- 08 1月, 2017 4 次提交
-
-
由 Eli Cohen 提交于
First the function retrieving the index of the first hi latency class blue flame register. High latency class bfregs are located right above medium latency class bfregs. Fixes: c1be5232 ('IB/mlx5: Fix micro UAR allocator') Signed-off-by: NEli Cohen <eli@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Eli Cohen 提交于
This establishes a solid naming conventions for UARs. A UAR (User Access Region) can have size identical to a system page or can be fixed 4KB depending on a value queried by firmware. Each UAR always has 4 blue flame register which are used to post doorbell to send queue. In addition, a UAR has section used for posting doorbells to CQs or EQs. In this patch we change names to reflect this conventions. Signed-off-by: NEli Cohen <eli@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Eli Cohen 提交于
Make sure order of cleanup is exactly the opposite of initialization. Fixes: 9603b61d ('mlx5: Move pci device handling from mlx5_ib to mlx5_core') Signed-off-by: NEli Cohen <eli@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Eli Cohen 提交于
The logic was broken as it failed to update the response length for architectures with PAGE_SIZE larger than 4kB. As a result further extension of the ucontext response struct would fail. Fixes: d69e3bcf ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by: NEli Cohen <eli@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
- 03 1月, 2017 8 次提交
-
-
由 Artemy Kovalyov 提交于
Add "type" field to mlx5_core MKEY struct. Check whether page fault happens on MKEY corresponding to MR. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Artemy Kovalyov 提交于
Handle ODP atomic operations. When initiator of RDMA atomic operation use ODP MR to provide source data handle pagefault properly. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Artemy Kovalyov 提交于
* Update page fault event according to last specification. * Separate code path for page fault EQ, completion EQ and async EQ. * Move page fault handling work queue from mlx5_ib static variable into mlx5_core page fault EQ. * Allocate memory to store ODP event dynamically as the events arrive, since in atomic context - use mempool. * Make mlx5_ib page fault handler run in process context. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Artemy Kovalyov 提交于
In this change we turn mlx5_ib_update_mtt() into generic mlx5_ib_update_xlt() to perfrom HCA translation table modifiactions supporting both atomic and process contexts and not limited by number of modified entries. Using this function we increase preallocated MRs up to 16GB. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Artemy Kovalyov 提交于
Make use of extended UMR translation offset. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Artemy Kovalyov 提交于
* Update struct mlx5_wqe_umr_ctrl_seg. * Currenlty UMR send_flags aim only certain use cases: enabled/disable cached MR, modifying XLT for ODP. By making flags independent make UMR more flexible allowing arbitrary manipulations. * Since different UMR formats have different entry sizes UMR request should receive exact size of translation table update instead of number of entries. Rename field npages to xlt_size in struct mlx5_umr_wr and update relevant code accordingly. * Add support of length64 bit. Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Binoy Jayan 提交于
Clean up the following common code (to post a list of work requests to the send queue of the specified QP) at various places and add a helper function 'mlx5_ib_post_send_wait' to implement the same. - Initialize 'mlx5_ib_umr_context' on stack - Assign "mlx5_umr_wr:wr:wr_cqe to umr_context.cqe - Acquire the semaphore - call ib_post_send with a single ib_send_wr - wait_for_completion() - Check for umr_context.status - Release the semaphore Signed-off-by: NBinoy Jayan <binoy.jayan@linaro.org> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Leon Romanovsky 提交于
The order of features exposed by private mlx5-abi.h file is CQE zipping, packet pacing and multi-packet WQE. The internal order implemented in mlx5_ib_query_device() is multi-packet WQE, CQE zipping and packet pacing. Such difference hurts code readability, so let's sync, while mlx5-abi.h (exposed to userspace) is the primary order. This commit doesn't change any functionality. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 12月, 2016 4 次提交
-
-
由 Bart Van Assche 提交于
Make it clear that qp->sq.wqe_cnt is not the number of WQEs. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
This has been detected by building the mlx5 driver with W=1. Fixes: 1a412fb1 ('net/mlx5: Fixes: 1a412fb1 (IB/mlx5: Modify QP commands via mlx5 ifc') Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Detected by sparse. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Arnd Bergmann 提交于
We get a false-positive warning in linux-next for the mlx5 driver: infiniband/hw/mlx5/mr.c: In function ‘mlx5_ib_reg_user_mr’: infiniband/hw/mlx5/mr.c:1172:5: error: ‘order’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1161:6: note: ‘order’ was declared here infiniband/hw/mlx5/mr.c:1173:6: error: ‘ncont’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1160:6: note: ‘ncont’ was declared here infiniband/hw/mlx5/mr.c:1173:6: error: ‘page_shift’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1158:6: note: ‘page_shift’ was declared here infiniband/hw/mlx5/mr.c:1143:13: error: ‘npages’ may be used uninitialized in this function [-Werror=maybe-uninitialized] infiniband/hw/mlx5/mr.c:1159:6: note: ‘npages’ was declared here I had a trivial workaround for gcc-5 or higher, but that didn't work on gcc-4.9 unfortunately. The only way I found to avoid the warnings for gcc-4.9, short of initializing each of the arguments first was to change the calling conventions to separate the error code from the umem pointer. This avoids casting the error codes from one pointer to another incompatible pointer, and lets gcc figure out when that the data is actually valid whenever we return successfully. Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 14 12月, 2016 17 次提交
-
-
由 Bodong Wang 提交于
- Add MODIFY_QP_EX CMD to extend modify_qp. - Rate limit will be updated in the following state transactions: RTR2RTS, RTS2RTS. The limit will be removed when SQ is in RST and ERR state. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bodong Wang 提交于
Enable mlx5 based hardware to report packet pacing capabilities from kernel to user space. Packet pacing allows to limit the rate to any number between the maximum and minimum, based on user settings. The capabilities are exposed to user space through query_device by uhw. The following capabilities are reported: 1. The maximum and minimum rate limit in kbps supported by packet pacing. 2. Bitmap showing which QP types are supported by packet pacing operation. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
On some environments, such as certain SRIOV VF configurations, RoCE is not supported for mlx5 Ethernet ports. Currently, the driver will not open IB device on that port. This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET QPs) functionality to remain in place. For that end, enhance the relevant driver flows such that we do create a device instance in that case. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
This is a pre-step towards having mlx5 IB device also over Eth ports where RoCE is not supported. We change the roce enable/disable and roce_lag init/fini function names to have _eth instead of _roce. This patch doesn't change any functionality. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
Refactor the netdev notifier registration into a small helper function. This is a pre-step towards having mlx5 IB device over an Ethernet port which doesn't support RoCE. Also, renamed the de-registration helper and the new helper as netdev notifier and not roce, to make it clear this is not only used with roce. This patch doesn't change any functionality. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
The fast_registration length is used to convey length for memory registrations through UMR which can be of any size up to 2^64. Change the length type to be u64. Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Eli Cohen 提交于
When enabling many VFs, the total amount of DMA mappings increase significantly. This causes DMA allocations to take a lot of time since they are serialized in the kernel. As a result the driver enters into fatal condition due to timeout and the system hangs. To recover from this we disable MR cache for VFs. PFs will still have a full cache and VFs cache can be manipulated as usual after driver load. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Move the SRQ type assignment to be before actually using it in create_srq_user() and in create_srq_kernel() functions. Fixes: af1ba291 ('{net, IB}/mlx5: Refactor internal SRQ API') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moni Shoua 提交于
Advertise that create_ah and destroy_ah verbs are accessible from uverbs interface. Signed-off-by: NMoni Shoua <monis@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moni Shoua 提交于
Resolving a MAC address for a given IP address in userspace is inefficient. This patch lets mlx5 user driver using the kernel driver to resolve the mac and get the answer in the private section of the response. Signed-off-by: NMoni Shoua <monis@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moni Shoua 提交于
Add struct ib_udata to the signature of create_ah callback that is implemented by IB device drivers. This allows HW drivers to return extra data to the userspace library. This patch prepares the ground for mlx5 driver to resolve destination mac address for a given GID and return it to userspace. This patch was previously submitted by Knut Omang as a part of the patch set to support Oracle's Infiniband HCA (SIF). Signed-off-by: NKnut Omang <knut.omang@oracle.com> Signed-off-by: NMoni Shoua <monis@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moni Shoua 提交于
To make mlx5 user driver aware of whether kernel driver returns dmac in user data response add a new flag that will be returned back to user-space through alloc_ucontext. Signed-off-by: NMoni Shoua <monis@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moses Reuben 提交于
Add support to match packet fields which are tunneled, i.e. support matching the header of the inner packet which is the result of or bit operation of the original header and the IB_FLOW_SPEC_INNER type. The combination of IB_FLOW_SPEC_INNER | IB_FLOW_SPEC_VXLAN_TUNNEL is not needed to be checked, because the IB core has this check already. Signed-off-by: NMoses Reuben <mosesr@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Moses Reuben 提交于
Add support to receive specific Vxlan packet in ConnectX-4. Signed-off-by: NMoses Reuben <mosesr@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bodong Wang 提交于
CQE compressing reduces PCI overhead by coalescing and compressing multiple CQEs into a single merged CQE. Successful compressing improves message rate especially for small packet traffic. CQE compressing is supported for all 64B CQE formats (with certain limitations) generated by RQ/Responder or by SQ/Requestor. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bodong Wang 提交于
The capabilities include: - Max number of compressed and aggregated CQEs in a single session, while zero means unsupported. - For Responder, there are two formats of mini CQE: mini CQE with Rx hash and mini CQE with checksum. They're mutual exclusive. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bodong Wang 提交于
The capabilities whether hardware support multi packet WQE or not is exposed to user space through query_device by uhw. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 04 12月, 2016 1 次提交
-
-
由 Leon Romanovsky 提交于
The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 17 11月, 2016 6 次提交
-
-
由 Majd Dibbiny 提交于
The maximum page size in the mkey context is 2GB. Until today, we didn't enforce this requirement in the code, and therefore, if we got a page size larger than 2GB, we have passed zeros in the log_page_shift instead of the actual value and the registration failed. This patch limits the driver to use compound pages of 2GB for mkeys. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Eli Cohen 提交于
Add the 512 bytes limit of RDMA READ and the size of remote address to the max SGE calculation. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Eli Cohen 提交于
Wait before continuing unload till all pending mkey async creation requests are done. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
We put INT_MAX since this is the max value that can be held. Though there is no hardware limitation, this is practically a large enough number so we can use it. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Remove from the driver the limitation imposed by firmware check to not allow change of atomic permissions for indirect UMRs. In order to avoid failures on old firmware, we only ask for change of atomic permissions if atomic operations are supported. Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update') Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Max Gurtovoy 提交于
Replace the pre-defined macro signifying inline umr instead of the numerical constant. Signed-off-by: NMax Gurtovoy <maxg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-