提交 · 013bf95a83ec760a2afc37fabd6bf13a9cdae205 · openeuler / Kernel

07 9月, 2017 24 次提交

zram: add interface to specif backing device · 013bf95a

由 Minchan Kim 提交于 9月 06, 2017

For writeback feature, user should set up backing device before the zram
working.

This patch enables the interface via /sys/block/zramX/backing_dev.

Currently, it supports block device only but it could be enhanced for
file as well.

Link: http://lkml.kernel.org/r/1498459987-24562-5-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

013bf95a

zram: rename zram_decompress_page to __zram_bvec_read · 693dc1ce

由 Minchan Kim 提交于 9月 06, 2017

zram_decompress_page naming is not proper because it doesn't decompress
if page was dedup hit or stored with compression.

Use more abstract term and consistent with write path function
__zram_bvec_write.

Link: http://lkml.kernel.org/r/1498459987-24562-4-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

693dc1ce

zram: inline zram_compress · 97ec7c8b

由 Minchan Kim 提交于 9月 06, 2017

zram_compress does several things, compress, entry alloc and check
limitation.  I did for just readbility but it hurts modulization.:(

So this patch removes zram_compress functions and inline it in
__zram_bvec_write for upcoming patches.

Link: http://lkml.kernel.org/r/1498459987-24562-3-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

97ec7c8b

zram: clean up duplicated codes in __zram_bvec_write · 4ebbe7f7

由 Minchan Kim 提交于 9月 06, 2017

Patch series "writeback incompressible pages to storage", v1.

zRam is useful for memory saving with compressible pages but sometime,
workload can be changed and system has lots of incompressible pages
which is very harmful for zram.

This patch supports writeback feature of zram so admin can set up a
block device and with it, zram can save the memory via writing out the
incompressile pages once it found it's incompressible pages (1/4 comp
ratio) instead of keeping the page in memory.

[1-3] is just clean up and [4-8] is step by step feature enablement.
[4-8] is logically not bisectable(ie, logical unit separation)
although I tried to compiled out without breaking but I think it would
be better to review.

This patch (of 9):

__zram_bvec_write has some of duplicated logic for zram meta data
handling of same_page|compressed_page.  This patch aims to clean it up
without behavior change.

[xieyisheng1@huawei.com: fix compr_data_size stat]
  Link: http://lkml.kernel.org/r/1502707447-6944-1-git-send-email-xieyisheng1@huawei.com
Link: http://lkml.kernel.org/r/1496019048-27016-1-git-send-email-minchan@kernel.org
Link: http://lkml.kernel.org/r/1498459987-24562-2-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Juneho Choi <juno.choi@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4ebbe7f7

mm, memory_hotplug: remove zone restrictions · c6f03e29

由 Michal Hocko 提交于 9月 06, 2017

Historically we have enforced that any kernel zone (e.g ZONE_NORMAL) has
to precede the Movable zone in the physical memory range.  The purpose
of the movable zone is, however, not bound to any physical memory
restriction.  It merely defines a class of migrateable and reclaimable
memory.

There are users (e.g.  CMA) who might want to reserve specific physical
memory ranges for their own purpose.  Moreover our pfn walkers have to
be prepared for zones overlapping in the physical range already because
we do support interleaving NUMA nodes and therefore zones can interleave
as well.  This means we can allow each memory block to be associated
with a different zone.

Loosen the current onlining semantic and allow explicit onlining type on
any memblock.  That means that online_{kernel,movable} will be allowed
regardless of the physical address of the memblock as long as it is
offline of course.  This might result in moveble zone overlapping with
other kernel zones.  Default onlining then becomes a bit tricky but
still sensible.  echo online > memoryXY/state will online the given
block to

	1) the default zone if the given range is outside of any zone
	2) the enclosing zone if such a zone doesn't interleave with
	   any other zone
        3) the default zone if more zones interleave for this range

where default zone is movable zone only if movable_node is enabled
otherwise it is a kernel zone.

Here is an example of the semantic with (movable_node is not present but
it work in an analogous way). We start with following memblocks, all of
them offline:

  memory34/valid_zones:Normal Movable
  memory35/valid_zones:Normal Movable
  memory36/valid_zones:Normal Movable
  memory37/valid_zones:Normal Movable
  memory38/valid_zones:Normal Movable
  memory39/valid_zones:Normal Movable
  memory40/valid_zones:Normal Movable
  memory41/valid_zones:Normal Movable

Now, we online block 34 in default mode and block 37 as movable

  root@test1:/sys/devices/system/node/node1# echo online > memory34/state
  root@test1:/sys/devices/system/node/node1# echo online_movable > memory37/state
  memory34/valid_zones:Normal
  memory35/valid_zones:Normal Movable
  memory36/valid_zones:Normal Movable
  memory37/valid_zones:Movable
  memory38/valid_zones:Normal Movable
  memory39/valid_zones:Normal Movable
  memory40/valid_zones:Normal Movable
  memory41/valid_zones:Normal Movable

As we can see all other blocks can still be onlined both into Normal and
Movable zones and the Normal is default because the Movable zone spans
only block37 now.

  root@test1:/sys/devices/system/node/node1# echo online_movable > memory41/state
  memory34/valid_zones:Normal
  memory35/valid_zones:Normal Movable
  memory36/valid_zones:Normal Movable
  memory37/valid_zones:Movable
  memory38/valid_zones:Movable Normal
  memory39/valid_zones:Movable Normal
  memory40/valid_zones:Movable Normal
  memory41/valid_zones:Movable

Now the default zone for blocks 37-41 has changed because movable zone
spans that range.

  root@test1:/sys/devices/system/node/node1# echo online_kernel > memory39/state
  memory34/valid_zones:Normal
  memory35/valid_zones:Normal Movable
  memory36/valid_zones:Normal Movable
  memory37/valid_zones:Movable
  memory38/valid_zones:Normal Movable
  memory39/valid_zones:Normal
  memory40/valid_zones:Movable Normal
  memory41/valid_zones:Movable

Note that the block 39 now belongs to the zone Normal and so block38
falls into Normal by default as well.

For completness

  root@test1:/sys/devices/system/node/node1# for i in memory[34]?
  do
	echo online > $i/state 2>/dev/null
  done

  memory34/valid_zones:Normal
  memory35/valid_zones:Normal
  memory36/valid_zones:Normal
  memory37/valid_zones:Movable
  memory38/valid_zones:Normal
  memory39/valid_zones:Normal
  memory40/valid_zones:Movable
  memory41/valid_zones:Movable

Implementation wise the change is quite straightforward.  We can get rid
of allow_online_pfn_range altogether.  online_pages allows only offline
nodes already.  The original default_zone_for_pfn will become
default_kernel_zone_for_pfn.  New default_zone_for_pfn implements the
above semantic.  zone_for_pfn_range is slightly reorganized to implement
kernel and movable online type explicitly and MMOP_ONLINE_KEEP becomes a
catch all default behavior.

Link: http://lkml.kernel.org/r/20170714121233.16861-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Kani Toshimitsu <toshi.kani@hpe.com>
Cc: <slaoub@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

c6f03e29

mm, memory_hotplug: display allowed zones in the preferred ordering · e5e68930

由 Michal Hocko 提交于 9月 06, 2017

Prior to commit f1dd2cd1 ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") we used to allow to change the
valid zone types of a memory block if it is adjacent to a different zone
type.

This fact was reflected in memoryNN/valid_zones by the ordering of
printed zones.  The first one was default (echo online > memoryNN/state)
and the other one could be onlined explicitly by online_{movable,kernel}.

This behavior was removed by the said patch and as such the ordering was
not all that important.  In most cases a kernel zone would be default
anyway.  The only exception is movable_node handled by "mm,
memory_hotplug: support movable_node for hotpluggable nodes".

Let's reintroduce this behavior again because later patch will remove
the zone overlap restriction and so user will be allowed to online
kernel resp.  movable block regardless of its placement.  Original
behavior will then become significant again because it would be
non-trivial for users to see what is the default zone to online into.

Implementation is really simple.  Pull out zone selection out of
move_pfn_range into zone_for_pfn_range helper and use it in
show_valid_zones to display the zone for default onlining and then both
kernel and movable if they are allowed.  Default online zone is not
duplicated.

Link: http://lkml.kernel.org/r/20170714121233.16861-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Kani Toshimitsu <toshi.kani@hpe.com>
Cc: <slaoub@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

e5e68930

mm/memory_hotplug: just build zonelist for newly added node · c1152583

由 Wei Yang 提交于 9月 06, 2017

Commit 9adb62a5 ("mm/hotplug: correctly setup fallback zonelists
when creating new pgdat") tries to build the correct zonelist for a
newly added node, while it is not necessary to rebuild it for already
exist nodes.

In build_zonelists(), it will iterate on nodes with memory.  For a newly
added node, it will have memory until node_states_set_node() is called
in online_pages().

This patch avoids rebuilding the zonelists for already existing nodes.

build_zonelists_node() uses managed_zone(zone) checks, so it should not
include empty zones anyway.  So effectively we avoid some pointless work
under stop_machine().

[akpm@linux-foundation.org: tweak comment text]
[akpm@linux-foundation.org: coding-style tweak, per Vlastimil]
Link: http://lkml.kernel.org/r/20170626035822.50155-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

c1152583

drm/i915: wire up shrinkctl->nr_scanned · 912d572d

由 Chris Wilson 提交于 9月 06, 2017

shrink_slab() allows us to report back the number of objects we
successfully scanned (out of the target shrinkctl->nr_to_scan).  As
report the number of pages owned by each GEM object as a separate item
to the shrinker, we cannot precisely control the number of shrinker
objects we scan on each pass; and indeed may free more than requested.
If we fail to tell the shrinker about the number of objects we process,
it will continue to hold a grudge against us as any objects left
unscanned are added to the next reclaim -- and so we will keep on
"unfairly" shrinking our own slab in comparison to other slabs.

Link: http://lkml.kernel.org/r/20170822135325.9191-2-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

912d572d

mm: track actual nr_scanned during shrink_slab() · d460acb5

由 Chris Wilson 提交于 9月 06, 2017

Some shrinkers may only be able to free a bunch of objects at a time,
and so free more than the requested nr_to_scan in one pass.

Whilst other shrinkers may find themselves even unable to scan as many
objects as they counted, and so underreport.  Account for the extra
freed/scanned objects against the total number of objects we intend to
scan, otherwise we may end up penalising the slab far more than
intended.  Similarly, we want to add the underperforming scan to the
deferred pass so that we try harder and harder in future passes.

Link: http://lkml.kernel.org/r/20170822135325.9191-1-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

d460acb5

mm/slub.c: add a naive detection of double free or corruption · ce6fa91b

由 Alexander Popov 提交于 9月 06, 2017

Add an assertion similar to "fasttop" check in GNU C Library allocator
as a part of SLAB_FREELIST_HARDENED feature.  An object added to a
singly linked freelist should not point to itself.  That helps to detect
some double free errors (e.g. CVE-2017-2636) without slub_debug and
KASAN.

Link: http://lkml.kernel.org/r/1502468246-1262-1-git-send-email-alex.popov@linux.comSigned-off-by: NAlexander Popov <alex.popov@linux.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Paul E McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tycho Andersen <tycho@docker.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ce6fa91b

mm: add SLUB free list pointer obfuscation · 2482ddec

由 Kees Cook 提交于 9月 06, 2017

This SLUB free list pointer obfuscation code is modified from Brad
Spengler/PaX Team's code in the last public patch of grsecurity/PaX
based on my understanding of the code.  Changes or omissions from the
original code are mine and don't reflect the original grsecurity/PaX
code.

This adds a per-cache random value to SLUB caches that is XORed with
their freelist pointer address and value.  This adds nearly zero
overhead and frustrates the very common heap overflow exploitation
method of overwriting freelist pointers.

A recent example of the attack is written up here:

  http://cyseclabs.com/blog/cve-2016-6187-heap-off-by-one-exploit

and there is a section dedicated to the technique the book "A Guide to
Kernel Exploitation: Attacking the Core".

This is based on patches by Daniel Micay, and refactored to minimize the
use of #ifdef.

With 200-count cycles of "hackbench -g 20 -l 1000" I saw the following
run times:

 before:
 	mean 10.11882499999999999995
	variance .03320378329145728642
	stdev .18221905304181911048

  after:
	mean 10.12654000000000000014
	variance .04700556623115577889
	stdev .21680767106160192064

The difference gets lost in the noise, but if the above is to be taken
literally, using CONFIG_FREELIST_HARDENED is 0.07% slower.

Link: http://lkml.kernel.org/r/20170802180609.GA66807@beastSigned-off-by: NKees Cook <keescook@chromium.org>
Suggested-by: NDaniel Micay <danielmicay@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tycho Andersen <tycho@docker.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

2482ddec

slub: tidy up initialization ordering · ea37df54

由 Alexander Potapenko 提交于 9月 06, 2017

 - free_kmem_cache_nodes() frees the cache node before nulling out a
   reference to it

 - init_kmem_cache_nodes() publishes the cache node before initializing
   it

Neither of these matter at runtime because the cache nodes cannot be
looked up by any other thread.  But it's neater and more consistent to
reorder these.

Link: http://lkml.kernel.org/r/20170707083408.40410-1-glider@google.comSigned-off-by: NAlexander Potapenko <glider@google.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ea37df54

ocfs2: clean up some dead code · 964f14a0

由 Jun Piao 提交于 9月 06, 2017

clean up some unused functions and parameters.

Link: http://lkml.kernel.org/r/598A5E21.2080807@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

964f14a0

ocfs2: make ocfs2_set_acl() static · 01ffb56b

由 Jan Kara 提交于 9月 06, 2017

The function is never called outside of fs/ocfs2/acl.c.

Link: http://lkml.kernel.org/r/20170801141252.19675-2-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

01ffb56b

modpost: simplify sec_name() · 6124c04c

由 Masahiro Yamada 提交于 9月 06, 2017

There is code duplication between sec_name() and sech_name().  Simplify
sec_name() by re-using sech_name().  Also, move them up to remove the
forward declaration of sec_name().

Link: http://lkml.kernel.org/r/1502248721-22009-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

6124c04c

dax: initialize variable pfn before using it · 2f52074d

由 Nicolas Iooss 提交于 9月 06, 2017

dax_pmd_insert_mapping() contains the following code:

        pfn_t pfn;
        if (bdev_dax_pgoff(bdev, sector, size, &pgoff) != 0)
            goto fallback;
        /* ... */
    fallback:
      trace_dax_pmd_insert_mapping_fallback(inode, vmf, length, pfn, ret);

When the condition in the if statement fails, the function calls
trace_dax_pmd_insert_mapping_fallback() with an uninitialized pfn value.

This issue has been found while building the kernel with clang.  The
compiler reported:

    fs/dax.c:1280:6: error: variable 'pfn' is used uninitialized
    whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (bdev_dax_pgoff(bdev, sector, size, &pgoff) != 0)
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    fs/dax.c:1310:60: note: uninitialized use occurs here
      trace_dax_pmd_insert_mapping_fallback(inode, vmf, length, pfn, ret);
                                                                     ^~~

Link: http://lkml.kernel.org/r/20170903083000.587-1-nicolas.iooss_linux@m4x.orgSigned-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

2f52074d

dax: use PG_PMD_COLOUR instead of open coding · 917f3452