提交 faf1627a 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Move tg3_change_mtu to a better location

This patch moves tg3_change_mtu to a better location.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 9a21fb8f
......@@ -6922,69 +6922,6 @@ static int tg3_set_features(struct net_device *dev, netdev_features_t features)
return 0;
}
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
int new_mtu)
{
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN) {
if (tg3_flag(tp, 5780_CLASS)) {
netdev_update_features(dev);
tg3_flag_clear(tp, TSO_CAPABLE);
} else {
tg3_flag_set(tp, JUMBO_RING_ENABLE);
}
} else {
if (tg3_flag(tp, 5780_CLASS)) {
tg3_flag_set(tp, TSO_CAPABLE);
netdev_update_features(dev);
}
tg3_flag_clear(tp, JUMBO_RING_ENABLE);
}
}
static int tg3_restart_hw(struct tg3 *tp, int reset_phy);
static int tg3_halt(struct tg3 *, int, int);
static int tg3_change_mtu(struct net_device *dev, int new_mtu)
{
struct tg3 *tp = netdev_priv(dev);
int err;
if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp))
return -EINVAL;
if (!netif_running(dev)) {
/* We'll just catch it later when the
* device is up'd.
*/
tg3_set_mtu(dev, tp, new_mtu);
return 0;
}
tg3_phy_stop(tp);
tg3_netif_stop(tp);
tg3_full_lock(tp, 1);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_set_mtu(dev, tp, new_mtu);
err = tg3_restart_hw(tp, 0);
if (!err)
tg3_netif_start(tp);
tg3_full_unlock(tp);
if (!err)
tg3_phy_start(tp);
return err;
}
static void tg3_rx_prodring_free(struct tg3 *tp,
struct tg3_rx_prodring_set *tpr)
{
......@@ -12040,6 +11977,84 @@ static const struct ethtool_ops tg3_ethtool_ops = {
.set_rxfh_indir = tg3_set_rxfh_indir,
};
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
int new_mtu)
{
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN) {
if (tg3_flag(tp, 5780_CLASS)) {
netdev_update_features(dev);
tg3_flag_clear(tp, TSO_CAPABLE);
} else {
tg3_flag_set(tp, JUMBO_RING_ENABLE);
}
} else {
if (tg3_flag(tp, 5780_CLASS)) {
tg3_flag_set(tp, TSO_CAPABLE);
netdev_update_features(dev);
}
tg3_flag_clear(tp, JUMBO_RING_ENABLE);
}
}
static int tg3_change_mtu(struct net_device *dev, int new_mtu)
{
struct tg3 *tp = netdev_priv(dev);
int err;
if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp))
return -EINVAL;
if (!netif_running(dev)) {
/* We'll just catch it later when the
* device is up'd.
*/
tg3_set_mtu(dev, tp, new_mtu);
return 0;
}
tg3_phy_stop(tp);
tg3_netif_stop(tp);
tg3_full_lock(tp, 1);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_set_mtu(dev, tp, new_mtu);
err = tg3_restart_hw(tp, 0);
if (!err)
tg3_netif_start(tp);
tg3_full_unlock(tp);
if (!err)
tg3_phy_start(tp);
return err;
}
static const struct net_device_ops tg3_netdev_ops = {
.ndo_open = tg3_open,
.ndo_stop = tg3_close,
.ndo_start_xmit = tg3_start_xmit,
.ndo_get_stats64 = tg3_get_stats64,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_rx_mode = tg3_set_rx_mode,
.ndo_set_mac_address = tg3_set_mac_addr,
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
.ndo_fix_features = tg3_fix_features,
.ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
};
static void __devinit tg3_get_eeprom_size(struct tg3 *tp)
{
u32 cursize, val, magic;
......@@ -15409,24 +15424,6 @@ static void __devinit tg3_init_coal(struct tg3 *tp)
}
}
static const struct net_device_ops tg3_netdev_ops = {
.ndo_open = tg3_open,
.ndo_stop = tg3_close,
.ndo_start_xmit = tg3_start_xmit,
.ndo_get_stats64 = tg3_get_stats64,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_rx_mode = tg3_set_rx_mode,
.ndo_set_mac_address = tg3_set_mac_addr,
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
.ndo_fix_features = tg3_fix_features,
.ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
};
static int __devinit tg3_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册