Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 fce65f65 编写于 作者: E Erik Andrén 提交者： Mauro Carvalho Chehab
浏览文件
操作

V4L/DVB (10014): gspca - m5602: Remove all sensor specific write functions. 

Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 6dc4cff0
隐藏空白更改
内联 并排
Showing with 0 addition and 230 deletion
drivers/media/video/gspca/m5602/m5602_mt9m111.c
浏览文件 @ fce65f65
......@@ -266,50 +266,6 @@ int mt9m111_read_sensor(struct sd *sd, const u8 address,
return err;
}
int mt9m111_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len)
{
int err, i;
u8 *p;
struct usb_device *udev = sd->gspca_dev.dev;
__u8 *buf = sd->gspca_dev.usb_buf;
/* No sensor with a data width larger
than 16 bits has yet been seen, nor with 0 :p*/
if (len > 2 || !len)
return -EINVAL;
memcpy(buf, sensor_urb_skeleton,
sizeof(sensor_urb_skeleton));
buf[11] = sd->sensor->i2c_slave_id;
buf[15] = address;
p = buf + 16;
/* Copy a four byte write sequence for each byte to be written to */
for (i = 0; i < len; i++) {
memcpy(p, sensor_urb_skeleton + 16, 4);
p[3] = i2c_data[i];
p += 4;
PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x",
address, i2c_data[i]);
}
/* Copy the tailer */
memcpy(p, sensor_urb_skeleton + 20, 4);
/* Set the total length */
p[3] = 0x10 + len;
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x04, 0x40, 0x19,
0x0000, buf,
20 + len * 4, M5602_URB_MSG_TIMEOUT);
return (err < 0) ? err : 0;
}
static void mt9m111_dump_registers(struct sd *sd)
{
u8 address, value[2] = {0x00, 0x00};
......
drivers/media/video/gspca/m5602/m5602_mt9m111.h
浏览文件 @ fce65f65
......@@ -90,9 +90,6 @@ int mt9m111_power_down(struct sd *sd);
int mt9m111_read_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int mt9m111_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
......
drivers/media/video/gspca/m5602/m5602_ov9650.c
浏览文件 @ fce65f65
......@@ -102,50 +102,6 @@ int ov9650_read_sensor(struct sd *sd, const u8 address,
return (err < 0) ? err : 0;
}
int ov9650_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len)
{
int err, i;
u8 *p;
struct usb_device *udev = sd->gspca_dev.dev;
__u8 *buf = sd->gspca_dev.usb_buf;
/* The ov9650 only supports one byte writes */
if (len > 1 || !len)
return -EINVAL;
memcpy(buf, sensor_urb_skeleton,
sizeof(sensor_urb_skeleton));
buf[11] = sd->sensor->i2c_slave_id;
buf[15] = address;
/* Special case larger sensor writes */
p = buf + 16;
/* Copy a four byte sequence for each byte to write over the I2C bus */
for (i = 0; i < len; i++) {
memcpy(p, sensor_urb_skeleton + 16, 4);
p[3] = i2c_data[i];
p += 4;
PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x",
address, i2c_data[i]);
}
/* Copy the tailer */
memcpy(p, sensor_urb_skeleton + 20, 4);
/* Set the total length */
p[3] = 0x10 + len;
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x04, 0x40, 0x19,
0x0000, buf,
20 + len * 4, M5602_URB_MSG_TIMEOUT);
return (err < 0) ? err : 0;
}
int ov9650_probe(struct sd *sd)
{
u8 prod_id = 0, ver_id = 0, i;
......
drivers/media/video/gspca/m5602/m5602_ov9650.h
浏览文件 @ fce65f65
......@@ -128,8 +128,6 @@ int ov9650_power_down(struct sd *sd);
int ov9650_read_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int ov9650_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
......
drivers/media/video/gspca/m5602/m5602_po1030.c
浏览文件 @ fce65f65
......@@ -99,48 +99,6 @@ int po1030_read_sensor(struct sd *sd, const u8 address,
return err;
}
int po1030_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len)
{
int err, i;
u8 *p;
struct usb_device *udev = sd->gspca_dev.dev;
__u8 *buf = sd->gspca_dev.usb_buf;
/* The po1030 only supports one byte writes */
if (len > 1 || !len)
return -EINVAL;
memcpy(buf, sensor_urb_skeleton, sizeof(sensor_urb_skeleton));
buf[11] = sd->sensor->i2c_slave_id;
buf[15] = address;
p = buf + 16;
/* Copy a four byte write sequence for each byte to be written to */
for (i = 0; i < len; i++) {
memcpy(p, sensor_urb_skeleton + 16, 4);
p[3] = i2c_data[i];
p += 4;
PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x",
address, i2c_data[i]);
}
/* Copy the footer */
memcpy(p, sensor_urb_skeleton + 20, 4);
/* Set the total length */
p[3] = 0x10 + len;
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x04, 0x40, 0x19,
0x0000, buf,
20 + len * 4, M5602_URB_MSG_TIMEOUT);
return (err < 0) ? err : 0;
}
int po1030_init(struct sd *sd)
{
int i, err = 0;
......
drivers/media/video/gspca/m5602/m5602_po1030.h
浏览文件 @ fce65f65
......@@ -130,8 +130,6 @@ int po1030_power_down(struct sd *sd);
int po1030_read_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int po1030_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
......
drivers/media/video/gspca/m5602/m5602_s5k4aa.c
浏览文件 @ fce65f65
......@@ -159,50 +159,6 @@ int s5k4aa_read_sensor(struct sd *sd, const u8 address,
return err;
}
int s5k4aa_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len)
{
int err, i;
u8 *p;
struct usb_device *udev = sd->gspca_dev.dev;
__u8 *buf = sd->gspca_dev.usb_buf;
/* No sensor with a data width larger than 16 bits has yet been seen */
if (len > 2 || !len)
return -EINVAL;
memcpy(buf, sensor_urb_skeleton,
sizeof(sensor_urb_skeleton));
buf[11] = sd->sensor->i2c_slave_id;
buf[15] = address;
/* Special case larger sensor writes */
p = buf + 16;
/* Copy a four byte write sequence for each byte to be written to */
for (i = 0; i < len; i++) {
memcpy(p, sensor_urb_skeleton + 16, 4);
p[3] = i2c_data[i];
p += 4;
PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x",
address, i2c_data[i]);
}
/* Copy the tailer */
memcpy(p, sensor_urb_skeleton + 20, 4);
/* Set the total length */
p[3] = 0x10 + len;
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x04, 0x40, 0x19,
0x0000, buf,
20 + len * 4, M5602_URB_MSG_TIMEOUT);
return (err < 0) ? err : 0;
}
int s5k4aa_init(struct sd *sd)
{
int i, err = 0;
......
drivers/media/video/gspca/m5602/m5602_s5k4aa.h
浏览文件 @ fce65f65
......@@ -69,8 +69,6 @@ int s5k4aa_power_down(struct sd *sd);
int s5k4aa_read_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int s5k4aa_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
......
drivers/media/video/gspca/m5602/m5602_s5k83a.c
浏览文件 @ fce65f65
......@@ -107,50 +107,6 @@ int s5k83a_read_sensor(struct sd *sd, const u8 address,
return err;
}
int s5k83a_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len)
{
int err, i;
u8 *p;
struct usb_device *udev = sd->gspca_dev.dev;
__u8 *buf = sd->gspca_dev.usb_buf;
/* No sensor with a data width larger than 16 bits has yet been seen */
if (len > 2 || !len)
return -EINVAL;
memcpy(buf, sensor_urb_skeleton,
sizeof(sensor_urb_skeleton));
buf[11] = sd->sensor->i2c_slave_id;
buf[15] = address;
/* Special case larger sensor writes */
p = buf + 16;
/* Copy a four byte write sequence for each byte to be written to */
for (i = 0; i < len; i++) {
memcpy(p, sensor_urb_skeleton + 16, 4);
p[3] = i2c_data[i];
p += 4;
PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x",
address, i2c_data[i]);
}
/* Copy the tailer */
memcpy(p, sensor_urb_skeleton + 20, 4);
/* Set the total length */
p[3] = 0x10 + len;
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x04, 0x40, 0x19,
0x0000, buf,
20 + len * 4, M5602_URB_MSG_TIMEOUT);
return (err < 0) ? err : 0;
}
int s5k83a_init(struct sd *sd)
{
int i, err = 0;
......
drivers/media/video/gspca/m5602/m5602_s5k83a.h
浏览文件 @ fce65f65
......@@ -48,8 +48,6 @@ int s5k83a_power_down(struct sd *sd);
int s5k83a_read_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int s5k83a_write_sensor(struct sd *sd, const u8 address,
u8 *i2c_data, const u8 len);
int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
......@@ -62,7 +60,6 @@ int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
static struct m5602_sensor s5k83a = {
.name = "S5K83A",
.probe = s5k83a_probe,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或