There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: NJoe Perches <joe@perches.com>

Extend efx_filter_rfs() to map TCP/IPv6 and UDP/IPv6 flows into
efx_filter_spec.  These are only supported on EF10; on Falcon and
Siena they will be rejected by efx_farch_filter_from_gen_spec().
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Sufficiently small linear packets can be copied into the PIO buffer
with a single call to memcpy_toio().  Non-linear packets require an
intermediate cache-line-sized buffer.

[bwh: I wrote the first version of this, but Jon did the hard work to
 handle non-linear packets.]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Try to allocate a segment of PIO buffer to each TX channel.  If
allocation fails, log an error but continue.

PIO buffers must be mapped separately from the NIC registers, with
write-combining enabled.  Where the host page size is 4K, we could
potentially map each VI's registers and PIO buffer separately.
However, this would add significant complexity, and we also need to
support architectures such as POWER which have a greater page size.
So make a single contiguous write-combining mapping after the
uncacheable mapping, aligned to the host page size, and link PIO
buffers there.  Where necessary, allocate additional VIs within
the write-combining mapping purely for access to PIO buffers.

Link all TX buffers to TX queues and the additional VIs in
efx_ef10_dimension_resources() and in efx_ef10_init_nic() after
an MC reboot.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Segmentation remains in the driver, but we generate option descriptors
describing the required packet editing rather than making our own
copies.

Reduce tso_state::ipv4_id to 16 bits, so it doesn't overflow into the
TCP_FLAGS field of the option descriptor.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

There are very few readable registers, but we may as well report them.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

After an MC reboot, the datapath may be running a different firmware
variant and have different capabilities.  It is critical that we know
the current capabilities so that we can pass valid flags to
MC_CMD_INIT_EVQ.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Rename efx_ef10_init_capabilities() to the more specific
efx_ef10_init_datapath_caps().

Stop accepting short responses to MC_CMD_GET_CAPABILITIES; we
don't need to support pre-production firmware.

Move the check for RX prefix support from efx_ef10_probe() into
efx_ef10_init_datapath_caps() and use consistent error messages
for missing TSO support and missing RX prefix support.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

If the MC reboots then the stats it reports to us will have been
reset.  We need to reset ours to get efx_update_diff_stat() working
properly.

(This is a re-run of commit 876be083 'sfc: Reset driver's
MAC stats after MC reboot seen'.)
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Unlike Siena where timestamping is provided by a peripheral, EF10
delivers RX timestamps in the packet prefix.  However the driver
doesn't yet support this.

We are also creating a PHC device for each EF10 function, even though
the clock is really shared between all of them.

Disable hardware PTP/timestamping support until it's complete.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Accept and handle 40G link events.

Accept ethtool link settings of speed == 40000 && duplex, and set the
appropriate MCDI PHY capability.

This does not include reporting of 40G media types, as those have not
yet been assigned numbers in the MCDI protocol.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

It upsets static analyzers when we don't check for allocation failure.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__GFP_ZERO is an uncommon flag and perhaps is better
not used.  static inline dma_zalloc_coherent exists
so convert the uses of dma_alloc_coherent with __GFP_ZERO
to the more common kernel style with zalloc.

Remove memset from the static inline dma_zalloc_coherent
and add just one use of __GFP_ZERO instead.

Trivially reduces the size of the existing uses of
dma_zalloc_coherent.

Realign arguments as appropriate.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the dates for files that have been added to in 2012-2013.
Drop the 'Solarstorm' brand name that's still lingering here.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

This adds support for the EF10 network controller architecture and the
SFC9100 family, starting with SFC9120 'Farmingdale', and bumps the
driver version to 4.0.

New features in the SFC9100 family include:

- Flexible allocation of internal resources to PCIe physical and virtual
  functions under firmware control
- RX event merging to reduce DMA writes at high packet rates
- Integrated RX timestamping
- PIO buffers for lower TX latency
- Firmware-driven data path that supports additional offload features
  and filter types
- Delivery of packets between functions and to multiple recipients,
  allowing firmware to implement a vswitch
- Multiple RX flow hash (RSS) contexts with their own hash keys and
  indirection tables
- 40G MAC (single port only)

...not all of which are enabled in this initial driver or the initial
firmware release.

Much of the new code is by Jon Cooper.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

This should be done during MCDI initialisation for any NIC.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Also update comments and assertions in io.h:
- EF10 does not have a general BIU collector and does not have the
  bug affecting TIMER_COMMAND_REG[0] on Falcon/Siena
- The WPTR field moved within RX_DESC_UPD_REG and TX_DESC_UPD_REG.
  Adjust efx_writed_page() accordingly
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The TX path firmware for EF10 supports 'option descriptors' to control
offloads and various other features.  Add a flag and field for these
in struct efx_tx_buffer, and don't treat them as DMA descriptors on
completion.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

On EF10, the firmware will initiate a queue flush in certain
error cases.  We need to accept that flush events might appear
at any time after a queue has been initialised, not just when
we try to flush them.

We can handle Falcon-architecture in just the same way.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

RX DMA scatter is always enabled on EF10.  Adjust the common RX
completion handling to allow for this.

RX completion events on EF10 include the length used from a single
descriptor, not the cumulative length used.  Add a field to struct
efx_rx_queue to hold the cumulative length.

[bwh: Also fix a related comment]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

On EF10, event queue initialisation requires an MCDI request which
may return failure.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add the efx_filter_is_mc_recip() function to decide whether a filter
is for a multicast recipient and can coexist with other filters with
the same match values.  Update efx_filter_insert_filter() kernel-doc
to explain the conditions for this.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

This will allow use of MCDI from the data path, in particular for
accelerated RFS.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We can set, get and compare-and-exchange without using atomic_t.
Change efx_mcdi_iface::state to the enum type we really wanted it to
be.
Suggested-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Preparation for asynchronous MCDI requests.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add support for power and current sensors, which need to be named
differently in sysfs.  Power sensors also require values to be scaled
between MCDI and sysfs, and have no minimum value.

Add definitions of the power, current, fan, and additional temperature
and voltage sensors found on SFA6902F, SFN7022F and SFN7122F.

(Includes a bug fix from Andrew Jackson.)
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We need to use extended requests to read and get metadata for sensors
numbered > 31.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

[bwh: Also name this new state, though we don't expect to see it in an event]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Define a flag for struct efx_rx_buffer and efx_rx_packet() that
indicates packet length must be read from the prefix.  If this
is set, read the length in __efx_rx_packet() (when the prefix
should have arrived in cache).
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add a counter for TX merged completion events.

This is implemented in the common TX path, because the NIC event
handlers only know how many descriptors were completed, not how many
packets.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

EF10 uses an entirely different RX prefix format from Falcon-arch.
Extend struct efx_nic_type to describe this.

[bwh: Also replace the magic numbers used for the Falcon-arch RX prefix]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>