power: supply: axp288_fuel_gauge: Remove debugfs support

The debugfs code is simply just dumping a bunch of registers, the same
information can also easily be gotten through the regmap debugfs
interface or through the i2cdump utility.

I've not used the debugfs interface once in all these years that I've
been working on the axp288_fuel_gauge driver, so lets just remove it.

Note this also removes the temperature-channels from the list of
IIO ADC channels used by the driver, since these were only used in the
debugfs interface.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.com>

drivers/power/supply/axp288_fuel_gauge.c

@@ -19,8 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/iio/consumer.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
 #include <asm/unaligned.h>
 
 #define PS_STAT_VBUS_TRIGGER			(1 << 0)
@@ -98,9 +96,6 @@ enum {
 };
 
 enum {
-	BAT_TEMP = 0,
-	PMIC_TEMP,
-	SYSTEM_TEMP,
 	BAT_CHRG_CURR,
 	BAT_D_CURR,
 	BAT_VOLT,
@@ -204,119 +199,6 @@ static int fuel_gauge_read_12bit_word(struct axp288_fg_info *info, int reg)
 	return (buf[0] << 4) | ((buf[1] >> 4) & 0x0f);
 }
 
-#ifdef CONFIG_DEBUG_FS
-static int fuel_gauge_debug_show(struct seq_file *s, void *data)
-{
-	struct axp288_fg_info *info = s->private;
-	int raw_val, ret;
-
-	seq_printf(s, " PWR_STATUS[%02x] : %02x\n",
-		AXP20X_PWR_INPUT_STATUS,
-		fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS));
-	seq_printf(s, "PWR_OP_MODE[%02x] : %02x\n",
-		AXP20X_PWR_OP_MODE,
-		fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE));
-	seq_printf(s, " CHRG_CTRL1[%02x] : %02x\n",
-		AXP20X_CHRG_CTRL1,
-		fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1));
-	seq_printf(s, "       VLTF[%02x] : %02x\n",
-		AXP20X_V_LTF_DISCHRG,
-		fuel_gauge_reg_readb(info, AXP20X_V_LTF_DISCHRG));
-	seq_printf(s, "       VHTF[%02x] : %02x\n",
-		AXP20X_V_HTF_DISCHRG,
-		fuel_gauge_reg_readb(info, AXP20X_V_HTF_DISCHRG));
-	seq_printf(s, "    CC_CTRL[%02x] : %02x\n",
-		AXP20X_CC_CTRL,
-		fuel_gauge_reg_readb(info, AXP20X_CC_CTRL));
-	seq_printf(s, "BATTERY CAP[%02x] : %02x\n",
-		AXP20X_FG_RES,
-		fuel_gauge_reg_readb(info, AXP20X_FG_RES));
-	seq_printf(s, "    FG_RDC1[%02x] : %02x\n",
-		AXP288_FG_RDC1_REG,
-		fuel_gauge_reg_readb(info, AXP288_FG_RDC1_REG));
-	seq_printf(s, "    FG_RDC0[%02x] : %02x\n",
-		AXP288_FG_RDC0_REG,
-		fuel_gauge_reg_readb(info, AXP288_FG_RDC0_REG));
-	seq_printf(s, "     FG_OCV[%02x] : %04x\n",
-		AXP288_FG_OCVH_REG,
-		fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG));
-	seq_printf(s, " FG_DES_CAP[%02x] : %04x\n",
-		AXP288_FG_DES_CAP1_REG,
-		fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG));
-	seq_printf(s, "  FG_CC_MTR[%02x] : %04x\n",
-		AXP288_FG_CC_MTR1_REG,
-		fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG));
-	seq_printf(s, " FG_OCV_CAP[%02x] : %02x\n",
-		AXP288_FG_OCV_CAP_REG,
-		fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG));
-	seq_printf(s, "  FG_CC_CAP[%02x] : %02x\n",
-		AXP288_FG_CC_CAP_REG,
-		fuel_gauge_reg_readb(info, AXP288_FG_CC_CAP_REG));
-	seq_printf(s, " FG_LOW_CAP[%02x] : %02x\n",
-		AXP288_FG_LOW_CAP_REG,
-		fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG));
-	seq_printf(s, "TUNING_CTL0[%02x] : %02x\n",
-		AXP288_FG_TUNE0,
-		fuel_gauge_reg_readb(info, AXP288_FG_TUNE0));
-	seq_printf(s, "TUNING_CTL1[%02x] : %02x\n",
-		AXP288_FG_TUNE1,
-		fuel_gauge_reg_readb(info, AXP288_FG_TUNE1));
-	seq_printf(s, "TUNING_CTL2[%02x] : %02x\n",
-		AXP288_FG_TUNE2,
-		fuel_gauge_reg_readb(info, AXP288_FG_TUNE2));
-	seq_printf(s, "TUNING_CTL3[%02x] : %02x\n",
-		AXP288_FG_TUNE3,
-		fuel_gauge_reg_readb(info, AXP288_FG_TUNE3));
-	seq_printf(s, "TUNING_CTL4[%02x] : %02x\n",
-		AXP288_FG_TUNE4,
-		fuel_gauge_reg_readb(info, AXP288_FG_TUNE4));
-	seq_printf(s, "TUNING_CTL5[%02x] : %02x\n",
-		AXP288_FG_TUNE5,
-		fuel_gauge_reg_readb(info, AXP288_FG_TUNE5));
-
-	ret = iio_read_channel_raw(info->iio_channel[BAT_TEMP], &raw_val);
-	if (ret >= 0)
-		seq_printf(s, "axp288-batttemp : %d\n", raw_val);
-	ret = iio_read_channel_raw(info->iio_channel[PMIC_TEMP], &raw_val);
-	if (ret >= 0)
-		seq_printf(s, "axp288-pmictemp : %d\n", raw_val);
-	ret = iio_read_channel_raw(info->iio_channel[SYSTEM_TEMP], &raw_val);
-	if (ret >= 0)
-		seq_printf(s, "axp288-systtemp : %d\n", raw_val);
-	ret = iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], &raw_val);
-	if (ret >= 0)
-		seq_printf(s, "axp288-chrgcurr : %d\n", raw_val);
-	ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &raw_val);
-	if (ret >= 0)
-		seq_printf(s, "axp288-dchrgcur : %d\n", raw_val);
-	ret = iio_read_channel_raw(info->iio_channel[BAT_VOLT], &raw_val);
-	if (ret >= 0)
-		seq_printf(s, "axp288-battvolt : %d\n", raw_val);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(fuel_gauge_debug);
-
-static void fuel_gauge_create_debugfs(struct axp288_fg_info *info)
-{
-	info->debug_file = debugfs_create_file("fuelgauge", 0666, NULL,
-		info, &fuel_gauge_debug_fops);
-}
-
-static void fuel_gauge_remove_debugfs(struct axp288_fg_info *info)
-{
-	debugfs_remove(info->debug_file);
-}
-#else
-static inline void fuel_gauge_create_debugfs(struct axp288_fg_info *info)
-{
-}
-static inline void fuel_gauge_remove_debugfs(struct axp288_fg_info *info)
-{
-}
-#endif
-
 static void fuel_gauge_get_status(struct axp288_fg_info *info)
 {
 	int pwr_stat, fg_res, curr, ret;
@@ -753,9 +635,6 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
 	struct power_supply_config psy_cfg = {};
 	static const char * const iio_chan_name[] = {
-		[BAT_TEMP] = "axp288-batt-temp",
-		[PMIC_TEMP] = "axp288-pmic-temp",
-		[SYSTEM_TEMP] = "axp288-system-temp",
 		[BAT_CHRG_CURR] = "axp288-chrg-curr",
 		[BAT_D_CURR] = "axp288-chrg-d-curr",
 		[BAT_VOLT] = "axp288-batt-volt",
@@ -844,7 +723,6 @@ static int axp288_fuel_gauge_probe(struct platform_device *pdev)
 		goto out_free_iio_chan;
 	}
 
-	fuel_gauge_create_debugfs(info);
 	fuel_gauge_init_irq(info);
 
 	return 0;
@@ -869,7 +747,6 @@ static int axp288_fuel_gauge_remove(struct platform_device *pdev)
 	int i;
 
 	power_supply_unregister(info->bat);
-	fuel_gauge_remove_debugfs(info);
 
 	for (i = 0; i < AXP288_FG_INTR_NUM; i++)
 		if (info->irq[i] >= 0)