Merge tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...

Merge tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...
fcc3a5d2 · Linus Torvalds · 50fa8617 · d86c21fd · fcc3a5d2 · fcc3a5d2
70 changed file
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -312,3 +312,30 @@ a code like this:

 There are also devm_* versions of these functions which release the
 descriptors once the device is released.
+
+MFD devices
+~~~~~~~~~~~
+The MFD devices register their children as platform devices. For the child
+devices there needs to be an ACPI handle that they can use to reference
+parts of the ACPI namespace that relate to them. In the Linux MFD subsystem
+we provide two ways:
+
+	o The children share the parent ACPI handle.
+	o The MFD cell can specify the ACPI id of the device.
+
+For the first case, the MFD drivers do not need to do anything. The
+resulting child platform device will have its ACPI_COMPANION() set to point
+to the parent device.
+
+If the ACPI namespace has a device that we can match using an ACPI id,
+the id should be set like:
+
+	static struct mfd_cell my_subdevice_cell = {
+		.name = "my_subdevice",
+		/* set the resources relative to the parent */
+		.acpi_pnpid = "XYZ0001",
+	};
+
+The ACPI id "XYZ0001" is then used to lookup an ACPI device directly under
+the MFD device and if found, that ACPI companion device is bound to the
+resulting child platform device.
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@ Optional properties:
    the chip default will be used.  If present exactly five values must
    be specified.

+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input singals. If values less than the number of input signals, elements
+    that has not been specifed are set to 0 by default.
+
  - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
    they are being externally supplied. As covered in
    Documentation/devicetree/bindings/regulator/regulator.txt

--- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+* Device tree bindings for Atmel GPBR (General Purpose Backup Registers)
+
+The GPBR are a set of battery-backed registers.
+
+Required properties:
+- compatible:		"atmel,at91sam9260-gpbr", "syscon"
+- reg:			contains offset/length value of the GPBR memory
+			region.
+
+Example:
+
+gpbr: gpbr@fffffd50 {
+	compatible = "atmel,at91sam9260-gpbr", "syscon";
+	reg = <0xfffffd50 0x10>;
+};
--- a/Documentation/devicetree/bindings/mfd/hi6421.txt
+++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
+* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
+
+Required parent device properties:
+- compatible	: contains "hisilicon,hi6421-pmic";
+- reg		: register range space of hi6421;
+
+Supported Hi6421 sub-devices include:
+
+Device                     IRQ Names              Supply Names   Description
+------                     ---------              ------------   -----------
+regulators               :  None                 : None         : Regulators
+
+Required child device properties:
+None.
+
+Example:
+	hi6421 {
+		compatible = "hisilicon,hi6421-pmic";
+		reg = <0xfcc00000 0x0180>; /* 0x60 << 2 */
+
+		regulators {
+			// supply for MLC NAND/ eMMC
+			hi6421_vout0_reg: hi6421_vout0 {
+				regulator-name = "VOUT0";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			// supply for 26M Oscillator
+			hi6421_vout1_reg: hi6421_vout1 {
+				regulator-name = "VOUT1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+          Qualcomm SPMI PMICs multi-function device bindings
+
+The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
+PMICs.  These PMICs use a QPNP scheme through SPMI interface.
+QPNP is effectively a partitioning scheme for dividing the SPMI extended
+register space up into logical pieces, and set of fixed register
+locations/definitions within these regions, with some of these regions
+specifically used for interrupt handling.
+
+The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
+interfaced to the chip via the SPMI (System Power Management Interface) bus.
+Support for multiple independent functions are implemented by splitting the
+16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
+each. A function can consume one or more of these fixed-size register regions.
+
+Required properties:
+- compatible:      Should contain one of:
+                     "qcom,pm8941"
+                     "qcom,pm8841"
+                     "qcom,pma8084"
+                     or generalized "qcom,spmi-pmic".
+- reg:             Specifies the SPMI USID slave address for this device.
+                   For more information see:
+                   Documentation/devicetree/bindings/spmi/spmi.txt
+
+Required properties for peripheral child nodes:
+- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
+
+Optional properties for peripheral child nodes:
+- interrupts:      Interrupts are specified as a 4-tuple. For more information
+                   see:
+                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+- interrupt-names: Corresponding interrupt name to the interrupts property
+
+Each child node of SPMI slave id represents a function of the PMIC. In the
+example below the rtc device node represents a peripheral of pm8941
+SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
+
+Example:
+
+	spmi {
+		compatible = "qcom,spmi-pmic-arb";
+
+		pm8941@0 {
+			compatible = "qcom,pm8941", "qcom,spmi-pmic";
+			reg = <0x0 SPMI_USID>;
+
+			rtc {
+				compatible = "qcom,rtc";
+				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "alarm";
+			};
+		};
+
+		pm8941@1 {
+			compatible = "qcom,pm8941", "qcom,spmi-pmic";
+			reg = <0x1 SPMI_USID>;
+
+			regulator {
+				compatible = "qcom,regulator";
+				regulator-name = "8941_boost";
+			};
+		};
+	};
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8xxx.txt
@@ -61,6 +61,7 @@ The below bindings specify the set of valid subnodes.
 	Definition: must be one of:
 		    "qcom,pm8058-rtc"
 		    "qcom,pm8921-rtc"
+		    "qcom,pm8941-rtc"

 - reg:
 	Usage: required

--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
+RK808 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "rockchip,rk808"
+- reg: I2C slave address
+- interrupt-parent: The parent interrupt controller.
+- interrupts: the interrupt outputs of the controller.
+- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
+  outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
+- rockchip,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
+- vcc8-supply:  The input supply for SWITCH_REG1
+- vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
+- vcc10-supply: The input supply for LDO_REG6
+- vcc11-supply: The input supply for LDO_REG8
+- vcc12-supply: The input supply for SWITCH_REG2
+
+Regulators: All the regulators of RK808 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+	regulator-name {
+		/* standard regulator bindings here */
+	};
+
+Following regulators of the RK808 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK808 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 8.
+	- SWITCH_REGn
+		- valid values for n are 1 to 2
+
+Standard regulator bindings are used inside regulator subnodes. Check
+  Documentation/devicetree/bindings/regulator/regulator.txt
+for more details
+
+Example:
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		reg = <0x1b>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vdd_arm";
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_codec";
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+			};
+		};
+	};
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
+* Ricoh RN5T618 PMIC
+
+Ricoh RN5T618 is a power management IC which integrates 3 step-down
+DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
+fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
+through a I2C interface.
+
+Required properties:
+ - compatible: should be "ricoh,rn5t618"
+ - reg: the I2C slave address of the device
+
+Sub-nodes:
+ - regulators: the node is required if the regulator functionality is
+   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
+   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+   The common bindings for each individual regulator can be found in:
+   Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+
+		regulators {
+			DCDC1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+
+			DCDC2 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+			};
+		};
+	};
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -13,6 +13,7 @@ Optional properties:
 - interrupt-parent             : Specifies which IRQ controller we're connected to
 - wakeup-source                : Marks the input device as wakable
 - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio                     : If present, which GPIO to use for event IRQ

 Example:


--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
 depending on how the external oscillator is wired.

 Optional properties:
- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
-		   SLEEP-to-OFF transition when the system poweroffs.
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip will
+  initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller

 Example:
 &i2c1 {

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6010,6 +6010,15 @@ S:	Supported
 F:	drivers/mcb/
 F:	include/linux/mcb.h

+MEN F21BMC (Board Management Controller)
+M:	Andreas Werner <andreas.werner@men.de>
+S:	Supported
+F:	drivers/mfd/menf21bmc.c
+F:	drivers/watchdog/menf21bmc_wdt.c
+F:	drivers/leds/leds-menf21bmc.c
+F:	drivers/hwmon/menf21bmc_hwmon.c
+F:	Documentation/hwmon/menf21bmc
+
 METAG ARCHITECTURE
 M:	James Hogan <james.hogan@imgtec.com>
 L:	linux-metag@vger.kernel.org

--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -16,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>

+#define I2C_MAX_RETRIES 3
+
 /**
 * struct ec_i2c_device - Driver data for I2C tunnel
 *
@@ -227,7 +229,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
 	msg.indata = response;
 	msg.insize = response_len;

-	result = bus->ec->cmd_xfer(bus->ec, &msg);
+	result = cros_ec_cmd_xfer(bus->ec, &msg);
 	if (result < 0)
 		goto exit;

@@ -290,6 +292,7 @@ static int ec_i2c_probe(struct platform_device *pdev)
 	bus->adap.algo_data = bus;
 	bus->adap.dev.parent = &pdev->dev;
 	bus->adap.dev.of_node = np;
+	bus->adap.retries = I2C_MAX_RETRIES;

 	err = i2c_add_adapter(&bus->adap);
 	if (err) {

--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -157,7 +157,7 @@ static int cros_ec_keyb_get_state(struct cros_ec_keyb *ckdev, uint8_t *kb_state)
 		.insize = ckdev->cols,
 	};

-	return ckdev->ec->cmd_xfer(ckdev->ec, &msg);
+	return cros_ec_cmd_xfer(ckdev->ec, &msg);
 }

 static irqreturn_t cros_ec_keyb_irq(int irq, void *data)

--- a/drivers/mfd/88pm860x-i2c.c
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -122,7 +122,7 @@ static int read_device(struct i2c_client *i2c, int reg,
 static int write_device(struct i2c_client *i2c, int reg,
 			int bytes, void *src)
 {
-	unsigned char buf[bytes + 1];
+	unsigned char buf[2];
 	struct i2c_adapter *adap = i2c->adapter;
 	struct i2c_msg msg;
 	int ret;
@@ -140,26 +140,6 @@ static int write_device(struct i2c_client *i2c, int reg,
 	return 0;
 }

-int pm860x_page_reg_read(struct i2c_client *i2c, int reg)
-{
-	unsigned char zero = 0;
-	unsigned char data;
-	int ret;
-
-	i2c_lock_adapter(i2c->adapter);
-	read_device(i2c, 0xFA, 0, &zero);
-	read_device(i2c, 0xFB, 0, &zero);
-	read_device(i2c, 0xFF, 0, &zero);
-	ret = read_device(i2c, reg, 1, &data);
-	if (ret >= 0)
-		ret = (int)data;
-	read_device(i2c, 0xFE, 0, &zero);
-	read_device(i2c, 0xFC, 0, &zero);
-	i2c_unlock_adapter(i2c->adapter);
-	return ret;
-}
-EXPORT_SYMBOL(pm860x_page_reg_read);
-
 int pm860x_page_reg_write(struct i2c_client *i2c, int reg,
 			  unsigned char data)
 {
@@ -195,47 +175,3 @@ int pm860x_page_bulk_read(struct i2c_client *i2c, int reg,
 	return ret;
 }
 EXPORT_SYMBOL(pm860x_page_bulk_read);
-
-int pm860x_page_bulk_write(struct i2c_client *i2c, int reg,
-			   int count, unsigned char *buf)
-{
-	unsigned char zero = 0;
-	int ret;
-
-	i2c_lock_adapter(i2c->adapter);
-	read_device(i2c, 0xFA, 0, &zero);
-	read_device(i2c, 0xFB, 0, &zero);
-	read_device(i2c, 0xFF, 0, &zero);
-	ret = write_device(i2c, reg, count, buf);
-	read_device(i2c, 0xFE, 0, &zero);
-	read_device(i2c, 0xFC, 0, &zero);
-	i2c_unlock_adapter(i2c->adapter);
-	i2c_unlock_adapter(i2c->adapter);
-	return ret;
-}
-EXPORT_SYMBOL(pm860x_page_bulk_write);
-
-int pm860x_page_set_bits(struct i2c_client *i2c, int reg,
-			 unsigned char mask, unsigned char data)
-{
-	unsigned char zero;
-	unsigned char value;
-	int ret;
-
-	i2c_lock_adapter(i2c->adapter);
-	read_device(i2c, 0xFA, 0, &zero);
-	read_device(i2c, 0xFB, 0, &zero);
-	read_device(i2c, 0xFF, 0, &zero);
-	ret = read_device(i2c, reg, 1, &value);
-	if (ret < 0)
-		goto out;
-	value &= ~mask;
-	value |= data;
-	ret = write_device(i2c, reg, 1, &value);
-out:
-	read_device(i2c, 0xFE, 0, &zero);
-	read_device(i2c, 0xFC, 0, &zero);
-	i2c_unlock_adapter(i2c->adapter);
-	return ret;
-}
-EXPORT_SYMBOL(pm860x_page_set_bits);
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -210,6 +210,19 @@ config MFD_MC13XXX_I2C
 	help
 	  Select this if your MC13xxx is connected via an I2C bus.

+config MFD_HI6421_PMIC
+	tristate "HiSilicon Hi6421 PMU/Codec IC"
+	depends on OF
+	select MFD_CORE
+	select REGMAP_MMIO
+	help
+	  Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
+	  functions, such as regulators, RTC, codec, Coulomb counter, etc.
+	  This driver includes core APIs _only_. You have to select
+	  individul components like voltage regulators under corresponding
+	  menus in order to enable them.
+	  We communicate with the Hi6421 via memory-mapped I/O.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GPIOLIB && ARM
@@ -554,6 +567,21 @@ config MFD_PM8921_CORE
 	  Say M here if you want to include support for PM8921 chip as a module.
 	  This will build a module called "pm8921-core".

+config MFD_SPMI_PMIC
+	tristate "Qualcomm SPMI PMICs"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on OF
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  This enables support for the Qualcomm SPMI PMICs.
+	  These PMICs are currently used with the Snapdragon 800 series of
+	  SoCs.  Note, that this will only be useful paired with descriptions
+	  of the independent functions as children nodes in the device tree.
+
+	  Say M here if you want to include support for the SPMI PMIC
+	  series as a module.  The module will be called "qcom-spmi-pmic".
+
 config MFD_RDC321X
 	tristate "RDC R-321x southbridge"
 	select MFD_CORE
@@ -597,6 +625,30 @@ config MFD_RC5T583
 	  Additional drivers must be enabled in order to use the
 	  different functionality of the device.

+config MFD_RK808
+	tristate "Rockchip RK808 Power Management chip"
+	depends on I2C && OF
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  If you say yes here you get support for the RK808
+	  Power Management chips.
+	  This driver provides common support for accessing the device
+	  through I2C interface. The device supports multiple sub-devices
+	  including interrupts, RTC, LDO & DCDC regulators, and onkey.
+
+config MFD_RN5T618
+	tristate "Ricoh RN5T5618 PMIC"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Say yes here to add support for the Ricoh RN5T618 PMIC. This
+	  driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_SEC_CORE
 	bool "SAMSUNG Electronics PMIC Series Support"
 	depends on I2C=y
@@ -1243,11 +1295,11 @@ config MFD_WM8350_I2C
 	  selected to enable support for the functionality of the chip.

 config MFD_WM8994
-	bool "Wolfson Microelectronics WM8994"
+	tristate "Wolfson Microelectronics WM8994"
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y
+	depends on I2C
 	help
 	  The WM8994 is a highly integrated hi-fi CODEC designed for
 	  smartphone applicatiosn.  As well as audio functionality it

--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE)	+= si476x-core.o
 obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
+obj-$(CONFIG_MFD_SPMI_PMIC)	+= qcom-spmi-pmic.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
@@ -160,6 +161,8 @@ obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
 obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
+obj-$(CONFIG_MFD_RK808)		+= rk808.o
+obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
@@ -170,6 +173,7 @@ obj-$(CONFIG_MFD_AS3722)	+= as3722.o
 obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
+obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o

 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -393,18 +393,6 @@ static int arizona_runtime_resume(struct device *dev)
 		break;
 	}

-	switch (arizona->type) {
-	case WM5102:
-		ret = wm5102_patch(arizona);
-		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to apply patch: %d\n",
-				ret);
-			goto err;
-		}
-	default:
-		break;
-	}
-
 	ret = regcache_sync(arizona->regmap);
 	if (ret != 0) {
 		dev_err(arizona->dev, "Failed to restore register cache\n");
@@ -534,7 +522,11 @@ EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
 static int arizona_of_get_core_pdata(struct arizona *arizona)
 {
 	struct arizona_pdata *pdata = &arizona->pdata;
+	struct property *prop;
+	const __be32 *cur;
+	u32 val;
 	int ret, i;
+	int count = 0;

 	pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);

@@ -560,6 +552,15 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
 			ret);
 	}

+	of_property_for_each_u32(arizona->dev->of_node, "wlf,inmode", prop,
+				 cur, val) {
+		if (count == ARRAY_SIZE(arizona->pdata.inmode))
+			break;
+
+		arizona->pdata.inmode[count] = val;
+		count++;
+	}
+
 	return 0;
 }

@@ -784,7 +785,8 @@ int arizona_dev_init(struct arizona *arizona)
 	/* Ensure device startup is complete */
 	switch (arizona->type) {
 	case WM5102:
-		ret = regmap_read(arizona->regmap, 0x19, &val);
+		ret = regmap_read(arizona->regmap,
+				  ARIZONA_WRITE_SEQUENCER_CTRL_3, &val);
 		if (ret != 0)
 			dev_err(dev,
 				"Failed to check write sequencer state: %d\n",
@@ -945,6 +947,7 @@ int arizona_dev_init(struct arizona *arizona)
 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_MIC_BIAS_CTRL_1 + i,
 				   ARIZONA_MICB1_LVL_MASK |
+				   ARIZONA_MICB1_EXT_CAP |
 				   ARIZONA_MICB1_DISCH |
 				   ARIZONA_MICB1_BYPASS |
 				   ARIZONA_MICB1_RATE, val);

--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -152,10 +152,18 @@ static void arizona_irq_disable(struct irq_data *data)
 {
 }

+static int arizona_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct arizona *arizona = irq_data_get_irq_chip_data(data);
+
+	return irq_set_irq_wake(arizona->irq, on);
+}
+
 static struct irq_chip arizona_irq_chip = {
 	.name			= "arizona",
 	.irq_disable		= arizona_irq_disable,
 	.irq_enable		= arizona_irq_enable,
+	.irq_set_wake		= arizona_irq_set_wake,
 };

 static int arizona_irq_map(struct irq_domain *h, unsigned int virq,
@@ -164,7 +172,7 @@ static int arizona_irq_map(struct irq_domain *h, unsigned int virq,
 	struct regmap_irq_chip_data *data = h->host_data;

 	irq_set_chip_data(virq, data);
-	irq_set_chip_and_handler(virq, &arizona_irq_chip, handle_edge_irq);
+	irq_set_chip_and_handler(virq, &arizona_irq_chip, handle_simple_irq);
 	irq_set_nested_thread(virq, 1);

 	/* ARM needs us to explicitly flag the IRQ as valid
@@ -282,7 +290,7 @@ int arizona_irq_init(struct arizona *arizona)

 	ret = regmap_add_irq_chip(arizona->regmap,
 				  irq_create_mapping(arizona->virq, 0),
-				  IRQF_ONESHOT, -1, aod,
+				  IRQF_ONESHOT, 0, aod,
 				  &arizona->aod_irq_chip);
 	if (ret != 0) {
 		dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret);
@@ -291,7 +299,7 @@ int arizona_irq_init(struct arizona *arizona)

 	ret = regmap_add_irq_chip(arizona->regmap,
 				  irq_create_mapping(arizona->virq, 1),
-				  IRQF_ONESHOT, -1, irq,
+				  IRQF_ONESHOT, 0, irq,
 				  &arizona->irq_chip);
 	if (ret != 0) {
 		dev_err(arizona->dev, "Failed to add main IRQs: %d\n", ret);

--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -140,15 +140,6 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
 	.init_ack_masked	= true,
 };

-static const char * const axp20x_supplies[] = {
-	"acin",
-	"vin2",
-	"vin3",
-	"ldo24in",
-	"ldo3in",
-	"ldo5in",
-};
-
 static struct mfd_cell axp20x_cells[] = {
 	{
 		.name			= "axp20x-pek",
@@ -156,8 +147,6 @@ static struct mfd_cell axp20x_cells[] = {
 		.resources		= axp20x_pek_resources,
 	}, {
 		.name			= "axp20x-regulator",
-		.parent_supplies	= axp20x_supplies,
-		.num_parent_supplies	= ARRAY_SIZE(axp20x_supplies),
 	},
 };


--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -23,6 +23,9 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/mfd/cros_ec_commands.h>
+#include <linux/delay.h>
+
+#define EC_COMMAND_RETRIES	50

 int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
 		       struct cros_ec_command *msg)
@@ -62,6 +65,49 @@ int cros_ec_check_result(struct cros_ec_device *ec_dev,
 }
 EXPORT_SYMBOL(cros_ec_check_result);

+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+		     struct cros_ec_command *msg)
+{
+	int ret;
+
+	mutex_lock(&ec_dev->lock);
+	ret = ec_dev->cmd_xfer(ec_dev, msg);
+	if (msg->result == EC_RES_IN_PROGRESS) {
+		int i;
+		struct cros_ec_command status_msg;
+		struct ec_response_get_comms_status status;
+
+		status_msg.version = 0;
+		status_msg.command = EC_CMD_GET_COMMS_STATUS;
+		status_msg.outdata = NULL;
+		status_msg.outsize = 0;
+		status_msg.indata = (uint8_t *)&status;
+		status_msg.insize = sizeof(status);
+
+		/*
+		 * Query the EC's status until it's no longer busy or
+		 * we encounter an error.
+		 */
+		for (i = 0; i < EC_COMMAND_RETRIES; i++) {
+			usleep_range(10000, 11000);
+
+			ret = ec_dev->cmd_xfer(ec_dev, &status_msg);
+			if (ret < 0)
+				break;
+
+			msg->result = status_msg.result;
+			if (status_msg.result != EC_RES_SUCCESS)
+				break;
+			if (!(status.flags & EC_COMMS_STATUS_PROCESSING))
+				break;
+		}
+	}
+	mutex_unlock(&ec_dev->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(cros_ec_cmd_xfer);
+
 static const struct mfd_cell cros_devs[] = {
 	{
 		.name = "cros-ec-keyb",
@@ -91,6 +137,8 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 			return -ENOMEM;
 	}

+	mutex_init(&ec_dev->lock);
+
 	err = mfd_add_devices(dev, 0, cros_devs,
 			      ARRAY_SIZE(cros_devs),
 			      NULL, ec_dev->irq, NULL);

--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -65,6 +65,12 @@
  */
 #define EC_SPI_RECOVERY_TIME_NS	(200 * 1000)

+/*
+ * The EC is unresponsive for a time after a reboot command.  Add a
+ * simple delay to make sure that the bus stays locked.
+ */
+#define EC_REBOOT_DELAY_MS	50
+
 /**
 * struct cros_ec_spi - information about a SPI-connected EC
 *
@@ -73,13 +79,11 @@
 *	if no record
 * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
 *      is sent when we want to turn off CS at the end of a transaction.
- * @lock: mutex to ensure only one user of cros_ec_cmd_xfer_spi at a time
 */
 struct cros_ec_spi {
 	struct spi_device *spi;
 	s64 last_transfer_ns;
 	unsigned int end_of_msg_delay;
-	struct mutex lock;
 };

 static void debug_packet(struct device *dev, const char *name, u8 *ptr,
@@ -226,13 +230,6 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	int sum;
 	int ret = 0, final_ret;

-	/*
-	 * We have the shared ec_dev buffer plus we do lots of separate spi_sync
-	 * calls, so we need to make sure only one person is using this at a
-	 * time.
-	 */
-	mutex_lock(&ec_spi->lock);
-
 	len = cros_ec_prepare_tx(ec_dev, ec_msg);
 	dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);

@@ -318,7 +315,9 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,

 	ret = len;
 exit:
-	mutex_unlock(&ec_spi->lock);
+	if (ec_msg->command == EC_CMD_REBOOT_EC)
+		msleep(EC_REBOOT_DELAY_MS);
+
 	return ret;
 }

@@ -350,7 +349,6 @@ static int cros_ec_spi_probe(struct spi_device *spi)
 	if (ec_spi == NULL)
 		return -ENOMEM;
 	ec_spi->spi = spi;
-	mutex_init(&ec_spi->lock);
 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
 	if (!ec_dev)
 		return -ENOMEM;

--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -522,7 +522,7 @@ static const struct mfd_cell da9052_subdev_info[] = {
 	},
 };

-struct regmap_config da9052_regmap_config = {
+const struct regmap_config da9052_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,


--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -140,13 +140,6 @@ static int da9052_i2c_probe(struct i2c_client *client,
 	if (!da9052)
 		return -ENOMEM;

-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_BYTE_DATA)) {
-		dev_info(&client->dev, "Error in %s:i2c_check_functionality\n",
-			 __func__);
-		return  -ENODEV;
-	}
-
 	da9052->dev = &client->dev;
 	da9052->chip_irq = client->irq;
 	da9052->fix_io = da9052_i2c_fix;

--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -23,6 +23,7 @@

 static int da9052_spi_probe(struct spi_device *spi)
 {
+	struct regmap_config config;
 	int ret;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	struct da9052 *da9052;
@@ -40,10 +41,10 @@ static int da9052_spi_probe(struct spi_device *spi)

 	spi_set_drvdata(spi, da9052);

-	da9052_regmap_config.read_flag_mask = 1;
-	da9052_regmap_config.write_flag_mask = 0;
+	config = da9052_regmap_config;
+	config.read_flag_mask = 1;

-	da9052->regmap = devm_regmap_init_spi(spi, &da9052_regmap_config);
+	da9052->regmap = devm_regmap_init_spi(spi, &config);
 	if (IS_ERR(da9052->regmap)) {
 		ret = PTR_ERR(da9052->regmap);
 		dev_err(&spi->dev, "Failed to allocate register map: %d\n",

--- a/drivers/mfd/hi6421-pmic-core.c
+++ b/drivers/mfd/hi6421-pmic-core.c
+/*
+ * Device driver for Hi6421 IC
+ *
+ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
+ *              http://www.hisilicon.com
+ * Copyright (c) <2013-2014> Linaro Ltd.
+ *              http://www.linaro.org
+ *
+ * Author: Guodong Xu <guodong.xu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/hi6421-pmic.h>
+
+static const struct mfd_cell hi6421_devs[] = {
+	{ .name = "hi6421-regulator", },
+};
+
+static struct regmap_config hi6421_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 8,
+	.max_register = HI6421_REG_TO_BUS_ADDR(HI6421_REG_MAX),
+};
+
+static int hi6421_pmic_probe(struct platform_device *pdev)
+{
+	struct hi6421_pmic *pmic;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+						 &hi6421_regmap_config);
+	if (IS_ERR(pmic->regmap)) {
+		dev_err(&pdev->dev,
+			"regmap init failed: %ld\n", PTR_ERR(pmic->regmap));
+		return PTR_ERR(pmic->regmap);
+	}
+
+	/* set over-current protection debounce 8ms */
+	regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
+				(HI6421_OCP_DEB_SEL_MASK
+				 | HI6421_OCP_EN_DEBOUNCE_MASK
+				 | HI6421_OCP_AUTO_STOP_MASK),
+				(HI6421_OCP_DEB_SEL_8MS
+				 | HI6421_OCP_EN_DEBOUNCE_ENABLE));
+
+	platform_set_drvdata(pdev, pmic);
+
+	ret = mfd_add_devices(&pdev->dev, 0, hi6421_devs,
+			ARRAY_SIZE(hi6421_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "add mfd devices failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int hi6421_pmic_remove(struct platform_device *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+
+	return 0;
+}
+
+static struct of_device_id of_hi6421_pmic_match_tbl[] = {
+	{ .compatible = "hisilicon,hi6421-pmic", },
+	{ },
+};
+
+static struct platform_driver hi6421_pmic_driver = {
+	.driver = {
+		.name	= "hi6421_pmic",
+		.of_match_table = of_hi6421_pmic_match_tbl,
+	},
+	.probe	= hi6421_pmic_probe,
+	.remove	= hi6421_pmic_remove,
+};
+module_platform_driver(hi6421_pmic_driver);
+
+MODULE_AUTHOR("Guodong Xu <guodong.xu@linaro.org>");
+MODULE_DESCRIPTION("Hi6421 PMIC driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/mfd/htc-i2cpld.c
+++ b/drivers/mfd/htc-i2cpld.c
@@ -227,15 +227,12 @@ static irqreturn_t htcpld_handler(int irq, void *dev)
 static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
 {
 	struct i2c_client *client;
-	struct htcpld_chip *chip_data;
+	struct htcpld_chip *chip_data =
+		container_of(chip, struct htcpld_chip, chip_out);
 	unsigned long flags;

-	chip_data = container_of(chip, struct htcpld_chip, chip_out);
-	if (!chip_data)
-		return;
-
 	client = chip_data->client;
-	if (client == NULL)
+	if (!client)
 		return;

 	spin_lock_irqsave(&chip_data->lock, flags);
@@ -261,31 +258,18 @@ static void htcpld_chip_set_ni(struct work_struct *work)
 static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct htcpld_chip *chip_data;
-	int val = 0;
-	int is_input = 0;
-
-	/* Try out first */
-	chip_data = container_of(chip, struct htcpld_chip, chip_out);
-	if (!chip_data) {
-		/* Try in */
-		is_input = 1;
-		chip_data = container_of(chip, struct htcpld_chip, chip_in);
-		if (!chip_data)
-			return -EINVAL;
-	}
+	u8 cache;

-	/* Determine if this is an input or output GPIO */
-	if (!is_input)
-		/* Use the output cache */
-		val = (chip_data->cache_out >> offset) & 1;
-	else
-		/* Use the input cache */
-		val = (chip_data->cache_in >> offset) & 1;
+	if (!strncmp(chip->label, "htcpld-out", 10)) {
+		chip_data = container_of(chip, struct htcpld_chip, chip_out);
+		cache = chip_data->cache_out;
+	} else if (!strncmp(chip->label, "htcpld-in", 9)) {
+		chip_data = container_of(chip, struct htcpld_chip, chip_in);
+		cache = chip_data->cache_in;
+	} else
+		return -EINVAL;

-	if (val)
-		return 1;
-	else
-		return 0;
+	return (cache >> offset) & 1;
 }

 static int htcpld_direction_output(struct gpio_chip *chip,
@@ -376,7 +360,7 @@ static int htcpld_register_chip_i2c(
 	plat_chip_data = &pdata->chip[chip_index];

 	adapter = i2c_get_adapter(pdata->i2c_adapter_id);
-	if (adapter == NULL) {
+	if (!adapter) {
 		/* Eek, no such I2C adapter!  Bail out. */
 		dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
 			 plat_chip_data->addr, pdata->i2c_adapter_id);

--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -115,6 +115,7 @@ static void intel_soc_pmic_shutdown(struct i2c_client *i2c)
 	return;
 }

+#if defined(CONFIG_PM_SLEEP)
 static int intel_soc_pmic_suspend(struct device *dev)
 {
 	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
@@ -132,6 +133,7 @@ static int intel_soc_pmic_resume(struct device *dev)

 	return 0;
 }
+#endif

 static SIMPLE_DEV_PM_OPS(intel_soc_pmic_pm_ops, intel_soc_pmic_suspend,
 			 intel_soc_pmic_resume);

--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -54,6 +54,7 @@
 *	document number TBD : Avoton SoC
 *	document number TBD : Coleto Creek
 *	document number TBD : Wildcat Point-LP
+ *	document number TBD : 9 Series
 */

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -216,6 +217,8 @@ enum lpc_chipsets {
 	LPC_BAYTRAIL,   /* Bay Trail SoC */
 	LPC_COLETO,	/* Coleto Creek */
 	LPC_WPT_LP,	/* Wildcat Point-LP */
+	LPC_BRASWELL,	/* Braswell SoC */
+	LPC_9S,		/* 9 Series */
 };

 static struct lpc_ich_info lpc_chipset_info[] = {
@@ -519,6 +522,14 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Wildcat Point_LP",
 		.iTCO_version = 2,
 	},
+	[LPC_BRASWELL] = {
+		.name = "Braswell SoC",
+		.iTCO_version = 3,
+	},
+	[LPC_9S] = {
+		.name = "9 Series",
+		.iTCO_version = 2,
+	},
 };

 /*
@@ -745,6 +756,12 @@ static const struct pci_device_id lpc_ich_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x9cc6), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc7), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc9), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x229c), LPC_BRASWELL},
+	{ PCI_VDEVICE(INTEL, 0x8cc1), LPC_9S},
+	{ PCI_VDEVICE(INTEL, 0x8cc2), LPC_9S},
+	{ PCI_VDEVICE(INTEL, 0x8cc3), LPC_9S},
+	{ PCI_VDEVICE(INTEL, 0x8cc4), LPC_9S},
+	{ PCI_VDEVICE(INTEL, 0x8cc6), LPC_9S},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, lpc_ich_ids);

--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -7,6 +7,7 @@
 *  Configuration Registers.
 *
 *  Copyright (c) 2010 CompuLab Ltd
+ *  Copyright (c) 2014 Intel Corp.
 *  Author: Denis Turischev <denis@compulab.co.il>
 *
 *  This program is free software; you can redistribute it and/or modify
@@ -17,10 +18,6 @@
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

 #include <linux/kernel.h>
@@ -37,123 +34,165 @@
 #define GPIO_IO_SIZE	64
 #define GPIO_IO_SIZE_CENTERTON	128

+/* Intel Quark X1000 GPIO IRQ Number */
+#define GPIO_IRQ_QUARK_X1000	9
+
 #define WDTBASE		0x84
 #define WDT_IO_SIZE	64

-static struct resource smbus_sch_resource = {
-		.flags = IORESOURCE_IO,
-};
-
-static struct resource gpio_sch_resource = {
-		.flags = IORESOURCE_IO,
-};
-
-static struct resource wdt_sch_resource = {
-		.flags = IORESOURCE_IO,
+enum sch_chipsets {
+	LPC_SCH = 0,		/* Intel Poulsbo SCH */
+	LPC_ITC,		/* Intel Tunnel Creek */
+	LPC_CENTERTON,		/* Intel Centerton */
+	LPC_QUARK_X1000,	/* Intel Quark X1000 */
 };

-static struct mfd_cell lpc_sch_cells[3];
-
-static struct mfd_cell isch_smbus_cell = {
-	.name = "isch_smbus",
-	.num_resources = 1,
-	.resources = &smbus_sch_resource,
-	.ignore_resource_conflicts = true,
+struct lpc_sch_info {
+	unsigned int io_size_smbus;
+	unsigned int io_size_gpio;
+	unsigned int io_size_wdt;
+	int irq_gpio;
 };

-static struct mfd_cell sch_gpio_cell = {
-	.name = "sch_gpio",
-	.num_resources = 1,
-	.resources = &gpio_sch_resource,
-	.ignore_resource_conflicts = true,
-};
-
-static struct mfd_cell wdt_sch_cell = {
-	.name = "ie6xx_wdt",
-	.num_resources = 1,
-	.resources = &wdt_sch_resource,
-	.ignore_resource_conflicts = true,
+static struct lpc_sch_info sch_chipset_info[] = {
+	[LPC_SCH] = {
+		.io_size_smbus = SMBUS_IO_SIZE,
+		.io_size_gpio = GPIO_IO_SIZE,
+		.irq_gpio = -1,
+	},
+	[LPC_ITC] = {
+		.io_size_smbus = SMBUS_IO_SIZE,
+		.io_size_gpio = GPIO_IO_SIZE,
+		.io_size_wdt = WDT_IO_SIZE,
+		.irq_gpio = -1,
+	},
+	[LPC_CENTERTON] = {
+		.io_size_smbus = SMBUS_IO_SIZE,
+		.io_size_gpio = GPIO_IO_SIZE_CENTERTON,
+		.io_size_wdt = WDT_IO_SIZE,
+		.irq_gpio = -1,
+	},
+	[LPC_QUARK_X1000] = {
+		.io_size_gpio = GPIO_IO_SIZE,
+		.irq_gpio = GPIO_IRQ_QUARK_X1000,
+	},
 };

 static const struct pci_device_id lpc_sch_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB) },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC), LPC_SCH },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC), LPC_ITC },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB), LPC_CENTERTON },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB), LPC_QUARK_X1000 },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, lpc_sch_ids);

-static int lpc_sch_probe(struct pci_dev *dev,
-				const struct pci_device_id *id)
+#define LPC_NO_RESOURCE		1
+#define LPC_SKIP_RESOURCE	2
+
+static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name,
+			  struct resource *res, int size)
 {
 	unsigned int base_addr_cfg;
 	unsigned short base_addr;
-	int i, cells = 0;
-	int ret;

-	pci_read_config_dword(dev, SMBASE, &base_addr_cfg);
+	if (size == 0)
+		return LPC_NO_RESOURCE;
+
+	pci_read_config_dword(pdev, where, &base_addr_cfg);
 	base_addr = 0;
 	if (!(base_addr_cfg & (1 << 31)))
-		dev_warn(&dev->dev, "Decode of the SMBus I/O range disabled\n");
+		dev_warn(&pdev->dev, "Decode of the %s I/O range disabled\n",
+			 name);
 	else
 		base_addr = (unsigned short)base_addr_cfg;

 	if (base_addr == 0) {
-		dev_warn(&dev->dev, "I/O space for SMBus uninitialized\n");
-	} else {
-		lpc_sch_cells[cells++] = isch_smbus_cell;
-		smbus_sch_resource.start = base_addr;
-		smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1;
+		dev_warn(&pdev->dev, "I/O space for %s uninitialized\n", name);
+		return LPC_SKIP_RESOURCE;
 	}

-	pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg);
-	base_addr = 0;
-	if (!(base_addr_cfg & (1 << 31)))
-		dev_warn(&dev->dev, "Decode of the GPIO I/O range disabled\n");
-	else
-		base_addr = (unsigned short)base_addr_cfg;
+	res->start = base_addr;
+	res->end = base_addr + size - 1;
+	res->flags = IORESOURCE_IO;

-	if (base_addr == 0) {
-		dev_warn(&dev->dev, "I/O space for GPIO uninitialized\n");
-	} else {
-		lpc_sch_cells[cells++] = sch_gpio_cell;
-		gpio_sch_resource.start = base_addr;
-		if (id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB)
-			gpio_sch_resource.end = base_addr + GPIO_IO_SIZE_CENTERTON - 1;
-		else
-			gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1;
-	}
+	return 0;
+}

-	if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC
-	    || id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) {
-		pci_read_config_dword(dev, WDTBASE, &base_addr_cfg);
-		base_addr = 0;
-		if (!(base_addr_cfg & (1 << 31)))
-			dev_warn(&dev->dev, "Decode of the WDT I/O range disabled\n");
-		else
-			base_addr = (unsigned short)base_addr_cfg;
-		if (base_addr == 0)
-			dev_warn(&dev->dev, "I/O space for WDT uninitialized\n");
-		else {
-			lpc_sch_cells[cells++] = wdt_sch_cell;
-			wdt_sch_resource.start = base_addr;
-			wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1;
-		}
-	}
+static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
+				 const char *name, int size, int irq,
+				 int id, struct mfd_cell *cell)
+{
+	struct resource *res;
+	int ret;

-	if (WARN_ON(cells > ARRAY_SIZE(lpc_sch_cells))) {
-		dev_err(&dev->dev, "Cell count exceeds array size");
-		return -ENODEV;
-	}
+	res = devm_kcalloc(&pdev->dev, 2, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	ret = lpc_sch_get_io(pdev, where, name, res, size);
+	if (ret)
+		return ret;
+
+	memset(cell, 0, sizeof(*cell));
+
+	cell->name = name;
+	cell->resources = res;
+	cell->num_resources = 1;
+	cell->ignore_resource_conflicts = true;
+	cell->id = id;
+
+	/* Check if we need to add an IRQ resource */
+	if (irq < 0)
+		return 0;
+
+	res++;
+
+	res->start = irq;
+	res->end = irq;
+	res->flags = IORESOURCE_IRQ;
+
+	cell->num_resources++;
+
+	return 0;
+}
+
+static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct mfd_cell lpc_sch_cells[3];
+	struct lpc_sch_info *info = &sch_chipset_info[id->driver_data];
+	unsigned int cells = 0;
+	int ret;
+
+	ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus",
+				    info->io_size_smbus, -1,
+				    id->device, &lpc_sch_cells[cells]);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		cells++;
+
+	ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio",
+				    info->io_size_gpio, info->irq_gpio,
+				    id->device, &lpc_sch_cells[cells]);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		cells++;
+
+	ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt",
+				    info->io_size_wdt, -1,
+				    id->device, &lpc_sch_cells[cells]);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		cells++;

 	if (cells == 0) {
 		dev_err(&dev->dev, "All decode registers disabled.\n");
 		return -ENODEV;
 	}

-	for (i = 0; i < cells; i++)
-		lpc_sch_cells[i].id = id->device;
-
 	ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
 	if (ret)
 		mfd_remove_devices(&dev->dev);

--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -456,8 +456,7 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
 	}

 	ret = mfd_add_devices(max14577->dev, -1, mfd_devs,
-			mfd_devs_size, NULL, 0,
-			regmap_irq_get_domain(max14577->irq_data));
+			mfd_devs_size, NULL, 0, NULL);
 	if (ret < 0)
 		goto err_mfd;


--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -52,7 +52,7 @@ static const struct mfd_cell max77802_devs[] = {
 static bool max77802_pmic_is_accessible_reg(struct device *dev,
 					    unsigned int reg)
 {
-	return (reg >= MAX77802_REG_DEVICE_ID && reg < MAX77802_REG_PMIC_END);
+	return reg < MAX77802_REG_PMIC_END;
 }

 static bool max77802_rtc_is_accessible_reg(struct device *dev,

--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -44,9 +44,12 @@
 static const struct mfd_cell max77693_devs[] = {
 	{ .name = "max77693-pmic", },
 	{ .name = "max77693-charger", },
-	{ .name = "max77693-flash", },
 	{ .name = "max77693-muic", },
 	{ .name = "max77693-haptic", },
+	{
+		.name = "max77693-flash",
+		.of_compatible = "maxim,max77693-flash",
+	},
 };

 static const struct regmap_config max77693_regmap_config = {

--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -37,7 +37,7 @@ static inline int max8925_read_device(struct i2c_client *i2c,
 static inline int max8925_write_device(struct i2c_client *i2c,
 				       int reg, int bytes, void *src)
 {
-	unsigned char buf[bytes + 1];
+	unsigned char buf[9];
 	int ret;

 	buf[0] = (unsigned char)reg;

--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -36,6 +36,9 @@
 #define MC34708_REVISION_FIN		(0x07 <<  6)
 #define MC34708_REVISION_FAB		(0x07 <<  9)

+#define MC13XXX_PWRCTRL		15
+#define MC13XXX_PWRCTRL_WDIRESET	(1 << 12)
+
 #define MC13XXX_ADC1		44
 #define MC13XXX_ADC1_ADEN		(1 << 0)
 #define MC13XXX_ADC1_RAND		(1 << 1)
@@ -416,6 +419,11 @@ int mc13xxx_common_init(struct device *dev)

 	mc13xxx->variant->print_revision(mc13xxx, revision);

+	ret = mc13xxx_reg_rmw(mc13xxx, MC13XXX_PWRCTRL,
+			MC13XXX_PWRCTRL_WDIRESET, MC13XXX_PWRCTRL_WDIRESET);
+	if (ret)
+		return ret;
+
 	for (i = 0; i < ARRAY_SIZE(mc13xxx->irqs); i++) {
 		mc13xxx->irqs[i].reg_offset = i / MC13XXX_IRQ_PER_REG;
 		mc13xxx->irqs[i].mask = BIT(i % MC13XXX_IRQ_PER_REG);

--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -466,8 +466,6 @@ static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
 	struct i2c_client *c = the_menelaus->client;

 	mutex_lock(&the_menelaus->lock);
-	if (!vtg)
-		goto set_voltage;

 	ret = menelaus_read_reg(vtg->vtg_reg);
 	if (ret < 0)
@@ -482,7 +480,6 @@ static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
 	ret = menelaus_write_reg(vtg->vtg_reg, val);
 	if (ret < 0)
 		goto out;
-set_voltage:
 	ret = menelaus_write_reg(vtg->mode_reg, mode);
 out:
 	mutex_unlock(&the_menelaus->lock);
@@ -1186,7 +1183,7 @@ static int menelaus_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
 	struct menelaus_chip	*menelaus;
-	int			rev = 0, val;
+	int			rev = 0;
 	int			err = 0;
 	struct menelaus_platform_data *menelaus_pdata =
 					dev_get_platdata(&client->dev);
@@ -1239,10 +1236,10 @@ static int menelaus_probe(struct i2c_client *client,

 	pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);

-	val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
-	if (val < 0)
+	err = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+	if (err < 0)
 		goto fail;
-	if (val & (1 << 7))
+	if (err & BIT(7))
 		menelaus->vcore_hw_mode = 1;
 	else
 		menelaus->vcore_hw_mode = 0;

--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -78,6 +78,44 @@ static int mfd_platform_add_cell(struct platform_device *pdev,
 	return 0;
 }

+#if IS_ENABLED(CONFIG_ACPI)
+static void mfd_acpi_add_device(const struct mfd_cell *cell,
+				struct platform_device *pdev)
+{
+	struct acpi_device *parent_adev;
+	struct acpi_device *adev;
+
+	parent_adev = ACPI_COMPANION(pdev->dev.parent);
+	if (!parent_adev)
+		return;
+
+	/*
+	 * MFD child device gets its ACPI handle either from the ACPI
+	 * device directly under the parent that matches the acpi_pnpid or
+	 * it will use the parent handle if is no acpi_pnpid is given.
+	 */
+	adev = parent_adev;
+	if (cell->acpi_pnpid) {
+		struct acpi_device_id ids[2] = {};
+		struct acpi_device *child_adev;
+
+		strlcpy(ids[0].id, cell->acpi_pnpid, sizeof(ids[0].id));
+		list_for_each_entry(child_adev, &parent_adev->children, node)
+			if (acpi_match_device_ids(child_adev, ids)) {
+				adev = child_adev;
+				break;
+			}
+	}
+
+	ACPI_COMPANION_SET(&pdev->dev, adev);
+}
+#else
+static inline void mfd_acpi_add_device(const struct mfd_cell *cell,
+				       struct platform_device *pdev)
+{
+}
+#endif
+
 static int mfd_add_device(struct device *parent, int id,
 			  const struct mfd_cell *cell, atomic_t *usage_count,
 			  struct resource *mem_base,
@@ -101,6 +139,7 @@ static int mfd_add_device(struct device *parent, int id,
 	pdev->dev.type = &mfd_dev_type;
 	pdev->dev.dma_mask = parent->dma_mask;
 	pdev->dev.dma_parms = parent->dma_parms;
+	pdev->dev.coherent_dma_mask = parent->coherent_dma_mask;

 	ret = regulator_bulk_register_supply_alias(
 			&pdev->dev, cell->parent_supplies,
@@ -118,6 +157,8 @@ static int mfd_add_device(struct device *parent, int id,
 		}
 	}

+	mfd_acpi_add_device(cell, pdev);
+
 	if (cell->pdata_size) {
 		ret = platform_device_add_data(pdev,
 					cell->platform_data, cell->pdata_size);

--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -106,10 +106,7 @@ static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr,
 			} else
 				dump[n1] = pcf50633_reg_read(pcf, n + n1);

-		hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0);
-		buf1 += strlen(buf1);
-		*buf1++ = '\n';
-		*buf1 = '\0';
+		buf1 += sprintf(buf1, "%*ph\n", (int)sizeof(dump), dump);
 	}

 	return buf1 - buf;
@@ -195,8 +192,9 @@ static int pcf50633_probe(struct i2c_client *client,
 				const struct i2c_device_id *ids)
 {
 	struct pcf50633 *pcf;
+	struct platform_device *pdev;
 	struct pcf50633_platform_data *pdata = dev_get_platdata(&client->dev);
-	int i, ret;
+	int i, j, ret;
 	int version, variant;

 	if (!client->irq) {
@@ -243,9 +241,6 @@ static int pcf50633_probe(struct i2c_client *client,


 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
-		struct platform_device *pdev;
-		int j;
-
 		pdev = platform_device_alloc("pcf50633-regulator", i);
 		if (!pdev)
 			return -ENOMEM;
@@ -253,25 +248,31 @@ static int pcf50633_probe(struct i2c_client *client,
 		pdev->dev.parent = pcf->dev;
 		ret = platform_device_add_data(pdev, &pdata->reg_init_data[i],
 					       sizeof(pdata->reg_init_data[i]));
-		if (ret) {
-			platform_device_put(pdev);
-			for (j = 0; j < i; j++)
-				platform_device_put(pcf->regulator_pdev[j]);
-			return ret;
-		}
-		pcf->regulator_pdev[i] = pdev;
+		if (ret)
+			goto err;
+
+		ret = platform_device_add(pdev);
+		if (ret)
+			goto err;

-		platform_device_add(pdev);
+		pcf->regulator_pdev[i] = pdev;
 	}

 	ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
 	if (ret)
-		dev_err(pcf->dev, "error creating sysfs entries\n");
+		dev_warn(pcf->dev, "error creating sysfs entries\n");

 	if (pdata->probe_done)
 		pdata->probe_done(pcf);

 	return 0;
+
+err:
+	platform_device_put(pdev);
+	for (j = 0; j < i; j++)
+		platform_device_put(pcf->regulator_pdev[j]);
+
+	return ret;
 }

 static int pcf50633_remove(struct i2c_client *client)

--- a/drivers/mfd/qcom-spmi-pmic.c
+++ b/drivers/mfd/qcom-spmi-pmic.c
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spmi.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
+
+static const struct regmap_config spmi_regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= 8,
+	.max_register	= 0xffff,
+	.fast_io	= true,
+};
+
+static int pmic_spmi_probe(struct spmi_device *sdev)
+{
+	struct device_node *root = sdev->dev.of_node;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return of_platform_populate(root, NULL, NULL, &sdev->dev);
+}
+
+static void pmic_spmi_remove(struct spmi_device *sdev)
+{
+	of_platform_depopulate(&sdev->dev);
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+	{ .compatible = "qcom,spmi-pmic" },
+	{ .compatible = "qcom,pm8941" },
+	{ .compatible = "qcom,pm8841" },
+	{ .compatible = "qcom,pma8084" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver pmic_spmi_driver = {
+	.probe = pmic_spmi_probe,
+	.remove = pmic_spmi_remove,
+	.driver = {
+		.name = "pmic-spmi",
+		.of_match_table = pmic_spmi_id_table,
+	},
+};
+module_spmi_driver(pmic_spmi_driver);
+
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC driver");
+MODULE_ALIAS("spmi:spmi-pmic");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Josh Cartwright <joshc@codeaurora.org>");
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
+/*
+ * MFD core driver for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rk808.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+struct rk808_reg_data {
+	int addr;
+	int mask;
+	int value;
+};
+
+static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+	 *   bits are cleared in case when we shutoff anyway, but better safe.
+	 */
+
+	switch (reg) {
+	case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+	case RK808_RTC_STATUS_REG:
+	case RK808_VB_MON_REG:
+	case RK808_THERMAL_REG:
+	case RK808_DCDC_UV_STS_REG:
+	case RK808_LDO_UV_STS_REG:
+	case RK808_DCDC_PG_REG:
+	case RK808_LDO_PG_REG:
+	case RK808_DEVCTRL_REG:
+	case RK808_INT_STS_REG1:
+	case RK808_INT_STS_REG2:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config rk808_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK808_IO_POL_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start  = RK808_IRQ_RTC_ALARM,
+		.end    = RK808_IRQ_RTC_ALARM,
+		.flags  = IORESOURCE_IRQ,
+	}
+};
+
+static const struct mfd_cell rk808s[] = {
+	{ .name = "rk808-clkout", },
+	{ .name = "rk808-regulator", },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = &rtc_resources[0],
+	},
+};
+
+static const struct rk808_reg_data pre_init_reg[] = {
+	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
+	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
+	{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+	{ RK808_BUCK1_CONFIG_REG, BUCK1_RATE_MASK,  BUCK_ILMIN_200MA },
+	{ RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_200MA },
+	{ RK808_VB_MON_REG,       MASK_ALL,         VB_LO_ACT |
+						    VB_LO_SEL_3500MV },
+};
+
+static const struct regmap_irq rk808_irqs[] = {
+	/* INT_STS */
+	[RK808_IRQ_VOUT_LO] = {
+		.mask = RK808_IRQ_VOUT_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_VB_LO] = {
+		.mask = RK808_IRQ_VB_LO_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_PWRON] = {
+		.mask = RK808_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_PWRON_LP] = {
+		.mask = RK808_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_HOTDIE] = {
+		.mask = RK808_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_RTC_ALARM] = {
+		.mask = RK808_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK808_IRQ_RTC_PERIOD] = {
+		.mask = RK808_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+
+	/* INT_STS2 */
+	[RK808_IRQ_PLUG_IN_INT] = {
+		.mask = RK808_IRQ_PLUG_IN_INT_MSK,
+		.reg_offset = 1,
+	},
+	[RK808_IRQ_PLUG_OUT_INT] = {
+		.mask = RK808_IRQ_PLUG_OUT_INT_MSK,
+		.reg_offset = 1,
+	},
+};
+
+static struct regmap_irq_chip rk808_irq_chip = {
+	.name = "rk808",
+	.irqs = rk808_irqs,
+	.num_irqs = ARRAY_SIZE(rk808_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.status_base = RK808_INT_STS_REG1,
+	.mask_base = RK808_INT_STS_MSK_REG1,
+	.ack_base = RK808_INT_STS_REG1,
+	.init_ack_masked = true,
+};
+
+static struct i2c_client *rk808_i2c_client;
+static void rk808_device_shutdown(void)
+{
+	int ret;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	if (!rk808) {
+		dev_warn(&rk808_i2c_client->dev,
+			 "have no rk808, so do nothing here\n");
+		return;
+	}
+
+	ret = regmap_update_bits(rk808->regmap,
+				 RK808_DEVCTRL_REG,
+				 DEV_OFF_RST, DEV_OFF_RST);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
+static int rk808_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct rk808 *rk808;
+	int pm_off = 0;
+	int ret;
+	int i;
+
+	if (!client->irq) {
+		dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+		return -EINVAL;
+	}
+
+	rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
+	if (!rk808)
+		return -ENOMEM;
+
+	rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+	if (IS_ERR(rk808->regmap)) {
+		dev_err(&client->dev, "regmap initialization failed\n");
+		return PTR_ERR(rk808->regmap);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
+		ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
+					 pre_init_reg[i].mask,
+					 pre_init_reg[i].value);
+		if (ret) {
+			dev_err(&client->dev,
+				"0x%x write err\n", pre_init_reg[i].addr);
+			return ret;
+		}
+	}
+
+	ret = regmap_add_irq_chip(rk808->regmap, client->irq,
+				  IRQF_ONESHOT, -1,
+				  &rk808_irq_chip, &rk808->irq_data);
+	if (ret) {
+		dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
+		return ret;
+	}
+
+	rk808->i2c = client;
+	i2c_set_clientdata(client, rk808);
+
+	ret = mfd_add_devices(&client->dev, -1,
+			      rk808s, ARRAY_SIZE(rk808s),
+			      NULL, 0, regmap_irq_get_domain(rk808->irq_data));
+	if (ret) {
+		dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
+		goto err_irq;
+	}
+
+	pm_off = of_property_read_bool(np,
+				"rockchip,system-power-controller");
+	if (pm_off && !pm_power_off) {
+		rk808_i2c_client = client;
+		pm_power_off = rk808_device_shutdown;
+	}
+
+	return 0;
+
+err_irq:
+	regmap_del_irq_chip(client->irq, rk808->irq_data);
+	return ret;
+}
+
+static int rk808_remove(struct i2c_client *client)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(client->irq, rk808->irq_data);
+	mfd_remove_devices(&client->dev);
+	pm_power_off = NULL;
+
+	return 0;
+}
+
+static struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk808" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static const struct i2c_device_id rk808_ids[] = {
+	{ "rk808" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, rk808_ids);
+
+static struct i2c_driver rk808_i2c_driver = {
+	.driver = {
+		.name = "rk808",
+		.of_match_table = rk808_of_match,
+	},
+	.probe    = rk808_probe,
+	.remove   = rk808_remove,
+	.id_table = rk808_ids,
+};
+
+module_i2c_driver(rk808_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_DESCRIPTION("RK808 PMIC driver");
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
+/*
+ * MFD core driver for Ricoh RN5T618 PMIC
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell rn5t618_cells[] = {
+	{ .name = "rn5t618-regulator" },
+	{ .name = "rn5t618-wdt" },
+};
+
+static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RN5T618_WATCHDOGCNT:
+	case RN5T618_DCIRQ:
+	case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
+	case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
+	case RN5T618_IR_GPR:
+	case RN5T618_IR_GPF:
+	case RN5T618_MON_IOIN:
+	case RN5T618_INTMON:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config rn5t618_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.volatile_reg	= rn5t618_volatile_reg,
+	.max_register	= RN5T618_MAX_REG,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static struct rn5t618 *rn5t618_pm_power_off;
+
+static void rn5t618_power_off(void)
+{
+	/* disable automatic repower-on */
+	regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
+			   RN5T618_REPCNT_REPWRON, 0);
+	/* start power-off sequence */
+	regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
+			   RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
+}
+
+static int rn5t618_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct rn5t618 *priv;
+	int ret;
+
+	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, priv);
+
+	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
+			      ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+		return ret;
+	}
+
+	if (!pm_power_off) {
+		rn5t618_pm_power_off = priv;
+		pm_power_off = rn5t618_power_off;
+	}
+
+	return 0;
+}
+
+static int rn5t618_i2c_remove(struct i2c_client *i2c)
+{
+	struct rn5t618 *priv = i2c_get_clientdata(i2c);
+
+	if (priv == rn5t618_pm_power_off) {
+		rn5t618_pm_power_off = NULL;
+		pm_power_off = NULL;
+	}
+
+	mfd_remove_devices(&i2c->dev);
+	return 0;
+}
+
+static const struct of_device_id rn5t618_of_match[] = {
+	{ .compatible = "ricoh,rn5t618" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rn5t618_of_match);
+
+static const struct i2c_device_id rn5t618_i2c_id[] = {
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
+
+static struct i2c_driver rn5t618_i2c_driver = {
+	.driver = {
+		.name = "rn5t618",
+		.of_match_table = of_match_ptr(rn5t618_of_match),
+	},
+	.probe = rn5t618_i2c_probe,
+	.remove = rn5t618_i2c_remove,
+	.id_table = rn5t618_i2c_id,
+};
+
+module_i2c_driver(rn5t618_i2c_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("Ricoh RN5T618 MFD driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -1197,7 +1197,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 	pcr->msi_en = msi_en;
 	if (pcr->msi_en) {
 		ret = pci_enable_msi(pcidev);
-		if (ret < 0)
+		if (ret)
 			pcr->msi_en = false;
 	}


--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -684,7 +684,7 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
 	struct rtsx_ucr *ucr =
 		(struct rtsx_ucr *)usb_get_intfdata(intf);

-	dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
+	dev_dbg(&intf->dev, "%s called with pm message 0x%04x\n",
 			__func__, message.event);

 	/*

--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -514,9 +514,9 @@ unsigned long sm501_set_clock(struct device *dev,
 	unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
 	unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
 	unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
-	unsigned char reg;
 	unsigned int pll_reg = 0;
 	unsigned long sm501_freq; /* the actual frequency achieved */
+	u64 reg;

 	struct sm501_clock to;


--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -249,7 +249,7 @@ int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
 	int af_bits = variant->af_bits;
 	int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
 	int mask = (1 << af_bits) - 1;
-	u8 regs[numregs];
+	u8 regs[8];
 	int af, afperreg, ret;

 	if (!variant->get_altfunc)
@@ -854,7 +854,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 	struct stmpe_variant_info *variant = stmpe->variant;
 	int num = DIV_ROUND_UP(variant->num_irqs, 8);
 	u8 israddr;
-	u8 isr[num];
+	u8 isr[3];
 	int ret;
 	int i;

@@ -1122,7 +1122,12 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata,
 	if (pdata->id < 0)
 		pdata->id = -1;

-	pdata->irq_trigger = IRQF_TRIGGER_NONE;
+	pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
+				&pdata->irq_trigger);
+	if (gpio_is_valid(pdata->irq_gpio))
+		pdata->irq_over_gpio = 1;
+	else
+		pdata->irq_trigger = IRQF_TRIGGER_NONE;

 	of_property_read_u32(np, "st,autosleep-timeout",
 			&pdata->autosleep_timeout);

--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -53,11 +53,11 @@ void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tsadc, u32 val)
 	unsigned long flags;

 	spin_lock_irqsave(&tsadc->reg_lock, flags);
-	tsadc->reg_se_cache = val;
+	tsadc->reg_se_cache |= val;
 	if (tsadc->adc_waiting)
 		wake_up(&tsadc->reg_se_wait);
 	else if (!tsadc->adc_in_use)
-		tscadc_writel(tsadc, REG_SE, val);
+		tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);

 	spin_unlock_irqrestore(&tsadc->reg_lock, flags);
 }
@@ -96,6 +96,7 @@ static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tsadc)
 void am335x_tsc_se_set_once(struct ti_tscadc_dev *tsadc, u32 val)
 {
 	spin_lock_irq(&tsadc->reg_lock);
+	tsadc->reg_se_cache |= val;
 	am335x_tscadc_need_adc(tsadc);

 	tscadc_writel(tsadc, REG_SE, val);
@@ -241,18 +242,20 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	tscadc_writel(tscadc, REG_CLKDIV, tscadc->clk_div);

 	/* Set the control register bits */
-	ctrl = CNTRLREG_STEPCONFIGWRT |
-			CNTRLREG_STEPID;
-	if (tsc_wires > 0)
-		ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
+	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
 	tscadc_writel(tscadc, REG_CTRL, ctrl);

 	/* Set register bits for Idle Config Mode */
-	if (tsc_wires > 0)
+	if (tsc_wires > 0) {
+		tscadc->tsc_wires = tsc_wires;
+		if (tsc_wires == 5)
+			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
+		else
+			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
 		tscadc_idle_config(tscadc);
+	}

 	/* Enable the TSC module enable bit */
-	ctrl = tscadc_readl(tscadc, REG_CTRL);
 	ctrl |= CNTRLREG_TSCSSENB;
 	tscadc_writel(tscadc, REG_CTRL, ctrl);

@@ -324,21 +327,23 @@ static int tscadc_suspend(struct device *dev)
 static int tscadc_resume(struct device *dev)
 {
 	struct ti_tscadc_dev	*tscadc_dev = dev_get_drvdata(dev);
-	unsigned int restore, ctrl;
+	u32 ctrl;

 	pm_runtime_get_sync(dev);

 	/* context restore */
 	ctrl = CNTRLREG_STEPCONFIGWRT |	CNTRLREG_STEPID;
-	if (tscadc_dev->tsc_cell != -1)
-		ctrl |= CNTRLREG_TSCENB | CNTRLREG_4WIRE;
 	tscadc_writel(tscadc_dev, REG_CTRL, ctrl);

-	if (tscadc_dev->tsc_cell != -1)
+	if (tscadc_dev->tsc_cell != -1) {
+		if (tscadc_dev->tsc_wires == 5)
+			ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
+		else
+			ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
 		tscadc_idle_config(tscadc_dev);
-	restore = tscadc_readl(tscadc_dev, REG_CTRL);
-	tscadc_writel(tscadc_dev, REG_CTRL,
-			(restore | CNTRLREG_TSCSSENB));
+	}
+	ctrl |= CNTRLREG_TSCSSENB;
+	tscadc_writel(tscadc_dev, REG_CTRL, ctrl);

 	tscadc_writel(tscadc_dev, REG_CLKDIV, tscadc_dev->clk_div);


--- a/drivers/mfd/tps65217.c
+++ b/drivers/mfd/tps65217.c
@@ -146,6 +146,8 @@ EXPORT_SYMBOL_GPL(tps65217_clear_bits);
 static struct regmap_config tps65217_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+
+	.max_register = TPS65217_REG_MAX,
 };

 static const struct of_device_id tps65217_of_match[] = {

--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -486,6 +486,11 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
 	tps65910->i2c_client = i2c;
 	tps65910->id = chip_id;

+	/* Work around silicon erratum SWCZ010: the tps65910 may miss the
+	 * first I2C transfer. So issue a dummy transfer before the first
+	 * real transfer.
+	 */
+	i2c_master_send(i2c, "", 1);
 	tps65910->regmap = devm_regmap_init_i2c(i2c, &tps65910_regmap_config);
 	if (IS_ERR(tps65910->regmap)) {
 		ret = PTR_ERR(tps65910->regmap);

--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -396,13 +396,17 @@ static int twl4030_init_sih_modules(unsigned line)
 			status = twl_i2c_read(sih->module, rxbuf,
 				sih->mask[line].isr_offset, sih->bytes_ixr);
 			if (status < 0)
-				pr_err("twl4030: err %d initializing %s %s\n",
+				pr_warn("twl4030: err %d initializing %s %s\n",
 					status, sih->name, "ISR");

-			if (!sih->set_cor)
+			if (!sih->set_cor) {
 				status = twl_i2c_write(sih->module, buf,
 					sih->mask[line].isr_offset,
 					sih->bytes_ixr);
+				if (status < 0)
+					pr_warn("twl4030: write failed: %d\n",
+						status);
+			}
 			/*
 			 * else COR=1 means read sufficed.
 			 * (for most SIH modules...)

--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -627,6 +627,9 @@ static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
 	if (pdata && pdata->use_poweroff)
 		return true;

+	if (of_property_read_bool(node, "ti,system-power-controller"))
+		return true;
+
 	if (of_property_read_bool(node, "ti,use_poweroff"))
 		return true;


--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -679,6 +679,7 @@ static int twl6040_probe(struct i2c_client *client,
 	if (twl6040->rev < 0) {
 		dev_err(&client->dev, "Failed to read revision register: %d\n",
 			twl6040->rev);
+		ret = twl6040->rev;
 		goto gpio_err;
 	}


--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -87,6 +87,7 @@ int wm5102_patch(struct arizona *arizona)
 	case 0:
 		wm5102_patch = wm5102_reva_patch;
 		patch_size = ARRAY_SIZE(wm5102_reva_patch);
+		break;
 	default:
 		wm5102_patch = wm5102_revb_patch;
 		patch_size = ARRAY_SIZE(wm5102_revb_patch);
@@ -245,9 +246,6 @@ const struct regmap_irq_chip wm5102_irq = {
 static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000008, 0x0019 },   /* R8     - Ctrl IF SPI CFG 1 */ 
 	{ 0x00000009, 0x0001 },   /* R9     - Ctrl IF I2C1 CFG 1 */ 
-	{ 0x00000016, 0x0000 },   /* R22    - Write Sequencer Ctrl 0 */ 
-	{ 0x00000017, 0x0000 },   /* R23    - Write Sequencer Ctrl 1 */ 
-	{ 0x00000018, 0x0000 },   /* R24    - Write Sequencer Ctrl 2 */ 
 	{ 0x00000020, 0x0000 },   /* R32    - Tone Generator 1 */ 
 	{ 0x00000021, 0x1000 },   /* R33    - Tone Generator 2 */ 
 	{ 0x00000022, 0x0000 },   /* R34    - Tone Generator 3 */ 
@@ -1016,6 +1014,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
 	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
 	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_3:
 	case ARIZONA_WRITE_SEQUENCER_PROM:
 	case ARIZONA_TONE_GENERATOR_1:
 	case ARIZONA_TONE_GENERATOR_2:
@@ -1060,6 +1059,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASYNC_CLOCK_1:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
 	case ARIZONA_OUTPUT_SYSTEM_CLOCK:
 	case ARIZONA_OUTPUT_ASYNC_CLOCK:
 	case ARIZONA_RATE_ESTIMATOR_1:
@@ -1880,6 +1881,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_3:
 	case ARIZONA_OUTPUT_STATUS_1:
 	case ARIZONA_RAW_OUTPUT_STATUS_1:
 	case ARIZONA_SLIMBUS_RX_PORT_STATUS:
@@ -1889,8 +1894,13 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_SAMPLE_RATE_3_STATUS:
 	case ARIZONA_HAPTICS_STATUS:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
 	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL2_NCO_TEST_0:
+	case ARIZONA_DAC_COMP_1:
+	case ARIZONA_DAC_COMP_2:
+	case ARIZONA_DAC_COMP_3:
+	case ARIZONA_DAC_COMP_4:
 	case ARIZONA_FX_CTRL2:
 	case ARIZONA_INTERRUPT_STATUS_1:
 	case ARIZONA_INTERRUPT_STATUS_2:

--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -666,9 +666,6 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x0000000A, 0x0001 },    /* R10    - Ctrl IF I2C2 CFG 1 */
 	{ 0x0000000B, 0x0036 },    /* R11    - Ctrl IF I2C1 CFG 2 */
 	{ 0x0000000C, 0x0036 },    /* R12    - Ctrl IF I2C2 CFG 2 */
-	{ 0x00000016, 0x0000 },    /* R22    - Write Sequencer Ctrl 0 */
-	{ 0x00000017, 0x0000 },    /* R23    - Write Sequencer Ctrl 1 */
-	{ 0x00000018, 0x0000 },    /* R24    - Write Sequencer Ctrl 2 */
 	{ 0x00000020, 0x0000 },    /* R32    - Tone Generator 1 */
 	{ 0x00000021, 0x1000 },    /* R33    - Tone Generator 2 */
 	{ 0x00000022, 0x0000 },    /* R34    - Tone Generator 3 */
@@ -705,6 +702,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000104, 0x0011 },    /* R260   - Sample rate 3 */
 	{ 0x00000112, 0x0305 },    /* R274   - Async clock 1 */
 	{ 0x00000113, 0x0011 },    /* R275   - Async sample rate 1 */
+	{ 0x00000114, 0x0011 },    /* R276   - Async sample rate 2 */
 	{ 0x00000149, 0x0000 },    /* R329   - Output system clock */
 	{ 0x0000014A, 0x0000 },    /* R330   - Output async clock */
 	{ 0x00000152, 0x0000 },    /* R338   - Rate Estimator 1 */
@@ -1741,6 +1739,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASYNC_CLOCK_1:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
 	case ARIZONA_OUTPUT_SYSTEM_CLOCK:
 	case ARIZONA_OUTPUT_ASYNC_CLOCK:
 	case ARIZONA_RATE_ESTIMATOR_1:
@@ -2815,11 +2815,15 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
 	case ARIZONA_HAPTICS_STATUS:
 	case ARIZONA_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_SAMPLE_RATE_2_STATUS:
 	case ARIZONA_SAMPLE_RATE_3_STATUS:
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
+	case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
 	case ARIZONA_MIC_DETECT_3:
 	case ARIZONA_HEADPHONE_DETECT_2:
 	case ARIZONA_INPUT_ENABLES_STATUS:

--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -262,8 +262,10 @@ int wm8994_irq_init(struct wm8994 *wm8994)

 	return 0;
 }
+EXPORT_SYMBOL(wm8994_irq_init);

 void wm8994_irq_exit(struct wm8994 *wm8994)
 {
 	regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);
 }
+EXPORT_SYMBOL(wm8994_irq_exit);
--- a/drivers/mfd/wm8994-regmap.c
+++ b/drivers/mfd/wm8994-regmap.c
@@ -1252,6 +1252,7 @@ struct regmap_config wm1811_regmap_config = {
 	.volatile_reg = wm1811_volatile_register,
 	.readable_reg = wm1811_readable_register,
 };
+EXPORT_SYMBOL(wm1811_regmap_config);

 struct regmap_config wm8994_regmap_config = {
 	.reg_bits = 16,
@@ -1266,6 +1267,7 @@ struct regmap_config wm8994_regmap_config = {
 	.volatile_reg = wm8994_volatile_register,
 	.readable_reg = wm8994_readable_register,
 };
+EXPORT_SYMBOL(wm8994_regmap_config);

 struct regmap_config wm8958_regmap_config = {
 	.reg_bits = 16,
@@ -1280,8 +1282,10 @@ struct regmap_config wm8958_regmap_config = {
 	.volatile_reg = wm8958_volatile_register,
 	.readable_reg = wm8958_readable_register,
 };
+EXPORT_SYMBOL(wm8958_regmap_config);

 struct regmap_config wm8994_base_regmap_config = {
 	.reg_bits = 16,
 	.val_bits = 16,
 };
+EXPORT_SYMBOL(wm8994_base_regmap_config);
--- a/include/dt-bindings/clock/rockchip,rk808.h
+++ b/include/dt-bindings/clock/rockchip,rk808.h
+/*
+ * This header provides constants clk index RK808 pmic clkout
+ */
+#ifndef _CLK_ROCKCHIP_RK808
+#define _CLK_ROCKCHIP_RK808
+
+/* CLOCKOUT index */
+#define RK808_CLKOUT0		0
+#define RK808_CLKOUT1		1
+
+#endif
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -27,6 +27,7 @@
 #define ARIZONA_WRITE_SEQUENCER_CTRL_0           0x16
 #define ARIZONA_WRITE_SEQUENCER_CTRL_1           0x17
 #define ARIZONA_WRITE_SEQUENCER_CTRL_2           0x18
+#define ARIZONA_WRITE_SEQUENCER_CTRL_3           0x19
 #define ARIZONA_WRITE_SEQUENCER_PROM             0x1A
 #define ARIZONA_TONE_GENERATOR_1                 0x20
 #define ARIZONA_TONE_GENERATOR_2                 0x21
@@ -70,7 +71,9 @@
 #define ARIZONA_SAMPLE_RATE_3_STATUS             0x10C
 #define ARIZONA_ASYNC_CLOCK_1                    0x112
 #define ARIZONA_ASYNC_SAMPLE_RATE_1              0x113
+#define ARIZONA_ASYNC_SAMPLE_RATE_2              0x114
 #define ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS       0x11B
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS       0x11C
 #define ARIZONA_OUTPUT_SYSTEM_CLOCK              0x149
 #define ARIZONA_OUTPUT_ASYNC_CLOCK               0x14A
 #define ARIZONA_RATE_ESTIMATOR_1                 0x152
@@ -1664,16 +1667,30 @@
 /*
 * R275 (0x113) - Async sample rate 1
 */
-#define ARIZONA_ASYNC_SAMPLE_RATE_MASK           0x001F  /* ASYNC_SAMPLE_RATE - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_SHIFT               0  /* ASYNC_SAMPLE_RATE - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_WIDTH               5  /* ASYNC_SAMPLE_RATE - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_MASK         0x001F  /* ASYNC_SAMPLE_RATE_1 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_SHIFT             0  /* ASYNC_SAMPLE_RATE_1 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_WIDTH             5  /* ASYNC_SAMPLE_RATE_1 - [4:0] */
+
+/*
+ * R276 (0x114) - Async sample rate 2
+ */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_MASK         0x001F  /* ASYNC_SAMPLE_RATE_2 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_SHIFT             0  /* ASYNC_SAMPLE_RATE_2 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_WIDTH             5  /* ASYNC_SAMPLE_RATE_2 - [4:0] */

 /*
 * R283 (0x11B) - Async sample rate 1 status
 */
-#define ARIZONA_ASYNC_SAMPLE_RATE_STS_MASK       0x001F  /* ASYNC_SAMPLE_RATE_STS - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_STS_SHIFT           0  /* ASYNC_SAMPLE_RATE_STS - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_STS_WIDTH           5  /* ASYNC_SAMPLE_RATE_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_STS_MASK     0x001F  /* ASYNC_SAMPLE_RATE_1_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_STS_SHIFT         0  /* ASYNC_SAMPLE_RATE_1_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_STS_WIDTH         5  /* ASYNC_SAMPLE_RATE_1_STS - [4:0] */
+
+/*
+ * R284 (0x11C) - Async sample rate 2 status
+ */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STS_MASK     0x001F  /* ASYNC_SAMPLE_RATE_2_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STS_SHIFT         0  /* ASYNC_SAMPLE_RATE_2_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STS_WIDTH         5  /* ASYNC_SAMPLE_RATE_2_STS - [4:0] */

 /*
 * R329 (0x149) - Output system clock

--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -44,6 +44,9 @@ struct mfd_cell {
 	 */
 	const char		*of_compatible;

+	/* Matches ACPI PNP id, either _HID or _CID */
+	const char		*acpi_pnpid;
+
 	/*
 	 * These resources can be specified relative to the parent device.
 	 * For accessing hardware you should use resources from the platform dev

--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -62,10 +62,6 @@ struct cros_ec_command {
 * @dev: Device pointer
 * @was_wake_device: true if this device was set to wake the system from
 * sleep at the last suspend
- * @cmd_xfer: send command to EC and get response
- *     Returns the number of bytes received if the communication succeeded, but
- *     that doesn't mean the EC was happy with the command. The caller
- *     should check msg.result for the EC's result code.
 *
 * @priv: Private data
 * @irq: Interrupt to use
@@ -82,6 +78,10 @@ struct cros_ec_command {
 * @dout_size: size of dout buffer to allocate (zero to use static dout)
 * @parent: pointer to parent device (e.g. i2c or spi device)
 * @wake_enabled: true if this device can wake the system from sleep
+ * @cmd_xfer: send command to EC and get response
+ *     Returns the number of bytes received if the communication succeeded, but
+ *     that doesn't mean the EC was happy with the command. The caller
+ *     should check msg.result for the EC's result code.
 * @lock: one transaction at a time
 */
 struct cros_ec_device {
@@ -92,8 +92,6 @@ struct cros_ec_device {
 	struct device *dev;
 	bool was_wake_device;
 	struct class *cros_class;
-	int (*cmd_xfer)(struct cros_ec_device *ec,
-			struct cros_ec_command *msg);

 	/* These are used to implement the platform-specific interface */
 	void *priv;
@@ -104,6 +102,8 @@ struct cros_ec_device {
 	int dout_size;
 	struct device *parent;
 	bool wake_enabled;
+	int (*cmd_xfer)(struct cros_ec_device *ec,
+			struct cros_ec_command *msg);
 	struct mutex lock;
 };

@@ -152,6 +152,18 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
 int cros_ec_check_result(struct cros_ec_device *ec_dev,
 			 struct cros_ec_command *msg);

+/**
+ * cros_ec_cmd_xfer - Send a command to the ChromeOS EC
+ *
+ * Call this to send a command to the ChromeOS EC.  This should be used
+ * instead of calling the EC's cmd_xfer() callback directly.
+ *
+ * @ec_dev: EC device
+ * @msg: Message to write
+ */
+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+		     struct cros_ec_command *msg);
+
 /**
 * cros_ec_remove - Remove a ChromeOS EC
 *

--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -211,7 +211,7 @@ static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg,
 int da9052_device_init(struct da9052 *da9052, u8 chip_id);
 void da9052_device_exit(struct da9052 *da9052);

-extern struct regmap_config da9052_regmap_config;
+extern const struct regmap_config da9052_regmap_config;

 int da9052_irq_init(struct da9052 *da9052);
 int da9052_irq_exit(struct da9052 *da9052);

--- a/include/linux/mfd/davinci_voicecodec.h
+++ b/include/linux/mfd/davinci_voicecodec.h
@@ -21,7 +21,7 @@
 */

 #ifndef __LINUX_MFD_DAVINCI_VOICECODEC_H_
-#define __LINUX_MFD_DAVINIC_VOICECODEC_H_
+#define __LINUX_MFD_DAVINCI_VOICECODEC_H_

 #include <linux/kernel.h>
 #include <linux/platform_device.h>

--- a/include/linux/mfd/hi6421-pmic.h
+++ b/include/linux/mfd/hi6421-pmic.h
+/*
+ * Header file for device driver Hi6421 PMIC
+ *
+ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
+ *              http://www.hisilicon.com
+ * Copyright (c) <2013-2014> Linaro Ltd.
+ *              http://www.linaro.org
+ *
+ * Author: Guodong Xu <guodong.xu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef	__HI6421_PMIC_H
+#define	__HI6421_PMIC_H
+
+/* Hi6421 registers are mapped to memory bus in 4 bytes stride */
+#define HI6421_REG_TO_BUS_ADDR(x)	(x << 2)
+
+/* Hi6421 maximum register number */
+#define HI6421_REG_MAX			0xFF
+
+/* Hi6421 OCP (over current protection) and DEB (debounce) control register */
+#define	HI6421_OCP_DEB_CTRL_REG		HI6421_REG_TO_BUS_ADDR(0x51)
+#define	HI6421_OCP_DEB_SEL_MASK		0x0C
+#define HI6421_OCP_DEB_SEL_8MS		0x00
+#define HI6421_OCP_DEB_SEL_16MS		0x04
+#define HI6421_OCP_DEB_SEL_32MS		0x08
+#define HI6421_OCP_DEB_SEL_64MS		0x0C
+#define HI6421_OCP_EN_DEBOUNCE_MASK	0x02
+#define HI6421_OCP_EN_DEBOUNCE_ENABLE	0x02
+#define HI6421_OCP_AUTO_STOP_MASK	0x01
+#define HI6421_OCP_AUTO_STOP_ENABLE	0x01
+
+struct hi6421_pmic {
+	struct regmap		*regmap;
+};
+
+#endif		/* __HI6421_PMIC_H */
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -46,7 +46,7 @@ enum max77693_pmic_reg {
 	MAX77693_LED_REG_VOUT_FLASH2			= 0x0C,
 	MAX77693_LED_REG_FLASH_INT			= 0x0E,
 	MAX77693_LED_REG_FLASH_INT_MASK			= 0x0F,
-	MAX77693_LED_REG_FLASH_INT_STATUS		= 0x10,
+	MAX77693_LED_REG_FLASH_STATUS			= 0x10,

 	MAX77693_PMIC_REG_PMIC_ID1			= 0x20,
 	MAX77693_PMIC_REG_PMIC_ID2			= 0x21,
@@ -85,6 +85,65 @@ enum max77693_pmic_reg {
 	MAX77693_PMIC_REG_END,
 };

+/* MAX77693 ITORCH register */
+#define TORCH_IOUT1_SHIFT	0
+#define TORCH_IOUT2_SHIFT	4
+#define TORCH_IOUT_MIN		15625
+#define TORCH_IOUT_MAX		250000
+#define TORCH_IOUT_STEP		15625
+
+/* MAX77693 IFLASH1 and IFLASH2 registers */
+#define FLASH_IOUT_MIN		15625
+#define FLASH_IOUT_MAX_1LED	1000000
+#define FLASH_IOUT_MAX_2LEDS	625000
+#define FLASH_IOUT_STEP		15625
+
+/* MAX77693 TORCH_TIMER register */
+#define TORCH_TMR_NO_TIMER	0x40
+#define TORCH_TIMEOUT_MIN	262000
+#define TORCH_TIMEOUT_MAX	15728000
+
+/* MAX77693 FLASH_TIMER register */
+#define FLASH_TMR_LEVEL		0x80
+#define FLASH_TIMEOUT_MIN	62500
+#define FLASH_TIMEOUT_MAX	1000000
+#define FLASH_TIMEOUT_STEP	62500
+
+/* MAX77693 FLASH_EN register */
+#define FLASH_EN_OFF		0x0
+#define FLASH_EN_FLASH		0x1
+#define FLASH_EN_TORCH		0x2
+#define FLASH_EN_ON		0x3
+#define FLASH_EN_SHIFT(x)	(6 - ((x) - 1) * 2)
+#define TORCH_EN_SHIFT(x)	(2 - ((x) - 1) * 2)
+
+/* MAX77693 MAX_FLASH1 register */
+#define MAX_FLASH1_MAX_FL_EN	0x80
+#define MAX_FLASH1_VSYS_MIN	2400
+#define MAX_FLASH1_VSYS_MAX	3400
+#define MAX_FLASH1_VSYS_STEP	33
+
+/* MAX77693 VOUT_CNTL register */
+#define FLASH_BOOST_FIXED	0x04
+#define FLASH_BOOST_LEDNUM_2	0x80
+
+/* MAX77693 VOUT_FLASH1 register */
+#define FLASH_VOUT_MIN		3300
+#define FLASH_VOUT_MAX		5500
+#define FLASH_VOUT_STEP		25
+#define FLASH_VOUT_RMIN		0x0c
+
+/* MAX77693 FLASH_STATUS register */
+#define FLASH_STATUS_FLASH_ON	BIT(3)
+#define FLASH_STATUS_TORCH_ON	BIT(2)
+
+/* MAX77693 FLASH_INT register */
+#define FLASH_INT_FLED2_OPEN	BIT(0)
+#define FLASH_INT_FLED2_SHORT	BIT(1)
+#define FLASH_INT_FLED1_OPEN	BIT(2)
+#define FLASH_INT_FLED1_SHORT	BIT(3)
+#define FLASH_INT_OVER_CURRENT	BIT(4)
+
 /* MAX77693 CHG_CNFG_00 register */
 #define CHG_CNFG_00_CHG_MASK		0x1
 #define CHG_CNFG_00_BUCK_MASK		0x4

--- a/include/linux/mfd/max77693.h
+++ b/include/linux/mfd/max77693.h
@@ -63,6 +63,45 @@ struct max77693_muic_platform_data {
 	int path_uart;
 };

+/* MAX77693 led flash */
+
+/* triggers */
+enum max77693_led_trigger {
+	MAX77693_LED_TRIG_OFF,
+	MAX77693_LED_TRIG_FLASH,
+	MAX77693_LED_TRIG_TORCH,
+	MAX77693_LED_TRIG_EXT,
+	MAX77693_LED_TRIG_SOFT,
+};
+
+/* trigger types */
+enum max77693_led_trigger_type {
+	MAX77693_LED_TRIG_TYPE_EDGE,
+	MAX77693_LED_TRIG_TYPE_LEVEL,
+};
+
+/* boost modes */
+enum max77693_led_boost_mode {
+	MAX77693_LED_BOOST_NONE,
+	MAX77693_LED_BOOST_ADAPTIVE,
+	MAX77693_LED_BOOST_FIXED,
+};
+
+struct max77693_led_platform_data {
+	u32 fleds[2];
+	u32 iout_torch[2];
+	u32 iout_flash[2];
+	u32 trigger[2];
+	u32 trigger_type[2];
+	u32 num_leds;
+	u32 boost_mode;
+	u32 flash_timeout;
+	u32 boost_vout;
+	u32 low_vsys;
+};
+
+/* MAX77693 */
+
 struct max77693_platform_data {
 	/* regulator data */
 	struct max77693_regulator_data *regulators;
@@ -70,5 +109,6 @@ struct max77693_platform_data {

 	/* muic data */
 	struct max77693_muic_platform_data *muic_data;
+	struct max77693_led_platform_data *led_data;
 };
 #endif	/* __LINUX_MFD_MAX77693_H */
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
+/*
+ * rk808.h for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __LINUX_REGULATOR_rk808_H
+#define __LINUX_REGULATOR_rk808_H
+
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+
+/*
+ * rk808 Global Register Map.
+ */
+
+#define RK808_DCDC1	0 /* (0+RK808_START) */
+#define RK808_LDO1	4 /* (4+RK808_START) */
+#define RK808_NUM_REGULATORS   14
+
+enum rk808_reg {
+	RK808_ID_DCDC1,
+	RK808_ID_DCDC2,
+	RK808_ID_DCDC3,
+	RK808_ID_DCDC4,
+	RK808_ID_LDO1,
+	RK808_ID_LDO2,
+	RK808_ID_LDO3,
+	RK808_ID_LDO4,
+	RK808_ID_LDO5,
+	RK808_ID_LDO6,
+	RK808_ID_LDO7,
+	RK808_ID_LDO8,
+	RK808_ID_SWITCH1,
+	RK808_ID_SWITCH2,
+};
+
+#define RK808_SECONDS_REG	0x00
+#define RK808_MINUTES_REG	0x01
+#define RK808_HOURS_REG		0x02
+#define RK808_DAYS_REG		0x03
+#define RK808_MONTHS_REG	0x04
+#define RK808_YEARS_REG		0x05
+#define RK808_WEEKS_REG		0x06
+#define RK808_ALARM_SECONDS_REG	0x08
+#define RK808_ALARM_MINUTES_REG	0x09
+#define RK808_ALARM_HOURS_REG	0x0a
+#define RK808_ALARM_DAYS_REG	0x0b
+#define RK808_ALARM_MONTHS_REG	0x0c
+#define RK808_ALARM_YEARS_REG	0x0d
+#define RK808_RTC_CTRL_REG	0x10
+#define RK808_RTC_STATUS_REG	0x11
+#define RK808_RTC_INT_REG	0x12
+#define RK808_RTC_COMP_LSB_REG	0x13
+#define RK808_RTC_COMP_MSB_REG	0x14
+#define RK808_CLK32OUT_REG	0x20
+#define RK808_VB_MON_REG	0x21
+#define RK808_THERMAL_REG	0x22
+#define RK808_DCDC_EN_REG	0x23
+#define RK808_LDO_EN_REG	0x24
+#define RK808_SLEEP_SET_OFF_REG1	0x25
+#define RK808_SLEEP_SET_OFF_REG2	0x26
+#define RK808_DCDC_UV_STS_REG	0x27
+#define RK808_DCDC_UV_ACT_REG	0x28
+#define RK808_LDO_UV_STS_REG	0x29
+#define RK808_LDO_UV_ACT_REG	0x2a
+#define RK808_DCDC_PG_REG	0x2b
+#define RK808_LDO_PG_REG	0x2c
+#define RK808_VOUT_MON_TDB_REG	0x2d
+#define RK808_BUCK1_CONFIG_REG		0x2e
+#define RK808_BUCK1_ON_VSEL_REG		0x2f
+#define RK808_BUCK1_SLP_VSEL_REG	0x30
+#define RK808_BUCK1_DVS_VSEL_REG	0x31
+#define RK808_BUCK2_CONFIG_REG		0x32
+#define RK808_BUCK2_ON_VSEL_REG		0x33
+#define RK808_BUCK2_SLP_VSEL_REG	0x34
+#define RK808_BUCK2_DVS_VSEL_REG	0x35
+#define RK808_BUCK3_CONFIG_REG		0x36
+#define RK808_BUCK4_CONFIG_REG		0x37
+#define RK808_BUCK4_ON_VSEL_REG		0x38
+#define RK808_BUCK4_SLP_VSEL_REG	0x39
+#define RK808_BOOST_CONFIG_REG		0x3a
+#define RK808_LDO1_ON_VSEL_REG		0x3b
+#define RK808_LDO1_SLP_VSEL_REG		0x3c
+#define RK808_LDO2_ON_VSEL_REG		0x3d
+#define RK808_LDO2_SLP_VSEL_REG		0x3e
+#define RK808_LDO3_ON_VSEL_REG		0x3f
+#define RK808_LDO3_SLP_VSEL_REG		0x40
+#define RK808_LDO4_ON_VSEL_REG		0x41
+#define RK808_LDO4_SLP_VSEL_REG		0x42
+#define RK808_LDO5_ON_VSEL_REG		0x43
+#define RK808_LDO5_SLP_VSEL_REG		0x44
+#define RK808_LDO6_ON_VSEL_REG		0x45
+#define RK808_LDO6_SLP_VSEL_REG		0x46
+#define RK808_LDO7_ON_VSEL_REG		0x47
+#define RK808_LDO7_SLP_VSEL_REG		0x48
+#define RK808_LDO8_ON_VSEL_REG		0x49
+#define RK808_LDO8_SLP_VSEL_REG		0x4a
+#define RK808_DEVCTRL_REG	0x4b
+#define RK808_INT_STS_REG1	0x4c
+#define RK808_INT_STS_MSK_REG1	0x4d
+#define RK808_INT_STS_REG2	0x4e
+#define RK808_INT_STS_MSK_REG2	0x4f
+#define RK808_IO_POL_REG	0x50
+
+/* IRQ Definitions */
+#define RK808_IRQ_VOUT_LO	0
+#define RK808_IRQ_VB_LO		1
+#define RK808_IRQ_PWRON		2
+#define RK808_IRQ_PWRON_LP	3
+#define RK808_IRQ_HOTDIE	4
+#define RK808_IRQ_RTC_ALARM	5
+#define RK808_IRQ_RTC_PERIOD	6
+#define RK808_IRQ_PLUG_IN_INT	7
+#define RK808_IRQ_PLUG_OUT_INT	8
+#define RK808_NUM_IRQ		9
+
+#define RK808_IRQ_VOUT_LO_MSK		BIT(0)
+#define RK808_IRQ_VB_LO_MSK		BIT(1)
+#define RK808_IRQ_PWRON_MSK		BIT(2)
+#define RK808_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK808_IRQ_HOTDIE_MSK		BIT(4)
+#define RK808_IRQ_RTC_ALARM_MSK		BIT(5)
+#define RK808_IRQ_RTC_PERIOD_MSK	BIT(6)
+#define RK808_IRQ_PLUG_IN_INT_MSK	BIT(0)
+#define RK808_IRQ_PLUG_OUT_INT_MSK	BIT(1)
+
+#define RK808_VBAT_LOW_2V8	0x00
+#define RK808_VBAT_LOW_2V9	0x01
+#define RK808_VBAT_LOW_3V0	0x02
+#define RK808_VBAT_LOW_3V1	0x03
+#define RK808_VBAT_LOW_3V2	0x04
+#define RK808_VBAT_LOW_3V3	0x05
+#define RK808_VBAT_LOW_3V4	0x06
+#define RK808_VBAT_LOW_3V5	0x07
+#define VBAT_LOW_VOL_MASK	(0x07 << 0)
+#define EN_VABT_LOW_SHUT_DOWN	(0x00 << 4)
+#define EN_VBAT_LOW_IRQ		(0x1 << 4)
+#define VBAT_LOW_ACT_MASK	(0x1 << 4)
+
+#define BUCK_ILMIN_MASK		(7 << 0)
+#define BOOST_ILMIN_MASK	(7 << 0)
+#define BUCK1_RATE_MASK		(3 << 3)
+#define BUCK2_RATE_MASK		(3 << 3)
+#define MASK_ALL	0xff
+
+#define SWITCH2_EN	BIT(6)
+#define SWITCH1_EN	BIT(5)
+#define DEV_OFF_RST	BIT(3)
+
+#define VB_LO_ACT		BIT(4)
+#define VB_LO_SEL_3500MV	(7 << 0)
+
+#define VOUT_LO_INT	BIT(0)
+#define CLK32KOUT2_EN	BIT(0)
+
+enum {
+	BUCK_ILMIN_50MA,
+	BUCK_ILMIN_100MA,
+	BUCK_ILMIN_150MA,
+	BUCK_ILMIN_200MA,
+	BUCK_ILMIN_250MA,
+	BUCK_ILMIN_300MA,
+	BUCK_ILMIN_350MA,
+	BUCK_ILMIN_400MA,
+};
+
+enum {
+	BOOST_ILMIN_75MA,
+	BOOST_ILMIN_100MA,
+	BOOST_ILMIN_125MA,
+	BOOST_ILMIN_150MA,
+	BOOST_ILMIN_175MA,
+	BOOST_ILMIN_200MA,
+	BOOST_ILMIN_225MA,
+	BOOST_ILMIN_250MA,
+};
+
+struct rk808 {
+	struct i2c_client *i2c;
+	struct regmap_irq_chip_data *irq_data;
+	struct regmap *regmap;
+};
+#endif /* __LINUX_REGULATOR_rk808_H */
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
+/*
+ * MFD core driver for Ricoh RN5T618 PMIC
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_MFD_RN5T618_H
+#define __LINUX_MFD_RN5T618_H
+
+#include <linux/regmap.h>
+
+#define RN5T618_LSIVER			0x00
+#define RN5T618_OTPVER			0x01
+#define RN5T618_IODAC			0x02
+#define RN5T618_VINDAC			0x03
+#define RN5T618_CPUCNT			0x06
+#define RN5T618_PSWR			0x07
+#define RN5T618_PONHIS			0x09
+#define RN5T618_POFFHIS			0x0a
+#define RN5T618_WATCHDOG		0x0b
+#define RN5T618_WATCHDOGCNT		0x0c
+#define RN5T618_PWRFUNC			0x0d
+#define RN5T618_SLPCNT			0x0e
+#define RN5T618_REPCNT			0x0f
+#define RN5T618_PWRONTIMSET		0x10
+#define RN5T618_NOETIMSETCNT		0x11
+#define RN5T618_PWRIREN			0x12
+#define RN5T618_PWRIRQ			0x13
+#define RN5T618_PWRMON			0x14
+#define RN5T618_PWRIRSEL		0x15
+#define RN5T618_DC1_SLOT		0x16
+#define RN5T618_DC2_SLOT		0x17
+#define RN5T618_DC3_SLOT		0x18
+#define RN5T618_LDO1_SLOT		0x1b
+#define RN5T618_LDO2_SLOT		0x1c
+#define RN5T618_LDO3_SLOT		0x1d
+#define RN5T618_LDO4_SLOT		0x1e
+#define RN5T618_LDO5_SLOT		0x1f
+#define RN5T618_PSO0_SLOT		0x25
+#define RN5T618_PSO1_SLOT		0x26
+#define RN5T618_PSO2_SLOT		0x27
+#define RN5T618_PSO3_SLOT		0x28
+#define RN5T618_LDORTC1_SLOT		0x2a
+#define RN5T618_DC1CTL			0x2c
+#define RN5T618_DC1CTL2			0x2d
+#define RN5T618_DC2CTL			0x2e
+#define RN5T618_DC2CTL2			0x2f
+#define RN5T618_DC3CTL			0x30
+#define RN5T618_DC3CTL2			0x31
+#define RN5T618_DC1DAC			0x36
+#define RN5T618_DC2DAC			0x37
+#define RN5T618_DC3DAC			0x38
+#define RN5T618_DC1DAC_SLP		0x3b
+#define RN5T618_DC2DAC_SLP		0x3c
+#define RN5T618_DC3DAC_SLP		0x3d
+#define RN5T618_DCIREN			0x40
+#define RN5T618_DCIRQ			0x41
+#define RN5T618_DCIRMON			0x42
+#define RN5T618_LDOEN1			0x44
+#define RN5T618_LDOEN2			0x45
+#define RN5T618_LDODIS			0x46
+#define RN5T618_LDO1DAC			0x4c
+#define RN5T618_LDO2DAC			0x4d
+#define RN5T618_LDO3DAC			0x4e
+#define RN5T618_LDO4DAC			0x4f
+#define RN5T618_LDO5DAC			0x50
+#define RN5T618_LDORTCDAC		0x56
+#define RN5T618_LDORTC2DAC		0x57
+#define RN5T618_LDO1DAC_SLP		0x58
+#define RN5T618_LDO2DAC_SLP		0x59
+#define RN5T618_LDO3DAC_SLP		0x5a
+#define RN5T618_LDO4DAC_SLP		0x5b
+#define RN5T618_LDO5DAC_SLP		0x5c
+#define RN5T618_ADCCNT1			0x64
+#define RN5T618_ADCCNT2			0x65
+#define RN5T618_ADCCNT3			0x66
+#define RN5T618_ILIMDATAH		0x68
+#define RN5T618_ILIMDATAL		0x69
+#define RN5T618_VBATDATAH		0x6a
+#define RN5T618_VBATDATAL		0x6b
+#define RN5T618_VADPDATAH		0x6c
+#define RN5T618_VADPDATAL		0x6d
+#define RN5T618_VUSBDATAH		0x6e
+#define RN5T618_VUSBDATAL		0x6f
+#define RN5T618_VSYSDATAH		0x70
+#define RN5T618_VSYSDATAL		0x71
+#define RN5T618_VTHMDATAH		0x72
+#define RN5T618_VTHMDATAL		0x73
+#define RN5T618_AIN1DATAH		0x74
+#define RN5T618_AIN1DATAL		0x75
+#define RN5T618_AIN0DATAH		0x76
+#define RN5T618_AIN0DATAL		0x77
+#define RN5T618_ILIMTHL			0x78
+#define RN5T618_ILIMTHH			0x79
+#define RN5T618_VBATTHL			0x7a
+#define RN5T618_VBATTHH			0x7b
+#define RN5T618_VADPTHL			0x7c
+#define RN5T618_VADPTHH			0x7d
+#define RN5T618_VUSBTHL			0x7e
+#define RN5T618_VUSBTHH			0x7f
+#define RN5T618_VSYSTHL			0x80
+#define RN5T618_VSYSTHH			0x81
+#define RN5T618_VTHMTHL			0x82
+#define RN5T618_VTHMTHH			0x83
+#define RN5T618_AIN1THL			0x84
+#define RN5T618_AIN1THH			0x85
+#define RN5T618_AIN0THL			0x86
+#define RN5T618_AIN0THH			0x87
+#define RN5T618_EN_ADCIR1		0x88
+#define RN5T618_EN_ADCIR2		0x89
+#define RN5T618_EN_ADCIR3		0x8a
+#define RN5T618_IR_ADC1			0x8c
+#define RN5T618_IR_ADC2			0x8d
+#define RN5T618_IR_ADC3			0x8e
+#define RN5T618_IOSEL			0x90
+#define RN5T618_IOOUT			0x91
+#define RN5T618_GPEDGE1			0x92
+#define RN5T618_GPEDGE2			0x93
+#define RN5T618_EN_GPIR			0x94
+#define RN5T618_IR_GPR			0x95
+#define RN5T618_IR_GPF			0x96
+#define RN5T618_MON_IOIN		0x97
+#define RN5T618_GPLED_FUNC		0x98
+#define RN5T618_INTPOL			0x9c
+#define RN5T618_INTEN			0x9d
+#define RN5T618_INTMON			0x9e
+#define RN5T618_PREVINDAC		0xb0
+#define RN5T618_BATDAC			0xb1
+#define RN5T618_CHGCTL1			0xb3
+#define RN5T618_CHGCTL2			0xb4
+#define RN5T618_VSYSSET			0xb5
+#define RN5T618_REGISET1		0xb6
+#define RN5T618_REGISET2		0xb7
+#define RN5T618_CHGISET			0xb8
+#define RN5T618_TIMSET			0xb9
+#define RN5T618_BATSET1			0xba
+#define RN5T618_BATSET2			0xbb
+#define RN5T618_DIESET			0xbc
+#define RN5T618_CHGSTATE		0xbd
+#define RN5T618_CHGCTRL_IRFMASK		0xbe
+#define RN5T618_CHGSTAT_IRFMASK1	0xbf
+#define RN5T618_CHGSTAT_IRFMASK2	0xc0
+#define RN5T618_CHGERR_IRFMASK		0xc1
+#define RN5T618_CHGCTRL_IRR		0xc2
+#define RN5T618_CHGSTAT_IRR1		0xc3
+#define RN5T618_CHGSTAT_IRR2		0xc4
+#define RN5T618_CHGERR_IRR		0xc5
+#define RN5T618_CHGCTRL_MONI		0xc6
+#define RN5T618_CHGSTAT_MONI1		0xc7
+#define RN5T618_CHGSTAT_MONI2		0xc8
+#define RN5T618_CHGERR_MONI		0xc9
+#define RN5T618_CHGCTRL_DETMOD1		0xca
+#define RN5T618_CHGCTRL_DETMOD2		0xcb
+#define RN5T618_CHGSTAT_DETMOD1		0xcc
+#define RN5T618_CHGSTAT_DETMOD2		0xcd
+#define RN5T618_CHGSTAT_DETMOD3		0xce
+#define RN5T618_CHGERR_DETMOD1		0xcf
+#define RN5T618_CHGERR_DETMOD2		0xd0
+#define RN5T618_CHGOSCCTL		0xd4
+#define RN5T618_CHGOSCSCORESET1		0xd5
+#define RN5T618_CHGOSCSCORESET2		0xd6
+#define RN5T618_CHGOSCSCORESET3		0xd7
+#define RN5T618_CHGOSCFREQSET1		0xd8
+#define RN5T618_CHGOSCFREQSET2		0xd9
+#define RN5T618_CONTROL			0xe0
+#define RN5T618_SOC			0xe1
+#define RN5T618_RE_CAP_H		0xe2
+#define RN5T618_RE_CAP_L		0xe3
+#define RN5T618_FA_CAP_H		0xe4
+#define RN5T618_FA_CAP_L		0xe5
+#define RN5T618_AGE			0xe6
+#define RN5T618_TT_EMPTY_H		0xe7
+#define RN5T618_TT_EMPTY_L		0xe8
+#define RN5T618_TT_FULL_H		0xe9
+#define RN5T618_TT_FULL_L		0xea
+#define RN5T618_VOLTAGE_1		0xeb
+#define RN5T618_VOLTAGE_0		0xec
+#define RN5T618_TEMP_1			0xed
+#define RN5T618_TEMP_0			0xee
+#define RN5T618_CC_CTRL			0xef
+#define RN5T618_CC_COUNT2		0xf0
+#define RN5T618_CC_COUNT1		0xf1
+#define RN5T618_CC_COUNT0		0xf2
+#define RN5T618_CC_SUMREG3		0xf3
+#define RN5T618_CC_SUMREG2		0xf4
+#define RN5T618_CC_SUMREG1		0xf5
+#define RN5T618_CC_SUMREG0		0xf6
+#define RN5T618_CC_OFFREG1		0xf7
+#define RN5T618_CC_OFFREG0		0xf8
+#define RN5T618_CC_GAINREG1		0xf9
+#define RN5T618_CC_GAINREG0		0xfa
+#define RN5T618_CC_AVEREG1		0xfb
+#define RN5T618_CC_AVEREG0		0xfc
+#define RN5T618_MAX_REG			0xfc
+
+#define RN5T618_REPCNT_REPWRON		BIT(0)
+#define RN5T618_SLPCNT_SWPWROFF		BIT(0)
+#define RN5T618_WATCHDOG_WDOGEN		BIT(2)
+#define RN5T618_WATCHDOG_WDOGTIM_M	(BIT(0) | BIT(1))
+#define RN5T618_WATCHDOG_WDOGTIM_S	0
+#define RN5T618_PWRIRQ_IR_WDOG		BIT(6)
+
+enum {
+	RN5T618_DCDC1,
+	RN5T618_DCDC2,
+	RN5T618_DCDC3,
+	RN5T618_LDO1,
+	RN5T618_LDO2,
+	RN5T618_LDO3,
+	RN5T618_LDO4,
+	RN5T618_LDO5,
+	RN5T618_LDORTC1,
+	RN5T618_LDORTC2,
+	RN5T618_REG_NUM,
+};
+
+struct rn5t618 {
+	struct regmap *regmap;
+};
+
+#endif /* __LINUX_MFD_RN5T618_H */
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -155,6 +155,7 @@ struct ti_tscadc_dev {
 	void __iomem *tscadc_base;
 	int irq;
 	int used_cells;	/* 1-2 */
+	int tsc_wires;
 	int tsc_cell;	/* -1 if not used */
 	int adc_cell;	/* -1 if not used */
 	struct mfd_cell cells[TSCADC_CELLS];

--- a/include/linux/mfd/ti_ssp.h
+++ b/include/linux/mfd/ti_ssp.h
-/*
- * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
- *
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __TI_SSP_H__
-#define __TI_SSP_H__
-
-struct ti_ssp_dev_data {
-	const char	*dev_name;
-	void		*pdata;
-	size_t		pdata_size;
-};
-
-struct ti_ssp_data {
-	unsigned long		out_clock;
-	struct ti_ssp_dev_data	dev_data[2];
-};
-
-struct ti_ssp_spi_data {
-	unsigned long	iosel;
-	int		num_cs;
-	void		(*select)(int cs);
-};
-
-/*
- * Sequencer port IO pin configuration bits.  These do not correlate 1-1 with
- * the hardware.  The iosel field in the port data combines iosel1 and iosel2,
- * and is therefore not a direct map to register space.  It is best to use the
- * macros below to construct iosel values.
- *
- * least significant 16 bits --> iosel1
- * most significant 16 bits  --> iosel2
- */
-
-#define SSP_IN			0x0000
-#define SSP_DATA		0x0001
-#define SSP_CLOCK		0x0002
-#define SSP_CHIPSEL		0x0003
-#define SSP_OUT			0x0004
-#define SSP_PIN_SEL(pin, v)	((v) << ((pin) * 3))
-#define SSP_PIN_MASK(pin)	SSP_PIN_SEL(pin, 0x7)
-#define SSP_INPUT_SEL(pin)	((pin) << 16)
-
-/* Sequencer port config bits */
-#define SSP_EARLY_DIN		BIT(8)
-#define SSP_DELAY_DOUT		BIT(9)
-
-/* Sequence map definitions */
-#define SSP_CLK_HIGH		BIT(0)
-#define SSP_CLK_LOW		0
-#define SSP_DATA_HIGH		BIT(1)
-#define SSP_DATA_LOW		0
-#define SSP_CS_HIGH		BIT(2)
-#define SSP_CS_LOW		0
-#define SSP_OUT_MODE		BIT(3)
-#define SSP_IN_MODE		0
-#define SSP_DATA_REG		BIT(4)
-#define SSP_ADDR_REG		0
-
-#define SSP_OPCODE_DIRECT	((0x0) << 5)
-#define SSP_OPCODE_TOGGLE	((0x1) << 5)
-#define SSP_OPCODE_SHIFT	((0x2) << 5)
-#define SSP_OPCODE_BRANCH0	((0x4) << 5)
-#define SSP_OPCODE_BRANCH1	((0x5) << 5)
-#define SSP_OPCODE_BRANCH	((0x6) << 5)
-#define SSP_OPCODE_STOP		((0x7) << 5)
-#define SSP_BRANCH(addr)	((addr) << 8)
-#define SSP_COUNT(cycles)	((cycles) << 8)
-
-int ti_ssp_raw_read(struct device *dev);
-int ti_ssp_raw_write(struct device *dev, u32 val);
-int ti_ssp_load(struct device *dev, int offs, u32* prog, int len);
-int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output);
-int ti_ssp_set_mode(struct device *dev, int mode);
-int ti_ssp_set_iosel(struct device *dev, u32 iosel);
-
-#endif /* __TI_SSP_H__ */
--- a/include/linux/mfd/tps65217.h
+++ b/include/linux/mfd/tps65217.h
@@ -60,6 +60,8 @@
 #define TPS65217_REG_SEQ5		0X1D
 #define TPS65217_REG_SEQ6		0X1E

+#define TPS65217_REG_MAX		TPS65217_REG_SEQ6
+
 /* Register field definitions */
 #define TPS65217_CHIPID_CHIP_MASK	0xF0
 #define TPS65217_CHIPID_REV_MASK	0x0F

--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2560,6 +2560,7 @@
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
 #define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB	0x095E
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_CENTERTON_ILB	0x0c60

--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -1220,7 +1220,7 @@ static int arizona_hw_params_rate(struct snd_pcm_substream *substream,
 		break;
 	case ARIZONA_CLK_ASYNCCLK:
 		snd_soc_update_bits(codec, ARIZONA_ASYNC_SAMPLE_RATE_1,
-				    ARIZONA_ASYNC_SAMPLE_RATE_MASK, sr_val);
+				    ARIZONA_ASYNC_SAMPLE_RATE_1_MASK, sr_val);
 		if (base)
 			snd_soc_update_bits(codec, base + ARIZONA_AIF_RATE_CTRL,
 					    ARIZONA_AIF1_RATE_MASK,