提交 fff7a434 编写于 作者: W Wey-Yi Guy 提交者: John W. Linville

iwlwifi: use #define instead of hard coded value

Instead of hard coded value, use the define in iwl-commands.h for
better code maintenance
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 43121432
...@@ -960,10 +960,10 @@ void iwl_set_rxon_chain(struct iwl_priv *priv) ...@@ -960,10 +960,10 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
if (iwl_is_monitor_mode(priv) && if (iwl_is_monitor_mode(priv) &&
!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) && !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) { ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS; rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS;
rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS; rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS;
rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS; rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
} }
priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
......
...@@ -580,9 +580,10 @@ static void iwl_bg_request_scan(struct work_struct *data) ...@@ -580,9 +580,10 @@ static void iwl_bg_request_scan(struct work_struct *data)
int ret = 0; int ret = 0;
u32 rate_flags = 0; u32 rate_flags = 0;
u16 cmd_len; u16 cmd_len;
u16 rx_chain = 0;
enum ieee80211_band band; enum ieee80211_band band;
u8 n_probes = 0; u8 n_probes = 0;
u8 rx_chain = priv->hw_params.valid_rx_ant; u8 rx_ant = priv->hw_params.valid_rx_ant;
u8 rate; u8 rate;
bool is_active = false; bool is_active = false;
...@@ -723,7 +724,7 @@ static void iwl_bg_request_scan(struct work_struct *data) ...@@ -723,7 +724,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
* Avoid A (0x1) because of its off-channel reception on A-band. * Avoid A (0x1) because of its off-channel reception on A-band.
*/ */
if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
rx_chain = 0x6; rx_ant = ANT_BC;
} else { } else {
IWL_WARN(priv, "Invalid scan band count\n"); IWL_WARN(priv, "Invalid scan band count\n");
goto done; goto done;
...@@ -735,10 +736,11 @@ static void iwl_bg_request_scan(struct work_struct *data) ...@@ -735,10 +736,11 @@ static void iwl_bg_request_scan(struct work_struct *data)
scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags); scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
/* MIMO is not used here, but value is required */ /* MIMO is not used here, but value is required */
scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS;
cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
(rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) | rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
(0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
scan->rx_chain = cpu_to_le16(rx_chain);
cmd_len = iwl_fill_probe_req(priv, cmd_len = iwl_fill_probe_req(priv,
(struct ieee80211_mgmt *)scan->data, (struct ieee80211_mgmt *)scan->data,
priv->scan_request->ie, priv->scan_request->ie,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册