- make it static
- fix mask/bool handling for last param
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Since we are messing with state in the worker.

v2: drop the changes in the mst worker
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the generic mechanism to declare a bitmap instead of unsigned long.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some of the vce clocks are automatic, others need to
be manually enabled.  For ease, just disable cg when
vce is active.

v2: rebased, call vce_v1_0_enable_mgcg directly
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initial support for VCE 1.0 using newest firmware.

v2: rebased
v3: fix for TN
v4: fix FW size calculation
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements the function to set the vce clocks
on TN hardware.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For setting clocks with VCE v1.0

v2: (chk) rebased on current tree
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They seem to work fine with the kernel interface.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Previously we were completely over allocating, fix this
by actually implementing the size calculation.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Userspace will be able to tell whether a GPU reset occured by comparing
an old referece value of the counter with a new value.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

adv7511 fix.

* 'drm/next/adv7511' of git://linuxtv.org/pinchartl/fbdev:
  drm: adv7511: Fix crash in IRQ handler when no encoder is associated

rcar-du fixes
* 'drm/next/rcar-du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Split planes pre-association 4/4 between CRTCs
  drm: rcar-du: Store the number of CRTCs per group in the group structure
  drm: rcar-du: Consider plane to CRTC associations in the plane allocator
  drm: rcar-du: Keep plane to CRTC associations when disabling a plane
  drm: rcar-du: Add plane allocation debugging
  drm: rcar-du: Rename to_rcar_du_plane_state to to_rcar_plane_state
  drm: rcar-du: Embed rcar_du_planes structure into rcar_du_group
  drm: rcar-du: Move properties from rcar_du_planes to rcar_du_device
  drm: rcar-du: Document the rcar_du_plane_state structure
  drm: rcar-du: Document the rcar_du_crtc structure

If we have more than one CRTCs in a group pre-associate planes 0-3 with
CRTC 0 and planes 4-7 with CRTC 1 to minimize flicker occurring when the
association is changed. The pre-association could be controlled by a
module parameter if needed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The number of CRTCs in a group is only used to implement plane
initialization for now, but is also needed to implement pre-association
of planes to CRTCs. Store it in the group structure instead of computing
it on demand.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Hardware planes are driven by the timing generator of the CRTC they are
associated to. Changing the association requires restarting the CRTC
group that the plane belongs to, resulting in flicker on the other CRTC.

To avoid flicker as much as possible, try to allocate planes first from
the free planes already associated with the target CRTC. If allocation
fails then fall back to allocation from all free planes.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Changing the plane to CRTC associations requires restarting the CRTC
group, creating visible flicker. Mitigate the issue by changing plane
association only when a plane becomes enabled, not when it get disabled.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Plane allocation is a complex process, add debugging statements to help
finding out what could might wrong.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

All other cast functions are named without using "du", make the plane
state cast consistent with them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The rcar_du_planes structure contains a single field and is only
instantiated in the rcar_du_group structure. Embed it directly and
remove the rcar_du_planes structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The plane property objects are instantiated once per CRTC group, while
they should be instantiated once globally for the device. Fix this and
move them to the rcar_du_device structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Document the structure fields using kerneldoc.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Document the structure fields using kerneldoc.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The ADV7511 is probed before its slave encoder init function associates
it with an encoder. This creates a time window during which hot plug
detection interrupts can occur with an encoder, resulting in a crash in
the IRQ handler.

Fix this by ignoring hot plug detection IRQs when no encoder is
associated yet.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>

We picked up a silent conflict in amdkfd with drm-fixes and drm-next,
backmerge v4.1-rc5 and fix the conflicts
Signed-off-by: NDave Airlie <airlied@redhat.com>

Conflicts:
	drivers/gpu/drm/drm_irq.c

- Add the interrupts & events modules, including new IOCTLs to create and wait
  on events. The HSA RT open source stack is mainly using events to know when
  a dispatched work has been completed. In addition, this module is
  a pre-requisite for the next module I'm going to upstream - debugger support

  This module also handles H/W exceptions, such as memory exception received
  through the IOMMUv2 H/W and Bad Opcode exception receieved from the GPU.

- Adding a new kernel module parameter to let the user decide whether he wants
  to receive a SIGTERM when a memory exception occurs inside the GPU kernel and
  the HSA application doesn't wait on an appropriate event, or if he just want
  to receive notification about this event in dmesg. The default is the latter.

- Additional improvements for SDMA code

- Update my email address in Maintainers file.

* tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: change driver version to 0.7.2
  drm/amdkfd: Implement events IOCTLs
  drm/amdkfd: Add module parameter of send_sigterm
  drm/amdkfd: Add bad opcode exception handling
  drm/amdkfd: Add memory exception handling
  drm/amdkfd: Add the events module
  drm/amdkfd: add events IOCTL set definitions
  drm/amdkfd: Add interrupt handling module
  drm/radeon: Add init interrupt kfd->kgd interface
  MAINTAINERS: update amdkfd Oded's email address
  drm/amdkfd: make the sdma vm init to be asic specific
  drm/amdkfd: Use new struct for asic specific ops
  drm/amdkfd: reformat some debug prints
  drm/amdkfd: Remove unessary void pointer cast

Scattering of random drm core patches. Bunch of atomic prep work too, but
the final bits for blob properties, atomic modesets and lifting the
experimental tag on the atomic ioctl are still blocked on Daniel Stone
finalizing and testing the weston support for it. I hope that we can get
it all ready for 4.2 though.

* tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel: (22 commits)
  drm/atomic: Allow drivers to subclass drm_atomic_state, v3
  drm/atomic: remove duplicated assignment of old_plane_state
  drm/dp: Fix comment in DP helper
  drm/atomic: add drm_atomic_get_existing_*_state helpers
  drm/core: get rid of -Iinclude/drm
  drm/i915: get rid of -Iinclude/drm
  drm/atomic-helpers: Export drm_atomic_helper_update_legacy_modeset_state
  drm/atomic-helpers: Update vblank timestamping constants
  drm/sysfs: remove unnecessary connector type checks
  drm/sysfs: split DVI-I and TV-out attributes
  drm/sysfs: make optional attribute groups per connector type
  drm/sysfs: add a helper for extracting connector type from kobject
  drm/edid: Add CEA modes before inferred modes
  drm/prime: Allow internal imports without import_sg_table
  drm: Add reference counting to blob properties
  drm: Introduce blob_lock
  drm: Introduce helper for replacing blob properties
  drm: Don't leak path blob property when updating
  drm/atomic: Don't open-code CRTC state destroy
  drm/edid: Add DMT modes with ID > 0x50
  ...

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds a new kernel module parameter to amdkfd,
called send_sigterm.

This parameter specifies whether amdkfd should send the
SIGTERM signal to an HSA process, when the following conditions
occur:

1. The GPU triggers an exception regarding a kernel that was
   issued by this process.

2. The HSA process isn't waiting on an event that handles
   this exception.

The default behavior is not to send a SIGTERM and suffice
with a dmesg error print.
Reviewed-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NAlexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds Peripheral Page Request (PPR) failure processing
and reporting.

Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.

The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.

v3:
- Change all bool fields in struct kfd_memory_exception_failure to
  uint32_t
Signed-off-by: NAlexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).

The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.

The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.

v2:

Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap

v3:

Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

- AMDKFD_IOC_CREATE_EVENT:
	Creates a new event of a specified type

- AMDKFD_IOC_DESTROY_EVENT:
	Destroys an existing event

- AMDKFD_IOC_SET_EVENT:
	Signal an existing event

- AMDKFD_IOC_RESET_EVENT:
	Reset an existing event

- AMDKFD_IOC_WAIT_EVENTS:
	Wait on event(s) until they are signaled

v2:

- Move the limit of the signal events to kfd_ioctl.h so it
  can be used by userspace

v3:
- Change all bool fields in struct kfd_memory_exception_failure
to uint32_t
Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.

The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.

There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.

The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.

However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.

The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Leaving AMD soon so need to update my email address to @gmail.com
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>