Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync
needed.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The 32-bit version and 64-bit version are almost equal.  Unify them.  This
makes further improvements (for example, copying with parallel, supporting
PREFETCH, etc.) easier.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is a fix for a typo repeated several times in #error directives for
invalid SiByte configurations.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For the definition of atomic64_t atomic.h was relying on <asm/types.h>
having been included previously.  Before changeset
d89d8e0637a5e4e0a12e90c4bc934d0d4c335239 this was happening as a
side effect of including <linux/spinlock.h>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

N32 SysV IPC system calls should use 32-bit compatible code.
arch/mips/kernel/linux32.c have similar compatible code for O32, but
ipc/compat.c seems more complete.  We can use it for both N32 and O32.

This patch should fix these problems (and other possible problems):

http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop
http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.comSigned-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits)
  [PATCH] pata_ali: small fixes
  [PATCH] pata_via: VIA 8251 bridged systems are now out and about
  [PATCH] trivial piix: swap bogus dot for comma space
  [PATCH] sata_promise: PHYMODE4 fixup
  [PATCH] libata: always use polling IDENTIFY
  [libata] pata_cs5535: fix build
  [PATCH] ahci: do not powerdown during initialization
  [PATCH] libata: prepare ata_sg_clean() for invocation from EH
  [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf()
  [PATCH] libata: implement ata_exec_internal_sg()
  [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  [PATCH] libata: move BMDMA host status recording from EH to interrupt handler
  [PATCH] libata: make sure sdev doesn't go away while rescanning
  [PATCH] libata: don't request sense if the port is frozen
  [PATCH] libata: fix READ CAPACITY simulation
  [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2
  [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs
  [PATCH] libata: remove unused HSM_ST_UNKNOWN
  [PATCH] libata: kill unnecessary sht->max_sectors initializations
  [PATCH] libata: add missing sht->slave_destroy
  ...

Switch to pci_get_bus_and_slot because some x86 systems seem to be
handing us a device with dev->bus = NULL. Also don't apply the isa fixup
to revision C6 and later of the chip.

Really we need to work out wtf is handing us pdev->bus = NULL, but firstly
and more importantly we need the drivers working.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

OK, that seems to be enough to deal with the mess.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This was exposed by Al's recent header file dependency reduction
patches..

Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus4' of master.kernel.org:/pub/scm/linux/kernel/git/viro/bird:
  [PATCH] severing poll.h -> mm.h
  [PATCH] severing skbuff.h -> mm.h
  [PATCH] severing skbuff.h -> poll.h
  [PATCH] severing skbuff.h -> highmem.h
  [PATCH] severing uaccess.h -> sched.h
  [PATCH] severing fs.h, radix-tree.h -> sched.h
  [PATCH] severing module.h->sched.h

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [SUNHME]: Fix for sunhme failures on x86
  [XFRM] xfrm_user: Better validation of user templates.
  [DCCP] tfrc: Binary search for reverse TFRC lookup
  [DCCP] ccid3: Deprecate TFRC_SMALLEST_P
  [DCCP] tfrc: Identify TFRC table limits and simplify code
  [DCCP] tfrc: Add protection against invalid parameters to TFRC routines
  [DCCP] tfrc: Fix small error in reverse lookup of p for given f(p)
  [DCCP] tfrc: Document boundaries and limits of the TFRC lookup table
  [DCCP] ccid3: Fix warning message about illegal ACK
  [DCCP] ccid3: Fix bug in calculation of send rate
  [DCCP]: Fix BUG in retransmission delay calculation
  [DCCP]: Use higher RTO default for CCID3

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (34 commits)
  [S390] Don't use small stacks when lockdep is used.
  [S390] cio: Use device_reprobe() instead of bus_rescan_devices().
  [S390] cio: Retry internal operations after vary off.
  [S390] cio: Use path verification for last path gone after vary off.
  [S390] non-unique constant/macro identifiers.
  [S390] Memory detection fixes.
  [S390] cio: Make ccw_dev_id_is_equal() more robust.
  [S390] Convert extmem spin_lock into a mutex.
  [S390] set KBUILD_IMAGE.
  [S390] lockdep: show held locks when showing a stackdump
  [S390] Add dynamic size check for usercopy functions.
  [S390] Use diag260 for memory size detection.
  [S390] pfault code cleanup.
  [S390] Cleanup memory_chunk array usage.
  [S390] Misaligned wait PSW at memory detection.
  [S390] cpu shutdown rework
  [S390] cpcmd <-> __cpcmd calling issues
  [S390] Bad kexec control page allocation.
  [S390] Reset infrastructure for re-IPL.
  [S390] Some documentation typos.
  ...

This patch adds missing bracket.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the m68knommu DMA handling consistent with other architectures.
Compile problems pointed out by Adrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove use of __rom_end symbol all together. This helps clean out the
miscellaneous symbols lying around in the m68knommu linker script.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here is a small patch to automatically detect the DRAM size on m520x.
It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board.

(This part of the patch if the memory register defines for the 520x
ColdFire CPU family - Greg).
Signed-off-by: NMichael Broughton <mbobowik@telusplanet.net>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here is a small patch to automatically detect the DRAM size on m520x.
It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board.
Signed-off-by: NMichael Broughton <mbobowik@telusplanet.net>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It turns out SHMAT, SHMDT, SHMGET and SHMCTL support in sys_ipc() for
m68knommu in 2.6 kernel(uClinux-dist-20060803 release) is missing.
(copied from m68k sources, report by David Wu <davidwu@arcturusnetworks.com>)
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Specify printk level in m68knommu stack dump code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Specify printk level in m68knommu oops dump code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes the following compile error with
CONFIG_BLK_DEV_INITRD=n and -Werror-implicit-function-declaration:

  ...
    CC      arch/m68knommu/kernel/setup.o
  /home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/arch/m68knommu/kernel/setup.c: In function 'setup_arch':
  /home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/arch/m68knommu/kernel/setup.c:268: error: implicit declaration of function 'paging_init'
  make[2]: *** [arch/m68knommu/kernel/setup.o] Error 1
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Formatting and a spelling cleanup in m68knommu Kconfig.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The lock dependency validator adds a bunch of extra stack frames to
the stack, which can cause stack overflows. Especially seen on 31 bit
where the small stack is only 4k.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In io_subchannel_register(), it is better to just reprobe the current
device if it hasn't a driver yet than to rescan the whole bus.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If I/O was running on a just varied off chpid, it will be terminated.
If this was a common I/O layer internal I/O, it needs to be retried.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If the last path to a device is gone after a chpid has been varied
off, putting it on the slow queue doesn't prevent a device driver
from still attempting to use it (it may stay on the slow queue for a
long time). Instead, trigger a verify event which will prevent I/O
attempts from the device driver immediately.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add some prefixes to constands defined in drivers/s390/net/qdio.h
and drivers/s390/lcs.h to make it possible to include the three
header files drivers/s390/net/qeth.h, drivers/s390/net/qdio.h and
drivers/net/s390/lcs.h in one C file. This is required for the
patch that generates the kerntypes.o file for use by lcrash.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

VMALLOC_END on 31bit should be 0x8000000UL instead of 0x7fffffffL.
The page mask which is used to make sure memory_end is on 4MB/2MB
boundary is wrong and not needed. Therefore remove it.
Make sure a vmalloc area does also exist and work on (future)
machines with 4TB and more memory.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Using memcmp to compare ccw_dev_id implies that the whole structure (incl.
padding) has always been completely initialized to sane values. Comparing
the structures field by field doesn't make such assumptions.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There's no need to have a spin_lock here, but need sleepable context
for vmem_map. Therefore convert the spin_lock into a mutex.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Set KBUILD_IMAGE to a sane value. This enables "make rpm"
Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Follow i386/x86_64:
lockdep can be used to print held locks when printing a
backtrace. This can be useful when debugging things like
'scheduling while atomic' asserts.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use a wrapper for copy_to/from_user to chose the best usercopy method.
The mvcos instruction is better for sizes greater than 256 bytes, if
mvcos is not available a page table walk is better for sizes greater
than 1024 bytes. Also removed the redundant copy_to/from_user_std_small
functions.
Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Avoid the tprot loop if diag260 works and reports that there are no
holes in memory. The tprot instruction can lead to a significant delay
in the ipl process if the virtual guest has a lot of memory and the
host is under memory pressure.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>