- 19 3月, 2018 26 次提交
-
-
由 Christoffer Dall 提交于
SPSR_EL1 is not used by a VHE host kernel and can be deferred, but we need to rework the accesses to this register to access the latest value depending on whether or not guest system registers are loaded on the CPU or only reside in memory. The handling of accessing the various banked SPSRs for 32-bit VMs is a bit clunky, but this will be improved in following patches which will first prepare and subsequently implement deferred save/restore of the 32-bit registers, including the 32-bit SPSRs. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We currently handle 32-bit accesses to trapped VM system registers using the 32-bit index into the coproc array on the vcpu structure, which is a union of the coproc array and the sysreg array. Since all the 32-bit coproc indices are created to correspond to the architectural mapping between 64-bit system registers and 32-bit coprocessor registers, and because the AArch64 system registers are the double in size of the AArch32 coprocessor registers, we can always find the system register entry that we must update by dividing the 32-bit coproc index by 2. This is going to make our lives much easier when we have to start accessing system registers that use deferred save/restore and might have to be read directly from the physical CPU. Reviewed-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
On non-VHE systems we need to save the ELR_EL2 and SPSR_EL2 so that we can return to the host in EL1 in the same state and location where we issued a hypercall to EL2, but on VHE ELR_EL2 and SPSR_EL2 are not useful because we never enter a guest as a result of an exception entry that would be directly handled by KVM. The kernel entry code already saves ELR_EL1/SPSR_EL1 on exception entry, which is enough. Therefore, factor out these registers into separate save/restore functions, making it easy to exclude them from the VHE world-switch path later on. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
There is no need to have multiple identical functions with different names for saving host and guest state. When saving and restoring state for the host and guest, the state is the same for both contexts, and that's why we have the kvm_cpu_context structure. Delete one version and rename the other into simply save/restore. Reviewed-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
The comment only applied to SPE on non-VHE systems, so we simply remove it. Suggested-by: NAndrew Jones <drjones@redhat.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
As we are about to handle system registers quite differently between VHE and non-VHE systems. In preparation for that, we need to split some of the handling functions between VHE and non-VHE functionality. For now, we simply copy the non-VHE functions, but we do change the use of static keys for VHE and non-VHE functionality now that we have separate functions. Reviewed-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
As we are about to move calls around in the sysreg save/restore logic, let's first rewrite the alternative function callers, because it is going to make the next patches much easier to read. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
There's a semantic difference between the EL1 registers that control operation of a kernel running in EL1 and EL1 registers that only control userspace execution in EL0. Since we can defer saving/restoring the latter, move them into their own function. The ARMv8 ARM (ARM DDI 0487C.a) Section D10.2.1 recommends that ACTLR_EL1 has no effect on the processor when running the VHE host, and we can therefore move this register into the EL1 state which is only saved/restored on vcpu_put/load for a VHE host. We also take this chance to rename the function saving/restoring the remaining system register to make it clear this function deals with the EL1 system registers. Reviewed-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
The VHE switch function calls __timer_enable_traps and __timer_disable_traps which don't do anything on VHE systems. Therefore, simply remove these calls from the VHE switch function and make the functions non-conditional as they are now only called from the non-VHE switch path. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
There is no need to reset the VTTBR to zero when exiting the guest on VHE systems. VHE systems don't use stage 2 translations for the EL2&0 translation regime used by the host. Reviewed-by: NAndrew Jones <drjones@redhat.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
VHE kernels run completely in EL2 and therefore don't have a notion of kernel and hyp addresses, they are all just kernel addresses. Therefore don't call kern_hyp_va() in the VHE switch function. Reviewed-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
So far this is mostly (see below) a copy of the legacy non-VHE switch function, but we will start reworking these functions in separate directions to work on VHE and non-VHE in the most optimal way in later patches. The only difference after this patch between the VHE and non-VHE run functions is that we omit the branch-predictor variant-2 hardening for QC Falkor CPUs, because this workaround is specific to a series of non-VHE ARMv8.0 CPUs. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
The current world-switch function has functionality to detect a number of cases where we need to fixup some part of the exit condition and possibly run the guest again, before having restored the host state. This includes populating missing fault info, emulating GICv2 CPU interface accesses when mapped at unaligned addresses, and emulating the GICv3 CPU interface on systems that need it. As we are about to have an alternative switch function for VHE systems, but VHE systems still need the same early fixup logic, factor out this logic into a separate function that can be shared by both switch functions. No functional change. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
Instead of having multiple calls from the world switch path to the debug logic, each figuring out if the dirty bit is set and if we should save/restore the debug registers, let's just provide two hooks to the debug save/restore functionality, one for switching to the guest context, and one for switching to the host context, and we get the benefit of only having to evaluate the dirty flag once on each path, plus we give the compiler some more room to inline some of this functionality. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
The debug save/restore functions can be improved by using the has_vhe() static key instead of the instruction alternative. Using the static key uses the same paradigm as we're going to use elsewhere, it makes the code more readable, and it generates slightly better code (no stack setups and function calls unless necessary). We also use a static key on the restore path, because it will be marginally faster than loading a value from memory. Finally, we don't have to conditionally clear the debug dirty flag if it's set, we can just clear it. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
There is no need to figure out inside the world-switch if we should save/restore the debug registers or not, we might as well do that in the higher level debug setup code, making it easier to optimize down the line. Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We have numerous checks around that checks if the HCR_EL2 has the RW bit set to figure out if we're running an AArch64 or AArch32 VM. In some cases, directly checking the RW bit (given its unintuitive name), is a bit confusing, and that's not going to improve as we move logic around for the following patches that optimize KVM on AArch64 hosts with VHE. Therefore, introduce a helper, vcpu_el1_is_32bit, and replace existing direct checks of HCR_EL2.RW with the helper. Reviewed-by: NJulien Grall <julien.grall@arm.com> Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
As we are about to move a bunch of save/restore logic for VHE kernels to the load and put functions, we need some infrastructure to do this. Reviewed-by: NAndrew Jones <drjones@redhat.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We currently have a separate read-modify-write of the HCR_EL2 on entry to the guest for the sole purpose of setting the VF and VI bits, if set. Since this is most rarely the case (only when using userspace IRQ chip and interrupts are in flight), let's get rid of this operation and instead modify the bits in the vcpu->arch.hcr[_el2] directly when needed. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Shih-Wei Li 提交于
We always set the IMO and FMO bits in the HCR_EL2 when running the guest, regardless if we use the vgic or not. By moving these flags to HCR_GUEST_FLAGS we can avoid one of the extra save/restore operations of HCR_EL2 in the world switch code, and we can also soon get rid of the other one. This is safe, because even though the IMO and FMO bits control both taking the interrupts to EL2 and remapping ICC_*_EL1 to ICV_*_EL1 when executed at EL1, as long as we ensure that these bits are clear when running the EL1 host, we're OK, because we reset the HCR_EL2 to only have the HCR_RW bit set when returning to EL1 on non-VHE systems. Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NShih-Wei Li <shihwei@cs.columbia.edu> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
VHE actually doesn't rely on clearing the VTTBR when returning to the host kernel, and that is the current key mechanism of hyp_panic to figure out how to attempt to return to a state good enough to print a panic statement. Therefore, we split the hyp_panic function into two functions, a VHE and a non-VHE, keeping the non-VHE version intact, but changing the VHE behavior. The vttbr_el2 check on VHE doesn't really make that much sense, because the only situation where we can get here on VHE is when the hypervisor assembly code actually called into hyp_panic, which only happens when VBAR_EL2 has been set to the KVM exception vectors. On VHE, we can always safely disable the traps and restore the host registers at this point, so we simply do that unconditionally and call into the panic function directly. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
We already have the percpu area for the host cpu state, which points to the VCPU, so there's no need to store the VCPU pointer on the stack on every context switch. We can be a little more clever and just use tpidr_el2 for the percpu offset and load the VCPU pointer from the host context. This has the benefit of being able to retrieve the host context even when our stack is corrupted, and it has a potential performance benefit because we trade a store plus a load for an mrs and a load on a round trip to the guest. This does require us to calculate the percpu offset without including the offset from the kernel mapping of the percpu array to the linear mapping of the array (which is what we store in tpidr_el1), because a PC-relative generated address in EL2 is already giving us the hyp alias of the linear mapping of a kernel address. We do this in __cpu_init_hyp_mode() by using kvm_ksym_ref(). The code that accesses ESR_EL2 was previously using an alternative to use the _EL1 accessor on VHE systems, but this was actually unnecessary as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2 accessor does the same thing on both systems. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
Moving the call to vcpu_load() in kvm_arch_vcpu_ioctl_run() to after we've called kvm_vcpu_first_run_init() simplifies some of the vgic and there is also no need to do vcpu_load() for things such as handling the immediate_exit flag. Reviewed-by: NJulien Grall <julien.grall@arm.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Christoffer Dall 提交于
Calling vcpu_load() registers preempt notifiers for this vcpu and calls kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy lifting on arm/arm64 and will try to do things such as enabling the virtual timer and setting us up to handle interrupts from the timer hardware. Loading state onto hardware registers and enabling hardware to signal interrupts can be problematic when we're not actually about to run the VCPU, because it makes it difficult to establish the right context when handling interrupts from the timer, and it makes the register access code difficult to reason about. Luckily, now when we call vcpu_load in each ioctl implementation, we can simply remove the call from the non-KVM_RUN vcpu ioctls, and our kvm_arch_vcpu_load() is only used for loading vcpu content to the physical CPU when we're actually going to run the vcpu. Reviewed-by: NJulien Grall <julien.grall@arm.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 26 2月, 2018 12 次提交
-
-
由 Shanker Donthineni 提交于
In AArch64/AArch32, the virtual counter uses a fixed virtual offset of zero in the following situations as per ARMv8 specifications: 1) HCR_EL2.E2H is 1, and CNTVCT_EL0/CNTVCT are read from EL2. 2) HCR_EL2.{E2H, TGE} is {1, 1}, and either: — CNTVCT_EL0 is read from Non-secure EL0 or EL2. — CNTVCT is read from Non-secure EL0. So, no need to zero CNTVOFF_EL2/CNTVOFF for VHE case. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NShanker Donthineni <shankerd@codeaurora.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Jérémy Fanguède 提交于
Set the handlers to emulate read and write operations for CNTP_CTL, CNTP_CVAL and CNTP_TVAL registers in such a way that VMs can use the physical timer. Signed-off-by: NJérémy Fanguède <j.fanguede@virtualopensystems.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Jérémy Fanguède 提交于
Some 32bits guest OS can use the CNTP timer, however KVM does not handle the accesses, injecting a fault instead. Use the proper handlers to emulate the EL1 Physical Timer (CNTP) register accesses of AArch32 guests. Signed-off-by: NJérémy Fanguède <j.fanguede@virtualopensystems.com> Signed-off-by: NAlvise Rigo <a.rigo@virtualopensystems.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Dave Martin 提交于
The HCR_EL2.TID3 flag needs to be set when trapping guest access to the CPU ID registers is required. However, the decision about whether to set this bit does not need to be repeated at every switch to the guest. Instead, it's sufficient to make this decision once and record the outcome. This patch moves the decision to vcpu_reset_hcr() and records the choice made in vcpu->arch.hcr_el2. The world switch code can then load this directly when switching to the guest without the need for conditional logic on the critical path. Signed-off-by: NDave Martin <Dave.Martin@arm.com> Suggested-by: NChristoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Mark Rutland 提交于
We don't currently limit guest accesses to the LOR registers, which we neither virtualize nor context-switch. As such, guests are provided with unusable information/controls, and are not isolated from each other (or the host). To prevent these issues, we can trap register accesses and present the illusion LORegions are unssupported by the CPU. To do this, we mask ID_AA64MMFR1.LO, and set HCR_EL2.TLOR to trap accesses to the following registers: * LORC_EL1 * LOREA_EL1 * LORID_EL1 * LORN_EL1 * LORSA_EL1 ... when trapped, we inject an UNDEFINED exception to EL1, simulating their non-existence. As noted in D7.2.67, when no LORegions are implemented, LoadLOAcquire and StoreLORelease must behave as LoadAcquire and StoreRelease respectively. We can ensure this by clearing LORC_EL1.EN when a CPU's EL2 is first initialized, as the host kernel will not modify this. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: kvmarm@lists.cs.columbia.edu Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Linus Torvalds 提交于
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull Xtensa fixes from Max Filippov: "Two fixes for reserved memory/DMA buffers allocation in high memory on xtensa architecture - fix memory accounting when reserved memory is in high memory region - fix DMA allocation from high memory" * tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: support DMA buffers in high memory xtensa: fix high memory/reserved memory collision
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A small set of fixes: - UAPI data type correction for hyperv - correct the cpu cores field in /proc/cpuinfo on CPU hotplug - return proper error code in the resctrl file system failure path to avoid silent subsequent failures - correct a subtle accounting issue in the new vector allocation code which went unnoticed for a while and caused suspend/resume failures" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations x86/topology: Fix function name in documentation x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system x86/apic/vector: Handle vector release on CPU unplug correctly genirq/matrix: Handle CPU offlining proper x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fix from Thomas Gleixner: "A single commit which shuts up a bogus GCC-8 warning" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Thomas Gleixner: "Three patches to fix memory ordering issues on ALPHA and a comment to clarify the usage scope of a mutex internal function" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() locking/mutex: Add comment to __mutex_owner() to deter usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull cleanup patchlet from Thomas Gleixner: "A single commit removing a bunch of bogus double semicolons all over the tree" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide/trivial: Remove ';;$' typo noise
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - fix a broken cast in nfs4_callback_recallany() - fix an Oops during NFSv4 migration events - make struct nlmclnt_fl_close_lock_ops static * tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: make struct nlmclnt_fl_close_lock_ops static nfs: system crashes after NFS4ERR_MOVED recovery NFSv4: Fix broken cast in nfs4_callback_recallany()
-
- 25 2月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - Add handling for a missing instruction in our 32-bit BPF JIT so that it can be used for seccomp filtering. - Add a missing NULL pointer check before a function call in new EEH code. - Fix an error path in the new ocxl driver to correctly return EFAULT. - The support for the new ibm,drc-info device tree property turns out to need several fixes, so for now we just stop advertising to firmware that we support it until the bugs can be ironed out. - One fix for the new drmem code which was incorrectly modifying the device tree in place. - Finally two fixes for the RFI flush support, so that firmware can advertise to us that it should be disabled entirely so as not to affect performance. Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord, Michael Bringmann. * tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Support firmware disable of RFI flush powerpc/pseries: Support firmware disable of RFI flush powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2 powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access powerpc/pseries: Revert support for ibm,drc-info devtree property powerpc/pseries: Fix duplicate firmware feature for DRC_INFO ocxl: Fix potential bad errno on irq allocation powerpc/eeh: Fix crashes in eeh_report_resume()
-
- 24 2月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
-