On Sun, Jan 28, 2007 at 11:08:18AM +0100, Jiri Slaby wrote:
> Andrew Morton napsal(a):
> >Temporarily at
> >
> >	http://userweb.kernel.org/~akpm/2.6.20-rc6-mm1/
>
> Unable to select IPV6. Menuconfig doesn't offer it when INET is selected.
> When it's not it appears in the menu, but after state change it gets away.
> The same behaviour in xconfig, gconfig.
>
> $ mkdir ../a/tst
> $ make O=../a/tst menuconfig
>   HOSTCC  scripts/basic/fixdep
> [...]
>   HOSTLD  scripts/kconfig/mconf
> scripts/kconfig/mconf arch/i386/Kconfig
> Warning! Found recursive dependency: INET GFS2_FS_LOCKING_DLM SYSFS
> OCFS2_FS INET
>
> Maybe this is the problem?

Yes, patch below.

> regards,

cu
Adrian

<--  snip  -->

This patch fixes a circular dependency by letting GFS2_FS_LOCKING_DLM
and DLM depend on instead of select SYSFS.

Since SYSFS depends on EMBEDDED this change shouldn't cause any problems
for users.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

With CONFIG_DLM=m, CONFIG_PROC_FS=n, and CONFIG_SYSFS=n, kernel build
fails with:

WARNING: "kernel_subsys" [fs/gfs2/locking/dlm/lock_dlm.ko] undefined!
WARNING: "kernel_subsys" [fs/dlm/dlm.ko] undefined!
WARNING: "kernel_subsys" [fs/configfs/configfs.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Since fs/dlm/lockspace.c and fs/gfs2/locking/dlm/sysfs.c use
kernel_subsys, they should either DEPEND on it or SELECT it.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We want to be able to change or disable the default drop_count (number at
which the dlm asks gfs to limit the the number of locks it's holding).
Add it to the collection of sysfs tunables for an fs.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Increase the number of locks at which point the dlm begins asking gfs to
reduce its lock usage.  The default value is largely arbitrary, but the
current value of 50,000 ends up limiting performance unnecessarily for too
many users.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The patch below appears to fix the list corruption that we are seeing on
occasion. Although the transaction structure is private to a single
thread, when the queued structures are dismantled during an in-core
commit, its possible for a different thread to be trying to add the same
structure to another, new, transaction at the same time.

To avoid this, this patch takes the log spinlock during this operation.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

In certain cases, its possible for NFS to call the lookup code while
holding the glock (when doing a readdirplus operation) so we need to
check for that and not try and lock the glock twice. This also fixes a
typo in a previous NFS related GFS2 patch.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

A long, complicated sequence of events, beginning with the RESEND flag not
being cleared on an lkb, can result in an unlock never completing.

- lkb on waiters list for remote lookup
- the remote node is both the dir node and the master node, so
  it optimizes the lookup into a request and sends a request
  reply back
- the request reply is saved on the requestqueue to be processed
  after recovery
- recovery runs dlm_recover_waiters_pre() which sets RESEND flag
  so the lookup will be resent after recovery
- end of recovery: process_requestqueue takes saved request reply
  which removes the lkb off the waitesr list, _without_ clearing
  the RESEND flag
- end of recovery: dlm_recover_waiters_post() doesn't do anything
  with the now completed lookup lkb (would usually clear RESEND)
- later, the node unmounts, unlocks this lkb that still has RESEND
  flag set
- the lkb is on the waiters list again, now for unlock, when recovery
  occurs, dlm_recover_waiters_pre() shows the lkb for unlock with RESEND
  set, doesn't do anything since the master still exists
- end of recovery: dlm_recover_waiters_post() takes this lkb off
  the waiters list because it has the RESEND flag set, then reports
  an error because unlocks are never supposed to be handled in
  recover_waiters_post().
- later, the unlock reply is received, doesn't find the lkb on
  the waiters list because recover_waiters_post() has wrongly
  removed it.
- the unlock operation has been lost, and we're left with a
  stray granted lock
- unmount spins waiting for the unlock to complete

The visible evidence of this problem will be a node where gfs umount is
spinning, the dlm waiters list will be empty, and the dlm locks list will
show a granted lock.

The fix is simply to clear the RESEND flag when taking an lkb off the
waiters list.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

dlm_receive_message() returns 0 instead of returning 'error'.  What would
happen is that process_requestqueue would take a saved message off the
requestqueue and call receive_message on it.  receive_message would then
see that recovery had been aborted, set error to EINTR, and 'goto out',
expecting that the error would be returned.  Instead, 0 was always
returned, so process_requestqueue would think that the message had been
processed and delete it instead of saving it to process next time.  This
means the message (usually an unlock in my tests) would be lost.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Now that there can be multiple dlm_recv threads running we need to prevent two
recvs running for the same connection - it's unlikely but it can happen and it
causes message corruption.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is a one letter typo fix in glock.c, spotted by Rob Kenna.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

I was looking something else up and came across this...

I don't honestly have a good reason to change it other than to make it
like every other Linux filesystem in this regard.  ;-)  It doesn't
functionally change anything, but makes some lines shorter. :)

I'm also curious; why does gfs2 have 64-bits of on-disk timestamps, but
not in timespec_t format, and only stores second resolutions?  Seems like
you're halfway to sub-second resolutions already.

I suppose if that gets implemented then all of the below should
instead be CURRENT_TIME not CURRENT_TIME_SEC.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This one liner got missed from the previous patch.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This function is not longer required since we do not do recursive
locking in the glock layer. As a result all its callers can be
replaceed with list_empty() calls.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes a bug whereby data on a newly accepted connection would be
ignored if it arrived soon after the accept.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch doesn't make any changes to the ordering of the various
operations related to glocking, but it does tidy up the calls to the
glops.c functions to make the structure more obvious.

The two functions: gfs2_glock_xmote_th() and gfs2_glock_drop_th() can be
made static within glock.c since they are called by every set of glock
operations. The xmote_th and drop_th glock operations are then made
conditional upon those two routines existing and called from the
previously mentioned functions in glock.c respectively.

Also it can be seen that the go_sync operation isn't needed since it can
easily be replaced by calls to xmote_bh and drop_bh respectively. This
results in no longer (confusingly) calling back into routines in glock.c
from glops.c and also reducing the glock operations by one member.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch removes some redundant fields from the connection structure and adds
some lockdep annotation to remove spurious warnings.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Here is a patch for GFS2 to remove the local exclusive flag. In
the places it was used, mutex's are always held earlier in the
call path, so it appears redundant in the LM_ST_SHARED case.

Also, the GFS2 holders were setting local exclusive in any case where
the requested lock was LM_ST_EXCLUSIVE. So the other places in the glock
code where the flag was tested have been replaced with tests for the
lock state being LM_ST_EXCLUSIVE in order to ensure the logic is the
same as before (i.e. LM_ST_EXCLUSIVE is always locally exclusive as well
as globally exclusive).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is never used, so we might as well remove it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The "greedy" code was an attempt to retain glocks for a minimum length
of time when they relate to mmap()ed files. The current implementation
of this feature is not, however, ideal in that it required allocating
memory in order to do this and its overly complicated.

It also misses the mark by ignoring the other I/O operations which are
just as likely to suffer from the same problem. So the plan is to remove
this now and then add the functionality back as part of the glock state
machine at a later date (and thus take into account all the possible
users of this feature)
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Here is something I spotted (while looking for something entirely
different) the other day.

Rather than using a completion in each and every struct gfs2_holder,
this removes it in favour of hashed wait queues, thus saving a
considerable amount of memory both on the stack (where a number of
gfs2_holder structures are allocated) and in particular in the
gfs2_inode which has 8 gfs2_holder structures embedded within it.

As a result on x86_64 the gfs2_inode shrinks from 2488 bytes to
1912 bytes, a saving of 576 bytes per inode (no thats not a typo!).
In actual practice we get a much better result than that since
now that a gfs2_inode is under the 2048 byte barrier, we get two
per 4k slab page effectively halving the amount of memory required
to store gfs2_inodes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This removes an unused sysfs tunable parameter.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This removes the extra filldir callback which gfs2 was using to
enclose an attempt at readahead for inodes during readdir. The
code was too complicated and also hurts performance badly in the
case that the getdents64/readdir call isn't being followed by
stat() and it wasn't even getting it right all the time when it
was.

As a result, on my test box an "ls" of a directory containing 250000
files fell from about 7mins (freshly mounted, so nothing cached) to
between about 15 to 25 seconds. When the directory content was cached,
the time taken fell from about 3mins to about 4 or 5 seconds.

Interestingly in the cached case, running "ls -l" once reduced the time
taken for subsequent runs of "ls" to about 6 secs even without this
patch. Now it turns out that there was a special case of glocks being
used for prefetching the metadata, but because of the timeouts for these
locks (set to 10 secs) the metadata was being timed out before it was
being used and this the prefetch code was constantly trying to prefetch
the same data over and over.

Calling "ls -l" meant that the inodes were brought into memory and once
the inodes are cached, the glocks are not disposed of until the inodes
are pushed out of the cache, thus extending the lifetime of the glocks,
and thus bringing down the time for subsequent runs of "ls"
considerably.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

It occurred to me that although a gfs2 specific writepages for ordered
writes and journaled data would be tricky, by hooking writepages only
for "data=writeback" mounts we could take advantage of not needing
buffer heads (we don't use them on the read side, nor have we for some
time) and create much larger I/Os for the block layer.

Using blktrace both before and after, its possible to see that for large
I/Os, most of the requests generated through writepages are now 1024
sectors after this patch is applied as opposed to 8 sectors before.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

If master recovery happens on an rsb in one recovery sequence, then that
sequence is aborted before lock recovery happens, then in the next
sequence, we rely on the previous master recovery (which may now be
invalid due to another node ignoring a lookup result) and go on do to the
lock recovery where we get stuck due to an invalid master value.

 recovery cycle begins: master of rsb X has left
 nodes A and B send node C an rcom lookup for X to find the new master
 C gets lookup from B first, sets B as new master, and sends reply back to B
 C gets lookup from A next, and sends reply back to A saying B is master
 A gets lookup reply from C and sets B as the new master in the rsb
 recovery cycle on A, B and C is aborted to start a new recovery
 B gets lookup reply from C and ignores it since there's a new recovery
 recovery cycle begins: some other node has joined
 B doesn't think it's the master of X so it doesn't rebuild it in the directory
 C looks up the master of X, no one is master, so it becomes new master
 B looks up the master of X, finds it's C
 A believes that B is the master of X, so it sends its lock to B
 B sends an error back to A
 A resends
 this repeats forever, the incorrect master value on A is never corrected

The fix is to do master recovery on an rsb that still has the NEW_MASTER
flag set from an earlier recovery sequence, and therefore didn't complete
lock recovery.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When a user process exits, we clear all the locks it holds.  There is a
problem, though, with locks that the process had begun unlocking before it
exited.  We couldn't find the lkb's that were in the process of being
unlocked remotely, to flag that they are DEAD.  To solve this, we move
lkb's being unlocked onto a new list in the per-process structure that
tracks what locks the process is holding.  We can then go through this
list to flag the necessary lkb's when clearing locks for a process when it
exits.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch converts the DLM TCP lowcomms to use workqueues rather than using its
own daemon functions. Simultaneously removing a lot of code and making it more
scalable on multi-processor machines.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

On Thu, Jan 11, 2007 at 10:26:27PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc3-mm1:
>...
>  git-gfs2-nmw.patch
>...
>  git trees
>...

This patch makes the needlessly globlal gfs2_change_nlink_i() static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is for Red Hat bugzilla bug bz #222302:

Moving a virtual IP from node to node between two NFS-over-GFS2
servers was causing one of the GFS2 servers to become confused and
reference a deleted inode.  The problem was due to vfs dentries that did
not reference the gfs2_dops and therefore didn't call the gfs2 revalidate
code to revalidate a dentry after a directory had been deleted & recreated.
This patch is a crosswrite from a RHEL4 bug found in GFS1 as
bz #190756 and it is against the latest -nmw git tree.
Signed-off-by: NRobert Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Make the dlm_config_info values readable and writeable via configfs
entries.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Add a new dlm_config_info field to enable log_debug output and change
log_debug() to use it.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch).  No functional changes in this patch, just naming changes.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Some common, non-error messages should use log_debug instead of log_error
so they can be turned off.
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Second round of gfs2_rename lock re-ordering to allow Anaconda adding
root partition on top of gfs2. Previous to this patch the recursive
lock detector in glock.c can be triggered due to attempting to lock
the rgrp twice. This fixes it by checking to see whether the rgrp
is already locked.

This fixes Red Hat bugzilla #221237
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Update the quilt header comments to match the
code changes.

Change gfs2_lookup_simple to return an error in the case
of a NULL inode.
The callers of gfs2_lookup_simple do not check for NULL
in the no entry case and such would end up dereferencing a NULL ptr.

This fixes:
http://projects.info-pull.com/mokb/MOKB-15-11-2006.htmlSigned-off-by: NRussell Cattelan <cattelan@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

In case of unlinked files with dirty pages GFS2 wasn't clearing
the pages in quite the right order. This patch clears the pages
earlier (before the qlock_dq) to avoid the situation that the
release of the glock results in attempting to write back data that
has already been deallocated.

This fixes Red Hat bugzilla: #220117
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

I just noticed this message when testing some other changes I'd made to
lowcomms (to use workqueues) but the problem seems to be in the current
git trees too. I'm amazed no-one has seen it.

    BUG: spinlock already unlocked on CPU#1, dlm_recoverd/16868
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

I was a little over-enthusiastic turning schedule() calls int cond_sched() when fixing the DLM for Andrew Morton.

These four should really be calls to schedule() or the dlm can busy-wait.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Bugzilla 215088

Fix deadlock in gfs2_change_nlink() while installing RHEL5 into GFS2
partition. The gfs2_rename() apparently needs block allocation for the
new name (into the directory) where it requires rg locks. At the same
time, while updating the nlink count for the replaced file,
gfs2_change_nlink() tries to return the inode meta-data back to resource
group where it needs rg locks too. Our logic doesn't allow process to
acquire these locks recursively by the same process  (RHEL installer)
that results a BUG call. This only happens within rename code path and
only if the destination file exists before the rename operation.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is partially derrived from a patch written by Russell Cattelan.
It fixes a bug where there is a race between readpages and truncate
by ignoring readpages for stuffed files. This is ok because a stuffed
file will never be more than one block (minus sizeof(struct gfs2_dinode))
in size and block size is always less than page size, so we do not lose
anything efficiency-wise by not doing readahead for stuffed files. They
will have already been "read ahead" by the action of reading the inode
in, in the first place.

This is the remaining part of the fix for Red Hat bugzilla #218966
which had not yet made it upstream.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Russell Cattelan <cattelan@redhat.com>

This patch fixes Red Hat bugzilla #212627 in which a deadlock occurs
due to trying to take the i_mutex while holding a glock. The correct
locking order is defined as i_mutex -> glock in all cases.

I've left dealing with allocating writes. I know that we need to do
that, but for now this should do the trick. We don't need to take the
i_mutex on write, because the VFS has already taken it for us. On read
we don't need it since the glock is enough protection. The reason that
I've made some of the checks into a separate function is that we'll need
to do the checks again in the allocating write case eventually, so this
is partly in preparation for this. Likewise the return value test of !=
1 might look a bit odd and thats because we'll need a third return value
in case of requiring an allocation.

I've made the change to deferred mode on the glock to ensure flushing
read caches on other nodes. I notice that (using blktrace to look at
whats going on) we appear to do a better job of large I/Os than ext3
after this patch (in terms of not splitting up the I/Os).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>