ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio

A test with the command below gives for example this error:

arch/arm/boot/dts/rk3288-tinker.dt.yaml: tsadc: otp-gpio:
{'phandle': [[54]], 'rockchip,pins': [[0, 10, 0, 118]]}
is not of type 'array'

'gpio' is a sort of reserved nodename and should not be used
for pinctrl in combination with 'rockchip,pins', so change
nodes that end with 'gpio' to end with 'pin' or 'pins'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/
dtschema/schemas/gpio/gpio.yaml
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200524160636.16547-1-jbx6244@gmail.comSigned-off-by: NHeiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk322x.dtsi

@@ -520,9 +520,9 @@
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <0>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -1111,7 +1111,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 

arch/arm/boot/dts/rk3288-veyron-jaq.dts

@@ -47,7 +47,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 

arch/arm/boot/dts/rk3288-veyron-jerry.dts

@@ -192,7 +192,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 

arch/arm/boot/dts/rk3288-veyron-mighty.dts

@@ -18,8 +18,8 @@
 };
 
 &sdmmc {
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
-			&sdmmc_wp_gpio &sdmmc_bus4>;
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_wp_pin &sdmmc_bus4>;
 	wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
 
 	/delete-property/ disable-wp;
@@ -27,7 +27,7 @@
 
 &pinctrl {
 	sdmmc {
-		sdmmc_wp_gpio: sdmmc-wp-gpio {
+		sdmmc_wp_pin: sdmmc-wp-pin {
 			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};

arch/arm/boot/dts/rk3288-veyron-minnie.dts

@@ -114,7 +114,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 

arch/arm/boot/dts/rk3288-veyron-pinky.dts

@@ -105,7 +105,7 @@
 	};
 
 	sdmmc {
-		sdmmc_wp_gpio: sdmmc-wp-gpio {
+		sdmmc_wp_pin: sdmmc-wp-pin {
 			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
@@ -126,8 +126,8 @@
 
 &sdmmc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
-		     &sdmmc_wp_gpio &sdmmc_bus4>;
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+		     &sdmmc_wp_pin &sdmmc_bus4>;
 	wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
 };
 

arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi

@@ -41,7 +41,7 @@
 		};
 
 		/* This is where we actually hook up CD */
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm/boot/dts/rk3288-veyron-speedy.dts

@@ -54,7 +54,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 

arch/arm/boot/dts/rk3288.dtsi

@@ -574,9 +574,9 @@
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
@@ -1929,7 +1929,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 

arch/arm/boot/dts/rv1108.dtsi

@@ -351,9 +351,9 @@
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
 		clock-names = "tsadc", "apb_pclk";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		rockchip,hw-tshut-temp = <120000>;
@@ -728,7 +728,7 @@
 						<0 RK_PC6 3 &pcfg_pull_none>;
 			};
 
-			i2c2m1_gpio: i2c2m1-gpio {
+			i2c2m1_pins: i2c2m1-pins {
 				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
 						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
@@ -740,7 +740,7 @@
 						<1 RK_PD4 2 &pcfg_pull_none>;
 			};
 
-			i2c2m05v_gpio: i2c2m05v-gpio {
+			i2c2m05v_pins: i2c2m05v-pins {
 				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
 						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
@@ -867,7 +867,7 @@
 				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
 			};
 
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
@@ -886,7 +886,7 @@
 				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
 			};
 
-			uart0_rts_gpio: uart0-rts-gpio {
+			uart0_rts_pin: uart0-rts-pin {
 				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};