setup_phb_resources()
  powerpc/mm: Fix typo in set_pte_at()
  pci/hotplug/pnv-php: Disable MSI and PCI device properly
  pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
  pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
  powerpc: Add POWER9 architected mode to cputable
  powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
  powerpc/perf: Avoid FAB_*_MATCH checks for power9
  powerpc/perf: Add restrictions to PMC5 in power9 DD1
  powerpc/perf: Use Instruction Counter value
  ...

INPUT_PROP_BUTTONPAD is currently only set through the platform data.
The RMI4 header doc says that this property is there to force the
buttonpad property, so we also need to detect it by looking at
the exported buttons count.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for rc1:

   - ALSA core timer and sequencer fixes for bugs spotted by syzkaller

   - a couple of trivial HD-audio fixups

   - additional PCI / codec IDs for Intel Geminilake

   - fixes for CT-XFi DMA mask bugs"

* tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix link corruption by event error handling
  ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
  ALSA: ctxfi: Fallback DMA mask to 32bit
  ALSA: timer: Reject user params with too small ticks
  ALSA: hda: Add Geminilake HDMI codec ID
  ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
  ALSA: hda - Add Geminilake PCI ID

Pull thermal management updates from Zhang Rui:

 - add thermal driver for R-Car Gen3 thermal sensors.

 - add thermal driver for ZTE' zx2967 family thermal sensors.

 - convert thermal ID allocation from IDR to IDA.

 - fix a possible NULL dereference in imx thermal driver.

 - fix a ti-soc-thermal driver dependency issue so that critical thermal
   control is still available when CPU_THERMAL is not defined.

 - update binding information for QorIQ thermal driver.

 - a couple of cleanups in thermal core, intel_powerclamp, exynos,
   dra752-thermal, mtk-thermal driver.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  powerpc/mpc85xx: Update TMU device tree node for T1023/T1024
  powerpc/mpc85xx: Update TMU device tree node for T1040/T1042
  dt-bindings: Update QorIQ TMU thermal bindings
  thermal: mtk_thermal: Staticise a number of data variables
  thermal: arm: dra752: Remove all TSHUT related definitions
  thermal: arm: dra752: Remove TSHUT configuration
  thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
  thermal: imx: Fix possible NULL dereference.
  thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property
  thermal: zx2967: add thermal driver for ZTE's zx2967 family
  thermal: use cpumask_var_t for on-stack cpu masks
  dt: bindings: add documentation for zx2967 family thermal sensor
  thermal/intel_powerclamp: Remove set-but-not-used variables
  thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver
  thermal: rcar_gen3_thermal: Document the R-Car Gen3
  thermal: convert devfreq_cooling to use an IDA
  thermal: convert cpu_cooling to use an IDA
  thermal: convert clock cooling to use an IDA
  thermal core: convert ID allocation to IDA

Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set contains mostly fixes to existing drivers as well as cleanup
  of code that's not been in active use for a while"

* tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits)
  acpi: lpss: call pwm_add_table() for BSW PWM device
  pwm: Try to load modules during pwm_get()
  pwm: Don't hold pwm_lookup_lock longer than necessary
  pwm: Make the PWM_POLARITY flag in DTB optional
  pwm: Print error messages with pr_err() instead of pr_debug()
  pwm: imx: Add polarity inversion support to i.MX's PWMv2
  pwm: imx: doc: Update imx-pwm.txt documentation entry
  pwm: imx: Remove redundant i.MX PWMv2 code
  pwm: imx: Provide atomic PWM support for i.MX PWMv2
  pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
  pwm: imx: Move PWMv2 software reset code to a separate function
  pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM
  pwm: imx: Add separate set of PWM ops for v1 and v2
  pwm: imx: Remove ipg clock and enable per clock when required
  pwm: lpss: Add Intel Gemini Lake PCI ID
  pwm: lpss: Do not export board infos for different PWM types
  pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled
  pwm: lpss: Switch to new atomic API
  pwm: lpss: Allow duty cycle to be 0
  pwm: lpss: Avoid potential overflow of base_unit
  ...

Pull drm AST2500 support from Dave Airlie:
 "This is a set of changes to enable the AST2500 BMC hardware, and also
  fix some bugs interacting with the older AST hardware.

  Some of the bug fixes are cc'ed to stable"

* tag 'drm-ast-2500-for-v4.11' of git://people.freedesktop.org/~airlied/linux:
  drm/ast: Call open_key before enable_mmio in POST code
  drm/ast: Fix test for VGA enabled
  drm/ast: POST code for the new AST2500
  drm/ast: Rename ast_init_dram_2300 to ast_post_chip_2300
  drm/ast: Factor mmc_test code in POST code
  drm/ast: Fixed vram size incorrect issue on POWER
  drm/ast: Base support for AST2500
  drm/ast: Fix calculation of MCLK
  drm/ast: Remove spurious include
  drm/ast: const'ify mode setting tables
  drm/ast: Handle configuration without P2A bridge
  drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS

Pull drm fixes from Dave Airlie:
 "Misc fixes for v4.11-rc1.

  This is a selection of fixes for recent bugs, the vmwgfx one is
  important to avoid a regression, and compat ioctl one is pretty urgent
  for stable. Otherwise nothing too much.

  I've got a separate pull req for some AST hw IBM need to enable"

* tag 'drm-fixes-for-v4.11-rc1' of git://people.freedesktop.org/~airlied/linux:
  dma-buf: add support for compat ioctl
  drm/vmwgfx: Work around drm removal of control nodes
  drm/rockchip: cdn-dp: Fix error handling
  drm/rockchip: add extcon dependency for DP
  drm: zte: fix static checker warning on variable 'fmt'

Pull IPMI updates from Corey Minyard:
 "This is a few small fixes to the main IPMI driver, make some things
  const, fix typos, etc.

  The last patch came in about a week ago, but IMHO it's best to go in
  now. It is not for the main driver, it's for the bt-bmc driver, which
  runs on the managment controller side, not on the host side, so the
  scope is limited and the change is necessary"

* tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: bt-bmc: Use a regmap for register access
  char: ipmi: constify ipmi_smi_handlers structures
  acpi:ipmi: Make IPMI user handler const
  ipmi: make ipmi_usr_hndl const
  Documentation: Fix a typo in IPMI.txt.

Pull IDR rewrite from Matthew Wilcox:
 "The most significant part of the following is the patch to rewrite the
  IDR & IDA to be clients of the radix tree. But there's much more,
  including an enhancement of the IDA to be significantly more space
  efficient, an IDR & IDA test suite, some improvements to the IDR API
  (and driver changes to take advantage of those improvements), several
  improvements to the radix tree test suite and RCU annotations.

  The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree
  for most of the last cycle. Coupled with the IDR test suite, I feel
  pretty confident that any remaining bugs are quite hard to hit. 0-day
  did a great job of watching my git tree and pointing out problems; as
  it hit them, I added new test-cases to be sure not to be caught the
  same way twice"

Willy goes on to expand a bit on the IDR rewrite rationale:
 "The radix tree and the IDR use very similar data structures.

  Merging the two codebases lets us share the memory allocation pools,
  and results in a net deletion of 500 lines of code. It also opens up
  the possibility of exposing more of the features of the radix tree to
  users of the IDR (and I have some interesting patches along those
  lines waiting for 4.12)

  It also shrinks the size of the 'struct idr' from 40 bytes to 24 which
  will shrink a fair few data structures that embed an IDR"

* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits)
  radix tree test suite: Add config option for map shift
  idr: Add missing __rcu annotations
  radix-tree: Fix __rcu annotations
  radix-tree: Add rcu_dereference and rcu_assign_pointer calls
  radix tree test suite: Run iteration tests for longer
  radix tree test suite: Fix split/join memory leaks
  radix tree test suite: Fix leaks in regression2.c
  radix tree test suite: Fix leaky tests
  radix tree test suite: Enable address sanitizer
  radix_tree_iter_resume: Fix out of bounds error
  radix-tree: Store a pointer to the root in each node
  radix-tree: Chain preallocated nodes through ->parent
  radix tree test suite: Dial down verbosity with -v
  radix tree test suite: Introduce kmalloc_verbose
  idr: Return the deleted entry from idr_remove
  radix tree test suite: Build separate binaries for some tests
  ida: Use exceptional entries for small IDAs
  ida: Move ida_bitmap to a percpu variable
  Reimplement IDR and IDA using the radix tree
  radix-tree: Add radix_tree_iter_delete
  ...

Pull IOMMU fixes from Joerg Roedel:
 "Fix an issue introduced this merge window into the AMD and Intel IOMMU
  drivers that causes an oops when the vendor-specific sysfs-entries are
  accessed.

  The reason for this issue is that I forgot to update the sysfs code in
  the drivers when moving the iommu 'struct device' to the iommu-core"

* tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix crash when accessing AMD-Vi sysfs entries
  iommu/vt-d: Fix crash when accessing VT-d sysfs entries

Pull nfsd updates from Bruce Fields:
 "The nfsd update this round is mainly a lot of miscellaneous cleanups
  and bugfixes.

  A couple changes could theoretically break working setups on upgrade.
  I don't expect complaints in practice, but they seem worth calling out
  just in case:

   - NFS security labels are now off by default; a new security_label
     export flag reenables it per export. But, having them on by default
     is a disaster, as it generally only makes sense if all your clients
     and servers have similar enough selinux policies. Thanks to Jason
     Tibbitts for pointing this out.

   - NFSv4/UDP support is off. It was never really supported, and the
     spec explicitly forbids it. We only ever left it on out of
     laziness; thanks to Jeff Layton for finally fixing that"

* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd: Fix display of the version string
  nfsd: fix configuration of supported minor versions
  sunrpc: don't register UDP port with rpcbind when version needs congestion control
  nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
  sunrpc: flag transports as having congestion control
  sunrpc: turn bitfield flags in svc_version into bools
  nfsd: remove superfluous KERN_INFO
  nfsd: special case truncates some more
  nfsd: minor nfsd_setattr cleanup
  NFSD: Reserve adequate space for LOCKT operation
  NFSD: Get response size before operation for all RPCs
  nfsd/callback: Drop a useless data copy when comparing sessionid
  nfsd/callback: skip the callback tag
  nfsd/callback: Cleanup callback cred on shutdown
  nfsd/idmap: return nfserr_inval for 0-length names
  SUNRPC/Cache: Always treat the invalid cache as unexpired
  SUNRPC: Drop all entries from cache_detail when cache_purge()
  svcrdma: Poll CQs in "workqueue" mode
  svcrdma: Combine list fields in struct svc_rdma_op_ctxt
  svcrdma: Remove unused sc_dto_q field
  ...

Pull ceph updates from Ilya Dryomov:
 "This time around we have:

   - support for rbd data-pool feature, which enables rbd images on
     erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to
     allow erasure-coded profiles with k+m up to 32.

   - a patch for ceph_d_revalidate() performance regression introduced
     in 4.9, along with some cleanups in the area (Jeff Layton)

   - a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff
     Layton)

   - buffered reads are now processed in rsize windows instead of rasize
     windows (Andreas Gerstmayr). The new default for rsize mount option
     is 64M.

   - ack vs commit distinction is gone, greatly simplifying ->fsync()
     and MOSDOpReply handling code (myself)

  ... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH
  computations are still serialized though) and several minor fixes and
  cleanups all over"

* tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits)
  libceph, rbd, ceph: WRITE | ONDISK -> WRITE
  libceph: get rid of ack vs commit
  ceph: remove special ack vs commit behavior
  ceph: tidy some white space in get_nonsnap_parent()
  crush: fix dprintk compilation
  crush: do is_out test only if we do not collide
  ceph: remove req from unsafe list when unregistering it
  rbd: constify device_type structure
  rbd: kill obj_request->object_name and rbd_segment_name_cache
  rbd: store and use obj_request->object_no
  rbd: RBD_V{1,2}_DATA_FORMAT macros
  rbd: factor out __rbd_osd_req_create()
  rbd: set offset and length outside of rbd_obj_request_create()
  rbd: support for data-pool feature
  rbd: introduce rbd_init_layout()
  rbd: use rbd_obj_bytes() more
  rbd: remove now unused rbd_obj_request_wait() and helpers
  rbd: switch rbd_obj_method_sync() to ceph_osdc_call()
  libceph: pass reply buffer length through ceph_osdc_call()
  rbd: do away with obj_request in rbd_obj_read_sync()
  ...

The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list.  When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.

Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.

This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback().  Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...

Pull x86 fixes from Ingo Molnar:
 "Two documentation updates, plus a debugging annotation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Update the stale comment in reserve_crashkernel()
  x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
  Documentation, x86, resctrl: Recommend locking for resctrlfs

Pull scheduler fixes from Ingo Molnar:
 "Two rq-clock warnings related fixes, plus a cgroups related crash fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cgroup: Move sched_online_group() back into css_online() to fix crash
  sched/fair: Update rq clock before changing a task's CPU affinity
  sched/core: Fix update_rq_clock() splat on hotplug (and suspend/resume)

Pull perf fixes from Ingo Molnar:
 "Misc fixes on the kernel and tooling side - nothing in particular
  stands out"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf/core: Fix the perf_cpu_time_max_percent check
  perf/core: Fix perf_event_enable_on_exec() timekeeping (again)
  perf/core: Remove confusing comment and move put_ctx()
  perf record: Honor --quiet option properly
  perf annotate: Add -q/--quiet option
  perf diff: Add -q/--quiet option
  perf report: Add -q/--quiet option
  perf utils: Check verbose flag properly
  perf utils: Add perf_quiet_option()
  perf record: Add -a as default target
  perf stat: Add -a as default target
  perf tools: Fail on using multiple bits long terms without value
  perf tools: Move new_term arguments into struct parse_events_term template
  perf build: Add special fixdep cleaning rule
  perf tools: Replace _SC_NPROCESSORS_CONF with max_present_cpu in cpu_topology_map
  perf header: Make build_cpu_topology skip offline/absent CPUs
  perf cpumap: Add cpu__max_present_cpu()
  perf session: Fix DEBUG=1 build with clang
  tools lib traceevent: It's preempt not prempt
  perf python: Filter out -specs=/a/b/c from the python binding cc options
  ...

Pull locking fixes from Ingo Molnar:
 "The main change is the uninlining of large refcount_t APIs, plus a
  header dependency fix.

  Note that the uninlining allowed us to enable the underflow/overflow
  warnings unconditionally and remove the debug Kconfig switch: this
  might trigger new warnings in buggy code and turn
  crashes/use-after-free bugs into less harmful memory leaks"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/refcounts: Add missing kernel.h header to have UINT_MAX defined
  locking/refcounts: Out-of-line everything

Pull objtool fixes from Ingo Molnar:
 "A handful of objtool fixes related to unreachable code, plus a build
  fix for out of tree modules"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Enclose contents of unreachable() macro in a block
  objtool: Prevent GCC from merging annotate_unreachable()
  objtool: Improve detection of BUG() and other dead ends
  objtool: Fix CONFIG_STACK_VALIDATION=y warning for out-of-tree modules

Pull IDE updates from David Miller:
 "Just one actual change here this time around, adding some init data
  annotations. The other change was bogus and got reverted"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: palm_bk3710: add __initdata to palm_bk3710_port_info
  Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)"
  ide: Fix interface autodetection in legacy IDE driver (trial #2)

Pull networking fixes from David Miller:

 1) Don't save TIPC header values before the header has been validated,
    from Jon Paul Maloy.

 2) Fix memory leak in RDS, from Zhu Yanjun.

 3) We miss to initialize the UID in the flow key in some paths, from
    Julian Anastasov.

 4) Fix latent TOS masking bug in the routing cache removal from years
    ago, also from Julian.

 5) We forget to set the sockaddr port in sctp_copy_local_addr_list(),
    fix from Xin Long.

 6) Missing module ref count drop in packet scheduler actions, from
    Roman Mashak.

 7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu.

 8) Fix use after free which happens because L2TP's ipv4 support returns
    non-zero values from it's backlog_rcv function which ipv4 interprets
    as protocol values. Fix from Paul Hüber.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  qed: Don't use attention PTT for configuring BW
  qed: Fix race with multiple VFs
  l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
  xfrm: provide correct dst in xfrm_neigh_lookup
  rhashtable: Fix RCU dereference annotation in rht_bucket_nested
  rhashtable: Fix use before NULL check in bucket_table_free
  net sched actions: do not overwrite status of action creation.
  rxrpc: Kernel calls get stuck in recvmsg
  net sched actions: decrement module reference count after table flush.
  lib: Allow compile-testing of parman
  ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
  sctp: set sin_port for addr param when checking duplicate address
  net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
  netfilter: nft_set_bitmap: incorrect bitmap size
  net: s2io: fix typo argumnet argument
  net: vxge: fix typo argumnet argument
  netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
  ipv4: mask tos for input route
  ipv4: add missing initialization for flowi4_uid
  lib: fix spelling mistake: "actualy" -> "actually"
  ...

Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like
Inspiron 7599 to support its subwoofer speaker.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails.  This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed.  We should
fall back to the default 32bit DMA when 64bit DMA fails.

Fixes: 6d74b86d ("ALSA: ctxfi - Allow 64bit DMA")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The link between the iommu sysfs-device and the struct
amd_iommu is no longer stored as driver-data. Update the
code to the new correct way of getting from device to
amd_iommu.
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The link between the iommu sysfs-device and the struct
intel_iommu is no longer stored as driver-data. Update the
code to use the new access method.
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.

For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms.  When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge branches 'fixes' and 'misc'; commit 'kuser^{/add CPU_THUMB_CAPABLE to indicate}' into for-linus

Round the initrd memblock reservation to page boundaries to prevent
other data sharing the initrd pages.  This prevents an allocation
possibly overlapping with the initrd, which would later get trampled
on in free_initrd_mem().
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>