提交 fd4e5a5b 编写于 作者: K Kukjin Kim

ARM: S3C2412: cleanup regs-s3c2412.h

Move the regs-s3c2412.h into mach-s3c24xx/s3c2412.c file.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 d2fc6e97
/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
*
* Copyright 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C2412 specific register definitions
*/
#ifndef __ASM_ARCH_REGS_S3C2412_H
#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
#define S3C2412_SWRST_RESET (0x533C2412)
/* see regs-power.h for the other registers in the power block. */
#endif /* __ASM_ARCH_REGS_S3C2412_H */
/* linux/arch/arm/mach-s3c2412/s3c2412.c
*
/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
......@@ -28,28 +27,29 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <plat/cpu-freq.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
#include <mach/regs-gpio.h>
#include <mach/regs-power.h>
#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
#include <plat/s3c2412.h>
#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
#define S3C2412_SWRST_RESET (0x533C2412)
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册