Add BR_FROZEN_REPLY in binder_return_strings to support stat function.

Fixes: ae28c1be ("binder: BINDER_GET_FROZEN_INFO ioctl")
Acked-by: NTodd Kjos <tkjos@google.com>
Signed-off-by: NHang Lu <hangl@codeaurora.org>
Link: https://lore.kernel.org/r/1617961246-4502-2-git-send-email-hangl@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v5.13

Detailed description for this pull request:

1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c

- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c

- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.

* tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: qcom-spmi: Add support for VBUS detection
  bindings: pm8941-misc: Add support for VBUS detection
  bindings: pm8941-misc: Convert bindings to YAML
  extcon: sm5502: Detect OTG when USB_ID is connected to ground
  extcon: max8997: Add CHGINS and CHGRM interrupt handling

Merge tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

Second set of FPGA Manager changes for 5.13-rc1

FPGA Manager:
- Russ' first change improves port_enable reliability
- Russ' second change adds a new device ID for a DFL device
- Geert's change updates the examples in binding with dt overlay sugar
  syntax

All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: NMoritz Fischer <mdf@kernel.org>

* tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: pci: add DID for D5005 PAC cards
  dt-bindings: fpga: fpga-region: Convert to sugar syntax
  fpga: dfl: afu: harden port enable logic
  fpga: Add support for Xilinx DFX AXI Shutdown manager
  dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager
  fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe()
  fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER

VBUS can be detected via a dedicated PMIC pin. Add support
for reporting the VBUS status.
Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: NKavya Nunna <knunna@codeaurora.org>
Signed-off-by: NGuru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Add interrupt support for reporting VBUS detection status that can be
detected via a dedicated PMIC pin.
Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: NGuru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Convert bindings from txt to YAML.
Signed-off-by: NGuru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

In it's curent state this driver ignores OTG adapters with ID pin
connected to ground. This commit adds a check to set extcon into
host mode when such OTG adapter is connected.
Signed-off-by: NNikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

This allows the MAX8997 charger to set the current limit depending on
the detected extcon charger type.
Signed-off-by: NTimon Baetz <timon.baetz@protonmail.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>

Adding CoreSight headers to the list of supported files so that maintainers
can be notified when changes are submitted.

Link: https://lore.kernel.org/r/20210326155431.2011889-1-mathieu.poirier@linaro.orgSigned-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210407160007.418053-5-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch warning:
WARNING: 'compoment' may be misspelled - perhaps 'component'?

Link: https://lore.kernel.org/r/1616487086-50418-1-git-send-email-liuqi115@huawei.comSigned-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-4-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The sparse tool complains as follows:

drivers/hwtracing/coresight/coresight-etm-perf.c:61:25: warning:
 symbol 'format_attr_contextid' was not declared. Should it be static?

This symbol is not used outside of coresight-etm-perf.c, so this
commit marks it static.

Link: https://lore.kernel.org/r/20210308123250.2417947-1-weiyongjun1@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-3-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add ETM PID for Cortex-A78 to the list of supported ETMs.

Link: https://lore.kernel.org/r/20210213112829.26834-1-saiprakash.ranjan@codeaurora.orgReviewed-by: NMike Leach <mike.leach@linaro.org>
Signed-off-by: NSai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-2-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.13

  - Updates:
	- Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and
	  bcm-ns-usb3 bindings
	- Mediatek dsi and hdmi phy updates
	- TI j721e-wiz updates for AM64
	- Cadence-torrent phy updates for SGMII/QSGMII

  - New support:
	- usb3-dp phy for Qualcomm SM8250
	- UTMI phy for Armada CP110
	- USB phy for Qualcomm SC7280
	- Binding and driver for Sparx5 ethernet serdes

* tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits)
  phy: fix resource_size.cocci warnings
  phy: Sparx5 Eth SerDes: Use direct register operations
  phy: hisilicon: Use the correct HiSilicon copyright
  phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON
  phy: qcom-qmp: add support for sm8250-usb3-dp phy
  phy: qcom-qmp: rename common registers
  phy: qcom-qmp: move DP functions to callbacks
  dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
  dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml
  phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII
  dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml
  phy: zynqmp: Handle the clock enable/disable properly
  dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
  dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
  phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5
  phy: cadence-torrent: Add delay for PIPE clock to be stable
  phy: cadence-torrent: Explicitly request exclusive reset control
  phy: cadence-torrent: Do not configure SERDES if it's already configured
  phy: cadence-torrent: Group reset APIs and clock APIs
  phy: ti: j721e-wiz: Do not configure wiz if its already configured
  ...

Merge tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.13-rc1

Updates for v5.13-rc1 are:

Core:
 - Ability to add quirks for masters
 - static checker cleanup for bus code

Drivers:
 - DMI quirks for Intel controllers
 - static checker cleanup for drivers
 - add auto enumeration support qcom controller

* tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits)
  soundwire: intel_init: test link->cdns
  soundwire: qcom: handle return correctly in qcom_swrm_transport_params
  soundwire: qcom: cleanup internal port config indexing
  soundwire: qcom: wait for fifo space to be available before read/write
  soundwire: qcom: add static port map support
  soundwire: qcom: update port map allocation bit mask
  soundwire: add static port mapping support
  soundwire: stream: fix memory leak in stream config error path
  soundwire: qcom: use signed variable for error return
  soundwire: qcom: wait for enumeration to be complete in probe
  soundwire: qcom: add auto enumeration support
  soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add
  soundwire: qcom: add support to new interrupts
  soundwire: qcom: update register read/write routine
  soundwire: qcom: start the clock during initialization
  soundwire: qcom: set continue execution flag for ignored commands
  soundwire: qcom: add support to missing transport params
  dt-bindings: soundwire: qcom: clarify data port bus parameters
  soundwire: cadence: only prepare attached devices on clock stop
  soundwire: generic_allocation: fix confusion between group and packing
  ...

drivers/phy/microchip/sparx5_serdes.c:2440:54-57: ERROR: Missing resource_size with iores

 Use resource_size function on resource object
 instead of explicit computation.

Generated by: scripts/coccinelle/api/resource_size.cocci

Fixes: 2ff8a1ee ("phy: Add Sparx5 ethernet serdes PHY driver")
CC: Steen Hegelund <steen.hegelund@microchip.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210318232844.GA65886@63b0c5462fdaSigned-off-by: NVinod Koul <vkoul@kernel.org>

Use direct register operations instead of a table of register
information to lower the stack usage.
Signed-off-by: NSteen Hegelund <steen.hegelund@microchip.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210329141309.612459-2-steen.hegelund@microchip.comSigned-off-by: NVinod Koul <vkoul@kernel.org>

s/Hisilicon/HiSilicon/g.
It should use capital S, according to the official website.
Signed-off-by: NHao Fang <fanghao11@huawei.com>
Link: https://lore.kernel.org/r/1617278537-26102-1-git-send-email-fanghao11@huawei.comSigned-off-by: NVinod Koul <vkoul@kernel.org>

When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi
suffers a build error due to a missing interface that is provided
by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON.

ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe':
phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-phy@lists.infradead.org
Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

intel_link_probe() could return error and dev_get_drvdata() will return
null in such case. So we have to test link->cdns after
link->cdns = dev_get_drvdata(&ldev->auxdev.dev);
Otherwise, we will meet the "kernel NULL pointer dereference" error.
Signed-off-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: NRander Wang <rander.wang@intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210406010101.11442-1-yung-chuan.liao@linux.intel.comSigned-off-by: NVinod Koul <vkoul@kernel.org>

Looks like return from reg_write is set but not checked.
Fix this by adding error return path.
Reported-by: Ncoverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1503591 ("UNUSED_VALUE")
Fixes: 128eaf93 ("soundwire: qcom: add support to missing transport params")
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210401091502.15825-1-srinivas.kandagatla@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

Internally used portconfig array for storing port bandwidth
params starts from offset zero. However port zero is not really
used and we also copy the bus parameters to offset zero.
So basically we endup with a code which has to subtract 1 from port
number to get to port parameters.

This is bit confusing to the reader so, make this bit more obvious by only
copying the parameters to offset 1 instead of zero. This will avoid doing
-1 every time when we try to get port params.

Similar thing has been recently done with din/dout_port_mask.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210401092454.21299-1-srinivas.kandagatla@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

If we write registers very fast we can endup in a situation where some
of the writes will be dropped without any notice.

So wait for the fifo space to be available before reading/writing the
soundwire registers.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210401090058.24041-1-srinivas.kandagatla@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

SoundWire device ports are statically mapped to Controller ports during
design. Add support to read these from SoundWire devices.
This controller uses static port map info to setup bandwidth
parameters for those ports.

A generic port allocation is not possible in this cases!
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315165650.13392-4-srinivas.kandagatla@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

currently the internal bitmask used for allocating ports starts with offset 0.
This is bit confusing as data port numbers on Qualcomm controller are valid
from 1 to 14. So adjust this bit mask accordingly, this will also help while
adding static port map support.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315165650.13392-3-srinivas.kandagatla@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

Some of the SoundWire device ports are statically mapped to Controller
ports during design, however there is no way to expose this information
to the controller. Controllers like Qualcomm ones use this info to setup
static bandwidth parameters for those ports.

A generic port allocation is not possible in this cases!
So this patch adds a new member m_port_map to struct sdw_slave to expose
this static map.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315165650.13392-2-srinivas.kandagatla@linaro.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

When stream config is failed, master runtime will release all
slave runtime in the slave_rt_list, but slave runtime is not
added to the list at this time. This patch frees slave runtime
in the config error path to fix the memory leak.

Fixes: 89e59053 ("soundwire: Add support for SoundWire stream management")
Signed-off-by: NRander Wang <rander.wang@intel.com>
Reviewed-by: NKeyon Jie <yang.jie@intel.com>
Reviewed-by: NGuennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.comSigned-off-by: NVinod Koul <vkoul@kernel.org>

This patch adds the approved PCI Express Device IDs for the
PF and VF for the card for D5005 PAC cards.
Signed-off-by: NRuss Weight <russell.h.weight@intel.com>
Signed-off-by: NMatthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: NMoritz Fischer <mdf@kernel.org>

This patch describes the sysfs interface implemented on the dw-xdata-pcie
driver.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/438c4ca9f6cc9e1cb29a65c0d2cca9a3d3f181b1.1617016509.git.gustavo.pimentel@synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Synopsys xData IP driver maintainer.

This driver aims to support Synopsys xData IP and is normally distributed
along with Synopsys PCIe EndPoint IP as a PCIe traffic generator (depends
of the use and licensing agreement).
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/c8fb9af0ba8c86c5cf8afbfc0eb07fc99a642270.1617016509.git.gustavo.pimentel@synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Documentation for dw-xdata-pcie driver.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/764b9bf744d7fe20c7a216019eef8ddf482c1bd7.1617016509.git.gustavo.pimentel@synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Synopsys DesignWare xData IP driver. This driver enables/disables
the PCI traffic generator module pertain to the Synopsys DesignWare
prototype.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/daa1efe23850e77d6807dc3f371728fc0b7548b8.1617016509.git.gustavo.pimentel@synopsys.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

KMSAN complains that vmci_check_host_caps() left the payload part of
check_msg uninitialized.

  =====================================================
  BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
  CPU: 1 PID: 1 Comm: swapper/0 Tainted: G    B             5.11.0-rc7+ #4
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
  Call Trace:
   dump_stack+0x21c/0x280
   kmsan_report+0xfb/0x1e0
   kmsan_internal_check_memory+0x202/0x520
   kmsan_check_memory+0xd/0x10
   iowrite8_rep+0x86/0x380
   vmci_guest_probe_device+0xf0b/0x1e70
   pci_device_probe+0xab3/0xe70
   really_probe+0xd16/0x24d0
   driver_probe_device+0x29d/0x3a0
   device_driver_attach+0x25a/0x490
   __driver_attach+0x78c/0x840
   bus_for_each_dev+0x210/0x340
   driver_attach+0x89/0xb0
   bus_add_driver+0x677/0xc40
   driver_register+0x485/0x8e0
   __pci_register_driver+0x1ff/0x350
   vmci_guest_init+0x3e/0x41
   vmci_drv_init+0x1d6/0x43f
   do_one_initcall+0x39c/0x9a0
   do_initcall_level+0x1d7/0x259
   do_initcalls+0x127/0x1cb
   do_basic_setup+0x33/0x36
   kernel_init_freeable+0x29a/0x3ed
   kernel_init+0x1f/0x840
   ret_from_fork+0x1f/0x30

  Uninit was created at:
   kmsan_internal_poison_shadow+0x5c/0xf0
   kmsan_slab_alloc+0x8d/0xe0
   kmem_cache_alloc+0x84f/0xe30
   vmci_guest_probe_device+0xd11/0x1e70
   pci_device_probe+0xab3/0xe70
   really_probe+0xd16/0x24d0
   driver_probe_device+0x29d/0x3a0
   device_driver_attach+0x25a/0x490
   __driver_attach+0x78c/0x840
   bus_for_each_dev+0x210/0x340
   driver_attach+0x89/0xb0
   bus_add_driver+0x677/0xc40
   driver_register+0x485/0x8e0
   __pci_register_driver+0x1ff/0x350
   vmci_guest_init+0x3e/0x41
   vmci_drv_init+0x1d6/0x43f
   do_one_initcall+0x39c/0x9a0
   do_initcall_level+0x1d7/0x259
   do_initcalls+0x127/0x1cb
   do_basic_setup+0x33/0x36
   kernel_init_freeable+0x29a/0x3ed
   kernel_init+0x1f/0x840
   ret_from_fork+0x1f/0x30

  Bytes 28-31 of 36 are uninitialized
  Memory access of size 36 starts at ffff8881675e5f00
  =====================================================

Fixes: 1f166439 ("VMCI: guest side driver implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-2-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.

  =====================================================
  BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
  CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
  Call Trace:
   dump_stack+0x21c/0x280
   kmsan_report+0xfb/0x1e0
   kmsan_internal_check_memory+0x484/0x520
   kmsan_check_memory+0xd/0x10
   iowrite8_rep+0x86/0x380
   vmci_send_datagram+0x150/0x280
   vmci_dbell_register_notification_bitmap+0x133/0x1e0
   vmci_guest_probe_device+0xcab/0x1e70
   pci_device_probe+0xab3/0xe70
   really_probe+0xd16/0x24d0
   driver_probe_device+0x29d/0x3a0
   device_driver_attach+0x25a/0x490
   __driver_attach+0x78c/0x840
   bus_for_each_dev+0x210/0x340
   driver_attach+0x89/0xb0
   bus_add_driver+0x677/0xc40
   driver_register+0x485/0x8e0
   __pci_register_driver+0x1ff/0x350
   vmci_guest_init+0x3e/0x41
   vmci_drv_init+0x1d6/0x43f
   do_one_initcall+0x39c/0x9a0
   do_initcall_level+0x1d7/0x259
   do_initcalls+0x127/0x1cb
   do_basic_setup+0x33/0x36
   kernel_init_freeable+0x29a/0x3ed
   kernel_init+0x1f/0x840
   ret_from_fork+0x1f/0x30

  Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
   vmci_dbell_register_notification_bitmap+0x50/0x1e0
   vmci_dbell_register_notification_bitmap+0x50/0x1e0

  Bytes 28-31 of 32 are uninitialized
  Memory access of size 32 starts at ffff88810098f570
  =====================================================

Fixes: 83e2ec76 ("VMCI: doorbell implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-1-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the char/misc fixes in here as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

 1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added to
    doubly linked list.
 2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added to
    doubly linked list.
 3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
 4. Close the first nosy device and nosy_release will be called. In
    nosy_release, client A will be unlinked and freed.
 5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.

Fix this bug by adding a check before inserting a client.  If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

   BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
   Write of size 8 at addr ffff888102ad7360 by task poc
   CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   Call Trace:
     nosy_release+0x1ea/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Allocated by task 337:
     nosy_open+0x154/0x4d0
     misc_open+0x2ec/0x410
     chrdev_open+0x20d/0x5a0
     do_dentry_open+0x40f/0xe80
     path_openat+0x1cf9/0x37b0
     do_filp_open+0x16d/0x390
     do_sys_openat2+0x11d/0x360
     __x64_sys_open+0xfd/0x1a0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Freed by task 337:
     kfree+0x8f/0x210
     nosy_release+0x158/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
   The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)

[ Modified to use 'list_empty()' inside proper lock  - Linus ]

Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/Reported-and-tested-by: N马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: NZheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull OpenRISC fix from Stafford Horne:
 "Fix duplicate header include in Litex SOC driver"

* tag 'for-linus' of git://github.com/openrisc/linux:
  soc: litex: Remove duplicated header file inclusion

POull io_uring fix from Jens Axboe:
 "Just fixing a silly braino in a previous patch, where we'd end up
  failing to compile if CONFIG_BLOCK isn't enabled.

  Not that a lot of people do that, but kernel bot spotted it and it's
  probably prudent to just flush this out now before -rc6.

  Sorry about that, none of my test compile configs have !CONFIG_BLOCK"

* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
  io_uring: fix !CONFIG_BLOCK compilation failure

The header file <linux/errno.h> is already included above and can be
removed here.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NMateusz Holenko <mholenko@antmicro.com>
Signed-off-by: NStafford Horne <shorne@gmail.com>

Pull gfs2 fixes from Andreas Gruenbacher:
 "Two more gfs2 fixes"

* tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: report "already frozen/thawed" errors
  gfs2: Flag a withdraw if init_threads() fails