net/mlx5: Add devlink interface

The devlink interface is initially used to set/get the mode of the SRIOV e-switch.

Currently, these are only stubs for get/set, down-stream patch will actually
fill them out.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/Kconfig

@@ -4,6 +4,7 @@
 
 config MLX5_CORE
 	tristate "Mellanox Technologies ConnectX-4 and Connect-IB core driver"
+	depends on MAY_USE_DEVLINK
 	depends on PCI
 	default n
 	---help---

drivers/net/ethernet/mellanox/mlx5/core/eswitch.h

@@ -35,6 +35,7 @@
 
 #include <linux/if_ether.h>
 #include <linux/if_link.h>
+#include <net/devlink.h>
 #include <linux/mlx5/device.h>
 
 #define MLX5_MAX_UC_PER_VPORT(dev) \
@@ -205,6 +206,9 @@ mlx5_eswitch_add_send_to_vport_rule(struct mlx5_eswitch *esw, int vport, u32 sqn
 struct mlx5_flow_rule *
 mlx5_eswitch_create_vport_rx_rule(struct mlx5_eswitch *esw, int vport, u32 tirn);
 
+int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode);
+int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode);
+
 #define MLX5_DEBUG_ESWITCH_MASK BIT(3)
 
 #define esw_info(dev, format, ...)				\

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c

@@ -328,3 +328,13 @@ mlx5_eswitch_create_vport_rx_rule(struct mlx5_eswitch *esw, int vport, u32 tirn)
 	kfree(match_c);
 	return flow_rule;
 }
+
+int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode)
+{
+	return -EOPNOTSUPP;
+}
+
+int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
+{
+	return -EOPNOTSUPP;
+}

drivers/net/ethernet/mellanox/mlx5/core/main.c

@@ -51,6 +51,7 @@
 #ifdef CONFIG_RFS_ACCEL
 #include <linux/cpu_rmap.h>
 #endif
+#include <net/devlink.h>
 #include "mlx5_core.h"
 #include "fs_core.h"
 #ifdef CONFIG_MLX5_CORE_EN
@@ -1315,19 +1316,28 @@ struct mlx5_core_event_handler {
 		      void *data);
 };
 
+static const struct devlink_ops mlx5_devlink_ops = {
+#ifdef CONFIG_MLX5_CORE_EN
+	.eswitch_mode_set = mlx5_devlink_eswitch_mode_set,
+	.eswitch_mode_get = mlx5_devlink_eswitch_mode_get,
+#endif
+};
 
 static int init_one(struct pci_dev *pdev,
 		    const struct pci_device_id *id)
 {
 	struct mlx5_core_dev *dev;
+	struct devlink *devlink;
 	struct mlx5_priv *priv;
 	int err;
 
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev) {
+	devlink = devlink_alloc(&mlx5_devlink_ops, sizeof(*dev));
+	if (!devlink) {
 		dev_err(&pdev->dev, "kzalloc failed\n");
 		return -ENOMEM;
 	}
+
+	dev = devlink_priv(devlink);
 	priv = &dev->priv;
 	priv->pci_dev_data = id->driver_data;
 
@@ -1364,15 +1374,21 @@ static int init_one(struct pci_dev *pdev,
 		goto clean_health;
 	}
 
+	err = devlink_register(devlink, &pdev->dev);
+	if (err)
+		goto clean_load;
+
 	return 0;
 
+clean_load:
+	mlx5_unload_one(dev, priv);
 clean_health:
 	mlx5_health_cleanup(dev);
 close_pci:
 	mlx5_pci_close(dev, priv);
 clean_dev:
 	pci_set_drvdata(pdev, NULL);
-	kfree(dev);
+	devlink_free(devlink);
 
 	return err;
 }
@@ -1380,8 +1396,10 @@ static int init_one(struct pci_dev *pdev,
 static void remove_one(struct pci_dev *pdev)
 {
 	struct mlx5_core_dev *dev  = pci_get_drvdata(pdev);
+	struct devlink *devlink = priv_to_devlink(dev);
 	struct mlx5_priv *priv = &dev->priv;
 
+	devlink_unregister(devlink);
 	if (mlx5_unload_one(dev, priv)) {
 		dev_err(&dev->pdev->dev, "mlx5_unload_one failed\n");
 		mlx5_health_cleanup(dev);
@@ -1390,7 +1408,7 @@ static void remove_one(struct pci_dev *pdev)
 	mlx5_health_cleanup(dev);
 	mlx5_pci_close(dev, priv);
 	pci_set_drvdata(pdev, NULL);
-	kfree(dev);
+	devlink_free(devlink);
 }
 
 static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev,