The error path has several mistakes

- cdev_del should not be called if cdev_device_add fails
- We must call put_device on all the goto exit paths as that is what frees
  the uapi, SRCU and the struct itself.

While we are here consolidate all the uvdev_dev init that cannot fail at
the top.

Fixes: c5c4d92e ("RDMA/uverbs: Use cdev_device_add() instead of cdev_add()")
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>

rdma_set_src_addr_rcu should check copy_src_l2_addr fails, rather than
always return 0. Also copy_src_l2_addr should return 'ret' as its return
value when rdma_translate_ip fails.

Fixes: c31d4b2d ("RDMA/core: Protect against changing dst->dev during destination resolve")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Commit f27b4746 ("i40iw: add connection management code") uses an
incorrect rcu iterator, whilst holding the rtnl_lock. Since the
critical region invokes i40iw_manage_qhash(), which is a sleeping
function, the rcu locking and traversal cannot be used.
Signed-off-by: NHåkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This does nothing but indicate if the uverbs_file is in the device's list,
use list_del_init instead.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

This enum has become part of the uABI, as both RXE and the
ib_uverbs_post_send() command expect userspace to supply values from this
enum. So it should be properly placed in include/uapi/rdma.

In userspace this enum is called 'enum ibv_wr_opcode' as part of
libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV,
IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it
turns out) into libiberbs in 2015.

The kernel has changed its mind on the numbering for several of the IB_WC
values over the years, but has remained stable on IB_WR_LOCAL_INV and
below.

Based on this we can conclude that there is no real user space user of the
values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via
rdma-core. This is confirmed by inspection, only rxe uses the kernel enum
and implements the latter operations. rxe has clearly never worked with
these attributes from userspace. Other drivers that support these opcodes
implement the functionality without calling out to the kernel.

To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we
choose to renumber the IB_WR enum in the kernel to match the uABI that
userspace has bee using since before Soft RoCE was merged. This is an
overall simpler configuration for the whole software stack, and obviously
can't break anything existing.
Reported-by: NSeth Howell <seth.howell@intel.com>
Tested-by: NSeth Howell <seth.howell@intel.com>
Fixes: 8700e3e7 ("Soft RoCE driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove duplicated include.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some tools may currently be using only the deprecated attribute;
let's print an elaborate and clear deprecation notice to kmsg.

To do that, we have to replace the whole sysfs file, since we inherit
the original one from netdev.
Signed-off-by: NArseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some InfiniBand network devices have multiple ports on the same PCI
function. This initializes the `dev_port' sysfs field of those
network interfaces with their port number.

Prior to this the kernel erroneously used the `dev_id' sysfs
field of those network interfaces to convey the port number to userspace.

The use of `dev_id' was considered correct until Linux 3.15,
when another field, `dev_port', was defined for this particular
purpose and `dev_id' was reserved for distinguishing stacked ifaces
(e.g: VLANs) with the same hardware address as their parent device.

Similar fixes to net/mlx4_en and many other drivers, which started
exporting this information through `dev_id' before 3.15, were accepted
into the kernel 4 years ago.
See 76a066f2 (`net/mlx4_en: Expose port number through sysfs').
Signed-off-by: NArseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The sysfs field was introduced 4 years ago along with fixes to various
drivers that erroneously used `dev_id' for that purpose, but it was not
properly documented anywhere.
See commit v3.14-rc3-739-g3f85944f.
Signed-off-by: NArseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When resolving destination address or route, when net namespace is
unavailable, refer to the net namespace of the netdevice of the SGID
attribute. This is typically the case for requests arriving from the
network for RoCE ports.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce an API rdma_read_gid_attr_ndev_rcu() to return GID attribute
netdevice which is in UP state for accessing netdevice's fields such as
net namespace and ifindex.

This is useful for users who intent to access netdevice fields under rcu
lock.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently RoCE route resolve functionality is split between two
functions. (a) roce_resolve_route_from_path() and its helper function
rdma_resolve_ip_route().

Due to this multiple sockaddr src structures are created in both functions
with rdma_dev_addr is an interface between the two for checks.

Since there is only one user of rdma_resolve_ip_route() as RoCE, combine
the functionality of both functions to roce_resolve_route_from_path() and
further reduce the scope of rdma_dev_addr to core/addr.c

This also allow to extend addr_resolve() in subsequent patch to consider
netdev properties of GID in safer way under rcu lock.

Additionally src and dst addresses were always provided, so skip the src
addr NULL pointer check as they are present on the stack now.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

During resolving address process, during route lookup and while performing
src address translation in case of loopback mode, hold the rcu lock so
that if netdevice is moving to different net namespace, or being
unregistered, it can be synchronized with net/core/dev.c, ie

change_net_namespace()
->dev_close_many()
  ->rt6_uncached_list_flush_dev() who would change dst->dev

to loopback device of the given net namespace.

Therefore, hold the rcu lock and sync with synchronize_net() of
change_net_namespace() to ensure that netdevice cannot get freed while
dst->dev is being used.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Set and refer to rdma_dev_addr network type instead of dst->ndev to reduce
dependency on accessing dst netdevice.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use common code flow for resolving neighbour and for finding source
addresses.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that rdma_copy_addr() only copies the source addresses and all callers
are interested in copying only source addresses, simplify it to drop the
destination address argument.

Given that it only copies source layer2 addresses, rename it to
rdma_copy_src_l2_addr for better code readability.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

rdma_translate_ip() is done while resolving address for the loopback
addresses. The current flow is convoluted with resolve neighbor being
optional.

This patch simplifies the code in following ways.

(a) Use common code between IPv4 and IPv6 for address translation,
    loopback checks and acquiring netdevice.
(b) During neigh resolve in addr_resolve_neigh(), only copy destination
    address.
(c) Always resolve the source address before the destination address,
    because it doesn't depend on resolving neigh being requested or not.

This helps to reduce 3 calls of rdma_copy_addr and rdma_translate_ip to
one and makes it easier to follow the code flow.

Now that ib_nl_fetch_ha() doesn't depend on dst, drop dst argument from
ib_nl_fetch_ha().
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Current code typecasts destination address using extra variable but uses
source address as is.

Even though the compiler optimizes such code well, just let each protocol
specific function typecast for src and dest both and have symmetric code.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

addr4_resolve() and addr6_resolve() are called by checking the value of
sa_family.

Both above functions overwrite the value after typecasting, this is not
necessary.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This fixes two issues:
1. When address family is other than IPv4 or v6, rdma_translate_ip()
   returns success which is incorrect.
2. When address familty is AF_INET6, and if the source address is not
   found, it returns success, which is also incorrect.

Therefore, introduce and use rdma_find_ndev_for_src_ip_rcu() helper
function which returns correct success or error status and is also useful
for future code refactor in addr_resolve().
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The transition is allowed from any state and the atrribute mask must be
IB_QP_STATE.

Fixes: c32a4f29 ("IB/mlx5: Add support for DC Initiator QP")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

HFI IRQ enable bits are not being set correctly.  Send context error and
DC IRQs are not being enabled correctly.  In addition, send context error
IRQs are not being delivered.

Because of this, send context errors are not being handled correctly when
they occur.

When setting the IRQ bits, if an IRQ range is used, and the last bit is on
a register boundary (bit 63), the calculated index for the final register
modification is incorrect (index + 1 vs. index).

The incorrect index calculation causes incorrect IRQ bits to be set.  In
this case the send context error IRQ is NOT enabled.

Fix by using the 'last' value rather than the counted 'src' value to
determine the final index to use.  This satisfies all cases.

Fixes: a2f7bbdc ("IB/hfi1: Rework the IRQ API to be more flexible")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If the set_txreq_header_agh() function returns an error, the exit path
is chosen.

In this path, the code fails to set the return value.  This will cause
the caller to not realize an error has occurred.

Set the return value correctly in the error path.
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Hardware limits the maximum number of packets to u16 packets.

Match that size for all relevant sequence numbers in the user_sdma
engine.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Packet queue state is over used to determine SDMA descriptor
availablitity and packet queue request state.

cpu 0  ret = user_sdma_send_pkts(req, pcount);
cpu 0  if (atomic_read(&pq->n_reqs))
cpu 1  IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE)
cpu 0        xchg(&pq->state, SDMA_PKT_Q_ACTIVE);

At this point pq->n_reqs == 0 and pq->state is incorrectly
SDMA_PKT_Q_ACTIVE.  The close path will hang waiting for the state
to return to _INACTIVE.

This can also change the state from _DEFERRED to _ACTIVE.  However,
this is a mostly benign race.

Remove the racy code path.

Use n_reqs to determine if a packet queue is active or not.
Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

pq_update() can only be called in two places: from the completion
function when the complete (npkts) sequence of packets has been
submitted and processed, or from setup function if a subset of the
packets were submitted (i.e. the error path).

Currently both paths can call pq_update() if an error occurrs.  This
race will cause the n_req value to go negative, hanging file_close(),
or cause a crash by freeing the txlist more than once.

Several variables are used to determine SDMA send state.  Most of
these are unnecessary, and have code inspectible races between the
setup function and the completion function, in both the send path and
the error path.

The request 'status' value can be set by the setup or by the
completion function.  This is code inspectibly racy.  Since the status
is not needed in the completion code or by the caller it has been
removed.

The request 'done' value races between usage by the setup and the
completion function.  The completion function does not need this.
When the number of processed packets matches npkts, it is done.

The 'has_error' value races between usage of the setup and the
completion function.  This can cause incorrect error handling and leave
the n_req in an incorrect value (i.e. negative).

Simplify the code by removing all of the unneeded state checks and
variables.

Clean up iovs node when it is freed.

Eliminate race conditions in the error path:

If all packets are submitted, the completion handler will set the
completion status correctly (ok or aborted).

If all packets are not submitted, the caller must wait until the
submitted packets have completed, and then set the completion status.

These two change eliminate the race condition in the error path.
Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The error code isn't set on this path.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The post_send() path determines if it should post directly or, schedule
the post for later.  The current logic is:

  if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold
    post the send
  else
    schedule

This can allow large requests to call the send engine directly.  Large
requests can potentially produce a large number of packets prior to
returning to the caller, blocking the caller from posting more requests,
and allowing better parallel processing.

Allow the driver(s) more say in this logic (pass call_send to the driver,
rather than examining a return value).

Update hfi1/qib logic to schedule the send engine if an RC or UC message
is larger than the QP MTU size.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

debugfs_remove has taken the IS_ERR_OR_NULL into account. Just remove the
unnecessary condition.
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently a matcher can only be created and attached to a NIC RX flow
table. Extend it to allow it on NIC TX flow tables as well.

In order to achieve that, we:

1) Expose a new attribute: MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS.
   enum ib_flow_flags is used as valid flags. Only
   IB_FLOW_ATTR_FLAGS_EGRESS is supported.

2) Remove the requirement to have a DEVX or QP destination when creating a
   flow. A flow added to NIC TX flow table will forward the packet outside
   of the vport (Wire or E-Switch in the SR-iOV case).
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add the ability to get a NIC TX flow table when using _get_flow_table().
This will allow to create a matcher and a flow rule on the NIC TX path.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Support attaching flow actions to a flow rule via raw create flow.
For now only NIC RX path is supported. This change requires to export
flow resources management functions so we can maintain proper bookkeeping
of flow actions.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move struct mlx5_flow_act to be passed from the method entry point,
this will allow to add support for flow action for the raw create flow
path.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

We support only a single action type per flow rule, in case the user passes
the same type of flow actions fail the flow creation.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make the parsing of flow actions more generic so it could be used by
mlx5 raw create flow.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use ib_set_flow() when initializing flow related resources.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Methods sometimes need to get a flexible set of IDRs and not a strict set
as can be achieved today by the conventional IDR attribute. Add a new
IDRS_ARRAY attribute to the generic uverbs ioctl layer.

IDRS_ARRAY points to array of idrs of the same object type and same access
rights, only write and read are supported.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>``
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Any matching rules will be mutated based on the packet reformat context
which is attached to that given flow rule.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A L3_TUNNEL_TO_L2 decap flow action requires to enable the encap bit on
the flow table, enable it if supported. This will allow to attach those
flow actions to NIC RX steering. We don't enable if running on a
representor.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Any matching packet will be stripped of it's VXLAN tunnel, only the inner
L2 onward is left. The user will receive the decapsulated packet.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>