Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 02 12月, 2014 1 次提交
  3. 13 11月, 2014 1 次提交
  5. 15 10月, 2014 1 次提交
    • S
      selinux: fix inode security list corruption · 923190d3
      由 Stephen Smalley 提交于 
      sb_finish_set_opts() can race with inode_free_security()
when initializing inode security structures for inodes
created prior to initial policy load or by the filesystem
during ->mount().   This appears to have always been
a possible race, but commit 3dc91d43 ("SELinux:  Fix possible
NULL pointer dereference in selinux_inode_permission()")
made it more evident by immediately reusing the unioned
list/rcu element  of the inode security structure for call_rcu()
upon an inode_free_security().  But the underlying issue
was already present before that commit as a possible use-after-free
of isec.

Shivnandan Kumar reported the list corruption and proposed
a patch to split the list and rcu elements out of the union
as separate fields of the inode_security_struct so that setting
the rcu element would not affect the list element.  However,
this would merely hide the issue and not truly fix the code.

This patch instead moves up the deletion of the list entry
prior to dropping the sbsec->isec_lock initially.  Then,
if the inode is dropped subsequently, there will be no further
references to the isec.
Reported-by: NShivnandan Kumar <shivnandan.k@samsung.com>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>
      923190d3
  7. 23 9月, 2014 1 次提交
  9. 11 9月, 2014 1 次提交
    • P
      selinux: make the netif cache namespace aware · cbe0d6e8
      由 Paul Moore 提交于 
      While SELinux largely ignores namespaces, for good reason, there are
some places where it needs to at least be aware of namespaces in order
to function correctly.  Network namespaces are one example.  Basic
awareness of network namespaces are necessary in order to match a
network interface's index number to an actual network device.

This patch corrects a problem with network interfaces added to a
non-init namespace, and can be reproduced with the following commands:

 [NOTE: the NetLabel configuration is here only to active the dynamic
        networking controls ]

 # netlabelctl unlbl add default address:0.0.0.0/0 \
   label:system_u:object_r:unlabeled_t:s0
 # netlabelctl unlbl add default address:::/0 \
   label:system_u:object_r:unlabeled_t:s0
 # netlabelctl cipsov4 add pass doi:100 tags:1
 # netlabelctl map add domain:lspp_test_netlabel_t \
   protocol:cipsov4,100

 # ip link add type veth
 # ip netns add myns
 # ip link set veth1 netns myns
 # ip a add dev veth0 10.250.13.100/24
 # ip netns exec myns ip a add dev veth1 10.250.13.101/24
 # ip l set veth0 up
 # ip netns exec myns ip l set veth1 up

 # ping -c 1 10.250.13.101
 # ip netns exec myns ping -c 1 10.250.13.100
Reported-by: NJiri Jaburek <jjaburek@redhat.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
      cbe0d6e8
  11. 09 9月, 2014 1 次提交
  13. 03 9月, 2014 1 次提交
  15. 28 8月, 2014 1 次提交
  17. 27 6月, 2014 1 次提交
  19. 04 6月, 2014 2 次提交
  21. 15 5月, 2014 1 次提交
  23. 02 5月, 2014 1 次提交
  25. 22 4月, 2014 1 次提交
    • J
      locks: rename file-private locks to "open file description locks" · 0d3f7a2d
      由 Jeff Layton 提交于 
      File-private locks have been merged into Linux for v3.15, and *now*
people are commenting that the name and macro definitions for the new
file-private locks suck.

...and I can't even disagree. The names and command macros do suck.

We're going to have to live with these for a long time, so it's
important that we be happy with the names before we're stuck with them.
The consensus on the lists so far is that they should be rechristened as
"open file description locks".

The name isn't a big deal for the kernel, but the command macros are not
visually distinct enough from the traditional POSIX lock macros. The
glibc and documentation folks are recommending that we change them to
look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a
programmer will typo one of the commands wrong, and also makes it easier
to spot this difference when reading code.

This patch makes the following changes that I think are necessary before
v3.15 ships:

1) rename the command macros to their new names. These end up in the uapi
   headers and so are part of the external-facing API. It turns out that
   glibc doesn't actually use the fcntl.h uapi header, but it's hard to
   be sure that something else won't. Changing it now is safest.

2) make the the /proc/locks output display these as type "OFDLCK"

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Stefan Metzmacher <metze@samba.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Frank Filz <ffilzlnx@mindspring.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
      0d3f7a2d
  27. 31 3月, 2014 1 次提交
    • J
      locks: add new fcntl cmd values for handling file private locks · 5d50ffd7
      由 Jeff Layton 提交于 
      Due to some unfortunate history, POSIX locks have very strange and
unhelpful semantics. The thing that usually catches people by surprise
is that they are dropped whenever the process closes any file descriptor
associated with the inode.

This is extremely problematic for people developing file servers that
need to implement byte-range locks. Developers often need a "lock
management" facility to ensure that file descriptors are not closed
until all of the locks associated with the inode are finished.

Additionally, "classic" POSIX locks are owned by the process. Locks
taken between threads within the same process won't conflict with one
another, which renders them useless for synchronization between threads.

This patchset adds a new type of lock that attempts to address these
issues. These locks conflict with classic POSIX read/write locks, but
have semantics that are more like BSD locks with respect to inheritance
and behavior on close.

This is implemented primarily by changing how fl_owner field is set for
these locks. Instead of having them owned by the files_struct of the
process, they are instead owned by the filp on which they were acquired.
Thus, they are inherited across fork() and are only released when the
last reference to a filp is put.

These new semantics prevent them from being merged with classic POSIX
locks, even if they are acquired by the same process. These locks will
also conflict with classic POSIX locks even if they are acquired by
the same process or on the same file descriptor.

The new locks are managed using a new set of cmd values to the fcntl()
syscall. The initial implementation of this converts these values to
"classic" cmd values at a fairly high level, and the details are not
exposed to the underlying filesystem. We may eventually want to push
this handing out to the lower filesystem code but for now I don't
see any need for it.

Also, note that with this implementation the new cmd values are only
available via fcntl64() on 32-bit arches. There's little need to
add support for legacy apps on a new interface like this.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
      5d50ffd7
  29. 20 3月, 2014 2 次提交
    • P
      selinux: correctly label /proc inodes in use before the policy is loaded · f64410ec
      由 Paul Moore 提交于 
      This patch is based on an earlier patch by Eric Paris, he describes
the problem below:

  "If an inode is accessed before policy load it will get placed on a
   list of inodes to be initialized after policy load.  After policy
   load we call inode_doinit() which calls inode_doinit_with_dentry()
   on all inodes accessed before policy load.  In the case of inodes
   in procfs that means we'll end up at the bottom where it does:

     /* Default to the fs superblock SID. */
     isec->sid = sbsec->sid;

     if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
             if (opt_dentry) {
                     isec->sclass = inode_mode_to_security_class(...)
                     rc = selinux_proc_get_sid(opt_dentry,
                                               isec->sclass,
                                               &sid);
                     if (rc)
                             goto out_unlock;
                     isec->sid = sid;
             }
     }

   Since opt_dentry is null, we'll never call selinux_proc_get_sid()
   and will leave the inode labeled with the label on the superblock.
   I believe a fix would be to mimic the behavior of xattrs.  Look
   for an alias of the inode.  If it can't be found, just leave the
   inode uninitialized (and pick it up later) if it can be found, we
   should be able to call selinux_proc_get_sid() ..."

On a system exhibiting this problem, you will notice a lot of files in
/proc with the generic "proc_t" type (at least the ones that were
accessed early in the boot), for example:

   # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
   system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax

However, with this patch in place we see the expected result:

   # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
   system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax

Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Acked-by: NEric Paris <eparis@redhat.com>
      f64410ec
    • P
      selinux: put the mmap() DAC controls before the MAC controls · 98883bfd
      由 Paul Moore 提交于 
      It turns out that doing the SELinux MAC checks for mmap() before the
DAC checks was causing users and the SELinux policy folks headaches
as users were seeing a lot of SELinux AVC denials for the
memprotect:mmap_zero permission that would have also been denied by
the normal DAC capability checks (CAP_SYS_RAWIO).

Example:

 # cat mmap_test.c
  #include <stdlib.h>
  #include <stdio.h>
  #include <errno.h>
  #include <sys/mman.h>

  int main(int argc, char *argv[])
  {
        int rc;
        void *mem;

        mem = mmap(0x0, 4096,
                   PROT_READ | PROT_WRITE,
                   MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
        if (mem == MAP_FAILED)
                return errno;
        printf("mem = %p\n", mem);
        munmap(mem, 4096);

        return 0;
  }
 # gcc -g -O0 -o mmap_test mmap_test.c
 # ./mmap_test
 mem = (nil)
 # ausearch -m AVC | grep mmap_zero
 type=AVC msg=audit(...): avc:  denied  { mmap_zero }
   for pid=1025 comm="mmap_test"
   scontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
   tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
   tclass=memprotect

This patch corrects things so that when the above example is run by a
user without CAP_SYS_RAWIO the SELinux AVC is no longer generated as
the DAC capability check fails before the SELinux permission check.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
      98883bfd
  31. 15 3月, 2014 1 次提交
  33. 10 3月, 2014 1 次提交
    • N
      selinux: add gfp argument to security_xfrm_policy_alloc and fix callers · 52a4c640
      由 Nikolay Aleksandrov 提交于 
      security_xfrm_policy_alloc can be called in atomic context so the
allocation should be done with GFP_ATOMIC. Add an argument to let the
callers choose the appropriate way. In order to do so a gfp argument
needs to be added to the method xfrm_policy_alloc_security in struct
security_operations and to the internal function
selinux_xfrm_alloc_user. After that switch to GFP_ATOMIC in the atomic
callers and leave GFP_KERNEL as before for the rest.
The path that needed the gfp argument addition is:
security_xfrm_policy_alloc -> security_ops.xfrm_policy_alloc_security ->
all users of xfrm_policy_alloc_security (e.g. selinux_xfrm_policy_alloc) ->
selinux_xfrm_alloc_user (here the allocation used to be GFP_KERNEL only)

Now adding a gfp argument to selinux_xfrm_alloc_user requires us to also
add it to security_context_to_sid which is used inside and prior to this
patch did only GFP_KERNEL allocation. So add gfp argument to
security_context_to_sid and adjust all of its callers as well.

CC: Paul Moore <paul@paul-moore.com>
CC: Dave Jones <davej@redhat.com>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Fan Du <fan.du@windriver.com>
CC: David S. Miller <davem@davemloft.net>
CC: LSM list <linux-security-module@vger.kernel.org>
CC: SELinux list <selinux@tycho.nsa.gov>
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Acked-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      52a4c640
  35. 06 3月, 2014 1 次提交
    • P
      selinux: correctly label /proc inodes in use before the policy is loaded · eee30946
      由 Paul Moore 提交于 
      This patch is based on an earlier patch by Eric Paris, he describes
the problem below:

  "If an inode is accessed before policy load it will get placed on a
   list of inodes to be initialized after policy load.  After policy
   load we call inode_doinit() which calls inode_doinit_with_dentry()
   on all inodes accessed before policy load.  In the case of inodes
   in procfs that means we'll end up at the bottom where it does:

     /* Default to the fs superblock SID. */
     isec->sid = sbsec->sid;

     if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
             if (opt_dentry) {
                     isec->sclass = inode_mode_to_security_class(...)
                     rc = selinux_proc_get_sid(opt_dentry,
                                               isec->sclass,
                                               &sid);
                     if (rc)
                             goto out_unlock;
                     isec->sid = sid;
             }
     }

   Since opt_dentry is null, we'll never call selinux_proc_get_sid()
   and will leave the inode labeled with the label on the superblock.
   I believe a fix would be to mimic the behavior of xattrs.  Look
   for an alias of the inode.  If it can't be found, just leave the
   inode uninitialized (and pick it up later) if it can be found, we
   should be able to call selinux_proc_get_sid() ..."

On a system exhibiting this problem, you will notice a lot of files in
/proc with the generic "proc_t" type (at least the ones that were
accessed early in the boot), for example:

   # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
   system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax

However, with this patch in place we see the expected result:

   # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
   system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax

Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Acked-by: NEric Paris <eparis@redhat.com>
      eee30946
  37. 28 2月, 2014 1 次提交
    • P
      selinux: put the mmap() DAC controls before the MAC controls · 0909c0ae
      由 Paul Moore 提交于 
      It turns out that doing the SELinux MAC checks for mmap() before the
DAC checks was causing users and the SELinux policy folks headaches
as users were seeing a lot of SELinux AVC denials for the
memprotect:mmap_zero permission that would have also been denied by
the normal DAC capability checks (CAP_SYS_RAWIO).

Example:

 # cat mmap_test.c
  #include <stdlib.h>
  #include <stdio.h>
  #include <errno.h>
  #include <sys/mman.h>

  int main(int argc, char *argv[])
  {
        int rc;
        void *mem;

        mem = mmap(0x0, 4096,
                   PROT_READ | PROT_WRITE,
                   MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
        if (mem == MAP_FAILED)
                return errno;
        printf("mem = %p\n", mem);
        munmap(mem, 4096);

        return 0;
  }
 # gcc -g -O0 -o mmap_test mmap_test.c
 # ./mmap_test
 mem = (nil)
 # ausearch -m AVC | grep mmap_zero
 type=AVC msg=audit(...): avc:  denied  { mmap_zero }
   for pid=1025 comm="mmap_test"
   scontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
   tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
   tclass=memprotect

This patch corrects things so that when the above example is run by a
user without CAP_SYS_RAWIO the SELinux AVC is no longer generated as
the DAC capability check fails before the SELinux permission check.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
      0909c0ae
  39. 06 2月, 2014 1 次提交
  41. 12 1月, 2014 1 次提交
    • S
      SELinux: Fix possible NULL pointer dereference in selinux_inode_permission() · 3dc91d43
      由 Steven Rostedt 提交于 
      While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

	isec = inode->i_security;

	rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3dc91d43
  43. 24 12月, 2013 2 次提交
  45. 17 12月, 2013 2 次提交
  47. 16 12月, 2013 1 次提交
  49. 14 12月, 2013 1 次提交
    • P
      selinux: revert 102aefdd · 4d546f81
      由 Paul Moore 提交于 
      Revert "selinux: consider filesystem subtype in policies"

This reverts commit 102aefdd.

Explanation from Eric Paris:

	SELinux policy can specify if it should use a filesystem's
	xattrs or not.  In current policy we have a specification that
	fuse should not use xattrs but fuse.glusterfs should use
	xattrs.  This patch has a bug in which non-glusterfs
	filesystems would match the rule saying fuse.glusterfs should
	use xattrs.  If both fuse and the particular filesystem in
	question are not written to handle xattr calls during the mount
	command, they will deadlock.

	I have fixed the bug to do proper matching, however I believe a
	revert is still the correct solution.  The reason I believe
	that is because the code still does not work.  The s_subtype is
	not set until after the SELinux hook which attempts to match on
	the ".gluster" portion of the rule.  So we cannot match on the
	rule in question.  The code is useless.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
      4d546f81
  51. 13 12月, 2013 4 次提交
  53. 12 12月, 2013 1 次提交
  55. 11 12月, 2013 1 次提交
  57. 10 12月, 2013 1 次提交
  59. 05 12月, 2013 3 次提交
    • P
      selinux: pull address family directly from the request_sock struct · 0b1f24e6
      由 Paul Moore 提交于 
      We don't need to inspect the packet to determine if the packet is an
IPv4 packet arriving on an IPv6 socket when we can query the
request_sock directly.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
      0b1f24e6
    • P
      selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute() · 7f721643
      由 Paul Moore 提交于 
      In selinux_ip_postroute() we perform access checks based on the
packet's security label.  For locally generated traffic we get the
packet's security label from the associated socket; this works in all
cases except for TCP SYN-ACK packets.  In the case of SYN-ACK packet's
the correct security label is stored in the connection's request_sock,
not the server's socket.  Unfortunately, at the point in time when
selinux_ip_postroute() is called we can't query the request_sock
directly, we need to recreate the label using the same logic that
originally labeled the associated request_sock.

See the inline comments for more explanation.
Reported-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>
      7f721643
    • P
      selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output() · da2ea0d0
      由 Paul Moore 提交于 
      In selinux_ip_output() we always label packets based on the parent
socket.  While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.

Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.
Reported-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: NJanak Desai <Janak.Desai@gtri.gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NPaul Moore <pmoore@redhat.com>
      da2ea0d0
  61. 14 10月, 2013 1 次提交