- 24 3月, 2021 2 次提交
-
-
由 Matt Roper 提交于
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN() in the display code to use DISPLAY_VER() comparisons instead. The following semantic patch was used: @@ expression dev_priv, E; @@ - INTEL_GEN(dev_priv) == E + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; @@ - INTEL_GEN(dev_priv) + DISPLAY_VER(dev_priv) @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_DISPLAY_RANGE(dev_priv, from, until) There are still some display-related uses of INTEL_GEN() in intel_pm.c (watermark code) and i915_irq.c. Those will be updated separately. v2: - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani) Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
ILK is the only platform that we consider "gen5" and SNB is the only platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then replace numeric platform tests for these two generations with direct platform tests with the following Coccinelle semantic patch: @@ expression dev_priv; @@ - IS_GEN(dev_priv, 5) + IS_IRONLAKE(dev_priv) @@ expression dev_priv; @@ - IS_GEN(dev_priv, 6) + IS_SANDYBRIDGE(dev_priv) @@ expression dev_priv; @@ - IS_GEN_RANGE(dev_priv, 5, 6) + IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv) This will simplify our upcoming patches which eliminate INTEL_GEN() usage in the display code. v2: - Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville) - Rebase + regenerate from semantic patch Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
-
- 23 3月, 2021 1 次提交
-
-
由 Jani Nikula 提交于
Use the correct DSS CTL registers for ICL DSI transcoders. As a side effect, this also brings back the sanity check for trying to use pipe DSC registers on pipe A on ICL. Fixes: 8a029c11 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave") References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com
-
- 22 3月, 2021 5 次提交
-
-
由 Ville Syrjälä 提交于
The enabled_planes bitmask was supposed to track logically enabled planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting even disabled planes into the bitmask since intel_plane_atomic_check_with_state() only takes the early exit if the plane was disabled and stays disabled. I think I misread the early said codepath to exit whenever the plane is logically disabled, which is not true. So let's fix this up properly and set the bit only when the plane actually is logically enabled. Cc: Manasi Navare <manasi.d.navare@intel.com> Fixes: ee42ec19 ("drm/i915: Track logically enabled planes for hw state") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>
-
由 Anshuman Gupta 提交于
hdcp2_enable_stream_encryption shouldn't get called in case of any port authentication or encryption error, though hdcp2_enable_stream_encryption checks for link encryption before enabling stream encryption and returns error but this return error code won't be correct in case of any error due to port authentication and encryption. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-4-anshuman.gupta@intel.com
-
由 Anshuman Gupta 提交于
When stream encryption enabling fails due to Link encryption status has stopped, prepare HDCP2 for recovery by disabling port authentication and encryption such that it can re-attempt port authentication and encryption. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-3-anshuman.gupta@intel.com
-
由 Anshuman Gupta 提交于
DP MST Link Check performed only for the connector involved with HDCP port authentication and encryption, for other connector it simply returns link check with true and update the uevent. Therefore in case of HDCP 2.2 link failure, disable HDCP encryption and de-authenticate the port so next time it can enable port authentication and encryption. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319100208.5886-2-anshuman.gupta@intel.com
-
由 Anshuman Gupta 提交于
It requires to check streams type1 capability in mst topology by checking Rxinfo instead connector HDCP2.x capability in order to enforce type0 stream encryption in a mix of HDCP {1.x,2.x} mst topology. Rxcaps always shows HDCP 2.x capability of immediate downstream connector. Let's use Rxinfo HDCP1_DEVICE_DOWNSTREAM bit to detect a HDCP {1.x,2.x} mix mst topology. Cc: Sean Paul <seanpaul@chromium.org> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319091732.17547-1-anshuman.gupta@intel.com
-
- 20 3月, 2021 7 次提交
-
-
由 Ville Syrjälä 提交于
s/intel_/g4x_/ for the externally visible g4x_{dp,hdmi}.c functions. Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-8-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Extract the g4x+ HDMI low level code to its own file, leaving intel_hdmi.c to deal with higher level issues. The infoframe support I decided to leave in intel_hdmi.c since I think we need to move that as a whole to its own file. It is after all used also for DP SDPs, so no longer HDMI specific. Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-7-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Move the g4x+ DP code into a new file. This will leave mostly platform agnostic code in intel_dp.c. Well, the misplaced phy test stuff pretty much ruins that, but let's squint real hard for now. v2: Add comment exlaining which platforms are covered (Daniel) Leave intel_dp_unused_lane_mask() be since it is pretty generic Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-6-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Most of intel_dp_encoder_reset() is for pre-ddi platforms. Make a clean split. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-5-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
intel_dp_program_link_training_pattern() clearly belongs in intel_dp_link_training.c. Make it so. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-4-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
If we ever get here with bogus signal levels we've messed up somewhere earlier. Just use MISSING_CASE(). Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-3-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
If we ever get here with TPS3 then intel_dp_training_pattern() is just broken. Replace the careful fallback with just MISSING_CASE(). Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-2-ville.syrjala@linux.intel.com
-
- 19 3月, 2021 4 次提交
-
-
由 Imre Deak 提交于
By the specification the 0xF0000 - 0xF02FF range is only valid if the LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support otherwise. Fixes: 7b2a4ab8 ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com
-
由 Imre Deak 提交于
By the specification the 0xF0000-0xF02FF range is only valid when the DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so. Trying to detect LTTPRs returned corrupted values for the above DPCD range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD revision 1.2 connected. v2: Add the actual version check. v3: Fix s/DRPX/DPRX/ typo. Fixes: 7b2a4ab8 ("drm/i915: Switch to LTTPR transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com
-
由 Imre Deak 提交于
The spec requires to use at least 3.2ms for the AUX timeout period if there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming spec update makes this more specific, by requiring a 3.2ms minimum timeout period for the LTTPR detection reading the 0xF0000-0xF0007 range (3.6.5.1). Accordingly disable LTTPR detection until GLK, where the maximum timeout we can set is only 1.6ms. Link training in the non-transparent mode is known to fail at least on some SKL systems with a WD19 dock on the link, which exposes an LTTPR (see the References below). While this could have different reasons besides the too short AUX timeout used, not detecting LTTPRs (and so not using the non-transparent LT mode) fixes link training on these systems. While at it add a code comment about the platform specific maximum timeout values. v2: Add a comment about the g4x maximum timeout as well. (Ville) Reported-by: NTakashi Iwai <tiwai@suse.de> Reported-and-tested-by: NSantiago Zarate <santiago.zarate@suse.com> Reported-and-tested-by: NBodo Graumann <mail@bodograumann.de> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 Fixes: b30edfd8 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: <stable@vger.kernel.org> # v5.11 Cc: Takashi Iwai <tiwai@suse.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
-
由 Bhaskar Chowdhury 提交于
s/nothign/nothing/ Signed-off-by: NBhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210319043701.14105-1-unixbhaskar@gmail.com
-
- 18 3月, 2021 15 次提交
-
-
由 Ankit Nautiyal 提交于
Remove code for resetting frl related members from intel_disable_dp, as this is not applicable for older platforms. Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210309043915.1921-3-ankit.k.nautiyal@intel.com
-
由 Jani Nikula 提交于
Add intel_bios_encoder_data pointer to encoder, and use it for hdmi and dp iboost. For starters, we only set the encoder->devdata for DDI encoders, i.e. we can only use it for data that is used by DDI encoders. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4bc49244ce68e136e5b21db4c4e6554bec9ac0fb.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Stop caching the information in ddi_port_info. We're phasing out ddi_port_info usage completely, and prefer using the VBT child device information directly using the provided helpers. v2: - Remove supports_typec_usb & supports_tbt from ddi_vbt_port_info (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b04bd183e7554aeb4bc3962af90d63171aa32fc2.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Start using struct intel_bios_encoder_data directly. We'll start sanitizing the child device data directly as well, instead of the cached data in ddi_port_info[]. The one downside here is having to store a non-const pointer back to intel_bios_encoder_data. Eventually we'll be able to have a direct pointer from encoder to intel_bios_encoder_data, removing the need to go through the ddi_port_info[] array altogether. And we'll be able to remove all the cached data in ddi_port_info[]. v2: - Remove supports_dp and supports_edp from ddi_port_info too - Add devdata != NULL check in intel_bios_is_port_edp() Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1 Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/061df32a012ff640060920fcd730fb23f8717ee8.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
We'll be needing the intel_bios_encoder_data pointer going forward, and it's just easier to store the higher level pointer in the ddi_vbt_port_info[] array. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/89717516e99afccfecf1a7c6c938b8349f65e985.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
These will be exposed to the rest of the driver and replace other functions. Everything will operate on the child devices. v2: - Rebased, removed stray blank line - Also abstracted intel_bios_encoder_supports_crt (Lucas) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2bd40ccc093796d16300742d1789d78ffac3c450.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
We'll be needing it in the future. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/026b737b122273d256f4247e9b0c84529aa391fd.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Make the naming suitable for exposing to the rest of the driver as an opaque type. No functional changes. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cb97c858de6e6afa96092db6d96e685fda006984.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Instead of initialing data directly in ddi_port_info array, create fake child devices for default outputs when the VBT is missing. This makes further unification of output handling easier. This will make intel_bios_is_port_present() return true for the fake child devices. This may cause subtle changes in a handful of places. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/91675b40a78bd04bf138598d979661257181880d.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
There are two main cases where the default outputs are useful when the VBT is missing: - There are some DDI-platform Chromebooks out there that do not have a VBT, which worked by coincidence because of the default outputs. The machines need to continue to work. - Early platform enabling when the VBT might not be available. (This could be circumvented by using the i915.vbt_firmware parameter.) Prepare for generating fake child devices for the default outputs by limiting the number of outputs. We don't want to generate excessive amounts of fake child devices. This could be perhaps be limited even more in the future, but match what's possible on all DDI platforms. Note that limiting the defaults to non-TypeC ports in commit 828ccb31 ("drm/i915/icl: Add TypeC ports only if VBT is present") is a more strict limit, and makes this a no-op on recent platforms. v2: Rewrote commit message Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c9c9743af1c7265a2c976d582b7a6685ec0c414.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Pre-DDI and non-CHV aren't using the information created here anyway, so don't bother setting the defaults for them. This should be a non-functional change, but is separated here to catch any regressions in a single commit. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/41526a4eee5fb0de8d7f1ffe4c09965b63ccbaa8.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Unify the code paths at the higher level. Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/44559ef456015f65a863c3d89a9bea9157d13a05.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Reduce indent with an early return. No functional changes. Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> [Jani: fixed a couple of comment typos while applying.] Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/17288137452f731a820e737582672f836660a26f.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
We'll be needing the version in more places in the future, so avoid the need to pass it around. No functional changes. v2: Rebased Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c2a4189241bf0946d27e12804b1ba7d098c7d483.1615998927.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Time to just yank out the bandage. No functional changes. v2: Rebased Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1 Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/93fe9e8be2e6120b085d09e49aafdf52f5ccd725.1615998927.git.jani.nikula@intel.com
-
- 15 3月, 2021 2 次提交
-
-
由 Sean Paul 提交于
One instance of DRM_DEBUG_KMS was leftover in dp_link_training, convert it to the new shiny. Signed-off-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210310214845.29021-2-sean@poorly.run
-
由 Sean Paul 提交于
This patch adds some newlines which are missing from debug messages. This will prevent logs from being stacked up in dmesg. Signed-off-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210310214845.29021-1-sean@poorly.run
-
- 13 3月, 2021 1 次提交
-
-
由 Ville Syrjälä 提交于
Rename a bunch of the skl+ watermark struct members to have sensible names. Avoids me having to think what plane_res_b/etc. means. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-7-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
- 12 3月, 2021 1 次提交
-
-
由 Ville Syrjälä 提交于
Let's check that we actually found the PLL before doing the port_clock readout, just in case the hardware was severly misprogrammed by the previous guy. Not sure the hw would even survive such misprogramming without hanging but no real harm in checking anyway. Cc: Karthik B S <karthik.b.s@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210310194351.6233-1-ville.syrjala@linux.intel.comReviewed-by: NKarthik B S <karthik.b.s@intel.com>
-
- 09 3月, 2021 2 次提交
-
-
由 Ville Syrjälä 提交于
Now that all the encoder clock stuff is uniformly abstracted for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping() to cover all of them. Not sure there is a particular benefit in doing so, but less special cases always makes me happy. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>
-
由 Ville Syrjälä 提交于
Support reading out the current state of the DDI clock. Not sure we really want this. Seems a bit excessive just to restore the debug print to icl_sanitize_encoder_pll_mapping()? But maybe there's more use for it? Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-6-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>
-