- 29 5月, 2014 1 次提交
-
-
由 Anna Schumaker 提交于
These functions are identical for the read and write paths so they can be combined. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 06 9月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
When coalescing requests into a single READ or WRITE RPC call, and there is no file locking involved, we don't have to refuse coalescing for requests where the lock owner information doesn't match. Reported-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
This will later allow NFS locking code to wait for readahead to complete before releasing byte range locks. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 3月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
If the state recovery failed, we want to ensure that the application doesn't try to use the same file descriptor for more reads or writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 9月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
We want to be able to pass on the information that the page was not dirtied under a lock. Instead of adding a flag parameter, do this by passing a pointer to a 'struct nfs_lock_owner' that may be NULL. Also reuse this structure in struct nfs_lock_context to carry the fl_owner_t and pid_t. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want to be able to distinguish between allocation failures, and the case where the lock context is not needed (because there are no locks). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 03 8月, 2012 1 次提交
-
-
由 Peng Tao 提交于
To allow layout driver to pass private information around pg_init/pg_doio. Signed-off-by: NPeng Tao <tao.peng@emc.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 8月, 2012 2 次提交
-
-
由 Mel Gorman 提交于
GFP_NOFS is _more_ permissive than GFP_NOIO in that it will initiate IO, just not of any filesystem data. The problem is that previously NOFS was correct because that avoids recursion into the NFS code. With swap-over-NFS, it is no longer correct as swap IO can lead to this recursion. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Replace all relevant occurences of page->index and page->mapping in the NFS client with the new page_file_index() and page_file_mapping() functions. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 7月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 5月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Function rename to ensure that the functionality of nfs_unlock_request() mirrors that of nfs_lock_request(). Then let nfs_unlock_and_release_request() do the work of what used to be called nfs_unlock_request()... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
We have to unlock the nfs_page before we call nfs_end_page_writeback to avoid races with functions that expect the page to be unlocked when PG_locked and PG_writeback are not set. The problem is that nfs_unlock_request also releases the nfs_page, causing a deadlock if the release of the nfs_open_context triggers an iput() while the PG_writeback flag is still set... The solution is to separate the unlocking and release of the nfs_page, so that we can do the former before nfs_end_page_writeback and the latter after. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 28 4月, 2012 6 次提交
-
-
由 Fred Isaman 提交于
This also has the advantage that it allows directio to use pnfs. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The coalesce code made assumptions that will no longer be true once non-page aligned io occurs. This introduces no change in current behavior, but allows for more general situations to come. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Factors out the code that will need to change when directio starts using these code paths. This will allow directio to use the generic pagein and flush routines Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Decouple nfs_pgio_header and nfs_read_data, and have (possibly multiple) nfs_read_datas each take a refcount on nfs_pgio_header. For the moment keeps nfs_read_header as a way to preallocate a single nfs_read_data with the nfs_pgio_header. The code doesn't need this, and would be prettier without, but given the amount of churn I am already introducing I didn't want to play with tuning new mempools. This also fixes bug in pnfs_ld_handle_read_error. In the case of desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing replay attempt to do nothing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Both nfs_read_data and nfs_write_data devote several fields which can be combined into a single shared struct. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 3月, 2012 2 次提交
-
-
由 Fred Isaman 提交于
The radix tree is only being used to compile lists of reqs needing commit. It is simpler to just put the reqs directly into a list. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
The last real use of this tag was removed by commit 7f2f12d9 NFS: Simplify nfs_wb_page() Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Also from linux/nfs_xdr.h. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
These files were getting <linux/module.h> via an implicit include path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 31 10月, 2011 1 次提交
-
-
由 Chuck Lever 提交于
Clean up: the first parameter of nfs_create_request() has been incorrectly documented since time immemorial (OK, since before 2.6.12). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 7月, 2011 1 次提交
-
-
由 Al Viro 提交于
just dentry, please... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 7月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
If an attempt to do pNFS fails, and we have to fall back to writing through the MDS, then we may want to re-coalesce the requests that we already have since the block size for the MDS read/writes may be different to that of the DS read/writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 7月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we always get a layout before setting up the i/o request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to ensure that the layouts are set up before we can decide to coalesce requests. To do so, we want to further split up the struct nfs_pageio_descriptor operations into an initialisation callback, a coalescing test callback, and a 'do i/o' callback. This patch cleans up the existing callback methods before adding the 'initialisation' callback. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 6月, 2011 1 次提交
-
-
由 Benny Halevy 提交于
Otherwise we end up overflowing the rpc buffer size on the receive end. Signed-off-by: NBenny Halevy <benny@tonian.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 5月, 2011 3 次提交
-
-
由 Boaz Harrosh 提交于
By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
- 27 3月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
Now that the inode scalability patches have been merged, it is no longer safe to call igrab() under the inode->i_lock. Now that we no longer call nfs_clear_request() until the nfs_page is being freed, we know that we are always holding a reference to the nfs_open_context, which again holds a reference to the path, and so the inode cannot be freed until the last nfs_page has been removed from the radix tree and freed. We can therefore skip the igrab()/iput() altogether. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 3月, 2011 1 次提交
-
-
由 Fred Isaman 提交于
We create three major hooks for the pnfs code. pnfs_mark_request_commit() is called during writeback_done from nfs_mark_request_commit, which gives the driver an opportunity to claim it wants control over commiting a particular req. pnfs_choose_commit_list() is called from nfs_scan_list to choose which list a given req should be added to, based on where we intend to send it for COMMIT. It is up to the driver to have preallocated list headers for each destination it may need. pnfs_commit_list() is how the driver actually takes control, it is used instead of nfs_commit_list(). In order to pass information between the above functions, we create a union in nfs_page to hold a lseg (which is possible because the req is not on any list while in transition), and add some flags to indicate if we need to use the pnfs code. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 3月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
If we're only doing a single write, and there are no other unstable writes being queued up, we might want to just flip to using a stable write RPC call. Reviewed-by: NNeilBrown <neilb@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 3月, 2011 4 次提交
-
-
由 Fred Isaman 提交于
Now that we have access to the pointer, clear it immediately after the put, instead of in caller. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
This will make it possible to clear the lseg pointer in the same function as it is put, instead of in the caller nfs_pageio_doio(). Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Move the pnfs_update_layout call location to nfs_pageio_do_add_request(). Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach it to each nfs_read_data so it can be sent to the layout driver. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Add a pg_test layout driver hook which is used to avoid coelescing I/O across layout stripes. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 22 12月, 2010 1 次提交
-
-
由 Jesper Juhl 提交于
Take advantage of kmem_cache_zalloc() in nfs_page_alloc(). Save a call to memset() and a few bytes. Before: [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o text data bss dec hex filename 1765 0 8 1773 6ed fs/nfs/pagelist.o After: [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o text data bss dec hex filename 1749 0 8 1757 6dd fs/nfs/pagelist.o Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 12月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
When a nfs_page is freed, nfs_free_request is called which also calls nfs_clear_request to clean out the lock and open contexts and free the pagecache page. However, a couple of places in the nfs code call nfs_clear_request themselves. What happens here if the refcount on the request is still high? We'll be releasing contexts and freeing pointers while the request is possibly still in use. Remove those bare calls to nfs_clear_context. That should only be done when the request is being freed. Note that when doing this, we need to watch out for tests of req->wb_page. Previously, nfs_set_page_tag_locked() and nfs_clear_page_tag_locked() would check the value of req->wb_page to figure out if the page is mapped into the nfsi->nfs_page_tree. We now indicate the page is mapped using the new bit PG_MAPPED in req->wb_flags . Reported-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-