Add basic clang support in clang.cpp and test__clang() testcase. The
first testcase checks if builtin clang is able to generate LLVM IR.

tests/clang.c is a proxy. Real testcase resides in
utils/c++/clang-test.cpp in c++ and exports C interface to perf test
subsystem.

Test result:

   $ perf test -v clang
   51: builtin clang support                               :
   51.1: Test builtin clang compile C source to IR              :
   --- start ---
   test child forked, pid 13215
   test child finished with 0
   ---- end ----
   Test builtin clang support subtest 0: Ok

Committer note:

Make sure you've enabled CLANG and LLVM builtin support by setting
the LIBCLANGLLVM variable on the make command line, e.g.:

  make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin

Otherwise you'll get this when trying to do the 'perf test' call above:

  # perf test clang
  51: builtin clang support                      : Skip (not compiled in)
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com
[ Removed "Test" from descriptions, redundant and already removed from all the other entries ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add necessary c++ flags and link libraries to support builtin clang and
LLVM. Add all llvm and clang libraries, so don't need to worry about
clang changes its libraries setting. However, linking perf would take
much longer than usual.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-10-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Check if basic clang compiling environment is ready.

Doesn't like 'llvm-config --libs' which can returns llvm libraries in right
order and duplicates some libraries if necessary, there's no correspondence for
clang libraries (-lclangxxx). to avoid extra complexity and to avoid new clang
breaking libraries ordering, use --start-group and --end-group.

In this test case, manually identify required clang libs and hope it to be
stable. Putting all clang libraries here is possible (use make's wildcard), but
then feature checking becomes very slow.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-9-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Check if basic LLVM compiling environment is ready.

Use llvm-config to detect include and library directories. Avoid using
'llvm-config --cxxflags' because its result contain some unwanted flags
like --sysroot (if LLVM is built by yocto).

Use '?=' to set LLVM_CONFIG, so explicitly passing LLVM_CONFIG to make
would override it.

Use 'llvm-config --libs BPF' to check if BPF backend is compiled in.
Since now BPF bytecode is the only required backend, no need to waste
time linking llvm and clang if BPF backend is missing. This also
introduce an implicit requirement that LLVM should be new enough.  Old
LLVM doesn't support BPF backend.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-8-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The following commits will use builtin clang to compile BPF scripts.

llvm__get_kbuild_opts() and llvm__get_nr_cpus() are extracted to help
building '-DKERNEL_VERSION_CODE' and '-D__NR_CPUS__' macros.

Doing object dumping in bpf loader, so further builtin clang compiling
needn't consider it.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-7-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pass a pointer to perf hook functions so they receive context
information during setup.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-6-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Clang doesn't support multiple arguments being passed to -Wp, so split
them.

  Fixes this error:
  HOSTCC   tools/objtool/fixdep.o
  cat: tools/objtool/.fixdep.o.d: No such file or directory
Signed-off-by: NPeter Foley <pefoley2@pefoley.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161128024346.17371-1-pefoley2@pefoley.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The fixdep tool, among other things, replaces the target of the object
in the gcc generated dependency output file.

The parsing code assumes there's only single target in the rule but this
is not always the case as described in here:

  https://gcc.gnu.org/ml/gcc-help/2016-11/msg00099.html

Make the fixdep code smart enough to skip all the possible targets.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NPeter Foley <pefoley2@pefoley.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161201130025.GA16430@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Support AArch64 in the 'annotate' code, native/local and
   cross-arch/remote (Kim Phillips)

 - Allow considering just events in a given time interval, via the
   '--time start.s.ms,end.s.ms' command line, added to 'perf kmem',
   'perf report', 'perf sched timehist' and 'perf script' (David Ahern)

 - Add option to stop printing a callchain at one of a given group of
   symbol names (David Ahern)

 - Handle CPU migration events in 'perf sched timehist' (David Ahern)

 - Track memory freed in 'perf kmem stat' (David Ahern)

Infrastructure:

 - Add initial support (and perf test entry) for tooling hooks, starting with
   'record_start' and 'record_end', that will have as its initial user the
   eBPF infrastructure, where perf_ prefixed functions will be JITed and
   run when such hooks are called (Wang Nan)

 - Remove redundant "test" and similar strings from 'perf test' descriptions
   (Arnaldo Carvalho de Melo)

 - Implement assorted libbpf improvements (Wang Nan)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull overlayfs fix from Miklos Szeredi:
 "This fixes a regression introduced in 4.8"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix d_real() for stacked fs

Pull input fixes from Dmitry Torokhov: "We are disabling automatic
  probing of BYD touchpads as it results in too many false positives,
  and the hardware is not terribly popular and having the protocol
  support does not result in significantly improved user experience.

  We also change keycode for KEY_DATA to avoid clashing with
  KEY_FASTREVERSE. Luckily this newish code is used by CEC framework
  that is still in staging, so it is extremely unlikely that someone has
  already started using this keycode"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: change KEY_DATA from 0x275 to 0x277
  Input: psmouse - disable automatic probing of BYD touchpads

Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created.  Let's create it at the same time as
the directory holding it is created.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Tested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a regex converted version from the original:

	https://lkml.org/lkml/2016/5/19/461

Add basic support to recognise AArch64 assembly. This allows perf to
identify AArch64 instructions that branch to other parts within the
same function, thereby properly annotating them.

Rebased onto new cross-arch annotation bits:

	https://lkml.org/lkml/2016/11/25/546

Sample output:

security_file_permission  vmlinux
  5.80 │    ← ret                                                  ▒
       │70:   ldr    w0, [x21,#68]                                 ▒
  4.44 │    ↓ tbnz   d0                                            ▒
       │      mov    w0, #0x24                       // #36        ▒
  1.37 │      ands   w0, w22, w0                                   ▒
       │    ↑ b.eq   60                                            ▒
  1.37 │    ↓ tbnz   e4                                            ▒
       │      mov    w19, #0x20000                   // #131072    ▒
  1.02 │    ↓ tbz    ec                                            ▒
       │90:┌─→ldr    x3, [x21,#24]                                 ▒
  1.37 │   │  add    x21, x21, #0x10                               ▒
       │   │  mov    w2, w19                                       ▒
  1.02 │   │  mov    x0, x21                                       ▒
       │   │  mov    x1, x3                                        ▒
  1.71 │   │  ldr    x20, [x3,#48]                                 ▒
       │   │→ bl     __fsnotify_parent                             ▒
  0.68 │   │↑ cbnz   60                                            ▒
       │   │  mov    x2, x21                                       ▒
  1.37 │   │  mov    w1, w19                                       ▒
       │   │  mov    x0, x20                                       ▒
  0.68 │   │  mov    w5, #0x0                        // #0         ▒
       │   │  mov    x4, #0x0                        // #0         ▒
  1.71 │   │  mov    w3, #0x1                        // #1         ▒
       │   │→ bl     fsnotify                                      ▒
  1.37 │   │↑ b      60                                            ▒
       │d0:│  mov    w0, #0x0                        // #0         ▒
       │   │  ldp    x19, x20, [sp,#16]                            ▒
       │   │  ldp    x21, x22, [sp,#32]                            ▒
       │   │  ldp    x29, x30, [sp],#48                            ▒
       │   │← ret                                                  ▒
       │e4:│  mov    w19, #0x10000                   // #65536     ▒
       │   └──b      90                                            ◆
       │ec:   brk    #0x800                                        ▒
Press 'h' for help on key bindings
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Signed-off-by: NChris Ryder <chris.ryder@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130092344.012e18e3e623bea395162f95@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Presume neglected in commit 786c1b51 "perf annotate: Start supporting
cross arch annotation".  This doesn't fix a bug since none of the
affected arches support parsing dec/inc instructions yet.
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Ryder <chris.ryder@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.

Committer notes:

Testing it:

Using the perf.data file captured via 'perf kmem record':

  # perf report --header-only
  # ========
  # captured on: Tue Nov 29 16:01:53 2016
  # hostname : jouet
  # os release : 4.8.8-300.fc25.x86_64
  # perf version : 4.9.rc6.g5a6aca
  # arch : x86_64
  # nrcpus online : 4
  # nrcpus avail : 4
  # cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
  # cpuid : GenuineIntel,6,61,4
  # total memory : 20254660 kB
  # cmdline : /home/acme/bin/perf kmem record usleep 1
  # event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
  # event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
  # event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
  # event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
  # event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
  # event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
  # HEADER_CPU_TOPOLOGY info available, use -I to display
  # HEADER_NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
  # HEADER_CACHE info available, use -I to display
  # missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
  # ========
  #
  # # Looking at just the histogram entries for the first event:
  #
  # perf report  | head -33
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 40  of event 'kmem:kmalloc'
  # Event count (approx.): 40
  #
  # Overhead  Trace output
  # ........  ...............................................................................................................
  #
    37.50%  call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
    10.00%  call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
     7.50%  call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
     2.50%  call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
     2.50%  call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
     2.50%  call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
     2.50%  call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
     2.50%  call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO

  #
  # # And then limiting using the example for 'perf kmem stat --time' used
  # # in the previous changeset committer note we see that there were no
  # # kmem:kmalloc in that last part of the file, but there were some
  # # kmem:kmem_cache_alloc ones:
  #
  # perf report --time 20119.782088, --stdio
  #
  # Total Lost Samples: 0
  #
  # Samples: 0  of event 'kmem:kmalloc'
  # Event count (approx.): 0
  #
  # Overhead  Trace output
  # ........  ............
  #

  # Samples: 0  of event 'kmem:kmalloc_node'
  # Event count (approx.): 0
  #
  # Overhead  Trace output
  # ........  ............
  #

  # Samples: 0  of event 'kmem:kfree'
  # Event count (approx.): 0
  #
  # Overhead  Trace output
  # ........  ............
  #

  # Samples: 8  of event 'kmem:kmem_cache_alloc'
  # Event count (approx.): 8
  #
  # Overhead  Trace output
  # ........  ..................................................................................................................
  #
    75.00%  call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
    12.50%  call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
    12.50%  call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
  #
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.

Committer notes:

Testing it:

  # perf kmem record usleep 1
  [ perf record: Woken up 0 times to write data ]
  [ perf record: Captured and wrote 1.540 MB perf.data (2049 samples) ]
  # perf evlist
  kmem:kmalloc
  kmem:kmalloc_node
  kmem:kfree
  kmem:kmem_cache_alloc
  kmem:kmem_cache_alloc_node
  kmem:kmem_cache_free
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
  #
  # # Use 'perf script' to get a first approach, select a chunk for then using
  # # with 'perf kmem stat --time'
  #
  # perf script | tail -15
    usleep 9889 [0] 20119.782088:  kmem:kmem_cache_free: (selinux_file_free_security+0x27) call_site=ffffffffb936aa07 ptr=0xffff888a1df49fc0
      perf 9888 [3] 20119.782088:  kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
      perf 9888 [3] 20119.782089: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
      perf 9888 [3] 20119.782090:  kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
      perf 9888 [3] 20119.782090: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
    usleep 9889 [0] 20119.782091: kmem:kmem_cache_alloc: (__sigqueue_alloc+0x4a) call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
      perf 9888 [3] 20119.782091:  kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
      perf 9888 [3] 20119.782093:  kmem:kmem_cache_free: (__sigqueue_free.part.17+0x33) call_site=ffffffffb90ad3f3 ptr=0xffff8889f071f6e0
      perf 9888 [3] 20119.782098: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
      perf 9888 [3] 20119.782098:  kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
      perf 9888 [3] 20119.782099: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
      perf 9888 [3] 20119.782100: kmem:kmem_cache_alloc: (alloc_buffer_head+0x21) call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
      perf 9888 [3] 20119.782101:  kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
      perf 9888 [3] 20119.782102: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
      perf 9888 [3] 20119.782103:  kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
  #
  # # stats for the whole perf.data file, i.e. no interval specified
  #
  # perf kmem stat

  SUMMARY (SLAB allocator)
  ========================
  Total bytes requested: 172,628
  Total bytes allocated: 173,088
  Total bytes freed:     161,280
  Net total bytes allocated: 11,808
  Total bytes wasted on internal fragmentation: 460
  Internal fragmentation: 0.265761%
  Cross CPU allocations: 0/851
  #
  # # stats for an end open interval, after a certain time:
  #
  # perf kmem stat --time 20119.782088,

  SUMMARY (SLAB allocator)
  ========================
  Total bytes requested: 552
  Total bytes allocated: 552
  Total bytes freed:     448
  Net total bytes allocated: 104
  Total bytes wasted on internal fragmentation: 0
  Internal fragmentation: 0.000000%
  Cross CPU allocations: 0/8
  #
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-6-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.

Committer notes:

Testing it:

  # perf sched record -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ]
  #
  # perf sched timehist | head -18
  Samples do not have callchains.
          time    cpu   task name       wait time  sch delay  run time
                        [tid/pid]          (msec)     (msec)    (msec)
  ------------- ------  --------------- ---------  ---------  --------
   19818.635579 [0002]  <idle>              0.000      0.000     0.000
   19818.635613 [0000]  perf[9116]          0.000      0.000     0.000
   19818.635676 [0000]  <idle>              0.000      0.000     0.063
   19818.635678 [0000]  rcuos/2[29]         0.000      0.002     0.001
   19818.635696 [0002]  perf[9117]          0.000      0.004     0.116
   19818.635702 [0000]  <idle>              0.001      0.000     0.024
   19818.635709 [0002]  migration/2[25]     0.000      0.003     0.012
   19818.636263 [0000]  usleep[9117]        0.005      0.000     0.560
   19818.636316 [0000]  <idle>              0.560      0.000     0.053
   19818.636358 [0002]  <idle>              0.129      0.000     0.649
   19818.636358 [0000]  usleep[9117]        0.053      0.002     0.042
  #

  # perf sched timehist --time 19818.635696,
  Samples do not have callchains.
           time    cpu  task name       wait time  sch delay  run time
                        [tid/pid]          (msec)     (msec)    (msec)
  ------------- ------  ---------------  --------  --------- ---------
   19818.635696 [0002]  perf[9117]          0.000      0.120     0.000
   19818.635702 [0000]  <idle>              0.019      0.000     0.006
   19818.635709 [0002]  migration/2[25]     0.000      0.003     0.012
   19818.636263 [0000]  usleep[9117]        0.005      0.000     0.560
   19818.636316 [0000]  <idle>              0.560      0.000     0.053
   19818.636358 [0002]  <idle>              0.129      0.000     0.649
   19818.636358 [0000]  usleep[9117]        0.053      0.002     0.042
  #
  # perf sched timehist --time 19818.635696,19818.635709
  Samples do not have callchains.
           time    cpu  task name       wait time  sch delay  run time
                        [tid/pid]          (msec)     (msec)    (msec)
  ------------- ------  --------------- ---------  --------- ---------
   19818.635696 [0002]  perf[9117]          0.000      0.120     0.000
   19818.635702 [0000]  <idle>              0.019      0.000     0.006
   19818.635709 [0002]  migration/2[25]     0.000      0.003     0.012
   19818.635709 [0000]  usleep[9117]        0.005      0.000     0.006
  #
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.

Committer notes:

Testing it:

  # perf evlist -v
  cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  #
  # perf script --hide-call-graph | head -15
    swapper    0 [0] 9693.370039:      1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370044:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370046:      7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370048:    126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370049:   2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370051:  58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370059:      1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370062:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370064:     13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370065:    250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370067:   5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
       perf 5124 [2] 9693.370076:      1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
       perf 5124 [2] 9693.370091:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
       perf 5124 [2] 9693.370095:      3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
  #
  # perf script --hide-call-graph --time ,9693.370048
    swapper    0 [0] 9693.370039:      1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370044:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370046:      7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
  # perf script --hide-call-graph --time 9693.370064,9693.370076
    swapper    0 [1] 9693.370064:     13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370065:    250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370067:   5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
  #
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Code move only; no functional change intended.

Committer notes:

Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this
set of auto-detected features:

  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                      libslang: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ on  ]

Where it was failing with:

    CC       /tmp/build/perf/util/time-utils.o
  util/time-utils.c: In function 'parse_nsec_time':
  util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration]
    time_sec = strtoul(str, &end, 10);
               ^
  util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs]
    time_sec = strtoul(str, &end, 10);
    ^
  util/time-utils.c: In function 'perf_time__parse_str':
  util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
    free(str);
    ^
  util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror]
  util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free'

Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul()
declarations and fix the build.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add function to parse a user time string of the form <start>,<stop>
where start and stop are time in sec.nsec format. Both start and stop
times are optional.

Add function to determine if a sample time is within a given time
time window of interest.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb
  kasan: support use-after-scope detection
  kasan: update kasan_global for gcc 7
  lib/debugobjects: export for use in modules
  zram: fix unbalanced idr management at hot removal
  thp: fix corner case of munlock() of PTE-mapped THPs
  mm, thp: propagation of conditional compilation in khugepaged.c

Hugetlb pages have ->index in size of the huge pages (PMD_SIZE or
PUD_SIZE), not in PAGE_SIZE as other types of pages.  This means we
cannot user page_to_pgoff() to check whether we've got the right page
for the radix-tree index.

Let's introduce page_to_index() which would return radix-tree index for
given page.

We will be able to get rid of this once hugetlb will be switched to
multi-order entries.

Fixes: fc127da0 ("truncate: handle file thp")
Link: http://lkml.kernel.org/r/20161123093053.mjbnvn5zwxw5e6lk@black.fi.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDoug Nelson <doug.nelson@intel.com>
Tested-by: NDoug Nelson <doug.nelson@intel.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Gcc revision 241896 implements use-after-scope detection.  Will be
available in gcc 7.  Support it in KASAN.

Gcc emits 2 new callbacks to poison/unpoison large stack objects when
they go in/out of scope.  Implement the callbacks and add a test.

[dvyukov@google.com: v3]
  Link: http://lkml.kernel.org/r/1479998292-144502-1-git-send-email-dvyukov@google.com
Link: http://lkml.kernel.org/r/1479226045-145148-1-git-send-email-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kasan_global struct is part of compiler/runtime ABI.  gcc revision
241983 has added a new field to kasan_global struct.  Update kernel
definition of kasan_global struct to include the new field.

Without this patch KASAN is broken with gcc 7.

Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drivers, or other modules, that use a mixture of objects (especially
objects embedded within other objects) would like to take advantage of
the debugobjects facilities to help catch misuse.  Currently, the
debugobjects interface is only available to builtin drivers and requires
a set of EXPORT_SYMBOL_GPL for use by modules.

I am using the debugobjects in i915.ko to try and catch some invalid
operations on embedded objects.  The problem currently only presents
itself across module unload so forcing i915 to be builtin is not an
option.

Link: http://lkml.kernel.org/r/20161122143039.6433-1-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "Du, Changbin" <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The zram hot removal code calls idr_remove() even when zram_remove()
returns an error (typically -EBUSY).  This results in a leftover at the
device release, eventually leading to a crash when the module is
reloaded.

As described in the bug report below, the following procedure would
cause an Oops with zram:

 - provision three zram devices via modprobe zram num_devices=3
 - configure a size for each device
   + echo "1G" > /sys/block/$zram_name/disksize
 - mkfs and mount zram0 only
 - attempt to hot remove all three devices
   + echo 2 > /sys/class/zram-control/hot_remove
   + echo 1 > /sys/class/zram-control/hot_remove
   + echo 0 > /sys/class/zram-control/hot_remove
     - zram0 removal fails with EBUSY, as expected
 - unmount zram0
 - try zram0 hot remove again
   + echo 0 > /sys/class/zram-control/hot_remove
     - fails with ENODEV (unexpected)
 - unload zram kernel module
   + completes successfully
 - zram0 device node still exists
 - attempt to mount /dev/zram0
   + mount command is killed
   + following BUG is encountered

 BUG: unable to handle kernel paging request at ffffffffa0002ba0
 IP: get_disk+0x16/0x50
 Oops: 0000 [#1] SMP
 CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176
 Call Trace:
   exact_lock+0xc/0x20
   kobj_lookup+0xdc/0x160
   get_gendisk+0x2f/0x110
   __blkdev_get+0x10c/0x3c0
   blkdev_get+0x19d/0x2e0
   blkdev_open+0x56/0x70
   do_dentry_open.isra.19+0x1ff/0x310
   vfs_open+0x43/0x60
   path_openat+0x2c9/0xf30
   do_filp_open+0x79/0xd0
   do_sys_open+0x114/0x1e0
   SyS_open+0x19/0x20
   entry_SYSCALL_64_fastpath+0x13/0x94

This patch adds the proper error check in hot_remove_store() not to call
idr_remove() unconditionally.

Fixes: 17ec4cd9 ("zram: don't call idr_remove() from zram_remove()")
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970
Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NDavid Disseldorp <ddiss@suse.de>
Reported-by: NDavid Disseldorp <ddiss@suse.de>
Tested-by: NDavid Disseldorp <ddiss@suse.de>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>    [4.4+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following program triggers BUG() in munlock_vma_pages_range():

	// autogenerated by syzkaller (http://github.com/google/syzkaller)
	#include <sys/mman.h>

	int main()
	{
	  mmap((void*)0x20105000ul, 0xc00000ul, 0x2ul, 0x2172ul, -1, 0);
	  mremap((void*)0x201fd000ul, 0x4000ul, 0xc00000ul, 0x3ul, 0x203f0000ul);
	  return 0;
	}

The test-case constructs the situation when munlock_vma_pages_range()
finds PTE-mapped THP-head in the middle of page table and, by mistake,
skips HPAGE_PMD_NR pages after that.

As result, on the next iteration it hits the middle of PMD-mapped THP
and gets upset seeing mlocked tail page.

The solution is only skip HPAGE_PMD_NR pages if the THP was mlocked
during munlock_vma_page().  It would guarantee that the page is
PMD-mapped as we never mlock PTE-mapeed THPs.

Fixes: e90309c9 ("thp: allow mlocked THP again")
Link: http://lkml.kernel.org/r/20161115132703.7s7rrgmwttegcdh4@black.fi.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[4.5+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b46e756f ("thp: extract khugepaged from mm/huge_memory.c")
moved code from huge_memory.c to khugepaged.c.  Some of this code should
be compiled only when CONFIG_SYSFS is enabled but the condition around
this code was not moved into khugepaged.c.

The result is a compilation error when CONFIG_SYSFS is disabled:

  mm/built-in.o: In function `khugepaged_defrag_store': khugepaged.c:(.text+0x2d095): undefined reference to `single_hugepage_flag_store'
  mm/built-in.o: In function `khugepaged_defrag_show': khugepaged.c:(.text+0x2d0ab): undefined reference to `single_hugepage_flag_show'

This commit adds the #ifdef CONFIG_SYSFS around the code related to
sysfs.

Link: http://lkml.kernel.org/r/20161114203448.24197-1-jeremy.lefaure@lse.epita.frSigned-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull clk fixes from Stephen Boyd:
 "Two small fixes for MIPI PLLs on sunxi devices and a build fix for a
  Broadcom clk driver having unmet dependencies"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX
  clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock
  clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it

Pull pwm fixes from Thierry Reding:
 "This contains two one-line fixes for issues that were introduced in
  v4.9-rc1"

* tag 'pwm/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fix device reference leak
  pwm: meson: Add missing spin_lock_init()

The ER records are printed without explicit log level presuming line
continuation until "\n".  After the commit 4bcc595c (printk:
reinstate KERN_CONT for printing continuation lines), the ER records are
printed a character per line.

Adding KERN_CONT to appropriate printk statements restores the printout
behavior.
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

0x275 is used by KEY_FASTREVERSE.

Fixes: 48832694 ("Input: add HDMI CEC specific keycodes")
Signed-off-by: NPing Cheng <ping.cheng@wacom.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull ARC fixes from Vineet Gupta:

 - fix PAE40 crash [Yuriy]

 - disable IO-Coherency by default

 - use a different inline asm constraint for Zero Overhead loops

* tag 'arc-4.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: PAE40: Fix crash at munmap
  ARC: mm: IOC: Don't enable IOC by default
  ARC: Don't use "+l" inline asm constraint

This enables CONFIG_MODVERSIONS again, but allows for missing symbol CRC
information in order to work around the issue that newer binutils
versions seem to occasionally drop the CRC on the floor.  binutils 2.26
seems to work fine, while binutils 2.27 seems to break MODVERSIONS of
symbols that have been defined in assembler files.

[ We've had random missing CRC's before - it may be an old problem that
  just is now reliably triggered with the weak asm symbols and a new
  version of binutils ]

Some day I really do want to remove MODVERSIONS entirely.  Sadly, today
does not appear to be that day: Debian people apparently do want the
option to enable MODVERSIONS to make it easier to have external modules
across kernel versions, and this seems to be a fairly minimal fix for
the annoying problem.

Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: NMichal Marek <mmarek@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull CIFS fixes from Steve French:
 "A few misc important cifs fixes, including a fix for a 4.9 regression
  in posix_acl xattr handling"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: iterate over posix acl xattr entry correctly in ACL_to_cifs_posix()
  Call echo service immediately after socket reconnect
  CIFS: Fix BUG() in calc_seckey()

Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  The be2iscsi is a potential device overrun in consistent memory, which
  could have nasty consequences if the consistent allocations are
  packed.

  The hpsa one fixes a regression where older controllers can now get a
  numbering clash between the first internal disk and the controller.

  The libfc one is a regression in timespec conversions which causes a
  user visible issue in a command line tool and the mpt3sas one fixes a
  regression where the controller could remain permanently blocked after
  an ATA pass through command followed by a reset"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: be2iscsi: allocate enough memory in beiscsi_boot_get_sinfo()
  scsi: mpt3sas: Unblock device after controller reset
  scsi: hpsa: use bus '3' for legacy HBA devices
  scsi: libfc: fix seconds_since_last_reset miscalculation

commit 1c3c9093 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr
from pfn, but the page shift was getting truncated to 32 bits since we lost
the proper cast to 64 bits (for PAE400

Instead of reverting that commit, use a better helper which is 32/64 bits
safe just like ARM implementation.

Fixes: 1c3c9093 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS")
Cc: <stable@vger.kernel.org>   #4.4+
Signed-off-by: NYuriy Kolerov <yuriy.kolerov@synopsys.com>
[vgupta: massaged changelog]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Linus found there still is a race in mremap after commit 5d190420
("mremap: fix race between mremap() and page cleanning").

As described by Linus:
 "the issue is that another thread might make the pte be dirty (in the
  hardware walker, so no locking of ours will make any difference)
  *after* we checked whether it was dirty, but *before* we removed it
  from the page tables"

Fix it by moving the check after we removed it from the page table.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow user to specify list of symbols which cause the dump of callchains
to stop at that symbol.

Committer notes:

Testing it:

  # perf record -ag usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ]
  #
  # # Without it:
  #
  # perf script
  swapper   0 [000]  9693.370039:          1 cycles:ppp:
                  2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                 137ffeb start_kernel ([kernel.vmlinux].init.text)
                 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text)
                 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text)

  swapper   0 [000]  9693.370044:          1 cycles:ppp:
                  20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                 137ffeb start_kernel ([kernel.vmlinux].init.text)
                 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text)
  #
  # # Using it to see just what are the calls from the 'remote_function' function:
  #
  # perf script --stop-bt remote_function
  swapper   0 [000]  9693.370039:          1 cycles:ppp:
                  2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)

  swapper   0 [000]  9693.370044:          1 cycles:ppp:
                  20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>