- 02 2月, 2015 1 次提交
-
-
由 Linus Torvalds 提交于
Commit 8eb23b9f ("sched: Debug nested sleeps") added code to report on nested sleep conditions, which we generally want to avoid because the inner sleeping operation can re-set the thread state to TASK_RUNNING, but that will then cause the outer sleep loop not actually sleep when it calls schedule. However, that's actually valid traditional behavior, with the inner sleep being some fairly rare case (like taking a sleeping lock that normally doesn't actually need to sleep). And the debug code would actually change the state of the task to TASK_RUNNING internally, which makes that kind of traditional and working code not work at all, because now the nested sleep doesn't just sometimes cause the outer one to not block, but will cause it to happen every time. In particular, it will cause the cardbus kernel daemon (pccardd) to basically busy-loop doing scheduling, converting a laptop into a heater, as reported by Bruno Prémont. But there may be other legacy uses of that nested sleep model in other drivers that are also likely to never get converted to the new model. This fixes both cases: - don't set TASK_RUNNING when the nested condition happens (note: even if WARN_ONCE() only _warns_ once, the return value isn't whether the warning happened, but whether the condition for the warning was true. So despite the warning only happening once, the "if (WARN_ON(..))" would trigger for every nested sleep. - in the cases where we knowingly disable the warning by using "sched_annotate_sleep()", don't change the task state (that is used for all core scheduling decisions), instead use '->task_state_change' that is used for the debugging decision itself. (Credit for the second part of the fix goes to Oleg Nesterov: "Can't we avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the suggested change to use 'task_state_change' as part of the test) Reported-and-bisected-by: NBruno Prémont <bonbons@linux-vserver.org> Tested-by: NRafael J Wysocki <rjw@rjwysocki.net> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Ilya Dryomov <ilya.dryomov@inktank.com>, Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com>, Cc: Davidlohr Bueso <dave@stgolabs.net>, Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2015 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "i2c driver bugfixes (s3c2410, slave-eeprom, sh_mobile), size regression "bugfix" (i2c slave), documentation bugfix (st). Also, one documentation update (da9063), so some devicetrees can now be verified" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sh_mobile: terminate DMA reads properly i2c: Only include slave support if selected i2c: s3c2410: fix ABBA deadlock by keeping clock prepared i2c: slave-eeprom: fix boundary check when using sysfs i2c: st: Rename clock reference to something that exists DT: i2c: Add devices handled by the da9063 MFD driver
-
- 31 1月, 2015 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are two tiny patches, one fixing up the drivers/Kconfig file, and one adding a MAINTAINERS entry for the UIO git tree" * tag 'char-misc-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: drivers/Kconfig: remove duplicate entry for soc MAINTAINERS: add git url entry for UIO
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging tree fixes from Greg KH: "Here are two tiny staging tree fixes. One for the nvec driver to resolve a reported problem, and one to add a MAINTAINERS entry for the Android drivers" * tag 'staging-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add Android driver entries staging: nvec: specify a platform-device base id
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some small USB fixes and quirk additions for 3.19-rc7. All have been in linux-next for a while with no reported problems" * tag 'usb-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Add OTG PET device to TPL usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017 storage: Revise/fix quirk for 04E6:000F SCM USB-SCSI converter usb: phy: never defer probe in non-OF case usb: dwc2: call dwc2_is_controller_alive() under spinlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also an event groups fix, two PMU driver fixes and a CPU model variant addition" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Tighten (and fix) the grouping condition perf/x86/intel: Add model number for Airmont perf/rapl: Fix crash in rapl_scale() perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization perf probe: Fix probing kretprobes perf symbols: Introduce 'for' method to iterate over the symbols with a given name perf probe: Do not rely on map__load() filter to find symbols perf symbols: Introduce method to iterate symbols ordered by name perf symbols: Return the first entry with a given name in find_by_name method perf annotate: Fix memory leaks in LOCK handling perf annotate: Handle ins parsing failures perf scripting perl: Force to use stdbool perf evlist: Remove extraneous 'was' on error message
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fix from Chris Mason: "We have one more fix for btrfs in my for-linus branch - this was a bug in the new raid5/6 scrubbing support" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix raid56 scrub failed in xfstests btrfs/072
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull quota and UDF fix from Jan Kara: "A fix for UDF to properly free preallocated blocks and a fix for quota so that Q_GETQUOTA quotactl reports correct numbers for XFS filesystem (and similarly Q_XGETQUOTA quotactl works properly for other filesystems)" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units udf: Release preallocation on last writeable close
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "The ARM changes are largish, but not too scary. And a simple fix for x86 (bug introduced in 3.19)" (Paolo sayus these are the "Final" fixes. We'll see). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check LAPIC presence when building apic_map arm/arm64: KVM: Use kernel mapping to perform invalidation on page fault arm/arm64: KVM: Invalidate data cache on unmap arm/arm64: KVM: Use set/way op trapping to track the state of the caches
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: "Two small fixes for the Tegra GART IOMMU driver: - provide a .map_sg function for iommu_ops - do not register Tegra GART driver as a workaround because of issues with it when used from DRM code" * tag 'iommu-fixes-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/tegra: gart: Provide default ->map_sg() callback iommu/tegra: gart: Do not register with bus
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull intel and dp mst drm fixes from Dave Airlie: "Intel had a few more fixes lined up and no point me sitting on them, along with a DP MST fix from Rob for a race at undock + vt switch" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fix fb-helper vs MST dangling connector ptrs (v2) drm/i915: BDW Fix Halo PCI IDs marked as ULT. drm/i915: Fix and clean BDW PCH identification drm/i915: Only fence tiled region of object. drm/i915: fix inconsistent brightness after resume drm/i915: Init PPGTT before context enable
-
由 Guenter Roeck 提交于
Fix misspelled define. Fixes: 33692f27 ("vm: add VM_FAULT_SIGSEGV handling support") Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wolfram Sang 提交于
DMA read requests could miss proper termination, so two more bytes would have been read via PIO overwriting the end of the buffer with wrong data. Make DMA stop handling more readable while we are here. Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 30 1月, 2015 14 次提交
-
-
由 Radim Krčmář 提交于
We forgot to re-check LAPIC after splitting the loop in commit 173beedc (KVM: x86: Software disabled APIC should still deliver NMIs, 2014-11-02). Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Fixes: 173beedcSigned-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-arm-fixes-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master Second round of fixes for KVM/ARM for 3.19. Fixes memory corruption issues on APM platforms and swapping issues on DMA-coherent systems.
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
misc i915 fixes, mostly all stable material as well. * tag 'drm-intel-fixes-2015-01-29' of git://anongit.freedesktop.org/drm-intel: drm/i915: BDW Fix Halo PCI IDs marked as ULT. drm/i915: Fix and clean BDW PCH identification drm/i915: Only fence tiled region of object. drm/i915: fix inconsistent brightness after resume drm/i915: Init PPGTT before context enable
-
由 Rob Clark 提交于
VT switch back/forth from console to xserver (for example) has potential to go horribly wrong if a dynamic DP MST connector ends up in the saved modeset that is restored when switching back to fbcon. When removing a dynamic connector, don't forget to clean up the saved state. v1: original v2: null out set->fb if no more connectors to avoid making i915 cranky Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1184968 Cc: stable@vger.kernel.org #v3.17+ Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "One stable fix for a dm-cache 3.19-rc6 regression and one stable fix for dm-thin: - fix DM cache metadata open/lookup error paths to properly use ERR_PTR and IS_ERR (fixes: 3.19-rc6 "stable" commit 9b1cc9f2) - fix DM thin-provisioning to disallow userspace from sending messages to the thin-pool if the pool is in READ_ONLY or FAIL mode since no metadata changes are allowed in these modes" * tag 'dm-3.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode dm cache: fix missing ERR_PTR returns and handling
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Stable fix for a NFSv4.1 Oops on mount - Stable fix for an O_DIRECT deadlock condition - Fix an issue with submounted volumes and fake duplicate inode numbers" * tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix use of nfs_attr_use_mounted_on_fileid() NFSv4.1: Fix an Oops in nfs41_walk_client_list nfs: fix dio deadlock when O_DIRECT flag is flipped
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fixes from Sage Weil: "These paches from Ilya finally squash a race condition with layered images that he's been chasing for a while" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: drop parent_ref in rbd_dev_unprobe() unconditionally rbd: fix rbd_dev_parent_get() when parent_overlap == 0
-
由 Marc Zyngier 提交于
When handling a fault in stage-2, we need to resync I$ and D$, just to be sure we don't leave any old cache line behind. That's very good, except that we do so using the *user* address. Under heavy load (swapping like crazy), we may end up in a situation where the page gets mapped in stage-2 while being unmapped from userspace by another CPU. At that point, the DC/IC instructions can generate a fault, which we handle with kvm->mmu_lock held. The box quickly deadlocks, user is unhappy. Instead, perform this invalidation through the kernel mapping, which is guaranteed to be present. The box is much happier, and so am I. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
Let's assume a guest has created an uncached mapping, and written to that page. Let's also assume that the host uses a cache-coherent IO subsystem. Let's finally assume that the host is under memory pressure and starts to swap things out. Before this "uncached" page is evicted, we need to make sure we invalidate potential speculated, clean cache lines that are sitting there, or the IO subsystem is going to swap out the cached view, loosing the data that has been written directly into memory. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This batch ended up being larger than wished, but there is nothing to worry too much there. Most of commits are for ASoC, a compress NULL dereference fix, a fix for probe error handling, and the rest are device-specific fixes. In addition, we have a fix for a long-standing but of seq-dummy driver, which just cuts off the buggy part in the end" * tag 'sound-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq-dummy: remove deadlock-causing events on close ASoC: omap-mcbsp: Correct CBM_CFS dai format configuration ASoC: soc-compress.c: fix NULL dereference ASoC: rt286: set the same format for dac and adc ASoC: wm8904: fix runtime warning ASoC: simple-card: Fix crash in asoc_simple_card_unref() ASoC: fsl: imx-wm8962: Set the card owner field ASoC: pcm512x: Fix DSP program selection ASoC: rt5677: Modify the behavior that updates the PLL parameter. ASoC: fsl_ssi: Fix irq error check ASoC: rockchip: i2s: applys rate symmetry for CPU DAI ASoC: Intel: Add NULL checks for the stream pointer ASoC: wm8960: Fix capture sample rate from 11250 to 11025 ASoC: adi: Add missing return statement. ASoC: Intel: Don't change offset of block allocator during fixed allocate ASoC: ts3a227e: Check and report jack status at probe ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registers
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull final pin control fix from Linus Walleij: "A late pin control fix for the v3.19 series: The AT91 gpio controller would miss wakeup events, this single fix make it work properly" [ "Final"? Yeah, I'll believe that once I've actually released 3.19 ;) - Linus ] * tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: at91: allow to have disabled gpio bank
-
由 Linus Torvalds 提交于
The stack guard page error case has long incorrectly caused a SIGBUS rather than a SIGSEGV, but nobody actually noticed until commit fee7e49d ("mm: propagate error from stack expansion even for guard page") because that error case was never actually triggered in any normal situations. Now that we actually report the error, people noticed the wrong signal that resulted. So far, only the test suite of libsigsegv seems to have actually cared, but there are real applications that use libsigsegv, so let's not wait for any of those to break. Reported-and-tested-by: NTakashi Iwai <tiwai@suse.de> Tested-by: NJan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: NTakashi Iwai <tiwai@suse.de> Tested-by: NJan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 1月, 2015 13 次提交
-
-
由 Joe Thornber 提交于
You can't modify the metadata in these modes. It's better to fail these messages immediately than let the block-manager deny write locks on metadata blocks. Otherwise these failed metadata changes will trigger 'needs_check' to get set in the metadata superblock -- requiring repair using the thin_check utility. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Joe Thornber 提交于
Commit 9b1cc9f2 ("dm cache: share cache-metadata object across inactive and active DM tables") mistakenly ignored the use of ERR_PTR returns. Restore missing IS_ERR checks and ERR_PTR returns where appropriate. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: " User visible fixes: - Fix probing at function return (Namhyumg Kim) Developer visible fixes: - Symbol processing changes necessary for fixing support for kretprobes in 'perf probe' (Namhyung Kim, Arnaldo Carvalho de Melo) - Annotation memory leaks and instruction parsing fixes (Rabin Vincent) - Fix perl build on ARM64 (Wang Nam) " Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ilya Dryomov 提交于
This effectively reverts the last hunk of 392a9dad ("rbd: detect when clone image is flattened"). The problem with parent_overlap != 0 condition is that it's possible and completely valid to have an image with parent_overlap == 0 whose parent state needs to be cleaned up on unmap. The next commit, which drops the "clone image now standalone" logic, opens up another window of opportunity to hit this, but even without it # cat parent-ref.sh #!/bin/bash rbd create --image-format 2 --size 1 foo rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar rbd resize --allow-shrink --size 0 bar rbd resize --size 1 bar DEV=$(rbd map bar) rbd unmap $DEV leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client hanging around. My thinking behind calling rbd_dev_parent_put() unconditionally is that there shouldn't be any requests in flight at that point in time as we are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused by flatten is delayed by in-flight requests, it will have finished by the time we reach rbd_dev_unprobe() caused by unmap, thus turning unconditional rbd_dev_parent_put() into a no-op. Fixes: http://tracker.ceph.com/issues/10352 Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: NIlya Dryomov <idryomov@redhat.com> Reviewed-by: NJosh Durgin <jdurgin@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Ilya Dryomov 提交于
The comment for rbd_dev_parent_get() said * We must get the reference before checking for the overlap to * coordinate properly with zeroing the parent overlap in * rbd_dev_v2_parent_info() when an image gets flattened. We * drop it again if there is no overlap. but the "drop it again if there is no overlap" part was missing from the implementation. This lead to absurd parent_ref values for images with parent_overlap == 0, as parent_ref was incremented for each img_request and virtually never decremented. Fix this by leveraging the fact that refresh path calls rbd_dev_v2_parent_info() under header_rwsem and use it for read in rbd_dev_parent_get(), instead of messing around with atomics. Get rid of barriers in rbd_dev_v2_parent_info() while at it - I don't see what they'd pair with now and I suspect we are in a pretty miserable situation as far as proper locking goes regardless. Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: NIlya Dryomov <idryomov@redhat.com> Reviewed-by: NJosh Durgin <jdurgin@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Peter Zijlstra 提交于
The fix from 9fc81d87 ("perf: Fix events installation during moving group") was incomplete in that it failed to recognise that creating a group with events for different CPUs is semantically broken -- they cannot be co-scheduled. Furthermore, it leads to real breakage where, when we create an event for CPU Y and then migrate it to form a group on CPU X, the code gets confused where the counter is programmed -- triggered in practice as well by me via the perf fuzzer. Fix this by tightening the rules for creating groups. Only allow grouping of counters that can be co-scheduled in the same context. This means for the same task and/or the same cpu. Fixes: 9fc81d87 ("perf: Fix events installation during moving group") Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kan Liang 提交于
Intel Airmont supports the same architectural and non-architectural performance monitoring events as Silvermont. Signed-off-by: NKan Liang <kan.liang@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1421913053-99803-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
This patch fixes a systematic crash in rapl_scale() due to an invalid pointer. The bug was introduced by commit: 89cbc767 ("x86: Replace __get_cpu_var uses") The fix is simple. Just put the parenthesis where it needs to be, i.e., around rapl_pmu. To my surprise, the compiler was not complaining about passing an integer instead of a pointer. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Tested-by: NVince Weaver <vincent.weaver@maine.edu> Fixes: 89cbc767 ("x86: Replace __get_cpu_var uses") Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: cl@linux.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150122203834.GA10228@thinkpadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kan Liang 提交于
There were some issues about the uncore driver tried to access non-existing boxes, which caused boot crashes. These issues have been all fixed. But we should avoid boot failures if that ever happens again. This patch intends to prevent this kind of potential issues. It moves uncore_box_init out of driver initialization. The box will be initialized when it's first enabled. Signed-off-by: NKan Liang <kan.liang@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421729665-5912-1-git-send-email-kan.liang@intel.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jan Kara 提交于
Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. CC: stable@vger.kernel.org Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Commit 6fb1ca92 "udf: Fix race between write(2) and close(2)" changed the condition when preallocation is released. The idea was that we don't want to release the preallocation for an inode on close when there are other writeable file descriptors for the inode. However the condition was written in the opposite way so we released preallocation only if there were other writeable file descriptors. Fix the problem by changing the condition properly. CC: stable@vger.kernel.org Fixes: 6fb1ca92Reported-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NJan Kara <jack@suse.cz>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This feels larger than I'd like but its for three reasons. a) amdkfd finalising the API more, this is a new feature introduced last merge window, and I'd prefer to make the tweaks to the API before it first gets into a stable release. b) radeon regression required splitting an internal API to fix properly, so it just changed a few more lines c) vmwgfx fix changes a lock from a mutex->spin lock, this is fallout from the new sleep checking. Otherwise there is just some tda998x fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Remove rdev->gart.pages_addr array drm/radeon: Restore GART table contents after pinning it in VRAM v3 drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry drm/amdkfd: Fix bug in call to init_pipelines() drm/amdkfd: Fix bug in pipelines initialization drm/radeon: Don't increment pipe_id in kgd_init_pipeline drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address drm/vmwgfx: Replace the hw mutex with a hw spinlock drm/amdkfd: Allow user to limit only queues per device drm/amdkfd: PQM handle queue creation fault drm: tda998x: Fix EDID read timeout on HDMI connect drm: tda998x: Protect the page register
-
由 Gui Hecheng 提交于
The xfstests btrfs/072 reports uncorrectable read errors in dmesg, because scrub forgets to use commit_root for parity scrub routine and scrub attempts to scrub those extents items whose contents are not fully on disk. To fix it, we just add the @search_commit_root flag back. Signed-off-by: NGui Hecheng <guihc.fnst@cn.fujitsu.com> Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: NMiao Xie <miaoxie@huawei.com> Signed-off-by: NChris Mason <clm@fb.com>
-