Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 1月, 2010 4 次提交
    • D
      MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs · 010c108d
      由 David VomLehn 提交于 
      The MIPS processor is limited to 64 external interrupt sources. Using a
greater number without IRQ sharing requires reading platform-specific
registers. On such platforms, reading the IntCtl register to determine
which interrupt corresponds to a timer interrupt will not work.

On MIPSR2 systems there is a solution - the TI bit in the Cause register,
specifically indicates that a timer interrupt has occured. This patch uses
that bit to detect interrupts for MIPSR2 processors, which may be expected
to work regardless of how the timer interrupt may be routed in the hardware.

Signed-off-by: David VomLehn (dvomlehn@cisco.com)
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/804/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      010c108d
    • D
      MIPS: PowerTV: Streamline access to platform device registers · 59dfa2fc
      由 David VomLehn 提交于 
      Pre-compute addresses for the basic ASIC registers. This speeds up access
and allows memory for unused configurations to be freed. In addition,
uninitialized register addresses will be returned as NULL to catch bad
usage quickly.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/806/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      59dfa2fc
    • A
      MIPS: Fix vmlinuz build for 32bit-only math shells · 9c4a6fce
      由 Alexander Clouter 提交于 
      POSIX requires $((<expression>)) arithmetic in sh only to have long
arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but
the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit.

I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is
0xffffffff94100000, and for an example 4MiB kernel
VMLINUZ_LOAD_ADDRESS is made out to be:
----
alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))'
ffffffff94500000
alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))'
80000000003fffff
----

The former is obviously correct whilst the later breaks things royally.

Fortunately working with only the lower 32bit's works for both bash and
dash:
----
$ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))'
94500000
$ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))'
94500000
----

So, we can split the original 64bit string to two parts, and only
calculate the low 32bit part, which is big enough (1GiB kernel sizes
anyone?) for a normal Linux kernel image file, now, we calculate the
VMLINUZ_LOAD_ADDRESS like this:

1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix
2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE

This patch fixes vmlinuz kernel builds on systems where only a
32bit-only math shell is available.

Patch Changelog:
  Version 2
    - simplified method by using 'expr' for 'substr' and making it work
	with dash once again
  Version 1
    - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error
        of "make clean"
    - Consider more cases of the VMLINUX_LOAD_ADDRESS
  Version 0
    - initial release
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
Acked-by: NWu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/861/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      9c4a6fce
    • W
      MIPS: Add support of LZO-compressed kernels · fe1d45e0
      由 Wu Zhangjin 提交于 
      The necessary changes to the x86 Kconfig and boot/compressed to allow the
use of this new compression method.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Patchwork: http://patchwork.linux-mips.org/patch/857/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      fe1d45e0
  3. 27 1月, 2010 4 次提交
  5. 26 1月, 2010 1 次提交
  7. 25 1月, 2010 7 次提交
  9. 24 1月, 2010 1 次提交
    • H
      x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) · b1600918
      由 H. Peter Anvin 提交于 
      CONFIG_X86_CPU_DEBUG, which provides some parsed versions of the x86
CPU configuration via debugfs, has caused boot failures on real
hardware.  The value of this feature has been marginal at best, as all
this information is already available to userspace via generic
interfaces.

Causes crashes that have not been fixed + minimal utility -> remove.

See the referenced LKML thread for more information.
Reported-by: NOzan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <alpine.LFD.2.00.1001221755320.13231@localhost.localdomain>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>
      b1600918
  11. 23 1月, 2010 3 次提交
  13. 22 1月, 2010 2 次提交
  15. 21 1月, 2010 18 次提交