提交 fc8a350d 编写于 作者: I Ilan Peer 提交者: Emmanuel Grumbach

iwlwifi: pcie: fix tracking of cmd_in_flight

The cmd_in_flight tracking was introduced to workaround faulty
power management hardware, by having the driver keep the NIC
awake as long as there are commands in flight. However, some of
the code handling this workaround was unconditionally executed,
which resulted with an inconsistent state where the driver assumed
that the NIC was awake although it wasn't.

Fix this by renaming 'cmd_in_flight' to 'cmd_hold_nic_awake' and
handling the NIC requested awake state only for hardwares for
which the workaround is needed.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
上级 29220891
/******************************************************************************
*
* Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright(c) 2003 - 2015 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
......@@ -320,7 +320,7 @@ struct iwl_trans_pcie {
/*protect hw register */
spinlock_t reg_lock;
bool cmd_in_flight;
bool cmd_hold_nic_awake;
bool ref_cmd_in_flight;
/* protect ref counter */
......
......@@ -1372,7 +1372,7 @@ static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent,
spin_lock_irqsave(&trans_pcie->reg_lock, *flags);
if (trans_pcie->cmd_in_flight)
if (trans_pcie->cmd_hold_nic_awake)
goto out;
/* this bit wakes up the NIC */
......@@ -1438,7 +1438,7 @@ static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans,
*/
__acquire(&trans_pcie->reg_lock);
if (trans_pcie->cmd_in_flight)
if (trans_pcie->cmd_hold_nic_awake)
goto out;
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
......
......@@ -1039,18 +1039,14 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans,
iwl_trans_pcie_ref(trans);
}
if (trans_pcie->cmd_in_flight)
return 0;
trans_pcie->cmd_in_flight = true;
/*
* wake up the NIC to make sure that the firmware will see the host
* command - we will let the NIC sleep once all the host commands
* returned. This needs to be done only on NICs that have
* apmg_wake_up_wa set.
*/
if (trans->cfg->base_params->apmg_wake_up_wa) {
if (trans->cfg->base_params->apmg_wake_up_wa &&
!trans_pcie->cmd_hold_nic_awake) {
__iwl_trans_pcie_set_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
......@@ -1064,10 +1060,10 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans,
if (ret < 0) {
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
trans_pcie->cmd_in_flight = false;
IWL_ERR(trans, "Failed to wake NIC for hcmd\n");
return -EIO;
}
trans_pcie->cmd_hold_nic_awake = true;
}
return 0;
......@@ -1085,15 +1081,14 @@ static int iwl_pcie_clear_cmd_in_flight(struct iwl_trans *trans)
iwl_trans_pcie_unref(trans);
}
if (WARN_ON(!trans_pcie->cmd_in_flight))
return 0;
trans_pcie->cmd_in_flight = false;
if (trans->cfg->base_params->apmg_wake_up_wa) {
if (WARN_ON(!trans_pcie->cmd_hold_nic_awake))
return 0;
if (trans->cfg->base_params->apmg_wake_up_wa)
trans_pcie->cmd_hold_nic_awake = false;
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册